Technical names of column shown after POWL_D01

Hi
After we have executed POWL_D01 all column for the Queries are shown with technical names.
After first load the column description comes correctly in.
Does anyone know a report or somehow we can update this before the business user takes in use?
We cannot use POWL_WLOAD because query does not exist yet after POWL_D01.
BS
Henrik

I suspect this is due to some memory residue for the metadata. I'd suggest that you try to run transaction SHMM to clear the memory area or run report /SAPSRM/PDO_META_INVALID_CONF for the same purpose. Then check to see if you can see proper column descriptions.

Similar Messages

Queries inactive in Production Technical name is not coming After Transport

Hi Folks,
i transported queries with role into production .
There queries are coming without their technical name means b'coze its related data-target was not active but now its active even then queries are not coming with their technical name.
So can we do any manual activation in production or should i go for re-import the same req again into production.
Plz Suggest me

Hi Rajan,
You can do manual activation in production and you can change the technical names of your queries in production.
Thanks and Kind Regards,
Lakshman Kumar Ghattamaneni

Smartview 11.1.2.102 - Hidden columns shown after refresh

I've been working with an older version of Smartview for about one year. Last week we upgraded to version 11.1.2.102.
Issue:*
Whenever I refresh a table, Excel formattings like hidden rows or columns are shown again. This is extremely annoying, as I am responsible for the monthly reporting in our group and all my standard reports are destroyed.
Colours and number formats, however, remain the same.
Has anyone a solution to this problem?

I am with you does anyone know how to hide the grouping from refreshing in smartview. Everytime I refresh the grouping is then expanded. I want it collapsed.

In the filter the value of text variable is not shown, only technical name.

Hi All,
We have some odd behavior of text variables in the filter screen of key-figures.
After entering values in the variable screen, the report is executed.
Within the report all text variables are filled, with the values entered in the variable screen.
I say all, because we use both sap standard variables &0T_FPER& as customer specific &ZFSCYR&.
When i want to change the key figures showned, i press the filter icon for key-figures (BW 3.5)
In the list shown: existing filtervalues, the textvariables of SAP standard are filled with the value entered in the variable screen. However the customer specific is shown with the technical name (&ZFSCYR&) and not the value.
Has anyone experience with this behavior or even better a solution to prevent this?
As allways, each usefull answer points assigned!
Regards,
René

Hi Rene,
If ur custom text variable is not getting populated then you need to check out the code that u have written in there in CMOD for this and ofcourse if ur using this text variable after report execution then it will definately be in i_step 2.
So best way is to debug your code and check that using code RSRT.
Thanks
Dipika

Make appear technical name and name of a query in separates columns

Hello everybody,
I have a question about menus of the Bex explorer (but maybe it's related to any menus of SAP).
I would like to show the technical name of a query or a workbook in a single column, something like :
Technical name | Name of the query/workbook | Last modification
For now, I can only the technical name or the name (or both side by side) but I can't have three separated columns.
Is there any mean you know to do this ?
Regards,
Julien DERIOT

Thanks for your quick answer but it's not exactly what I'm looking for.
When I speak about the bex, I mean when you click on the icon to open a query/workbook, you see all of them inside a window.
Actually, I can see :
Name workbook | Last changed on
And I would like to see :
Technical name | Name workbook | Last changed on

Change of technical name after transport

I found some of the technical names of dtp's are changed after transport from development system to quality and not all dtps names are changed..
Is there any specific reason that some dtps technical names are changed after transport and some not changed?
And there are any more proceess type that change when they are transported ?
Thanks
vamsi

Hai thats correct techincal name of DTP's change after successful transport from dev - quality or any instance for that matter .Its quiet normal in BI 7 infact a bug which we too found intially .
Goodday.
Edited by: SapBuddy on Oct 7, 2008 7:19 PM

Finding out the field name from the columns shown on the screen

Hi,
I am new to CRMOD.
I see a lot of columns shown on the screen, say in the Account object.
Is there a way to find out which column in the Detail screen maps to which exact field in the Admin page ?
Appreciate all the help
Regards

If you go to Admin > Application Customization > Account > Account Field Setup, you will see the list of all the fields. If you have custom fields, then click on the Rename button on the top left corner of the page, and then Advanced and it will show you the ITAGs of the fields.
Since you are new to CRMOD, play around with it and also read the help file and you would understand the app a lot better
Udaya

Names of column appearing in alv output after changing layout in alvgrid?

Hi all
I have a requirement where I am displaying 20 fields using alv grid(cl_gui_alv_grid). Now each time when I run I can change layout and can display any number of columns in output using change layout option.
My requirement is i need to know the column names of the fields which are displayed upon changing layout in output. Using this column names I have to write some logic in code. Each time number of column may vary as per the user selection. Is there any method or way to get the names of columns selected in output display?
Please help me in this regard.

Hi,
During run time you will get the ALV layout info using this function module.
REUSE_ALV_GRID_LAYOUT_INFO_GET
Regards,
Anversha

Display technical name of a query in a web template ?

Hi,
I try to display in a basic web template the technical name of my query with a web item. In this order, I have tried to use the web item 'Text Elements' but how could I configure the latter in order to have only the technical name ?
I have selected 'Display General Text Elements' in properties of the web item.
In the property 'List of Text Elements', what is the couple of values that I have to configure ?
Many thanks,
CG.

Hi,
What you need to do is, keep a TEXT Web Item in the template.
Then do not tick any of the options under Specific. Instead, go to List of Text Elements. In the first column, select General Text Symbol. In the next column type REPTNAME.
This will give the technical name of the query in the output.
Common text elements:
u2212 technical name of the query (REPTNAME)
u2212 description of the query (REPTXTLG)
u2212 InfoProvider (INFOCUBE)
u2212 key date for the query (SRDATE)
u2212 accuracy of the data (date and time) (ROLLUPTIME)
u2212 the person who wrote the query (AUTHOR)
u2212 the last time the query was changed (date and time)
(MODTIME)
u2212 the last person to make changes to the query (MODUSER)
u2212 current user (SYUSER)
u2212 the last time the query was refreshed (date and time)
(SYUZEIT)
Try this. Hope it helps.

Error while saving Views in Portal - Technical name not valid.

Hi,
When saving Views in Portal, I'm getting the message The Technical name of object QVIW is not valid. I've searched the forums but couldn't find any solution to this issue. We are on SP 16. Any help would be appreciated.
Thanks & Regards,
Hari

Dear Harikrishna,
while saving iviews in portal..
it will prompt for some mandetory columns is it.. one is for description..
and the iview name like iv<name of the template>.. this should be without space..
and in the next page u should give technical name of the template as 'template=<name of the template'
in this you should not give any space..finish and save the ivew..
hope this would help you.

Two Technical Names with same Description in BW

Hi Experts,
Currently I am facing Problem in SAP BPC NW 7.5 one of Applications ( Profit And Loss Appl)
At Backend ( BW) I could observe that for P&L application 2 diff technical names with same description "PROFIT AND LOSS". We were not sure who created the other one. Prior to that there was no problem while fetching the data.
Before creation of 2nd Info Cube in BW, I was able to retrieve the values ( Transfer values from Fixed Cost & Revenue Forecast). However, after cretion of 2nd cube unable to see my data in PL reports.
Before deleting 2nd Cube in BW, I could see the data in backend in old Cube, but unable to retrieve data in BPC excel report.
Once I deleted the new PL infocube in BW where there was no data in that cube, still I was not able to retrieve the data in my old cube.
Request you to help me....
Thanks & Regards,
Hari

Hi Sanjeev,
If Appset transport happend twice, all applications should have come in BW. But in this case only PROFIT AND LOSS has got 2 diff tech names.
Hi Nilanjan.
Yes, both the cubes in Infoarea ( QA system) and we have not faced earlier this problem either in any other environments ( DEV or PROD).
Will DEV system appset transport will help to resolve this issue in QA since DEV & QA has same structure?
Regards,
Hari

The technical name of object QVIW zabcd is not valid

Hello Gurus
I am facing a weird problem.
I run a query it works fine but when I try to save the view by right click -- save view it ask me for the Description and Technical name after putting this information I press save. Istead of saving it it gives me error "The technical name of object QVIW zabcd is not valid"
Please help me asap
Our system is on SP18 both for abap and Java

Hi Bala Duwuri,
Thanks for the input...
Can you please give me your valuable inputs on this ........
I have a standalone custom web dynpro application which needs to be linked to standard team viewer application.
What I want is I should be able to select the employee from the Team Viewer iView and supply the information to the Custom Application so that it gives me output based on that.
Right now am following the below link But in that no where they were talking about the webdynpro eventing.
then how come two views will get linked fucntionally so that team viewer will pass the information to my custom WD application??????????????????? Please help
Please give me a clear view on how to integrate the team viewer application with custom development WD application.
If code is required pls provide that also.............
I would appreciate the useful inputs with higher points.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/how%2bto%2bread%2binformation%2bfrom%2bthe%2bteamviewer%2bin%2bweb%2bdynpro
Thanks in Advance,
Dharani

Why Key Figures no Technical Name?

Hello Experts,
I am checking 0FIAR_C03_Q0005 from BI content Query, In Columns why many Key Figures no Technical Name? I do not know the right key figure which corresponds to the left of the key figure, How to know ?
Image link: [http://www.itpub.net/viewthread.php?tid=1195549&page=1&extra=page%3D1|http://www.itpub.net/viewthread.php?tid=1195549&page=1&extra=page%3D1]
please let me know the solution, thanks for your help in advance.
Best Regards
Steve

thanks for your replay..
I using Query Desinger open query 0FIAR_C03_Q0005, I found all key figure the formula is same, I canu2019t find restrict condition, why is this?
How to create calculated key figures and restricted key figures in Bex Query Designer? Why some key figure is gray?
Key figure : Balance , click u2018editu2019 button, General -> Detail View , the formula is u2018[0DEB_CRE_LC]u2019+u2019[0DEB_CRE_LC]u2019
Key figure: 0 days., click u2018editu2019 button, General -> Detail View , the formula is u2018[0DEB_CRE_LC]u2019+u2019[0DEB_CRE_LC]u2019
Key figure: 1-30 days, click u2018editu2019 button, General -> Detail View , the formula is u2018[DEB_CRE_LC]u2019+u2019[0DEB_CRE_LC]u2019
Key figure: 31-60 days , click u2018editu2019 button, General -> Detail View , the formula is u2018[0DEB_CRE_LC]u2019+u2019[0DEB_CRE_LC]u2019
Key figure: 61-180 days, click u2018editu2019 button, General -> Detail View , the formula is u2018[0DEB_CRE_LC]u2019+u2019[0DEB_CRE_LC]u2019
Key figure: 181-365 days, click u2018editu2019 button, General -> Detail View , the formula is u2018[0DEB_CRE_LC]u2019+u2019[0DEB_CRE_LC]u2019
Key figure: >365 days, click u2018editu2019 button, General -> Detail View , the formula is u2018[0DEB_CRE_LC]u2019+u2019[0DEB_CRE_LC]u2019
Many thanks.
Best Reagrds
Steve

Can't change a Restricted Key Figure technical name in QD BEx 7.1.0

A few days ago I created a new Restricted Key Figure in Query Designer and it was autopopulated with a default technical name. So I immediately changed it to 'ZRNPVORDINTFACTPPP_FY'.
Now, today, I realized that the 'F' in the technical name is a typographical error and I need to remove it. I clicked the Restricted Key Figure on the left from within the list and clicked the Change/Display pencil icon in the properties window, but the Technical Name field is still greyed out. Also tried right clicking and selecting Edit, but same problem.
Would removing all instances of where the figure is used in the query and other queries allow me to change it? Could it be a user rights issue?
As always, thanks for the help!

Hi,
After creating a RKF , you cannot change its technical name.
If the RKF has a lot of restrictions and creation of another similar RKF is a big process ,
you can create a copy of the same through transaction RSZC.
In RSZC , give the source and target cube name as the name of the multiprovider on which your query is built,
select restricted keyfigure ,click on execute , in the list which comes after execute find your KF 'ZRNPVORDINTFACTPPP_FY'
and click on transfer/copy option available.Change the technical name as you want and then click on execute. A similar keyfigure with the desired technical name will be created in query designer ,global keyfigures .
Replace the same with your Old keyfigure in report.

How to compare index names and columns from different user?

I am using below query to compare two indexes from 2 different users but even though index name and columns are same... result shows me they are different.. what I am doing wrong? Thanks
WITH t AS
        (SELECT COUNT (DISTINCT index_owner || index_name || indexed_cols)
                   cnt
           FROM ( SELECT index_owner,
                          index_name,
                          listagg (column_name, ',')
                             WITHIN GROUP (ORDER BY column_position)
                             indexed_cols
                     FROM dba_ind_columns
                    WHERE index_name='XPKTBL_A'
                 GROUP BY index_owner, index_name))
SELECT CASE
          WHEN cnt > 1 THEN 'Indexes are different'
          WHEN cnt = 0 THEN 'Indexes dont exist'
          WHEN cnt > 1 THEN 'Indexes are identical'
       END
          commnt
FROM t
Result:
Indexes are different
but Actually if you check below they are same After when I run this query:
SELECT index_owner,
         index_name,
         listagg (column_name, ',') WITHIN GROUP (ORDER BY column_position)
            indexed_cols
    FROM dba_ind_columns
   WHERE index_name='XPKTBL_A'
GROUP BY index_owner, index_name;
Result:
Index_owner
Index_name
Index_cols
USER1
XPKTBL_A
FIELD_A1
USER2
XPKTBL_A
FIELD_A1

Hi,
Erhan_toronto wrote:
I am using below query to compare two indexes from 2 different users but even though index name and columns are same... result shows me they are different.. what I am doing wrong? Thanks
WITH t AS
        (SELECT COUNT (DISTINCT index_owner || index_name || indexed_cols)
So index_owner is 'USER1' in one case, and 'USER2' in the other; right?
A string that starts with 'USER1' will be distinct from a string that starts with 'USER2', no matter what the rest of the string contains. Maybe you don't want to compare the owners, or maybe you meant to use some other column (such as table_name) instead of index_owner).
I hope this answers your question.
If not, post a little sample data (CREATE TABLE, CREATE INDEX and CONNECT statements), and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

Technical names of column shown after POWL_D01

Similar Messages

Maybe you are looking for