Technical Names

Hi,
Could any one please let me know what are the technical names of the below objects in R/3 and the table name(s)where they can be found.
1>Main Customer
2>Business unit from Profit Center.
Thank You.
Regards.
Vaishu.

Hello VaisHu,
How r u ?
Go To SE11 and in Tables type in DD03T and then select Table Contents (CTRL + SHIFT + F10). Then give the DDTEXT you want to take and see the FIELD NAME and TABLE NAME.
Also, I have not seen these 2 Descriptions exactly in R/3.
Best Regards....
Sankar Kumar
+91 98403 47141

Similar Messages

Field description in chart legend instead of technical name (BW query)?

I am building a report from a BW query. The report has a grouping field and a bar chart in the group footer. When I execute the report the legend shows the technical name of the key figures even though I checked the "Show description" field in the "options".
I can change the labels in "preview" mode (provided I can guess the real names), but just like in the field explorer I would prefer to always have the text instead of the nonsense technical name.
Is this possible?

hello all,
you can use a 2 chart workaround for this.
1) the first chart is the Group chart you already have...just disable the legend
2) now create an Advanced chart using the description field as the On Change Of
3) set the Order of chart to correspond with the technical field that the group is based on
4) preview the chart and right click on the x axis area and format the axis so nothing is showing
5) do the same for the y axis
6) keep right clicking on all of the chart objects and changing them to transparent
sounds annoying, is annoying, but it works.
cheers,
jamie

Find the technical name of a report in Crystal 2008(XI R/3)

Hi,
I know the report technical name(system genetared) is availble at properties tab in CMC in crystal XI R/2, but I am unable to find the same in XI R/3. Also let me know how to create a open document or generate URL for XI R/3 reports.
Thank you,
Regards,
Preetham

Hello Preetham,
I recommend to post the first question to the [BusinessObjects Enterprise Administration|BI Platform; forum.
The URL documenttion for opendocument R3 is [here|http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_url_reporting_opendocument_en.pdf]
Best regards,
Falk

Display technical name of a query in a web template ?

Hi,
I try to display in a basic web template the technical name of my query with a web item. In this order, I have tried to use the web item 'Text Elements' but how could I configure the latter in order to have only the technical name ?
I have selected 'Display General Text Elements' in properties of the web item.
In the property 'List of Text Elements', what is the couple of values that I have to configure ?
Many thanks,
CG.

Hi,
What you need to do is, keep a TEXT Web Item in the template.
Then do not tick any of the options under Specific. Instead, go to List of Text Elements. In the first column, select General Text Symbol. In the next column type REPTNAME.
This will give the technical name of the query in the output.
Common text elements:
u2212 technical name of the query (REPTNAME)
u2212 description of the query (REPTXTLG)
u2212 InfoProvider (INFOCUBE)
u2212 key date for the query (SRDATE)
u2212 accuracy of the data (date and time) (ROLLUPTIME)
u2212 the person who wrote the query (AUTHOR)
u2212 the last time the query was changed (date and time)
(MODTIME)
u2212 the last person to make changes to the query (MODUSER)
u2212 current user (SYUSER)
u2212 the last time the query was refreshed (date and time)
(SYUZEIT)
Try this. Hope it helps.

While saving Bex query with Technical name, it says Query already existing

Hi,
I am facing a problem. While saving a query withy its technical name (for example ZQYZMPR_01), it says that query is already existing. But when I search for the query in all tabs like Favourites, Roles, Infoprovider It is not found.
I also checked a view V_REP_JOIN. In this view I find Query (ZQYZMPR_01) in MODIFIED version.
I want to use my previous query instead of creating new one.
Suggest, how can I retrieve my previous query that I am unable to search for.

Saurabh
Searching with descriptions may lead to confusion as there may be similar descriptions to a query but just one technical name. Check the query 'where used list' you may find answers.
Can you check the query in RSZCOMPDIR ? If the query exist here, it must be there in the system. Do the search with exact technical name ZQYZMPR_01 or ZQYZMPR*, you should be able to find. Do not search in specific areas like roles etc..search directly by inputting the tech. name.
Ferdinando - you can delete the query in RSZDELETE transaction. While doing so, it will prompt for removal from all areas like roles, workbooks etc. Say 'yes' and delete, you will be able to assign the technical name to another query.
Ramesh

Error while saving Views in Portal - Technical name not valid.

Hi,
When saving Views in Portal, I'm getting the message The Technical name of object QVIW is not valid. I've searched the forums but couldn't find any solution to this issue. We are on SP 16. Any help would be appreciated.
Thanks & Regards,
Hari

Dear Harikrishna,
while saving iviews in portal..
it will prompt for some mandetory columns is it.. one is for description..
and the iview name like iv<name of the template>.. this should be without space..
and in the next page u should give technical name of the template as 'template=<name of the template'
in this you should not give any space..finish and save the ivew..
hope this would help you.

In the info cube insted of description need to display technical name

Hi,
I am displaying my info cube contents.But in the field name insted of description i need tehnical name of the filed to dispaly.can you plz anybody suggest me the solution.
thanks
Raj

Hi Raj,
Use T code : LISTCUBE
you get 2 text boxes, Object type : CUBE
Data Target : cube name
Check the option - Technical names. F8
You get all the technical names in the place of descriptions,
hope this is fine
Regards
sreekanth

In the filter the value of text variable is not shown, only technical name.

Hi All,
We have some odd behavior of text variables in the filter screen of key-figures.
After entering values in the variable screen, the report is executed.
Within the report all text variables are filled, with the values entered in the variable screen.
I say all, because we use both sap standard variables &0T_FPER& as customer specific &ZFSCYR&.
When i want to change the key figures showned, i press the filter icon for key-figures (BW 3.5)
In the list shown: existing filtervalues, the textvariables of SAP standard are filled with the value entered in the variable screen. However the customer specific is shown with the technical name (&ZFSCYR&) and not the value.
Has anyone experience with this behavior or even better a solution to prevent this?
As allways, each usefull answer points assigned!
Regards,
René

Hi Rene,
If ur custom text variable is not getting populated then you need to check out the code that u have written in there in CMOD for this and ofcourse if ur using this text variable after report execution then it will definately be in i_step 2.
So best way is to debug your code and check that using code RSRT.
Thanks
Dipika

How can i find technical name of varaibles in query 0T_FYEAR

Hi all,
I am trying to transport my bex objects (query and structures and stuff) from dev to QA.
I had one previous transport from dev to qa and now I have two varaibles 0T_FYEAR and 0P_FYEAR.
And these two varaibles have the earlier reuqest number so I want to delete then from that request and then add to the new request I am trying to create.
But in the old request I dont see these two elements how can i check the technical names for that. I see two different entries in that request which are something like
R3TRELEM2477EPQ40PB73OI4A73SI20IH rest all are starting with 43.....
Can some one help out.
Thanks in advance

Hi Raj,
You can try looking up those IDs in SE16 > V_ELTDIR_TXT to recognise which is which.
Hope this helps...

Technical names in Business Role selection screen

Hello,
When I log on to the WebUI I get the selection screen for the Business Roles (correct because I'm assigned to multiple).
But in the selection screen the Technical Names of the Business Role is hown too and I don't want to show these to the users.
So does anybody know how we can disable showing the technical names in the business role selection screen?
Can it be done in BSP crm_ui_start > Page Fragments > selectBusinessRole.htm Selection of Business Role? If so, what do i have to change?
Thnx!
Regards,
Joost

Hi Joost,
This technical information is the tooltip that is comming from the following line.
crm_ui_start > Page Fragments > selectBusinessRole.htm
at line no 29
tooltip="<%= profile_detail %>"
If you can remove this line then technical information, that comes up when you do mouse over the role description, wouldn't come.
Regards
Ajay

Queries inactive in Production Technical name is not coming After Transport

Hi Folks,
i transported queries with role into production .
There queries are coming without their technical name means b'coze its related data-target was not active but now its active even then queries are not coming with their technical name.
So can we do any manual activation in production or should i go for re-import the same req again into production.
Plz Suggest me

Hi Rajan,
You can do manual activation in production and you can change the technical names of your queries in production.
Thanks and Kind Regards,
Lakshman Kumar Ghattamaneni

How to find the link between strcture and query technical name

Hi Guru's
How to find the link between Strcture in the query and query technical name. In other way where used list of the structure used in queries?
I know we have table called RSZELTDIR which have the values of strcuture name. from here i do not find any link to query technical name.
Please can anyone help me?
Regards,
Sirisha

Hi ,
For structure and query relationship, the structure has to be a reusable structure( a global one). Then you can right click in on the structure name (in BEX query designer) and select the where used list. You will find all the query names where it is being used.
U can also check out tables RSRREPDIR and RSZCOMPDIR for other query properties.
Thanks,
Amit

Inputting technical name for varaints in portal makes it viewable to all

Hello all, we are BI 7.0 using Portal for reporting
This is the issue I am facing, when an user is trying to save a varaint for any particular query it asks for description and technical name. Now if the user only enters description and not tech name still the system accepts it and it works fine. If user inputs both the fields still it works fine. But now the difference is that if the user has entered technical name than that varaint can be viewed by all the users kind off like global variant for everyone; and if the user only inputs description than only the user that created the varaint can see it.
So i just want to take away the technical name box from that screen; where/which template do I need to modify? I am using 0ANALYSIS_PATTERN for reporting.
Is there any other work around for this or information that i am missing and i am seeing such behavior can someone explain.
Thanks in advance

Hi guys,
Thanks for your answers first of all.
I don't want to store the technical name of the openhub in the logical file name....i want this to be determined dynamically, depending on the openhub that is used with this logical file name.
I was wondering were i can fetch the openhub technical name during the execution of the DTP on the openhub / when also the function module FILE_GET_NAME is being ran.
Let me know!
Thanks in advance!
Regards,
Freek

Function module to create query view from technical name of the query ?

Hi Experts,
I am trying to create webservice definition using function module.
In this code, I am calling function module 'RSCRMBW_REPORT' which requires query view name ( we can see this in RSCRM_BAPI) as a value for parameter i_reportuid.
For the time being I am hardcoding the value but I need to use a function module which will convert techincal name of query into query view.
Can anyone have any idea about the above requirement? Or is there any other way to solve the problem?
Thanks in advance
Shamkant
Edited by: SHAMKANT SONAWANE on Apr 7, 2009 5:38 AM

Hi,
You can use FMs CONVERSION_EXIT_GENID_INPUT and CONVERSION_EXIT_GENID_OUTPUT to get query view.
First call FM CONVERSION_EXIT_GENID_INPUT with parameter input as query technical name then it will return Output in the form of GENID .
Pass this GENID as input parameter to FM CONVERSION_EXIT_GENID_OUTPUT to get query view as output.
Eg :
Test for function group      RRI5
Function module              CONVERSION_EXIT_GENID_INPUT
Uppercase/Lowercase
Runtime:        6,652 Microseconds
Import parameters               Value
INPUT                           Y0IC_C03_Q0018_2
Export parameters               Value
OUTPUT                          4D1I916ID7TWS1CK27154WYZ8
Test for function group      RRI5
Function module              CONVERSION_EXIT_GENID_OUTPUT
Uppercase/Lowercase
Runtime:        2,818 Microseconds
Import parameters               Value
INPUT                           4D1I916ID7TWS1CK27154WYZ8
Export parameters               Value
OUTPUT                          0IC_C03/Y0IC_C03_Q0018_2
0IC_C03/Y0IC_C03_Q0018_2 is expected query view.
Hope it helps...
regards,
Raju

Technical Names appearing in the report output

Hi Experts,
I am in support and got a strange case. When one of the users runs the report in web, he sees technical names of the fields instead of their description. On the contrary, when I run the report, everything comes fine. I don't know where the problem could lie. If you can help me, that would be really great.

Hi Shobhit,
Please check that if the objects are Translated to the language User is using.
When you try to run the report, you might be using English as default language and everything is there in English only.And when user tries to run the report, most possibly use's login Language must be different.
You can crosscheck this by using the users language while logging in to Analyser,
If this is the case (Translation) even you will see the Technical names.
For Translation Help :
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30a65c3a-2ad5-2910-a4be-88412392cfe5]
Hope this helps.
Best Regards,
Pratap Sone

Technical name of a condition

Hi Experts
How do I find the technical name of a condition in the Query Designer?
I am trying to create a button that turns toggles between on/off condition in the WAD. When I use the wizard and the system tries to show me all the possible conditions in the query, I get an error message: RSBOLAP 14, Transformer exception while transforming BEx Web templates. The system also gives the message: Object reference not set to an instance of an object. I think this error is corrected with the note 916090.
Until then I would like to input the value manually, but I can not find the technical name of the condition.
We use NW04s SP 12, front end BEx SP13.
Kind regards
Erik

Hi Erik,
In the Query Designer, open the query and goto the Conditions button.
The dialog that comes up, shows all the conditions created for that query. Right click on the condition for which you want to find out the technical name.
Hope this helps.
regards,
S R
PS: Assign points if helpful.

Technical Names

Similar Messages

Maybe you are looking for