Technical names for objects within RSA1

Hi!
I cannot see in tcode RSA1 --> BI CONT --> Object Types --> Queries the technical names of the objects
When I search for 0TCT_MC21* as query, no results can be shown.
How can I change these settings in order to see the technical names of the objects as well?
Any helpful information will be very appreciated
Holger

Hi,
When you click on select objects there is an icon which says Technical Names on/off. This will show the objects with technicakl names.
Amith

Similar Messages

The technical name of object QVIW zabcd is not valid

Hello Gurus
I am facing a weird problem.
I run a query it works fine but when I try to save the view by right click -- save view it ask me for the Description and Technical name after putting this information I press save. Istead of saving it it gives me error "The technical name of object QVIW zabcd is not valid"
Please help me asap
Our system is on SP18 both for abap and Java

Hi Bala Duwuri,
Thanks for the input...
Can you please give me your valuable inputs on this ........
I have a standalone custom web dynpro application which needs to be linked to standard team viewer application.
What I want is I should be able to select the employee from the Team Viewer iView and supply the information to the Custom Application so that it gives me output based on that.
Right now am following the below link But in that no where they were talking about the webdynpro eventing.
then how come two views will get linked fucntionally so that team viewer will pass the information to my custom WD application??????????????????? Please help
Please give me a clear view on how to integrate the team viewer application with custom development WD application.
If code is required pls provide that also.............
I would appreciate the useful inputs with higher points.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/how%2bto%2bread%2binformation%2bfrom%2bthe%2bteamviewer%2bin%2bweb%2bdynpro
Thanks in Advance,
Dharani

Authorization check on technical name for statistical key figures

Dear experts,
I need an authorization check on the technical name for statistical key figures. I would like to avoid that local users can change/modify centrally defined key figures which follow a given naming convention.
I checked the authorization object K_KA03 for statistical key figures but this doesn't help as it only checks controlling area and activity. I also couldn't find the technical name as an authorization field.
What can I do to set up an authorization check on the technical name of the statistical key figure if it is not foreseen in the standard?
Thanks for any ideas,
René

Try something in similar lines as suggested in below link:
https://wiki.sdn.sap.com/wiki/display/PLM/COValidationstoadditionalauthorisations+checks
Regards
Sreenivas

Technical names for drop down values through webui

Hi All, I have ECC 6.0 (SAPKH61705) transactions being launched in CRM 7.0 (SAPKU71305) through the transaction launcher. We are able to display technical names for values in ECC through the gui, and in CRM in both the gui and webui. Is it possible to display the technical names for ECC through the webui? Apologies if this is not the correct forum, I was not sure where to post. For further clarification of the issue, I hope these screen shots assist: ECC gui with 'display technical names' activated: qui - tech names on.jpg CRM webUI with 'display technical names' activated in both ECC and CRM: webui - tech names not visible.jpg Assistance appreciated.

Hi Amy,
Yes, it's possible.
You can achieve it by coding. Instead of passing only the description to your drop down values, we can send technical name and description simultaneously to your drop down value. That's it.
BR,
RAM.

Data target technical name for a query

Hi
Can some one tell me how to find the respective data target technical name for a report (query)?
Thanks
Abhi

Hi,
Create a View on tables RSZCOMPDIR and RSZCOMPIC and take fields INFOCUBE,COMPID and keep join condition
1) RSZCOMPDIR-COMPUID = RSZCOMPIC-COMPUID.
2) RSZCOMPDIR-COMPUID = RSZELTDIR-ELTUID.
and keep condition RSZELTDIR-DEFTP = 'REP'.
With rgds,
Anil Kumar Sharma .P
Message was edited by: Anil Kumar Sharma
Message was edited by: Anil Kumar Sharma

Inputting technical name for varaints in portal makes it viewable to all

Hello all, we are BI 7.0 using Portal for reporting
This is the issue I am facing, when an user is trying to save a varaint for any particular query it asks for description and technical name. Now if the user only enters description and not tech name still the system accepts it and it works fine. If user inputs both the fields still it works fine. But now the difference is that if the user has entered technical name than that varaint can be viewed by all the users kind off like global variant for everyone; and if the user only inputs description than only the user that created the varaint can see it.
So i just want to take away the technical name box from that screen; where/which template do I need to modify? I am using 0ANALYSIS_PATTERN for reporting.
Is there any other work around for this or information that i am missing and i am seeing such behavior can someone explain.
Thanks in advance

Hi guys,
Thanks for your answers first of all.
I don't want to store the technical name of the openhub in the logical file name....i want this to be determined dynamically, depending on the openhub that is used with this logical file name.
I was wondering were i can fetch the openhub technical name during the execution of the DTP on the openhub / when also the function module FILE_GET_NAME is being ran.
Let me know!
Thanks in advance!
Regards,
Freek

Using variable names for object names

Is there any way you can use a String variable to name an object? I.e., something like:
String name = "objectName";
\\ create an Image object named objectName
Image (name.valueOf()) = new Image();
This code obviously does not work, but I'm working on a map applet which uses a map composed of thousands of tiles, and then shows only a portion of the map by drawing the appropriate tiles into the window using the x/y coordinates and a nested for loop to determine which tiles to draw. However, unless I want to manually declare and then call each of these Image objects, I need to have a way to have the actual name of each image object be a reference to a variable, which I will then initalize according to the name of the tile I'm using. Does that make sense at all? Anyway, I was just wondering if anyone knows of any way to do this. Thanks.
-Ari

Typically this is done using a Collection, for example:
Image[] img = new Image[100];
for (int i=0; i<img.length;i++)
img[i] = new Image();... Sort of thing.

Technical name for formula in query designer

Hi,
We have created some formulas in Query Designer.
We tried to assign the technical names to these existing formulas, it goes away as the save button on the top of the pop up is disabled.
Is there a way to assign technical names of the formulas created in the query designer.
Regards,
Charu

Charu Pandey,
Formulas are local, means available for particular queries only. No technical name.
Create Calculated keyfigures instead of formulas..., so you can save with technical names.
To display technical name in query, give discription same as technical name.
Hope it Helps
Srini

Technical name for a lower 3rd? (off topic)

This is a bit of a random question, but I remember reading/hearing before a technical term for a lower 3rd. I totally forgot what it was, think it might've started with a T :S. I think it was a term used for a graphic that would go behind the text in a lower 3rd. Anyone have any ideas? It's suddenly been nagging on my mind lol.

And back a hundred years ago, we called them title cards. There was a time when you had to get all your titles (main, lower thirds, subtitles etc) hot pressed white on black, on heavy glossy card stock. These went to the optical house, who put them on the animation stand and shot the proper length plus some, so that either a negative matcher could cut them into c and d rolls (a and b being pix negative rolls) or they could be incorporated into the optical workflow-- sandwiched in the printer with the negative for more complicated processes. You had to know beforehand what the workflow was, so you could shoot interpositives, negatives, internegatives or the ok but very short lived CRI process. All in all, in intensive, expensive process.
Here endeth today's history lesson.
Aside: today everyone whines because their instantly generated text doesn't seem right. Ugh.

Display Technical Names for al users

Hi
My requirement is: Every user should able to see SAP Technical Names after he/she login. What is the global parameter we need setup and where? Normally individual user can setup by selecting Extras -> Settings --> Technical Names On
Thank you,
Mohan

Hi,
those settings are stored in table AGR_DATEU where ID = 'BROWSER_OPT' and UNAME is user name. I don't know about any global parameter. There are two FMs PRGN_SET_BROWSER_OPTIONS_USER and PRGN_GET_BROWSER_OPTIONS_USER which you can use to write a report which will set this parameter to all users.
Cheers

Table name for objects

Hi all,
is der any table where i can find the objects created by particular user in bw. I mean if i give user name can i find the total objects by him
regards

Hi,
You can refer RSDIOBJ   Table which is Directory of all InfoObjects..
other relevant tables....
RSDIOBJT     Texts of InfoObjects
RSDIOBJ       Directory of all InfoObjects
RSDIOBJT     Texts of InfoObjects
RSDATRNAV     Navigation Attributes
RSDATRNAVT     Navigation Attributes
RSDBCHATR     Master Data Attributes
RSDCHABAS     Basic Characteristics (for Characteristics,Time Characteristics, and Units)
RSDCHA      Characteristics Catalog
RSDDPA     Data Package Characteristic
RSDIOBJCMP     Dependencies of InfoObjects
RSKYF      Key Figures
RSDTIM     Time Characteristics
RSDUNI     Units
Regards,
Umesh

Find query technical name for a deleted query/workbook in the User Menu

Hi,
When a BEx workbook or BEx query is published in a role, people with that role will see the query / workbook in their user menu.
It is possible to change the caption/title of the 'node' in the user menu so it does not necessarily have the same name as the report.
I am now in a situation where a user tries to run a query/workbook from the user menu, and runs in an error message 'query does not exist on server'.
How can I found out to which query/workbook a node in the user menu refers?
I have tried the Metadata repository but because of the many nodes in the user menu this is a laborious task.
I was hoping to find a table where I could use the role name and node name to find the 'target' report but I haven't been able to find such a table.
Any (other) suggestions?
Many thanks,
Jan.

Hi,
You can publish the workbook to the role and as user have access to the role he can access the workbook also.
Regards,
Kams

Technical names are appearing in OVS pop-up for buttons.

HI Experts,
I have used OVS help in my application, I have deployed and tested it on local WAS where everything works fine.
But, when i access it from portal deployed on staging server, the OVS popup window shows technical names for buttons e.g for Go it shows "view.MainView.gr.c.tc.goSearch.text", same is for Exit button.
Could you please tell me where can be mistake and what are corrective measures?
regards,
abhijeet

Hi,
You will need to open an OSS message for the same under BC-WD-JAV-RUN component. This is an issue with the NW WAS version that you are running. You can find a similar issue [here|OVS - Buttons without correct label].
Regards,
Satyajit.

Error while saving Views in Portal - Technical name not valid.

Hi,
When saving Views in Portal, I'm getting the message The Technical name of object QVIW is not valid. I've searched the forums but couldn't find any solution to this issue. We are on SP 16. Any help would be appreciated.
Thanks & Regards,
Hari

Dear Harikrishna,
while saving iviews in portal..
it will prompt for some mandetory columns is it.. one is for description..
and the iview name like iv<name of the template>.. this should be without space..
and in the next page u should give technical name of the template as 'template=<name of the template'
in this you should not give any space..finish and save the ivew..
hope this would help you.

How can i find technical name of varaibles in query 0T_FYEAR

Hi all,
I am trying to transport my bex objects (query and structures and stuff) from dev to QA.
I had one previous transport from dev to qa and now I have two varaibles 0T_FYEAR and 0P_FYEAR.
And these two varaibles have the earlier reuqest number so I want to delete then from that request and then add to the new request I am trying to create.
But in the old request I dont see these two elements how can i check the technical names for that. I see two different entries in that request which are something like
R3TRELEM2477EPQ40PB73OI4A73SI20IH rest all are starting with 43.....
Can some one help out.
Thanks in advance

Hi Raj,
You can try looking up those IDs in SE16 > V_ELTDIR_TXT to recognise which is which.
Hope this helps...

Technical names for objects within RSA1

Similar Messages

Maybe you are looking for