Technical specifications for adding a field in screengroup
Hi ,
I have a view profile say FL . In the activity and layout view I have added a Tab say "85" -Additional data 3- . Now I have made tab active and used 150 ans screen group "150-USER data"
I want developer to add a new cusom filed in screen group 150-user data .
Specification for field is ready .
Question is
1) How to know which table this screen group 150-user data belongs to so that developer can add it there ? Or is there any other method of specification .
2)I wil be using this field in equipment also . However in equipment I would like to control data orgin from FL or individual maintenance . How to enable this feature in custom fields of equipment master data .
NPB
NPB,
Normally the user defined fields are filled through the user exit and the user exit documentaion would help you in identifying which core table needs to be extended to include the custom fields.Have a look at the same for help.
1) In your case the custom fields needs to included to EQUI or IFLOT or EQUZ or ILOA depending upon your business needs.Have a look at the user exit (ITOB0001 )help for detailed documentation.
2). It would probably require additional coding to accomplish this requirement(Visibility of transfer or individual maintenance for these custom fields), but it should be possible through the same user exit and or save user exit (IEQM0003 Additional checks before updating equipment).
Regards
Narasimhan
Similar Messages
-
EDI-IDOC: want to generate Reference Specifications for Bank Details field
Hi Guru,
We are running to the situation that we use EDI with China vendor (using China bank account). The bank account for China has greater than 18 characters which is the maximum limit for bank account field. Based on note 96624, we are suggested to maintain the exceeding amount into the "Reference Specifications for Bank Details" field. However, when I run the payment on F110, IDOC do not generate the reference field.
How can the bank reference field be included in the IDOC?
Thanks,
SongHi Auro,
You use use EDI_DC-SNDSAD field, currently this field is used no where.
If you not sure where to see double control record and click address info tab
you can use either field receiver or sender.
For testing use WE19 transaction and pass your paymethod to following field
and then inform to EDI Mapper that your sending paymethod in this field.
For them this field is very easy to grab.
Let me know if you any concern.
Thanks,
Narayan -
Screen Exit for adding custom fields in Additional Data tab in ME21N
I need a screen exit or whatever other method for adding custom fields to the additional data tab at header level.
I also need a similar exit for adding a filed at item level.
Thanks in advance
MartinHello,
1st find badi or exit and then create screen ...and assign the screen group and screen no for that implementation....some steps i can give u i did with SPRO tcode....
please check it for VA02
SPRO u2013 SAP Reference IMG --- Logistics General --- Basic partner u2013 customers -- Control u2013 Adaption of customers own masters data element u2013 prepare modification of customer free enhancement of customer master record
1)Screen group description
zs creating badi --- (save)
click on (label tab pages) u2013 new entries
number u2013 10 , function code u2013 zs10 , description u2013 func ---(save) u2013(back)
2)select (FM_CUSTOMER_ADD) u2013 copy
Implementation name u2013 ZAS
(desc u2013 impl for cust) u2013 (save)
interfaceu2014(check_add_on_active) double click on it
3)the above screen appear -- write the code in it u2013 (save) --- (activate) u2013 (back) u2013 (save)
-- (activate) u2013 (back)
Business adds in customer sub screens
4)select (FM_CUSTOMER_ADD) u2013 copy
Implementation name u2013 ZAS1
(description -- cust) u2013 in attribute u2013 (give screen group name)
5)go to interfaces (GET_TAXI_SCREEN) double click on it
(save) --- (activate)
6)(SAVE) --
Goto SE38 -- CREATE PROGRAM WITH NAME (ZQW) type module pool
Goto SE51 -- Prog : ZQW
Screen : 200 (Create)
Goto layout u2013 design the screen
7)save u2013 activate
then goto transaction : va02
For User Exit's
goto to tcode->status->program name->double click on that,
then goto to-> attribute take the package name and
Goto SMOD tcode ->Utilities->give the package name and F8
then a list of exits will display for that tcode as well as that package.
u can check the table MODSAP
u can check the table MODACT
For BADI's,
1)goto to tcode SE24 give the CL_EXITHANDLER and display and then double click on the GET_INSTANCE
keep Break point at this location 'call method cl_exithandler=>get_class_name_by_interface'
then the tcode it will trigger there and we can debugg there we can find badi'for that tcode and then remove the break point.
2)Goto to tcode->status->program name->double click on that program will display's
then press crtl+F then cl_exithandler
Thank u ,
santhosh -
Technical specifications for ECC 6.0
Technical Specifications for ECC 6.0
Posted: Oct 8, 2007 7:49 AM Reply E-mail this post
Hi,
I am planning to buy a laptop & install ECC 6.0 for the trainings, just wanted to know what technical specifications & additional system components , accessories services should I look for?
Kindly help asap...
Points will be rewarded!!!!
Regards,
PoornimaHi Poornima,
Check the similar thread on the system requiremement specifications for ECC6.0:
Hardware requirements for SAP ERP 2005 using ECC 6.0
Regards,
Subhasha -
A technical specification for MC007ZE/A
Hello!
Let me know can I get a technical specification for MC007ZE/A. Our organization is going to buy a big batch of these displays. For this we need a technical specification. I've found out this document http://manuals.info.apple.com/MANUALS/1000/MA1554/en_US/LED_Cinema_Display_27-in ch_UG.pdf but it does't containt the number 'MC007ZE/A'. This paper formality associated with the features of our supplier.Click here for information; the ZE and LL are country codes which don't affect the model's specifications.
(106313) -
Product Specification or Technical Specification for a HP G6000 laptop?
Does anyone have or know where I might find the Product Specification or Technical Specification for a HP G6000 laptop? I'm particularly interested in the hard drive installed. My daughters laptop HD has crashed so I can't even boot it up to find the HD spec., and although I have removed it, I find it is a Toshiba HDD2D62 120GB Sata 2.5". I can't find a similar one anywhere or a website that provides a suitable compatible HD. Any suggestions anyone?
This question was solved.
View Solution.Hi,
The laptop is probably a SATA I one so SATA (not SATA II) hard drives should work on the laptop. I believe that any SATA hdd up to 160GB should work.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"* -
Technical Specification for Enterprise Portal
Our EP consultant left without delivering Technical Specification. Now, we need to prepare this document mainly for handover to support team. Coming from BW background, I have little knowledge on what is expected in the document.
What I can think of at the moment are that we need to document the followings:
1. Portal Content structure
2. iViews Configuration
3. Portal Display
Is there anything else missing? Or can someone share with me the structure of a complete Enterprise Portal Technical Specification?
Thank you very much!Hi M. Syuhair,
That's a rather unfortunate situation that you have walked into where the implementer has left without documentation.
I would start the document with a blueprint diagram of the platform landscape, with each of the logical instances purposes described. You should include the OS and DB versions and any specifics on security zoning you may have. Then move into a diagram for transport flows and description of the purpose of the Portal. i.e. used for BI and ESS/MSS scenarios.
Also I would describe the integration with the solution, how security is provided, what other components are integrated (i.e. document repositories), how transports are performed (CTS, NWDI etc) and what systems are connected and SLD connectivity. Also mention UWL and Adobe services if they are deployed and anything else that represents significant usage.
After this point you can dig deeper into the detail and provide a description of the details of the business packages with versions you have deployed to the portal (use the NWA to look up package versions if you donu2019t know this already) along with the name spaces and PCD hierarchy that has been chosen to ensure standards are followed during maintenance by the support team.
Remember your support staff should be starting with at a minimum a basic understanding of standard SAP Portal implementations so getting to the detail of how each iView is configured would be taking the document too far.
Your purpose of the document is in providing the framework for support to be able to know what standards they should follow and how to quickly find out the implementation specific details. This should be your objective.
Starting this from scratch without any portal experience is not advisable, I would suggest you engage another Portal consultant to perform the task as familiarity with the core solution is really a must.
Regards
Daniel -
Reinit/Reload for added/changed fields in PO line item and GL ODS
Hi all,
Probably this is usual process in SAP BW.
I have changed 2Lis_item data source and added few fields in 0Pur_o1 ods.
In ods there is data from 2006 to till date.
Now I have to move my changes to Production system. I have to delete and reload compele data again then only I will get values for added fields.
Similar way I have changed 0fi_gl datasource and added few new fields in GL field.
What is the best approach I should follow to get all history data with all new values and start delta ?
thanksOk,
Just do this:
You've your GL ODS with data from 2006, 2007 and 2008.
You've deltas running.
Before transporting your changes to productive run all the deltas.
Then transport your changes.
After that if you want the history to be updated with your changes you should delete your delta and create a new one without any data (delta init without any data). That should mark the flag init from that point.
This means the next delta will bring any changes created from that new init to front. To load the history you can do full repairs until you have load all your data.
Diogo. -
Development of Technical Specification for WDA
Hi,
I've not seen any new information on a Technical Specification template specifically for WDA.
Has there been any new developments on this since last year?
Where can I download the T.S. if it is available?
Thanks.Index:
DOCUMENT INFORMATION
ACCEPTANCE
STAKEHOLDERS
BUSINESS KEY STAKEHOLDERS
OTHER KEY ROLES AND RESPONSIBILITIES
1. CONFIGURATION FOR PROJECT
2. DATA STRUCTURES
2.1 APPLICATION DATA STRUCTURE MODEL
2.2 DATA ACCESS OBJECTS
3. SYSTEM INTERFACE PROCESSES
3.1 SYSTEM CONNECTIVITY MODEL
3.2 SYSTEM INTERFACE DEFINITIONS
3.2.1 Interface Definition:
<Name of the interface e.g. BAPI/RFC, Webservice, Bean etc >
<Name of the interface e.g. BAPI/RFC, Webservice, Bean etc >
3.2.2 <BAPI/RFC, Webservice, Bean >Definition:
<Name of the interface e.g. BAPI/RFC, Webservice, Bean etc >
4. OBJECT DESIGN
4.1 WEB DYNPRO COMPONENT MODEL
4.1.1 Views used in the WD Component
4.1.2 External Components used in the WD Component
4.1.3 Interface Controller used in the WD Component
4.1.4 Custom Controllers used in WD component
4.1.5 Events, Actions and Methods
4.1.6 Context Elements Defined in WD Components
4.1.7 Context Binding/Mapping in WD Components
4.2 ABAP RFCS
4.2.1 RFC Summary:
5. USER INTERFACE SCREEN DESIGNS
5.1 VIEW ARRANGEMENT (WINDOWS DIAGRAM)
5.2 NAVIGATION MODELING
5.3 WEBDYNPRO VIEW DETAILS
5.3.1 <View Name>: <This view shows information related to view including screen shots.>
INPUT DATA:
OUTPUT DATA:
6. APPENDIX A u2013 OUTSTANDING ISSUES -
QA01 enhancement for adding new field
Hi,
We have done an enhancement in transaction 'QA01' for adding an additional feild. We have used the user-exit 'QPL10004' and using sub-screen '0100'.
But when we are testing in quality server, the sub-screen in 'QA01' is displayed as '0212', hence the enhancement does not take effect. But when we check the sub-screen in development server the sub-screen is displayed '0100' and the enhancement works here.
Please suggest any suggestions?
Thanks,
RRHi,
Kindly check all the objects from the customized request imported successfully.
Regards,
Anil -
Screen exit/BADI for adding custom field in IW31/IW32
Hi all,
The requirement is to add the permit field in the Header component of IW31. Searched SDN and found user exit IWO10018 for the same which includes a screen exit.
The activation of the same is adding a tab in the screen while user wants the field under header Component tab.
How this can be done. Any suggestion.
Thanks
anyaHi,
You can perform append structure to add your custom field(s)in VBAP table. Next step, go to SE51 (Screen Painter)to modify SAP Program SAPMV45A Screen number 4459 for Additional data A or Screen number 8459 for Additional data B to add your append structure custom fields.
Once the above steps done, you can place your logic to populate custom fields in include program MV45AFZZ. i.e USEREXIT_MOVE_FIELD_TO_VBAP.
At the end, please ensure all program and screen are activated. Hope this will help.
Regards
Kiran Sure -
KE5Z : UserExit or SAP Note for adding new fields in the report output
Hi,
I want to add 2 new fields in KE5Z (Profit Center: Actual Line Items) report output.
Order reason(AUGRU), Sales Document Type (AUART) fields.
Is there any UserExit or SAP Note available for this....
Thanks in advance,
fractalHi Fractal,
See if Note 92864 will help you.
Summary
Symptom
Through a modification, it is possible for you to include additional fields in the profit center line-item reports 'actual' and 'plan' (Release 3.1*).
Additional key words
KE5Z, KE5Y, RCOPCA02, RCOPCA08 -
SUPPORTGUIDE 20010613143936 -
REPORTWRITER,
SGRW_OM SGRW_PS SGRW_PC SGRW_SL SGRW_PCA SGRW_EC SGRW_LIS
Cause and prerequisites
The fields must be located in table GLPCA (for actual) or GLPCP (for plan).
For Release 3.0F, you should ensure you have applied Note 62511 first.
Solution
To include a field in the actual line item report, proceed as follows:
Call the ABAP/4 Dictionary (Transaction SE11) and display table GLPCA. You can then find in a line the field name and data element for the field you want to include.
Return to the initial screen of the ABAP/4 Dictionary. Now change the structure RPCA2. If the structure does not yet contain the field, you select Edit -> Insert field; enter the field name and data element. Do not insert the new field at the beginning of the structure but in the rear half of the structure.
Then save and activate the structure.
Now call the ABAP Editor (Transaction SE38). Change the source code of program RCOPCA02. Insert the lines set out in the attachment in FORM routine FIELDCAT_FILL. When you do this, replace SGTXT by the field name of the field. If you normally want the field to be displayed when you the access the report, delete the line afield-no_out = 'X'. "<<<< insert Note 92864 .
You should note that the place where you insert the lines influences the position of the column in the report list.
To include a field in the Plan-line-item report, carry out the same procedure except with table GLPCP, structure RPCA8 and program RCOPCA08.
Note: Pls check if these 2 fields are available in any of the layout versions you have available with the transaction.
Cheers,
Vikram
Pls reward for helpful replies!! -
Exit or badi for me21n- for adding new field in delivery tab(Item level)
HI,
My Requirement is to add the New Field(Inspection Lot) in delivery tab in item level of me21n .
I want to know this can be done by any Exit or Badi or modifying the standard sap is the only way to do this...
Kindly help me to solve the issue..it's quite urgent , i unable to find one,i used the exit mequery1 but did not work ......
Thanks in Advance.Hi Nagaraju,
Actually,for every T-code,SAP has provided a lot of BADIs where the customer can write their own codes depending
upon the functionality required.
In order to find the BAD for a particular T-code,go to the T-code SE24 and type in cl_exithandler and click on
Display.
You will get a list of methods in that class,double click on the Get_Instance method from the list.
you will get the code for that method.Scroll down and you will find one of the parameters "Exit Name" there.Put a
breakpoint on that function module and press F8.
In the debugging mode,double click on the Exit Name to get the value contained in it.You will see the first BADI
provided in that T-code.
Note down this and then keep on pressng the F8 and noting down the BADIs being displayed.
Now ,you will have to find out the BADI which fits your requirement.
Now,it is not required to opy that BADI into ZBADI.Instead it is better to create a new implementation for this
BADI.
Go to the T-code SE18 and see its definition.
Now,go to the T-code SE19 and create a new implementation and write the code there.
Once done,activate that implementation and the BADI also.
Now run the T-code and debug the code that you have written.You can modify the code accordng to your requirements.
In case you have any further clarifications,do let me know.
Regards,
Puneet Jhari. -
VT01N User exit for adding additional field to VTTP table and populate the
Hi,
Can any one sujjest what is the use exit/bapi when we add(append) a custom field to vttp table to populate the incremental number based on ship to address when we create a shipment..
need user exit in ...............to populate data to vttp table custom field when we append......hi,
check these exits for vt01n.
Transaction Code - VT01N Create Shipment
Enhancement/ Business Add-in Description
Enhancement
V56USVDP Preparation for updating new objects for transport?
V56USVDO Update new objects for transport
V56USTAT User-individual definition of transportation planning status
V56UNUMB Shipment number allocation
V56UDLUP Obsolete as of 4.6C: Delivery Update on Delivery Routines
V56UCHCO Check shipments are complete
V56UCHCH Shipment processing: Check whether changes were made
V56TDLIF Filter Delivery Items for Shipment
V56SLDET Shipment processing: Leg determination
V56MVT04 Extensions for Collective Processing of Shipments
V56LOCID Shipment Processing: Determine Location Identification
MV56AINI Initialization of transaction control for transportation
V56AFCCH Shipment processing: Check function code allowed
V56AGTAR User Exit for Filtering Shipping Unit Calculation
V56ARCHV Customer-spec. checks for archiving shipments
V56ATKTX Change the number of lines for text input in shipment
V56BMOD Transportation processing: Field modification
V56DISTZ Shipment Processing: Determine Distance
V56FCOPY Shipment processing: Copy delivery data
V56FSTAT Shipment processing: Activities when setting a status
V56L0001 Status of Shipments for a Delivery
V56LDELI Read Delivery Data for Shipment Processing
Business Add-in
BADI_LE_SHIPMENT BadI: Shipment Processing
BADI_V56N User Exit for Message Determination: Shipment -
XRPM: Need to find the BADI for adding custom fields to master data
Hi,
We have activated XRPM(4.0) business content and need to add some custom fields to some of the master data ( for example need to add custom fields to master data info object 0RPM_IHGU, 0RPM_IGCG etc).
We have enhanced the data sources ( 0RPM_ITEM_HEADER_GUID_ATTR and 0RPM_FIN_CAT_GUID_ATTR respectively) in the source system by appending additional fields to the append structure of the data source We are trying to find the BADI where we can implement the custom code.
Can anybody help to find the particular BADI, id there one for all master data carrying data source in the xRPM source system?
ThanksDear Arunava,
1) In your R3 goto SE16 --> open table ROOSOURCE.
Search for your OLTP source...eg: 0RPM*
The column EXTRACTOR will give you the module name.
2) Also look/follow the link:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9f668696-0701-0010-22be-a278e4587b68
Currently available BAdIs include:
RPM_BUPA_CUST_FIELDS BUPA customer fields
RPM_CALC_BUPA_BPFTE Calculate the business partner availability
RPM_CALC_STAFF_ICON calculate the staffing icon
RPM_CREATEUSR_NAME Generates user names
RPM_HR_IN_IF001 Customer exit for inbound time processing
RPM_HR_IN_IF002
RPM_HR_IN_IF003
RPM_HR_IN_IF004
RPM_HR_IN_IF005
RPM_HR_IN_IF006
RPM_INTEGRATION_OPTS get and set the project integration options
/RPM/OBJECT_SERVICES Object support services
/RPM/PERSON_CUST_FLD Resource customer fields
RPM_PROCESS_DATA Inbound processing of time data by customer
Good Luck, BB
Maybe you are looking for
-
Error when scheduling job for Job Control LO
Hi all, I tried to schedule the job for collective update after I set the job parameter in tcode LBWE for LO Data Extraction. But they said 'Error generating job' without any description why. Maybe you can help me about this since I still can't do th
-
Why does ppi matter for web images?
Hello When placing an image in my (web/pixel) project the resolution is dependent from the set ppi. When I create a new document for web, then logically only the pixels matter. Nonetheless there's a ppi field, why? And depending what value it has, pl
-
Approval Preview Graphic not syncing with Approval Text in SRM 4.0
We are currently using SRM 4.0 in an extended classic setup and have the following issue. When creating a shopping cart/PO in SRM and looking at the approvals pending/processed or waiting the approval preview screen is different when choosing graphic
-
Is anyone having problems with the "home" button not responding after upgrading to 5.1.1?
-
Safari icloud tabs not working between ipad mini and iPhone 5
I have an ipad mini an iMac a MacBook Pro and an iPhone 5. All running the latest operating systems. The ipad mini and iPhone 5 can't see each others open I cloud tabs in safari. Anyone know why? Private browsing is off on the devices. Thanks.