Technical specifications

hai every body,
can any one please send me the any technical specification document which is created for any BDC program.
points will be rewarded.
Thanks

hi find,
there is no special tech spec for bdc ,
check this for test tech spec.
how to convert Functional spec to Technical spec
how to convert Functional spec to Technical spec
Check these links, it will give you a nice idea -
http://www.sap.com/services/consulting/servicecategories/technicalimplementation/abapjavaconsulting.epx
How to write a technical spec
How do you prepare technical speck?
Re: How to write Technical Spec
Technical Spec for Interfaces...
/message/1865271#1865271 [original link is broken]
http://****************/SampleSpecs/samplespecs.htm
Regards,
venkat.

Similar Messages

I have destroyed the motherboard of a Mid 2009 MacBook Pro. How do I find out the technical specifications so I can give accurate information to someone who buys it for parts?

I recently had an unfortunate incident with a glass of water and a mid 2009-MacBook Pro. 13 inch screen.
According to the techs at the genius bar, the screen, keyboard, chassis and hard drive (160g) were still all good - as were all components other than the Motherboard.
I just completed the complete erasure of the hard drive, but don't have the technical specifications at my disposal.
Does anyone know how I can get them - the guy at apple said he didn't think he could help?
Serial No. Is available.
Thanks-

http://www.everymac.com/

Using sample XML file from technical specifications, need a little help

Hello,
I copied and pasted the item text from the sample in the Apple technical specification. But there are a couple of places where I'm not clear what to change. I have a .M4V video file that I'm trying to podcast.
Where it says "length" I don't know what it's looking for, I already entered a "duration" just below. Also, what would be the correct term for "type" for a .M4V video file?
Then, there is the "guid" number and the actual file name as it is at the website. Can I make up any guid number, or does there have to be something at the site also called this, like the video file, which already has a name....confused.
Thanks,
TW
BOXX Windows XP Pro

Okay, I figured out what those entries needed to be, but I'm still not getting iTunes to recognize the feed.
When I put the text file on the server, what do I call it so iTunes finds it?
TW

WebDynpro Development Technical Specification Document

I am developing some custom screens using WebDynpro for our Project. I am looking for a template for Technical Specification document for WD development. I searched in SDN an Service market but could not find any. I only found a naming convention document. Can any one who has been developing suggest what should be the table of contents
Ex:-
Landscape
NWDI
Development Components
Views
     -- Methods
     -- Actions
Model Objects
    - RFC
Any template would be greatly helpful.
Thanks

Hi,
Template -Technical Specification document for WD development, should ideally include following topics and we are using document which has got same sections
a) Development Component
         Name
         Used Development Components
         Public Parts
         External files used
b) Web Dynrpo Components
        i) Web Dynpro Component
        ii) Used Components
        iii) Methods of Component - Each method explained separately
        iv)Message Pool
        v) Views - Each view explained separately with methods written, plugs, events
         vi) Windows
        vii) Component Controller interfaces
        viii) Any models used
         ix) Application
         x) Custom controllers
c) Dictionaries
d) Models
e) Web Dynpro Component Interfaces
The above part covers 90% what development activity involved, order can be changed to convenience
Reagrds,
Ganga
Edited by: Gangadharayya Virupakshayya Hiremat on May 12, 2009 6:21 AM

Why did Apple remove the search engine for serial numbers for technical specifications?

I use to be able to look at the specs of all my apple devices by looking up the technical specifications by serial number. It appears this function has been removed from the website. I would like to add that this feature of the website was incredibly useful and removing it creates alot of confustion for me because I would like to upgrade my MacBook Pro but am unable to find the technical specifications.

Append the last three characters of the serial number to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
(85784)

Technical Specification for Enterprise Portal

Our EP consultant left without delivering Technical Specification. Now, we need to prepare this document mainly for handover to support team. Coming from BW background, I have little knowledge on what is expected in the document.
What I can think of at the moment are that we need to document the followings:
1. Portal Content structure
2. iViews Configuration
3. Portal Display
Is there anything else missing? Or can someone share with me the structure of a complete Enterprise Portal Technical Specification?
Thank you very much!

Hi M. Syuhair,
That's a rather unfortunate situation that you have walked into where the implementer has left without documentation.
I would start the document with a blueprint diagram of the platform landscape, with each of the logical instances purposes described. You should include the OS and DB versions and any specifics on security zoning you may have. Then move into a diagram for transport flows and description of the purpose of the Portal. i.e. used for BI and ESS/MSS scenarios.
Also I would describe the integration with the solution, how security is provided, what other components are integrated (i.e. document repositories), how transports are performed (CTS, NWDI etc) and what systems are connected and SLD connectivity. Also mention UWL and Adobe services if they are deployed and anything else that represents significant usage.
After this point you can dig deeper into the detail and provide a description of the details of the business packages with versions you have deployed to the portal (use the NWA to look up package versions if you donu2019t know this already) along with the name spaces and PCD hierarchy that has been chosen to ensure standards are followed during maintenance by the support team.
Remember your support staff should be starting with at a minimum a basic understanding of standard SAP Portal implementations so getting to the detail of how each iView is configured would be taking the document too far.
Your purpose of the document is in providing the framework for support to be able to know what standards they should follow and how to quickly find out the implementation specific details. This should be your objective.
Starting this from scratch without any portal experience is not advisable, I would suggest you engage another Portal consultant to perform the task as familiarity with the core solution is really a must.
Regards
Daniel

Need Technical Specification on SAP Scripts

Good evening everybody,
Plz send a Technical Specification with coding on SAP Scripts. It is very urgent.
Thanks for sending in advance
Venkat

http://www.sappoint.com/abap/userexit.pdf
Hope it helps.
Regards.

Technical specifications needed for ECC 6.0

Technical Specifications for ECC 6.0
Posted: Oct 8, 2007 7:49 AM Reply E-mail this post
Hi,
I am planning to buy a laptop & install ECC 6.0 for the trainings, just wanted to know what technical specifications & additional system components , accessories services should I look for?
Points will be rewarded!!!!
Regards,
Poornima

Dear Poornima,
As per my experience,better to go for above 160GB hard drive(250GB will be
good) and 2 GB RAM is required for Laptop's.
All the best.
Regards
Mangal

Technical specifications for ECC 6.0

Technical Specifications for ECC 6.0
Posted: Oct 8, 2007 7:49 AM Reply E-mail this post
Hi,
I am planning to buy a laptop & install ECC 6.0 for the trainings, just wanted to know what technical specifications & additional system components , accessories services should I look for?
Kindly help asap...
Points will be rewarded!!!!
Regards,
Poornima

Hi Poornima,
Check the similar thread on the system requiremement specifications for ECC6.0:
Hardware requirements for SAP ERP 2005 using ECC 6.0
Regards,
Subhasha

What are the contents in technical specifications

What are the contents in technical specifications
could u plz explain clearly

hi rajeshreddy,
Below are the standards for Tech specs
1.1 Development Attributes
Program Name:
Title:
Application:
Development Class:
Message Class:
Program Type:
Execution Mode:
Schedule Frequency:
Variant:
1.2 Program Functionality
1.3 Output Fields
Output Label
Related SAP table-field (if any)
Length
Output Characteristics
1.4 Proposed Solutions
1.5 Solution to be implemented
1.6 Reasons of selection/rejection
1.7 Pseudo-Code / Flow Logic of the selected solution
1.8 Selection Screen
1.9 Database Tables Used
Table Name
Table Description
How the table is used in the program
1.10 External Files Used
1.10.1 External File Layout <file name>
1.11 Components External to Program Used
1.12 Error Conditions
1.13 Key Technical Test Conditions
1.14 Sample Test Data
1.15 Assumptions
1.16 Comments
regards,
amit m.

Queries about ASAP, OOAD, technical specification

Hi Experts,
1. Difference between ASAP and OOAD methodologies? With respect to SAP XI project, which methodology could be applied to get good results? Please explain about each, if we can apply both methodologies to XI projects. In real time which methodology is advised to follow.
2. In real time XI project, what sort of quality check/s can be performed on the developed interfaces? It would be great, if any checklist is provided.. before proceeding from Development to QA box.
3. Please clarify about the Technical specification, Functional specification..
-- Each business requirement have specific Functional specification document.
-- Each Functional specification have specific Technical specification etc..
for example, if we have 2 business requirements.. then 2 Functional specs and 2 Technical specs need to be created?
Can some one please clarify my queries?
Thanks in advance
..Shriya

Hi,
>>>>1. Difference between ASAP and OOAD methodologies
sap delivers only ASAP for XI: http://service.sap.com/asap then ASAP for XI link
>>>>3. Please clarify about the Technical specification, Functional specification
funcitonal - what you need to send - for example orders etc what kind of fileds etc..
technical - what kind of adapter and it's configuration can you use
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Industry standard to represent technical specification of forms,conf objetc

Hello Everyone,
I am in a process of creating design document for a Sun IdM project. I was wondering, is there any way to represent Form, taskdefinition etc in the document as we represent in JAVA, sth like Class diagram.
Is there any industry standard to represent technical specification for these things.
Any pointers would be of great help.
Thanks,
Saurabh

No as you have phrased the question. WebEx provides this functionality and that is the route you should be taking if this is a feature requirement.
If you are opposed to WebEx or require an on-premise solution, you may want to evaluate Cisco Unified Video Conferencing Manger (CUVC Manager) and it's desktop solution.

A technical specification for MC007ZE/A

Hello!
Let me know can I get a technical specification for MC007ZE/A. Our organization is going to buy a big batch of these displays. For this we need a technical specification. I've found out this document http://manuals.info.apple.com/MANUALS/1000/MA1554/en_US/LED_Cinema_Display_27-in ch_UG.pdf but it does't containt the number 'MC007ZE/A'. This paper formality associated with the features of our supplier.

Click here for information; the ZE and LL are country codes which don't affect the model's specifications.
(106313)

Technical Specification documentaion

Hi experts
I want to prepare Technical specification documet of my project , can any one please send the sample document , iam new to the BI in my company , so please any one send me the links or send to my id anilk7729atgmail.com. please s
Edited by: ramesh222 on Jul 27, 2010 7:54 AM

Hi,
TS doc contains all the information about what all the relevant structures has been created by you during the course of your developement. It will also contain the Design of your developement. Once you have entered the design then u have to describe each and every structures used in that design one by one with every minute technical details.
For example: If u have created any DSO...you have to give all the details about the same like all the key fields,and data fields and y the DSO has been created..Also if you have written any routine or code or formula...u have to describe the same also.
Simailarly for Info objects, infocubes , multiproviders and infosets if any created.
Hopeit is clear..
Rgds,
Amit Kr.

Technical specification

Hello all,
I have to prepare a technical specification for my project. I have a high-level technical design document and a functional specification. Do I need an existing technical specification template or do I need to create one using the above documents I have?
If I have to make one, does anyone have sample technical specification templates?
Please help.
Thanks very much.
Ramesh.

Hi,
Technical specification should include details such as Source, Target systems, Mapping involved, structures (data types) involved, which sender/receiver adapter is used, the technical details which need to be filed in them.....inshort it should have the details of all the objects that are created in Integration repository and Directory.
High-level technical design document and a functional specification will form the base for your technical specification document.
If this is not the first XI project in your company then you can find related documents from other Xi projects.
Regards,
Abhishek.
Edited by: abhishek salvi on Oct 6, 2008 4:56 PM

Technical specifications

Similar Messages

Maybe you are looking for