Technical question regarding xml:lang...

Greetings,
I have a bit of a technical question regarding language alternative (Lang Alt), are these valid statements if there is no alternatives (using dc:title as an example):
1)
This is a test title
2)
This is a test title
3)
This is a test title
Are these values valid, or is there an obligration to put them in an rdf:Alt ?? In my head 1 and 2 are valid, but no 3, am I right?
Thanks!
Carl Eric Codère

Thanks for your quick response!!
Can you please give little more detailed explanation on what exactly is the entity. Where does that entity be defined and what exactly does an entity represent. Please let me know.
-Satya

Similar Messages

I need help with a question regarding XML

I have an exam tomorrow, and I was checking exams from previous years. There is a multiple choice question regarding XML, and I don't know all the correct answers (some are pretty obvious).
It's plattform independent
It allows UML representation
It's a Text Only format
It's faster to process than native binary formats
It's a data exchange standard
It allows specification of the meaning of the data in the document
It comes from HTML
.NET and J2EE provide tools to handle it

In the beginning there was SGML... the newest HTML
standard is an XML defined language (although most
sites and pages are still not XML compliant). Soyou
can think of HTML as a subset of XML but XML isnot
by any means a subset of HTML.But wasn't XML's format based on the original HTML?
That is, XML is a generalization of the original
HTML. So, the "true"/"false" determination depends
on how you define "It comes from HTML" (I thought it
was derived from HTML, which would make the
statement "true" [IMHO], but I could be wrong).No XML is not derived from HTML. Markup languages existed well before HTML. HTML popularized them to a large extent but it was not the first by any means.
See http://en.wikipedia.org/wiki/Generalized_Markup_Language
Also Wiki states in it's XML article that XML is a subset of SGML (which through that article) is a descendent of GML
The language heirarchy from SGML is as follows
SGML ---- HTML (old spec and deprecated)
       |
       |
       ----- XML ----- XHTML (current XML spec)edit: the tree got screwed up. XML descends from SGML directly.
Message was edited by:
cotton.m

Technical Question regarding TCP Ports

Morning All
The Set up - 1xXP PC running BTNP and 1xWin7 Laptop running MSE
1xBTHHV2.0B
1xBTVision box (currently not connected)
I have posted elsewhere on here about strange results regarding attempts (via UDP ports) to connect to my PC and have been trying to stop this or even look into who, what and why. At this present time BTNP has been manually configured to report everything and I'm getting some interesting attempts. Anyway googling this, that and the other has sent me in the direction of TCP Ports.
Upon opening "netstat" via a command prompt on the PC it shows that 4 TCP Ports are currently "established" and 1 is showing "close_wait". All these refer to the localhost:**** which I guess is okay?
However, opening "netstat" on the Laptop shows 8 TCP Ports are currently "TIME_WAIT" (in the state section) and 1 refering to which IP the laptop is assigned with and the www IP address. It's the 8 I'm slightly concerned about. They refer to what I believe is the BT Vision server IP address (127.0.0.1). The same address is found on the BTV box.
Apparently, to block TCP connections the user needs to manually configure the router firewall which AFAIK can't be done on the BTHH2.0B.
So here's the Q's
1) Is it normal to have a computer TCP connection with what appears to be BT Vision?
2) If not how do I block/close the TCP ports without using a router firewall that appear to be BT Vision?
3) Why would the BTV IP address be dispalyed if the box has not been connected for some time?
None technical replies would be good
-+-No longer a forum member-+-

@ Roger.
Wow what a read!
Am I correct to assume that UDP transmissions are safe as they don't go anywhere as the firewall stops them? I'm still intrigued as to why various transmissions are attempted (ie. microconnect, BTVision, Binary Trojan maker etc etc etc).
Currently re reading yet again and will post regarding TCP...........
.............TCP has to make a connection? A packet is sent from A to B and back to A. It is then that data can be exchanged. A and B's serial numbers can also be exchanged. Then when they have a full 'duplex' connection, A and B can send data to the each other anytime they want. And all A has to do is just give the operating system some stuff to send?
That worries me or am I reading into this the wrong way?
-+-No longer a forum member-+-

Technical Question regarding ABAP

Hi Friends,
The question that i am shooting up , I beleive, might have come across in your projects also..
Simple Scenario : I should generate a report about Invoices that are generated today.
But the business is like that on any given day... there are about
200,000 invoice documents generated.
So my issue here are.
1. Optimum way to declare an internal table: MUST be able to accomodate >200,000 records.
2. Best way to fetch into internal tables.
Awaitng your replies..
Regards,
Vinay

Hi, I normally use HASHED table for processing large amount of data.
You may want to check SAP Help for additional information.
http://help.sap.com/saphelp_47x200/helpdata/en/fc/eb35de358411d1829f0000e829fbfe/frameset.htm

Very technical question regarding HDMI ARC

Hi all, I'm planning out a HT purchase, and I plan on setting it up like this: Devices (Cable/PS4) -> TV (via HDMI)TV -> 2.1 ch Soundbar (via...) For the TV to Soundbar connection, I could just use an Optical connection, get 2.1ch lossless via Linear PCM and call it a day and be happy. But the HDMI ARC connection has me intreugied, and where my questions come in. 1.) Can I use HDMI ARC even if I NEVER have the TV's input set to the soundbar source (ie. making it a passive upstream audio only and essentially replacing the role of a Toslink Optical connection). 2.) If this even can be done, would I still get the benefit of Controlling the soundbar through my TV remote? (via Control through HDMI 3.) Lastly, would I still get the same S/PDIF, 2.1ch lossless audio LPCM this way? If it matters, the planned purchases are:TV: Sony X850CSoundbar: Sony HT-CT780 I've asked on some technical A/V forums before but no good response to this yet - maybe because my setup plan is an odd one, usually HDMI ARC is there to prevent the need for another cable (like Optical) but if I can get control from HDMI I think its worth investigating. Thanks!

I know it's a lot later but I wanted to give credit where credit is due. I wound up toying with the system myself and it works fine, and what Dimestore said is true.
The ARC protocol is passive in the sense that it's constantly feeding back despite the input of the TV
And honestly, the communication between the Sony devices is great. In fact, the TV itself can read the different inputs through to the soundbar and display them as separate inputs on the TV. It's pretty cool.
Thank you both for your responses!

Technical question regarding Video Preview options in Seq Settings

I am trying to wrap my head around some of the unique differences between FCP7 and PrP 5.5. What is the function of the Video Preview choices in the Sequence Setting menu? It seems standardized to I Frame Only MPEG with other options depending on what your source footage is. Why would I use this setting as opposed to 1080 (for an AJA sequence made from Prores footage) or P2 (for an Adobe seq built from the same Prores footage) or Red which gives you no options then the one I just mentioned?
In FCP when things were rendered they were used when I would export the sequence. Is PrP 5.5 the same? If I am previewing a 1080 sequence in I Frame Only MPEG, does that mean on output the whole entire sequence and effects need rendering? What is the best work flow when using Adobe or AJA sequences in regard to this Video Preview setting? It is so different from what I am used to I want to make informed choices.

Maximum Bit Depth is only suitable when ingesting 4:2:2 material and exporting with AJA or BM
Oh, man... not again. This is not true, at all. Maximum Bit Depth has nothing to do with 4:2:2 AJA or BlackMagic. And Maximum Bit Depth is not just for use with 10-bit or greater source footage. It can be used with 8-bit material--DV, H.264, MPEG2, anything--to great benefit.
(The following is copied and pasted since I've written it so many times...)
What Maximum Bit Depth (either in the Sequence Settings or in the Export Settings) does is enable Premiere Pro to render and composite in 32-bit floating point color. It has nothing (or at least, little) to do with the source footage, but controls how effects and transformations that shift pixels around are rendered. Any effect in the Effects panel that has a 32-bit badge on it will benefit from Maximum Bit Depth--the expense is greater memory requirements and processing time, but the payoff is a higher degree of color fidelity and precision in the rendered image. Gaussian Blur, for example, is a 32-bit effect that will show a great difference between when it is rendered with MBD on versus when it is off--even if you're rendering/exporting to an 8-bit format, like DV.
From Karl Soule's article on this topic, The Video Road – Understanding Color Processing: 8-bit, 10-bit, 32-bit, and more:
A DV file with a blur and a color corrector exported to DV without the max bit depth flag. We will import the 8-bit DV file, apply the blur to get an 8-bit frame, apply the color corrector to the 8-bit frame to get another 8-bit frame, then write DV at 8-bit.
A DV file with a blur and a color corrector exported to DV with the max bit depth flag. We will import the 8-bit DV file, apply the blur to get an 32-bit frame, apply the color corrector to the 32-bit frame to get another 32-bit frame, then write DV at 8-bit. The color corrector working on the 32-bit blurred frame will be higher quality then the previous example.
A DV file with a blur and a color corrector exported to DPX with the max bit depth flag. We will import the 8-bit DV file, apply the blur to get an 32-bit frame, apply the color corrector to the 32-bit frame to get another 32-bit frame, then write DPX at 10-bit. This will be still higher quality because the final output format supports greater precision.
A DPX file with a blur and a color corrector exported to DPX without the max bit depth flag. We will clamp 10-bit DPX file to 8-bits, apply the blur to get an 8-bit frame, apply the color corrector to the 8-bit frame to get another 8-bit frame, then write 10-bit DPX from 8-bit data.
A DPX file with a blur and a color corrector exported to DPX with the max bit depth flag. We will import the 10-bit DPX file, apply the blur to get an 32-bit frame, apply the color corrector to the 32-bit frame to get another 32-bit frame, then write DPX at 10-bit. This will retain full precision through the whole pipeline.
A title with a gradient and a blur on a 8-bit monitor. This will display in 8-bit, may show banding.
A title with a gradient and a blur on a 10-bit monitor (with hardware acceleration enabled.) This will render the blur in 32-bit, then display at 10-bit. The gradient should be smooth.
What Maximum Bit Depth does is allow Premiere Pro's rendering engine to have more room to run, with a higher degree of precision. It's important to remember that rendering internally is different than exporting--and even when you're "rendering" previews, you're actually exporting, because you're creating composited video files of one sort or another. That's why there is a Maximum Bit Depth checkbox in the Sequence Settings--that affects preview files, not exports. When you're using hardware MPE, you're always operating in MBD--or more specifically, you're rendering in 32-bit linear color. Generally, this is "better," though I've lamented about the negative effects of linear color processing, e.g. annoying opacity differences on dissolves, shaggy alpha channels, etc.
The bottom line is that Maximum Bit Depth allows Premiere Pro to generate better (subjective), more technically accurate (objective) output, regardless of the input and output format.

Technical question regarding network settings

There does not seem to be much "answered questions" on this forum -- more like a gripe forum - but I'll give it a shot:
I occassionally do file transfers between my mac and pc, using a connected ethernet cable -- and have had no problems with this until after I did a successful transfer today. Then I was not able to do another. I looked at my Local Area Connection settings - Details - and noticed that the Autoconfiguration IPv4 address that was once there, was no longer there. This may explain why the mac was not able to 'find' the pc -- but I'm not sure. Looking at other sites on the web, it appears there should not only be a Autoconfiguration IPv4 address (which was there before, because I took the IP address 169.254.xxx.xx address from there before) - but there also should be an Autoconfiguration IPv4 'enabled' [yes] setting there also, which also does not appear in my settings. I suspect I must have inadvertantly changed a setting when I did the last transfer, but do not know what or how to correct it. Thank you!

Some questions if you do not mind:
#1 What kind of cable is it?
#2 Is this cable connected directly to the two computers or do you have a cable for those two computers connected to something else?
#3 If you have a cable for those two computers connected to something else, what is the band and model of that something else? For example I have my computers connected to a Linksys E4200v1
#4 Regardless if this cable connected directly to the two computers or do you have a cable for those two computers connected to something else, do you know how to setup a Static IP on your computer?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Hi I have a technical question regarding my CD drive

my guitar pick was on my desk and it managed to get wedged in my CD drive.. I can't see it or get it out however discs seem to go in and out fine..is there anything I should do?
I have a Macbook from December 2009

Hi thanks for answering.
how would you make the gateway and the certificate comply with this.
my gateway certificate is connectgw.companyname.com IP xxx.xxx.xxx.xxx
my web server certificate is connect.companyname.com IP xxx.xxx.xxx.xxx
the ConnectionBroker only allows one Gateway?

Technical question regarding ptcor code

Hello,
I have the following problem with my custom PTCOR application: (WTimeCor is the actual application name)
When I submit all time events, do a EXECUTE_DELEGATE in PTCOR_UIA_FORM_DELEGATE and then execute the method restartService(); of VCConfirmation, everything works fine but the overview falls back to the current week.
When I try saving anything afterwards (deleting, modifying, creating) without using restartService() before, I get the following BAPI Error:
No customizing for status type COR, status POSTED, transition event SEND
any property I need to reset? like FORM_DIRTY or setting a different request-id?
thank you very much

thanks for you answer. I sense it may be some kind of unfinished workflow.
I tried to skip review steps inside the application and save the modification all at once, which means:
PTCOR_UIA_FORM_PREPARE with IM_COMMAND "CREATE"
FORM_ACCEPT with IM_COMMAND "ACCEPT_SEND" (copy request-id and structure content from FORM_PREPARE output)
FORM_DELEGATE with IM_COMMAND "NEXT"
and
FORM_DELEGATE with IM_COMMAND "EXECUTE_DELEGATE"
all triggered from WD Java. I took these FM from the original PTCOR application, I don't know if there's a FM that saves a time event without any workflow steps.
Now what restartService() does is, it navigates via the FPM back to the application so the application is created anew, PTCOR customizing is being read and WEEKLY_CALENDAR is read as well (if I understood that correctly). It seems to initialize a new workflow so I am able to save a new time event to via the above method.
Best Regards

A technical question regarding NOKIA 301 Dual SIM

Several days ago I bought new NOKIA 301 Dual SIM.
It is equipped with charger NOKIA AC-20E, input AC 100 - 240 V/120 mA, output DC 5V/750 mA.
Also, I have several other (old or non-Nokia) chargers:
1) NOKIA AC-10E, input AC 100 - 240 V/160 mA, output DC 5V/1200 mA;
2) NOKIA AC-3E, input AC 100 - 240 V/60 mA, output DC 5V/350 mA (for this charger, I have proper adaptor for NOKIA 301 Dual SIM);
3) USB charger L-STAR , input AC 100 - 240 V, output DC 5V/1000 mA+/-5%
May I use these above listed (old or non-Nokia) chargers for charging my new NOKIA 301 Dual SIM (or which of them are compatible with NOKIA 301 Dual SIM)? Thank you.
Solved!
Go to Solution.

Choose the one with output 5V, 1200mA or the one which came for your phone, output 5V, 750mA.
More the output mA, the faster battery will charge. I don't recommend non Nokia ones.
Hope this helps.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

Another technical question regarding NOKIA 301 Dua...

Sunday I was in the mountain where the network coverage was very sparse or missing. Of course, my phone lost the operator signal. But when I arrived again in the town (where the operators signal is normal), the phone could not manage to find the operator signal (SIM 1) again. After restarting the phone by switching off and on, the phone registered both operators signals (SIM 1 and SIM 2 ) normally. Do you think that this situation is normal? For example, my old phones (1680, 1650 and 6303) always manage to find the operator signal when, after disappearance, the network coverage appeared again, without need to restart them. Thank you.
Solved!
Go to Solution.

Well.. I'd say its normal and maybe its a better thing to do. When under no network coverage for a prolonged period, my Nokia 311 does not register to network even when I'm finally in the network coverage area.
The point is that the phone gives up and stops trying hard to find the network coverage when it is not able to receive any network for a prolonged period. This is actually good as the phone will firstly stop wasting its battery just to keep the antennas highly sensitive and look for network.
That said, i think it still keeps trying to find the coverage, but the attempts are done not in immediate succession. I'm able to say this as sometimes my phone catches up the network again by the time I really reach home after entering the coverage area.
Whatever it is, I'm sure a restart won't hurt much especially if it helps in saving battery and also to save you from the high radiations the antennae emits while looking for the network in no coverage areas.

Some Technical Questions Concerning iPhoto 09.

I would like to use iPhoto to arrange, organize, tag, and otherwise un-mangle my family photos taken within the last ten years. However, I have never so much as launched an instance of iPhoto! I have a couple of technical questions that I'm hoping can be answered by a forum guru.
1.) I love the idea of iPhoto tagging and organizing my photos via places, faces, events etc. How does iPhoto store the metadata which allows it to organize as such? Is this data added to the photo files as additional EXIF data? Or is there an iPhoto database file/files which needs to be maintained?
2.) When "importing" photo files into iPhoto, I'm assuming that additional thumbnail files are created and stored. Does it store additional "full" versions of the photo files by default (as iTunes will do with MP3s if you are not careful?) And when you start creating smart albums et al, I'm sure something similar to iTunes Library files (.ITL, .XML etc) are also created. What are the important files and directories created in the process?
Perhaps these questions can be answered appropriately by addressing my third question...
3.) Can someone point me to a whitepaper, article, webpage or discussion of iPhoto which goes beyond the available Apple.com tutorial? I know there must be a book available, but I really don't have the time to dedicate to a full book on the subject. I'm extremely lazy and still haven't finished the copy of Ulysses I purchased ten years ago. Just need some quick and dirty explanations...
~( ):>
Message was edited by: liquidmice

IF you're not too lazy to read the replies:
1.) I love the idea of iPhoto tagging and organizing my photos via places, faces, events etc. How does iPhoto store the metadata which allows it to organize as such? Is this data added to the photo files as additional EXIF data? Or is there an iPhoto database file/files which needs to be maintained?
This metadata is stored in the iPhoto database. It can be written to the files on export. Prior to Export there's no need to. I have no idea what you mean by "iPhoto database file/files which needs to be maintained?"
2.) When "importing" photo files into iPhoto, I'm assuming that additional thumbnail files are created and stored.
Correct. They are what you see in the iPhoto Window in Organising mode.
Does it store additional "full" versions of the photo files by default
Yes.
And when you start creating smart albums et al, I'm sure something similar to iTunes Library files (.ITL, .XML etc) are also created.
No there aren't. Again, this is all stored in the iPhoto Database.
What are the important files and directories created in the process?
There's only one you need back up. It's the iPhoto Library in your Pictures Folder.
At a guess this question:
Does it store additional "full" versions of the photo files by default
suggests you don't want this to happen.
You can run iPhoto in Referenced Mode where this won't happen. I strongly urge you not to, expecially as you haven't a clue about iPhoto and are very lazy.
*How to do it:*
Simply go to iPhoto Menu -> Preferences -> Advanced and uncheck 'Copy Files to the iPhoto Library on Import'.
*What Happens:*
Now iPhoto will not copy the files, but rather simply reference them on your HD. To do this it will create an alias in the Originals Folder that points to your file. It will still create a thumbnail and, if you modify the pics, a Modified version within the iPhoto Library Folder.
*Some things to consider:*
1. Importing and deleting pics are more complex procedures. You have to to put the files where they will be stored before importing them. When you delete them you'll need to remove the files from the HD yourself.
2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
3. Most importantly, migrating to a new disk or computer can be much more complex.
4. Because iPhoto has no tools for managing Referenced Files, if, for some reason, the path to the photos changes then you could find yourself resolving aliases for +each photo in the Library+ one by one.
My own opinion:
I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organiser
If disk space is an issue, you can run an entire iPhoto Library from an external disk:
1. Quit iPhoto
2. Copy the iPhoto Library as an entity from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
If you're concerned about accessing the files, There are many, many ways to access your files in iPhoto:
*For Users of 10.5 and later*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and later* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
For users of 10.6 and later:
You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and later:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Note that iPhoto sends a copy+ of the file to Photoshop, so when you save be sure to use the Save command, not Save As... If you use Save As then you're creating a new file and iPhoto has no way of knowing about this new file. iPhoto is preserving your original anyway.
Regards
TD

Questions regarding creation of vendor in different purchase organisation

Hi abap gurus .
i have few questions regarding data transfers .
1) while creating vendor , vendor is specific to company code and vendor can be present in different purchasing organisations within the same company code if the purchasing organisation is present at plant level .my client has vendor in different purchasing org. how the handle the above situatuion .
2) i had few error records while uploading MM01 , how to download error records , i was using lsmw with predefined programmes .
3) For few applications there are no predefined programmes , no i will have to chose either predefined BAPI or IDOCS . which is better to go with . i found that BAPI and IDOCS have same predefined structures , so what is the difference between both of them .

Hi,
1. Create a BDC program with Pur orgn as a Parameter on the selection screen
so run the same BDC program for different Put organisations so that the vendors
are created in different Pur orgns.
2. Check the Action Log in LSMW and see
3.see the doc
BAPI - BAPIs (Business Application Programming Interfaces) are the standard SAP interfaces. They play an important role in the technical integration and in the exchange of business data between SAP components, and between SAP and non-SAP components. BAPIs enable you to integrate these components and are therefore an important part of developing integration scenarios where multiple components are connected to each other, either on a local network or on the Internet.
BAPIs allow integration at the business level, not the technical level. This provides for greater stability of the linkage and independence from the underlying communication technology.
LSMW- No ABAP effort are required for the SAP data migration. However, effort are required to map the data into the structure according to the pre-determined format as specified by the pre-written ABAP upload program of the LSMW.
The Legacy System Migration Workbench (LSMW) is a tool recommended by SAP that you can use to transfer data once only or periodically from legacy systems into an R/3 System.
More and more medium-sized firms are implementing SAP solutions, and many of them have their legacy data in desktop programs. In this case, the data is exported in a format that can be read by PC spreadsheet systems. As a result, the data transfer is mere child's play: Simply enter the field names in the first line of the table, and the LSM Workbench's import routine automatically generates the input file for your conversion program.
The LSM Workbench lets you check the data for migration against the current settings of your customizing. The check is performed after the data migration, but before the update in your database.
So although it was designed for uploading of legacy data it is not restricted to this use.
We use it for mass changes, i.e. uploading new/replacement data and it is great, but there are limits on its functionality, depending on the complexity of the transaction you are trying to replicate.
The SAP transaction code is 'LSMW' for SAP version 4.6x.
Check your procedure using this Links.
BAPI with LSMW
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI
For document on using BAPI with LSMW, I suggest you to visit:
http://www.****************/Tutorials/LSMW/BAPIinLSMW/BL1.htm
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
<b>Reward points for useful Answers</b>
Regards
Anji

I have read all the questions regarding the "Can't send photo using iMessage".

I have read all the questions regarding the "Can't send photo using iMessage". I followed everything and check everything that was in it. It's still the same. I am still not able to send a photo. It started happening last week. It was fine before that. There is no error message.
It will try to send but it will get stuck just before it sends
and the red ! will appear with the "Not Delivered" status.
When i tap on the !, it just says "This iMessage was not delived".
No other message or photo is sending as the same time as the photo.
I did reset it, I checked the email address, removed it as well. Turned it off then back on. Signed out and signed back in. Wi-Fi strength is very good. iOS is 6.0.1. I checked for updates, it is up-to-date I also checked a link http://support.apple.com/kb/TS2755. It did not help at all.
What's wrong?!?!?!?!

It is not a matter of reconsidering the decision. There are unsolveable technical problems with trying to run a program such as Firefox on Blackberry OS. We would need Blackberry to distribute a tool similar to Android's NDK to run on Blackberries.

Creating RosettaNet data types in XI 2.0: 'xml:lang' attribute

Has anybody successfully created a RosettaNet interface in XI 2.0?
I am working with the PIP 3A2 messages, but some of the elements have an attribute named 'xml:lang', which is a standardized attribute from the W3C's XML namespace. The attribute name is declared as 'xml:lang' because it's still a DTD-based PIP. Normally, in schema, this is handled by declaring an import of the xml.xsd file provided by W3C and defining the namespace alias 'xml' to point to it in the RosettaNet schema. The xml.xsd provided by W3C boils down to the following declaration, to support 'xml:lang' as an attribute...
<xs:schema targetNamespace="http://www.w3.org/XML/1998/namespace" xmlns:xs="http://www.w3.org/2001/XMLSchema" xml:lang="en">
<xs:attribute name="lang" type="xs:language">
</xs:attribute>
</xs:schema>
I'm trying to create this interface in the XI 2.0 data type editor, but...
1. I can't create attributes as standalone data types in alternate namespaces (to simulate the declarations in W3C's xml.xsd).
2. I can't link a standalone attribute declaration from another namespace to an attribute in the editor.
3. The editor prohibits use of a colon in the attribute name (as it should), so I can't declare the attribute name to be 'xml:lang'.
4. I can't figure out how to control the addition of a new namespace alias to 'xml'. The editor wants to use default names like 'p0' when I bring in types from other namespaces.
Can anyone suggest where I should look for an answer?
--Dan King
Capgemini

Hi Dan,
You can design and Test Rosettanet PIPS Messages in XI-3.0 only.
Regards
Prasad
SAP Netwaver RIG-XI
SAP Labs LLC, USA

Technical question regarding xml:lang...

Similar Messages

Maybe you are looking for