Technical Systems Not Reflected in SLD

Hi Experts,
Good day.
We are configuring administrative SLD as part of NWA setup in Solman dual stack as per Monitoring Setup Guide Netweaver 7.0 SPS 16. We have a separate productive SLD in XI.
As per the document, we need to have the data from XI forwarded to our Solman system. We have completed required settings in SLDAPICUST, RFC connections, JCO RFC Provider and SLD Data Supplier, added new data supplier bridge in XI pointing to our Solman system and afterwards, triggered data transfer from XI through RZ70 and SLD Data Supplier which is successful.
However, only the ABAP and Java stack of our solman gets reflected in our administrative SLD.
Via transaction SLDCHECK from ABAP, we're getting the following error:
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call returned exception code 3
Access to the XI Profile is currently disrupted.
From XI SLD logs, we have the following error:
#21 08/12/2009 14:49:46.531 [Thread-38] WARNING com.sap.lcr.sagent.BuilderDirector: Warning: SLD target system http://<host>:<port>/sld not available (incoming data will be ignored).
Thrown:
com.sap.lcr.api.cimclient.CIMClientException: Received response is not a CIM Operation Response! Check "http://<host>:<port>/sld" is the correct URL for the SLD CIM Object Manager and that user "User***" has access to the SLD via http.
at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:434)
at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:581)
at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:195)
at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:147)
at com.sap.lcr.api.cimclient.CIMOMClient.getCIMClass(CIMOMClient.java:538)
at com.sap.lcr.api.cimclient.CIMClient.getCIMClass(CIMClient.java:1185)
at com.sap.lcr.api.cimclient.CIMClient.getCIMClass(CIMClient.java:1196)
at com.sap.lcr.api.cimclient.CIMClient.ping(CIMClient.java:290)
at com.sap.lcr.sagent.BuilderDirector.performWork(BuilderDirector.java:645)
at com.sap.lcr.sagent.BuilderDirector.performWork(BuilderDirector.java:545)
at com.sap.lcr.sagent.BuilderDirector.run(BuilderDirector.java:459)
Thanks in advance for your inputs.
Best Regards,
Jen

Joel,
Please upgrade your SLD Data Model and CR and then see if that makes difference.
Also check Link:[Note 954820 - Compatibility of SLD in the system landscape]
Thanks,
Digesh Joshi

Similar Messages

Technical system definitions on multiple SLD servers in a SAP landscape

Hi,
If we want to migrate an SAP SLD server from Solution manager application to ECC application(s). In this process solution manager's SLD server data will be migrated into multiple servers at ECC environment(say for example, we define one SLD server for all development systems and one for Production systems).
Is it required to have all technical systems of SLD servers to be same? (I mean do we have to have all the technical systems defined on Dev SLD server to be available even at PRD SLD server?)
Thanks in advance for all responses.
NetWeaver admin.

Hi,
Yes. If you configured some technical system which reports data to your DEV SLD. And you want same data should be replicated to PRD SLD then you can configure data bridge between DEV SLD and PRD SLD. Then your DEV SLD will replicates its data to PRD SLD.
In order to configure data bridge, you can check below link:
http://help.sap.com/saphelp_nwesrce/helpdata/en/43/da21ba13660aa5e10000000a1553f6/content.htm
Thanks
Sunny

Technical system not available in Integration tab of Busines System SLD

Hi ,
I am creating a Business System in SLD(on Solution Manager) for XI system but not able to see any technical system from Integration tab of Business system.
I have already created a technical system in SLD.
Please suggest what other settings I need to check.
Thanks
Bhaskar

Hi,
Clear the cache and try again.
Go to Environment -
> Click on Clear SLD data cache.
If you still din't get then In the SLD goto technical system, in the dropdown box select your Technical system type(web as Java/....) and cleck on display, if it is there then it was created other wise it wasn't created.

Technical System Not reporting to Master SLD

Hi
We have multiple SLDs in our landscape for each landscape. We have a Central SLD in our Solutiion Manager systems. All the SLDs are configured to transfer the data to the master SLD through the Data Bride which reports everyday.
One of the SLD reports only ABAP systems to the master SLD. I dont see any java systems reporting to the master SLD from. The other SLDs reports both ABAP and JAVA systems well. SO I am wondering what could be the reaon for not reporting only Java systems that to onlyfrom one SLD system.
Mahesh Shetty

Hi Mahesh,
There is a lil difference. For a double stack target system, on the ABAP side, we maintain SLD connection details in RZ70, SLDAPICUST and RFCs LCRSAPRFC and SAPSLDAPI. Likewise, in Java side of the target system, the SLD Data Supplier entry in Visual admin needs to be maintained too. This will ensure the correct functioning of SLD for both ABAP and Java stack.
Once the above configurations are maintained correctly, in SLD-> Technical systems-> dropdown WEB AS ABAP will have the ABAP entry and WEB AS java dropdown will have the Java entries.
Rgds,
Soujanya

AS JAVA technical system not updated/registered in SLD

Hi,
We have setup the SLD bridge connection from our SLD with 7.0 SAP J2EE
server which is our local SLD to SLD with 6.40 SAP J2EE server which is the master or central SLD. Actually we have this set up, that we have configured a local SLD for our Netweaver 2004s SR2 or Netweaver 7.0 system and connect it to the central SLD which is also a Netweaver system but of lower release, Netweaver 2004 SR1.
Since Netweaver contains both ABAP and Java, I can see that our WAS ABAP technical system (of the SLD 7.0) was
succesfully registered and updated on the central SLD 6.40 but I cannot
register or update the WAS JAVA technical system (of the SLD 7.0) in the central SLD 6.40, but it can be updated in our local SLD which is then connected to the central SLD as mentioned.
Since my update for the WAS ABAP was already working and its updated
in the central SLD 6.40, what can we do to achieve the same result for the WAS
JAVA? Because if it works with WAS ABAP, what is wrong then with WAS JAVA? What might be the cause or some other configurations to be made?
Also can we synchronize the CIM updated with all the SLD? We want to
see if we can just update the CIM content of SLD 6.40 and pushed this
with the other SLD on the system e.g. SLD of 7.0.

Hi,
I think you should certain configurations for your system to be listed under SAp Java systems.
1.Go to visual admin,c:\usr\sap\SID\JCxx\j2ee\admin
run go.bat.
Then go to services-----SLD Data supplier.
go to Http settins under that,enter the details of central SLD you want to connect,
hostname,http port,sld admin user and password.save it.
go to CIM client settings,enter the same details there and save.
Then check CIM client generation test.it should be sucessfull.
then trigger SLD data transfer at the top left corner.
it also should be sucessfull.
Then your system will be listed.
2.may be you have to create a role called Lcr administrator with all Lcr* actions assigned to it.
then this Lcr administrator role should be assigned to ur administrator user.
hope this works.........
reward points if helpful............

Logical System not appearing in SLD

Hello Friends,
Logical System of SAP R/3 system is not appearing in SLD. The logical system is available in backend ABAP System. I have even run the RZ70 data collection programs as well. However, I am not able to populate the logical system names in SLD.
I have put the same logical system names in the client tab of the technical system but in vain. The logical system field is non-editable and I believe it is always non-editable unless some technical system is not assigned to it.
The logical system name is also not available in ID (if it is not in SLD then it won't be in ID as well).
[The SLDCHECK is throwing exception 4. what to do for this? May be the data is not transfered because of this? Even though I have maintained proper password in SLDAPICUST!!!]
Request your kind adivse on what can be done. Where can I lookout for possible errors.
Thanks & Regards,
Anand Patil

Hi
On SLD - > Technical System -> Client -> Logical System Name , generally It is Editable entity .
If in Your Case , You can not change it, chech with ut basis Guy , for roles and authorisation against your Username ,
Check the Same SLD Roles with some PI Service User.
Regards
Prabhat Sharma.

AS ABAP System not visible on SLD

Hi Gurus,
We have newly installed a CRM 2007 system (QA) and completed most of the post install activities. We have the requirement of connecting an XI system to the CRM system, and we are trying to configure the SLD. Here we are facing a wierd error. The AS ABAP technical system which is supposed to automatically show up on the SLD, is not seen. The AS JAVA technical system is seen but some details are wrong. Some explanation of the current scenario.
1. Our SLD system is a central system, on which the SLDs of all the systems are maintained.
2. I have maintained the PIAPPLUSER password in T-Code SLDAPICUST. This ID also exists in the XI system.
3. I have executed the T-Code SLDCHECK, and it does not show any error execpt that Business system is missing. I could not create the same as the Technical system is still missing.
4. In T-Code RZ70, I selected all the options, and clicked on activate.
5. I also checked the data in the SLD Data Supplier in the VA of the CRM system, and found all the data to be consistant. I also triggereed the data transfer to the SLD.
Could anyone please help me out in getting the AS ABAP Technical system automatically? Any extra configs I need to do to set this thing right?
Thanks & Regards,
Savan D.
Edited by: Savan Kumar Dundoo on May 19, 2008 7:59 AM

Have you checked [SAP Note 1115244|https://service.sap.com/sap/support/notes/1115244]?
Peter

Technical system creation problem in SLD

hi
while i'm traying to create a technical system for Web As ABAP(ERP 2004 ECC 5.0) in SLD when I serch for Installed product no product with ECC 5.0 is found.
is there somthing missing ?
regards,
kinjal

HI kinjal
i think UR J2EE server patch level is SP9.
do u read the SLD configuration document carefully?
look at sap note 669669. and import the CR Content according to that. this solves ur issue.
regards,
kaushal

Two entries for every technical system for XI in SLD

Hi,
Last weekend we had a patch upgrade in our Production env for SAP PI system.
After that we got the Cache error (Cache notification from Integration Directory failedError when accessing the System Landscape Directory) in RWB -- "Cache Connectivity Test -> IR -> ID -> Adapter Engines".
And
In SLD->Technical Systems->all (Adapter Engine, Integration Directory, Integration Repository, RWB).
e.g.:There are two Adapter Engines:
Adapter Engine on p80.p80xxxxx
and
Adapter Engine on p80.p80xxxxx\p80
Our Basis team contacted SAP for help & SAP has suggested as below.
"We compared the SLD->Technical Systems for QA (Q80) and PROD (P80), and found that for the production box (P80), each XI component is registered Twice.
Now as per the note 764176, we have to delete the entries in the SLD -> Technical Systems. And these will be re-created after a restart.
Could you please let us know whether these have been maintained for any special reason or we can go ahead and delete them."
If you have any idea if those two should be maintained or not, please suggest how to proceed.
Thank you & Best regards,
Farooq.

Hi Farooq,
I have faced the same issue and got resolved by 764176.
you can go ahead and implement the note 764176 which will resolve your issue.
Regards,
naveen

Obligatorytransport target for business system not found in SLD

Dears,
We implemented CTS+ in our PI three system landscape.
While implementation we configured local SLD and after that for dev and QAs we configured a central SLD.
And for Production we have seprate SLD.
In DEV SLD we have three buisness systems:
File_Dummy of type DEv
File_Dummy_Q of type QAS
File_Dummy_P of type PRD
Now in transport target group of File_Dummy I put File_Dummy_Q and in File_Dummy_Q I put File_Dummy_P but for BS File_Dummy_P target group is empty.
Now I put all these BS into a request and import them in QAS then I get error:
Obligatorytransport target for business system File_Dummy_P not found in System Landscape Directory
Now I am not getting what to put in transport target of File_Dummy_P as it is of type.
I tried to put their File_Dummy_P but we can not put PRD type BS there.
I also tried with dev and qas BS there but still same error.
Please suggest how to resolve this error.
Regards,
Shivam

Hi,
did you transported the associated technical systems of your business systems....?
Also I assume you have assoicated the targets foryour business systems in SDL..
like for D targets are Q and P
for Q source is D and Target is P
for P sources are D and Q... if not assoicate the same...
and also make sure the three groups are available for three environments...
HTH
Rajesh

Technical system for Oracle in SLD

Hi All,
I know the steps to create a technical system for a SAPR/3 system in SLD.
Can any one tell me the steps to create a technical system for accessing Oracle Database in SLD.
Thanks in advance,
Bhavyasri.M

Hi Shilpa,
Can u plz provide me the steps in more detail to add the Oracle system in SLD....
Thanks in advance,
Bhavyasri.M.

Technical System not appearing while creating Business System

Hi
We had already created business system and assigned a technical system and all the interfaces was working fine.
Now we removed the technical system and created a new technical system, since we need to point to different server.
I created a new technical system, oped the old business system and in integration tab, when i click on change technical system.
The newly created technical system is not appearing.
Thought of assigning the business system directly in technical system, but it is not allowing and i am getting message business system is already assigned.
Can you pls help
Regards
Madhan D

Hi Madhan,
When you create a Business System, it will ask for the type of Technical system like Web AS ABAP, Web AS Java etc.
So, the new TS type should match the TS type you selected for your BS so that you can see your TS in the dropdown, when you click on "Change" link.
HTH,
GP

Technical Systems Not appearing in Managed Sytem Configuration

Hi Experts,
I am doing Solman_setup after upgrade.I am in Managed system configuration step.I have synchronized Abap and java systems through RZ70 and NWA respectively to Solamn Local SLD and hence they are also appearing in LMDB (technical system tab).However when I am opening Managed System Configuration page no technical system (Abap or Java) is found (except solman Abap and solman Java) technical system tab page (find the screen shot for ur convenience ).Can any one help me out to find the solution.
Thanks
Aditya Roushan

Hi
Please check the Synchronization job between SLD and LMDB is running fine.
Did you finish all the steps(SLD Setup) System Preparation?
If the issue still exist please de actviate the SLD and recreate again
Run the SLD and LMDB Sync job again after the recreation Step: SLD Setup
Kind Regards,
Phaneendra Kakani

No Hosts Found - Technical system not well defined

We are performing Diagnostic configuration for managed system.We are trying to configure solution manager has managed system with ABAP and Java stack.
Though we have defined the Java instances in the following format,system is throwing an error saying No hosts found,Technical system is not well defined - for solution managed Java.
Instance                                                  server role                         server
J2EESERVER_KRESSAPCRM_00     DISPATCHER Dispatcher     kressapcrm
J2EESERVER_KRESSAPCRM_01     SERVER J2EE-Server     kressapcrm
What might me the issue?
Regards
Shailaja

Hi,
All these details are entered in SMSY
Abap stack header data:
Message server : KRESSAPCRM
System Number : 00
Database : SOL
Abap stack Instances data:
Instance : KRESSAPCRM_SOL_00
Server : KRESSAPCRM
Java stack header data:
Message server : KRESSAPCRM
Installation Number : 0020190937
Dispatcher : 2062900
Database : SOL
Java stack Instances data:
Instance : J2EESERVER_KRESSAPCRM_00
Server Role : J2EE server
Server : KRESSAPCRM
Regards
Shailaja

ABAP System not available in SLD?

Hello,
We're having a very strange problem with one of our systems in that it will not register in the SLD. It is a BW 7.0 system and RZ70 and SLDAPICUST are both configured correctly and SLDCHECK shows that everything is working as expected. Yet, when you log onto the SLD, the system simply is not there in the Technical ABAP Systems. But, the Java side is working fine in that it does show up under Technical Java Systems.
Any ideas of what might be happening?
Thanks,
Tom

Just an update. When I try to maually register the system in the SLD, I get an error at the end that says: CIM_ERR_ALREADY_EXISTS... It sounds like it is doing the self registration, but just isn't visible for some reason.
edit - well, it appears that the process of trying to manually register the system, eventhough it failed, tweaked something such that the system is self registering now and everything appears to be normal. not sure what was going on, but things appear OK now.
Message was edited by: Tom Ratrie

Technical Systems Not Reflected in SLD

Similar Messages

Maybe you are looking for