Technical Question - the answer might help diagnos...
What would cause the following behaviour on a speed tester?
http://www.speedtest.net/
Test run on several different servers 3 times each.
For the majority of the test it hovers around what BT's speedtester agrees with.
then at the end it jumps to 30-40Mbit or even in one case 90mBit at the end...
As I said I see this behaviour on several differnt servers multiple times each.
What is BT doing to make that happen?
This behaviour was not happening before I had speed toubles then when it started to happen my service started to degrade. So I can reasonalby deduce that what ever makes the speed test reading so weird is what is effecting my service (aprt form the shed load of other people on my exchange that is)
Download speedachieved during the test was - 81987 Kbps
For your connection, the acceptable range of speedsis 1000-99999 Kbps.
Additional Information:
Your DSL Connection Rate :15323 Kbps(DOWN-STREAM), 888 Kbps(UP-STREAM)
IP Profile for your line is - 13000 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 11.33:30.25:58.43 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
LOL
Similar Messages
-
for some reason apple thinks ill know the answers when im trying to change them haha :/ does anyone know how to bypass this or any other way to change the security questions for your account?
Welcome to the Apple Community.
Start here, and reset your password, you will receive an email with your new password, then go to manage your account > Password and Security and change your security questions.
If that doesn't help you might try contacting Apple through iTunes Store Support -
I try to buy from my iTunes program and I can not buy me a message appears stating that I am the first time Buy and necessary to answer the questions, but I do not remember the answer please help
You are not addressing Apple here we are just users like you.
Security questions
Read this note for information on how to reset the security questions http://support.apple.com/kb/HT5312
This user tip may also help you Security Questions -
HT5312 I forgot my Secret Question's answers please help me out!
I forgot my secret Question's Answers I want to buy some app from Apple but it asks me my secret Questions answer that I forgot, please help me out!
Thanks and Regards,
emamDidn't the link to contact the iTunes Store staff in the 'Additional Information' section of that article work for you? If you don't already have a valid rescue email address, only Apple itself can assist with recovering lost answers.
(88586) -
HT5312 I forgot assistance questions and answers please help
If you allow I forgot answer the secret question I ask you to help and thank you
<Email Edited By Host>These are user-to-user forums, you are not talking to Apple here - I've asked the hosts to remove your email address from your post
If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address then see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551 -
Ok I am really a new user of Mac so here is my problem when I bring up Safari and I go over to the Help word on the top of the screen to find a question when I pick a question and the window comes up there is a blank window nothing is there the help boxes work on my other Apps so whats wrong. Help
Could you please give us a picture of what is going on. This is a picture of what the top of Safari looks like when I go to the Help menu. I typed in the word cache and a number of options appeared below. Is this not happening for you?
-
Is Skype the answer? Help!
I desperately want an iPhone. Here in the UK the iPhone is available only on the O2 network, which has no reception in my house. I thought of a possible solution but wondering if it will work and what drawbacks might be - if I were to get the Skype app, could I then forward my iPhone calls to a Skype number on my way home, then use the phone via Skype over my wifi connection while I'm at home? Would I be able to receive SMS messages at home using this set up? And presumably I would pay the cost of every forwarded call?
Thanks in advance for you help.
RHi Richard,
I am in Reading and I use the Skype app at home (through BT broadband). I've got Skype set up so that it presents my mobile number when I make skype calls.
I can't 100% help you but:
If you have absolutely no signal in your house you won't get SMS messages but my experience (reception is variable in my house) is that SMS messages come through on very poor signal.
My expectation is that you will pay for the phone calls to be forwarded to skype and that they probably won't be included in the call bundle you get from O2 (so even if you get hundreds of minutes you'll pay for the forwarded calls to skype).
On the other hand, I can tell you for sure that the skype app works very well on the iPhone. I regularly use it to call the US and business contacts in Germany. Last week I was in Berlin and used free wi-fi in the hotel to call my wife's hotel in Cork - about 1p per minute instead of 35p to make a call and 18p for my wife's mobile to recieve on roaming charges. I would thoroughly recommend the skype app on the iPhone for overseas calls. -
Authorization question - Need Answers - Please help
Hi,
I have collected the following questions. Can you please answer? Thanks.
1) What is Authorization object
a. Collection of Authorization fields
b. Authorization fields fill with Values
c. Group of Authorization Key.
d. Authorization object fill with Values.
2) Which of the statement below accurately describe when S_RS_ADWMB will be used.
a. when using transaction code RSA1, the administrator work bench
b. when creating new query in the Bex Analyser.
c. When updating source system in RSA1
d. None of the above.
3) which of the following objects protect ODS data.
a. S_RS_ODSO
b. S_RS_ODSP
c. S_RS_ODSS
d. S_RS_ODSA
4) When would you use the $ in an authorization value?
a. If you are using user exit to fill the authorization values at runtime.
b. If you have cost centres that starts with $
c. Anytime you want to grant all values: $ is just like * in the SAP R/3
d. If you want all variables to be filled with authorization values at runtime.
5) Hierarchies are used in SAP BW to rank Employees.
a. True
b. False
6) RFC destinations tell SAP systems where external systems are located.
a. True
b. False
7) Which are the following objects are used for infosource with flexible updating
a. S_RS_ISOUR
b. S_RS_ISRCM
c. S_RS_ISOCR
d. S_RS_ISCOM
8) Which of the following regarding Info area is correct
a. Group of Infocube.
b. Group of Infosource
c. Group of source system
d. Group of actual data.
9) Field S_RS_COMP can protect the query elements by infoarea,infocube and query name that user is trying to access.
a. True
b. False
10 ) Authorization object S_RS_HIER is used when creating infocubes.
a. True
b. False
11)If the info object is authorization relevant then it must have authorization object.
c. True
d. False
12) What is composite role.
a. Includes number of roles
b. Single role including number of authorization keys\
c. Role within a role
d. None of the above.
13) EP uses same role for portal access.
a. True
b. False
14) You must include S_RFC in any role used by reporting user.
a. True
b. False
15) Same BW role can be used for another BW system using the same client.
a. True
b. False
Advance Thanks,Can anyone please help me urgently?
Advance Thanks. -
How do I switch from one column to the next, skip around? Tab key doesn't seem to do itl. I can't find any "help" in "help". Help. Please. Thank you.
Hi Karen,
It is simple.
Columns fill with text as the text becomes enough to spill over from the previous column. Below is an example. I have used a huge (6" botom margin setting to shorten the page to a reasonable length for a screen shot, and turned on Show layout and Show invisibles so the column boundaries and invisible characters can be seen. Here there's no text in column 3 as there is only enough text to fill column 1 and part of column 2.
As more text is added, it eventually fills column 2 and flows into column 3:
You can force the text into the next column by inserting a column break. Here, a column break has repalced the paragraph break in column 2 (after 'fascilisi."):
Regards,
Barry -
2 questions needing answered (plz help)
My first question is this...
In LE8 can you take a drum pattern you made in the arrange window and make it into a audio file so u can cut up and audio wavs?
my second question is this.. my built in microphone broke on my laptop, can i get a USB microphone and plug it in and use in Logic? If it's possible i would know how to set it all up myself, but i am just wondering if u can
thanks
http://www.myspace.com/sibeatz07 (check out my newly mixed song Free Love)Hi,
to use the USB Mic, be warned Logic can only use one Audio Device at a time, so if you use the USB Mic as Device, Logic will find no outputs. <G> You can work around this FRRREEEEEQUEENTLY asked question by establishing an aggregate device. Just to have you warned before The Aggregate Device must contain the USB Mic as input and your speakers (maybe the built in speakers of your mac) as output.
However, i would not recommend an USB Mic. Buy a decent 150$ Audio Interface and a 100$ SM58 instead, and you'll be happy for a mac's lifetime.
Cheers,
Fox -
Continued..my security answers have been changed, I think ID hacked, email and sec answers changed. How do I delete it? By the way it is not this ID, I had to set up a new one to use this site....
Did he have find my iPhone enabled under that iCloud account? If so, add the account back to his phone. Then in the iCloud account settings, disable find my iPhone first (you will be prompted for your password), then remove the account.
Now you can create or add a new iCloud account to it using his own AppleID.
Alternatively, you could log in to your www.icloud.com account in a web browser. Using the find my iPhone app there, remove his iPhone from your list of associated devices (he will have to power his iPhone off for you to do that).
After his iPhone is set up for his own iCloud account, on your iPhone, go to
settings->iCoud->Storage & Backup->Manage Storage and delete his iPhone's backup file to make more room on your own iCloud storage account. -
OnSync question need answer plz help
Do I have to specify a remote shared object in the onsync
event of my main application ? What are the consequences of not
setting the object in the main applications onSync events?
Because i have a remote shared object that works properly as
long as i don't specify it in the onsync event of the main
application........the object is being set as SO.data.slot0 =
SO.data.slot0*1 +1; in the main application
The initial value of SO.data.slot0 is being set outside the
main application in an admin console to the value of 1.the reason it was causing problems is because i was
incrementing the number so it continued to fire ..........this is
the code for the problem [code] SO.data.slot0 = SO.data.slot0++;
[/code]
I'm not 100% positive why this caused onsync to fire
continueously but when i removed it the onsync function was normal
and the app continued to work perfectly so i thought i would ask an
expert if there is any light you feel that is important to shed on
this subject plz feel free to add your 2 cents. -
hello,I have a problem with security questions.i don't remember the answer,please help me. i don't know how to manage this
You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(104775) -
I am trying to purchase apps for my new iPad but must answer security questions to do so; however, I have forgotten the answers. Help!
Go to the Support button above right, connect to the Express lane, iTunes, Manage Account, then change password and security...content cannot be recovered so must be changed.
-
I'm unable to change my security question answers. It keeps asking me for the answers and I don't know the answers. I've reset my password 2x and it still won't let me change the answers. Help!!
See Kappy's great User Tips.
See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities https://discussions.apple.com/docs/DOC-4551
Send Apple an email request for help at: Apple - Support - iTunes Store - Contact Us http://www.apple.com/emea/support/itunes/contact.html
Call Apple Support in your country: Customer Service: Contacting Apple for support and service http://support.apple.com/kb/HE57
Cheers, Tom
Maybe you are looking for
-
Voice memos do not delete from iPhone...
How do I delete the voice memos that are stored on my iPhone 4, and are no longer on my MacBook Pro? My voice memos folder on my MacBook Pro was over 4 Gb, so I copied its contents to an external hard drive. I left the folder and deleted the voice me
-
Just installed CC on my PC, Windows 7, 64 bit system. Not seeing any applications on the desktop or installation folder. However, all the resource files are present in the installation folder. What am I doing wrong? I've installed three times with no
-
I'm using Adobe Media Encoder to convert my MOV file to H264, and selecting "YouTube 720pHD" (for Instagram) as I was instructed by someone at Adobe over the phone. But it inserts a black frame at the beginning or end. When I open the converted file
-
When downloading files the file name changes name?
When I download files from yahoo email account the file name changes from actual name to securedownlad.doc. Why is this happening and how do I stop it? Is it an email client issue? Example: Original file name in email to download is called GeorgiaTec
-
Recommended plug-ins/apps for panorama stitching in Aperture?
Does anyone have any recommendations for photo stitching plug-ins/apps that "play well" with Aperture? I end up taking a large number of panorama series (horizontal, vertical, and occasionally 2D grid), and I would love to be able to select a stack i