Technical names of infoobjects in infosets

Hi,
I have create an Infoset through several ODS and cubes. System automatically generates technical names starting with F, at design screen for each infoobject in ODS or cubes. But i want to see and use original tech. names of objects especialy on the BEX design screen. F names are confusing me.
Is that possible ?
best regards,
Yigit

Technical names are assigned sequentialy.
You can enter in Infosets definition and push the button of technical names (the most right one)
In BEX i think is not possible.

Similar Messages

  • How to identify the technical names in infoobjects inInfoset

    Hi,
    I want to design the query based ob infoset(SAP BW). Infoobjects shown in the infoset have different technical names.
    There are 4 infoobjects in query designer having same descriptions. How should I identify technical name of infoobjects and differentiate between them?
    Regards,
    Shital

    Hello Sheetal,
    Click on the Technical names  button in query designer, it will be in between context menu and table display.
    Regards,
    Pavan.

  • Virtual infoobjects: technical name in source and target systems

    Hello Everybody,
    actually I got a problem: I´ve created a virtual characteristic which is working fine on development system.
    However after transporting to target system the BADI implementation containing the virtual infoobject dumps:
    assign component 'Z____723' of structure cs_data to .
    Is there any other way to avoid using these technical names 'Z____723' and use e.g. 0customer instead?
    I would have expected, that the technical name for the virtual characteristic in my case 'Z____723' for 0customer will be the same in dev as in prod.
    Thank You!
    Goliad001

    In my case I need to copy a Production Client (say 900) to a Test Client on a test machine (say client 700), what I came to know was that this is basically a client copy, but since the size of data involved is to the tune of 500GB +, it is System Copy.
    Client Copy and System Copy are two different method to transfer the data and process are toatally different.
    >> Also if on the present test machine I am to keep the present client 700 and if the resources permit, create a new client (say 800) and copy client 900 to it, is it a System Copy.
    No. It will be client copy which is not possible as your Source/Target system are on different Support Pack level.
    Or if I copy the client 900 to the existing client 700, is this a System Refresh ???
    No. It will again a Client copy. You have confused between System Copy and Client Copy. I would suggest to to read first what is the difference between these two and the process to do that.
    Regards,
    Subhash

  • Technical Name of Existing InfoObject

    How can I change the technical name of an existing InfoObject? Thanks

    I think this is not possible...you have to create another one as copy (but this will not allow you to replace the old with the new one in all the objects in which these objects are contained as providers, query and so on...)
    Bye,
    ROberto

  • Multiple Infoobject with same technical name

    Hi All,
    I have a very basic question which confuses me a lot.
    I have installed a BI content info cube 0SD_C03(Sales overview) and it is installed in Info Area -  ERP Analytics -->sales and distribution analyses. I checked the dimensions of it and 0customer( master data attr) is linked as a dimension. I created a copy of 0SD_C03 and the new Infocube name is ZSD_C03_T. It also has the same 0customer master data attr as a dimension(obviously!).
    Now both the infocubes have different technical name(0SD_C03 and ZSD_C03_T) since they will be storing different sets of data(lets say). but the technical name of the master data (0CUSTOMER) is the same for both cubes.
    ques 1: Is it since its a master data and contains the same set of master data for both the cubes, it has the same technical name?
    If I search the Info provider section for "0CUSTOMER", i get two entries: One within my info area and another within another info area. And also i can keep doing (Right click Info area--> Insert Characteristic as Infoprovider) on every other info area and insert 0CUSTOMER in every other info area.
    ques 2: does all the 0CUSTOMER in different info areas, actually contain the same set of data?
    ques 3: if i search for 0CUSTOMER in InfoObjects section, i get 5 entries in different infoareas. How can there  be diffferent Infoobject with same technical name be present in different info areas?
    Sorry if i am too elaborate, I hope i have made my questions clear.

    Hi,
    ques 1: Is it since its a master data and contains the same set of master data for both the cubes, it has the same technical name?
    A. same 0CUSTMER you can use the different places it holds same data.
        source is the 0CUST_ATTR -> target is 0CUSTOMER.
    ques 2: does all the 0CUSTOMER in different info areas, actually contain the same set of data?
    A. it will contain the same set of data.
        it has the overwrite function.
    ques 3: if i search for 0CUSTOMER in InfoObjects section, i get 5 entries in different infoareas. How can there  be diffferent Infoobject with same technical name be present in different info areas?
    A. you triggered the 5 times for specif DTP means you will 5 entries for different info areas.
    finally i will say you use the 0CUSTOMER no of places where you required and no need to create the ZCUSTOMER.
    Thanks,
    Phani.

  • Changing the Technical name of the Infoset ????

    Hello,
    Is there any way from which i can change the technical name of the already created Infoset in BW 3.5 ver.
    Regards,
    Mayank

    Hi,
    Tcode : RSISET
    http://help.sap.com/saphelp_nw04/helpdata/en/62/a7663bac808b78e10000000a11402f/content.htm
    Regards
    Happy Tony
    Points == Thanks

  • What is infoobject technical name labor: mara-labor

    Hi all
    what is the infobject technical name of LABOR : MARA-LABOR
    LABOR found in the transfer rule but it is not enable. how i am enable in the transfer rule
    REGARDS
    SANGRAM

    check this out...
    query problem field is not avable in the cube
    assign points if useful ****
    Thanks,
    Raj

  • Infoobject in infoset but not displaying in query designer

    Hi,
    I have created a query on infoset(ods1 & ods2).
    a custum defined infoobject (fiscyr) is not displaying in query designer while it is present in infoset.
    pls give your inputs,for why this infoobject is not available in query designer.
    Thanks
    Radika

    Hi Radika,
    I cannot think of anything other than the solutions already mentioned in this thread (checking the IOBJ in infoset, running RSISET and activating it). I just had a foolish idea that you might not be looking for the right IOBJ. All the IOBJs from an infoset are not displayed with their original technical names in the query designer. They are disdplayed in the format: <infoset_technical_name>_FXXXXX where XXXXX is a number.
    Also try one more thing. Go to transaction RSISET and type in the technical name of the infoset there.
    Right below the box where you type the Infoset name is a check button. Check your Infoset there and then activate it from within the RSISET transaction (the activate button is right after the check button). With Infosets, sometimes just activating it from within RSA1 does not work but RSISET always seems to work.
    Do this and see if it helps.
    Thanks & regards,
    Nikhil

  • Display the technical name of the last level of the hierarchy

    Hello,
    I have a report with hierarchy. Each level of the hierarchy uses different infoObject. I want the report to display the technical name only for nodes from specific infoObject. For example if the infoObject uses 0cust_grp1 (for the first level), 0cust_grp2 (for the second level), 0cust_grp3 (for the third level) and 0customer (for the last level) and I want to show the technical name only for the 0customer infoObject. I know how to do it in WAD reports. Is there a way of doing it in the Query Designer?
    Please Advice,
    David

    David,
          Check the below possibilities.
    1. You can do that in a workbook.
    2. Create a copy of the same hierarchy and for the 0CUSTOMER object and nodes give tech names as text also.

  • Is It  POSSIBLE to change the Technical Name of Z-version Query

    Hi  Friends ,
    I was changed all quereis and cube from standard version to Z version.
    For queries, by using rszc , i was changed to Zversion,Now again is it
    possible to change the Technical Name of Zversion Query ?
    If possible , can you please tell me the process ?

    Hi Hameed,
    This may be the reason you are getting an error.
    The target InfoCube, the InfoCube for the query copies, must contain all the InfoObjects of the source InfoCube (InfoCube of the original queries).
    The another reasons may be the copying of queries within the same cube shouldn't be done by RSZC.
    It's better to approach the Bex Query designer.
    Hope you understood..
    Check the link below for more information:
    Re: How to copy query elements without Bex
    http://www.bi-expertonline.com/article.cfm?session=&id=2055
    Re: copy queries + variants + workbooks -- RSZC ?
    Regards,
    Ravi Kanth
    Edited by: Ravi kanth on Jun 10, 2009 10:03 AM

  • Rename Technical names

    Hello people,
    I would rename technical names of infosources, datasources...
    I see 2 ways :
    - rename in a table the technical name of this infoobjects
    - copy the infosource, with template the infosource to change.
    In the first one, i don't know if this table exists.
    In the second way, i create a new infosource with template the old one. i try to assign as datasource the old datasource (not connected to the old infosource, because <i>a datasource can be assigned to a only one infosource</i>). But i don't success. I don't see this datasource in order to assign it. And it seems i can't create a datasource manually with as template the old datasource.
    Can you help me to resolve this problem??
    Thank you  !!!
    Vince.

    You will have to create the transfer rules again - when you select a template - only the communication structure will get copied ..
    Also even if you do fins out the table where it is stored and get to change the same - the background values are GUIDS or 32 character strings and that would still not change and you would have all sorts of problems transporting the same.
    You would have to re create the transfer rules..
    Arun
    Assign points if useful

  • How do we make the field's technical name appear in the selection screen

    Hi everyone,
    When we go into the manage of a target for diplaying the content of the object say active data table of ODS, I can only see the technical name of custom objects( infoobjects) like /bic/zcust but the technical name of the business content Infoobject ( like /bi0/material) is not seen instead I only see the description, How can I see the Technical name in the Selection screen of the data browser
    Thank you in advance

    Hi BR,
    I have already tried that. but I cant see the tech name for the Content Infoobject there. And I have also tried User specific settings from the settings Menu.
    If any more options available. PLz tell me
    Thank you

  • Query technical name

    Hi
    I am generating a query on the statistics multicube/cube for displaying the top 25 queries which are taking long time. But i want the technical name of the query in rows. which infoobject should be used which could provide the technical name of the query .
    plz guide
    regards

    Hi,
    have you tried 0TCTSTATOBJ infoobject?
    Let me know which Cube you are using for this (is it 0TCT_C02)?
    Hope it helps...
    Regards,
    Ashish

  • To change the technical Name

    Hi Gurus,
    Is it possible to change the technical name once activated?
    How to change the Technical name of customize characteristics of infoobject?
    Thanks & Regards,
    San

    Hi,
    You cannot change the techincal name ever...its not possible and not even basis can do that.
    I am not sure but try to open the system with the basis help and delete the entries from all the infoobject related SAP standarad tables...may be this can help.
    Thanks

  • Multiprovider-links with infoobjects and infosets

    Hi Gurus,
    Advance thanks to all.
    Can any of tell me how can seen the multiprovider is link up with the infoobject and infosets in seen  t.code or etc,the link  with the infoobject etc will happen in backend is it correct ?
    waiting for your points.
    regards
    sanjeev kumar

    Hi,
    at RSA1 --> info provider,,find and click your multiprovider on next screen there are tabs(infoset/info cubes/info objects/dso), check each tab. thru tshat you will know the objects which are connected to your multi provider.
    On each tab if any object name maintained and selected then that is connected to your multiprovider.
    Thanks

Maybe you are looking for