Techniques for changing shots between two different angles
What is a good technique to use to switch between wide angle (v1) and closeup (v2) when building a sequence such as:
1) building a new sequence on v1 from material cut from v1 & v2
2) superimposing and changing the opacity for different clips on the timeline
I am fairly new to FCE and would appreciate some guidance.
Hi(Bonjour)!
Put you main shot on V1 and the close up one on V2. Use razor blade on clip on V2 and the roll tool.
Michel Boissonneault
Similar Messages
-
Swap between two different item categories in sales orders for sub-contracting
Dear gurus,
my requirement is to have the ability to swap between two different item categories for sales orders for sub-contracting.
This should be controlled by a combination of the material and a value maintained the Usage field in the Customer Material Info Record (for example by entering a ‘V’). A combination of Sales Doc Type, Item Cat Group and Usage should result in the creation of a purchase requisition.
In the event that a process order is required instead of a purchase requisition (i.e. the product is to be manufactured in-house instead of sub-contracted) the user must have the ability to change the Item Category within the sales order to produce a process order.
The user would just change the item category within the sales order, and the system would automatically remove the purchase requisition assigned to the SO, and create a process order and assign it to the SO.
Can you suggest any possible solution?
Thank you in advance.Hi Majlo,
In my system, I checked. First created sales order with third party line item and then changed item category to normal item category.
Till Purchase order not created, I can change Item category of my sales order line item.
In this case SAP inform by log and once save delete purchase requisition of that line item .
For this you need to assign another item category as an manual item category in SPRO Item category assignment.
After this user can manually change item category to other one manually, if PO do not exist.
Please let me know if your query is different.
Regards -
How to transfer app data between two different game center accounts?
Hello, I really need some help.
I have looked all over the web for ways to transfer apps between two different game center accounts and different devices. Several weeks ago I started playing Campus Life on my relative's Ipad 2, therefore spending many long hours to get to this point in the game.
The problem is I just got an Iphone 5 and I really would like to transfer the data onto it, so that I would not need to start all over again.
My grandma has an account (Game Center) onto which the data has been saved and I would like to have it stored onto mine. On some forum someone said to sign into the account which has the data on both devices and to then open up the game on the new device. It worked. Then I signed out and logged in with my own account- the game started from scratch. I panicked. I went back on the other account, and the data reappeared. I have been going back and forth, the game changing as many times. I thought it would ask to back up my grandma's data on mine but I was wrong. I can not seem to save the game onto my new account, and I have even tried to back it up to Itunes and then copy it onto my phone after having signed into my own account. And I don't know how to properly use Icloud. I am a mess. I am completely lost and have found no help on the web. (All people seem to have to deal with is sharing Apple IDs with different Game Center Accounts for the kids and transferring apps from one of their devices to another.)
I am so worried I am going to mess up and will lose the whole thing completely.
I have just started another game with my own account but since I am using my grandma's, the data is erased. It's one or the other but I definitely prefer saving Campus Life. I do not like the idea of having to only pick one.
I do not know any technical terms, so if you understand or even have the slightest clue about what I am talking about, I applaud you.
This seems like mission impossible, so if anyone can help in any way, I would be really grateful.
Thanks in advance for your time and thoughts!I meant to press on "This solved my question"... Sorry if you needed the points.
Thank-you and I will just go back and forth between the accounts. -
Use of SAP memory to transfer data between two different sessions.
Hello experts,
I wish to know how to use SAP memory to transfer data between two different sessions.
The scenario is that when I run a report and change a variable, the value of changed variable should be availabe to another user on another terminal.
Thanks & Regards!
SumitHello,
Just to add what Max has already mentioned. IMPORT TO / EXPORT FROM DATABASE statements can be used to store data in special "cluster" tables (you can't use any DDIC table) e.g., INDX.
@OP: You can opt for Shared Memory(SHM) for this specific requirement as well. In my opinion SHM is a bit tricky to code, but it is easier to monitor. The opposite holds true for "data clusters".
You should remember SHM is app-server specific. So if you've a load balancing scenario, using SHM can cause problems.
Hope i'm clear.
BR,
Suhas
Edited by: Suhas Saha on Nov 19, 2010 4:12 PM -
I am looking for the best way (or any way) to interact between two different frames in the same indesign template as well as from one template to another. It's for a DPS app which needs to carry some button initiated data from one page to another and then present it in a table.
There is no simple way to do it, as itunes wont let you use it on another computer without wiping the contents first.
However if you really want to transfer songs to another computer then you could try this;
* make sure that your ipod is accessible as a disk drive (ipod options)
* when you plug your ipod into the computer you want to transfer to make sure you select "no" or "cancel" when it asks to wipe the contents. Leave the ipod connected and quit from itunes.
* go to "my computer" and access the ipod directly. You probably have to select "view hidden files" from windows. You will see a lot of folders with odd names like ZX838aff with similar named files inside.
* copy these files to a folder on your computers hardrive. Now remove the ipod and start itunes.
* import the files from the folder you made in the last step.
* Now your music is on itunes, but with unrecogisable names.
This is the only way I have found to do it, but there may be another way, say with an application to do the hard work for you.
Generic homebuild PC Windows XP
Generic homebuild PC Windows XP -
iTunes no longer works properly (aka at all) while using one of the user accounts set up on my iMac. It does, however, work when logging in under another user account on the same iMac. (if any of you can help me solve this issue that would be perfect). If there is no solution can anyone help with my request to share an iTunes library between two different accounts on one Mac. How do I do this?
jc_hering wrote:
that works for anything he purchases after he creates the new account. What about his current music that currently resides in my itunes library? How can I get his current music out of my library into his new account/library?? Thanks..
Copy it to his computer into his iTunes library and authorize his computer with the iTunes account used to purchase them..
You cannot tranfser items from one iTunes account to another. Purchased items remain part of the iTunes account is was purchased with.
iTunes account - used to purchase items
iTunes library - where purchases (and CD RIPs) go on the computer -
How can i use eyedropper between two different art board.
Hi
How can i apply the same color for the images in two different art boards with eyedropper.
I am trying to apply the same color from the image in one art board to another image in another art board.
Can any one help me please. Thanks
Steve
I am using Macapresslink,
Presuming you are unable to use the Eyedropper Tool normally, in other words keep the target object selected while you pick up the colour, by having the Artboards open in adjacent windows to ClickDrag between (I am still with 10 which may explain at least part of my ignorance for which I apologize):
Until someone presents a smarter solution, you may cheat and create a carrier object beside the source object, drop the colour in that, cut and paste it to be beside the target object, and drop the colour there. With multiple colours to drop multiple times, you may create a palette to hold them, to use just like a painter working on several canvases at the same time. Or you could paste diminshed copies of the source objects. -
Authentication needed after doing trust between two different domains.
Hi There,
I have a problem when i did the trust relationship between two different domains in two different forests ,,in the trust relationship steps all working two ways trust,with external trust,stub zone created on both domains and they are validated in both sides
,,my problem is with the objects it can't be retrieved from side and it can be from the other side . For instance :
NY domain can get the users and computers of 2012DC1
but 2012DC1 can't get the users and computers of NY
Date and time are the same,i am always getting this error
The session setup from computer '2012DC1' failed because the security database does not contain a trust account 'test.com.' referenced by the specified computer.
USER ACTION
If this is the first occurrence of this event for the specified computer and account, this may be a transient issue that doesn't require any action at this time. If this is a Read-Only Domain Controller and 'test.com.' is a legitimate machine account
for the computer '2012DC1' then '2012DC1' should be marked cacheable for this location if appropriate or otherwise ensure connectivity to a domain controller capable of servicing the request (for example a writable domain controller). Otherwise,
the following steps may be taken to resolve this problem:
If 'test.com.' is a legitimate machine account for the computer '2012DC1', then '2012DC1' should be rejoined to the domain.
If 'test.com.' is a legitimate interdomain trust account, then the trust should be recreated.
Otherwise, assuming that 'test.com.' is not a legitimate account, the following action should be taken on '2012DC1':
If '2012DC1' is a Domain Controller, then the trust associated with 'test.com.' should be deleted.
If '2012DC1' is not a Domain Controller, it should be disjoined from the domain.
Can you please help me in this error.
Thank You in advance.Hello,
"The session setup from computer '2012DC1' failed because the security database does not contain a trust account 'test.com.' referenced by the specified computer. "
This belongs to the machine 2012Dc1 in test.com and not to the other domain from your trust. Seems for me that you mix the trust with the problems of the machine 2012DC1 in test.com.
In this error message 2012DC1 has lost the trust to its OWN domain and therefore you have to find the reason. How exactly was this machine installed?
Or was there a restore on that machine from not supported type of backup like image/clone/snapshot?
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter: -
How do I Sync my itunes music between two different computers
Can anyone tell me the step-by-step instructions for how to Sync my itunes music between two different computer.... one Mac at work and a second at home. I want to bring over all my work music onto my home Mac, some of which is the same but much of it is different.
Are you able to connect the two computers in any way? For instance is the work computer a laptop that you can bring home and network with your personal one? If the two devices are connected in some away there are a few utilities that can help you sync iTunes across different computers. You could begin your research by having a look at these for instance:
TuneRanger
SuperSync
syncOtunes -
Outbound Delivery created between two different Storage Bins
Dear Guru ,
Using WM can I create an SD Outbound Delivery between two different storage bins linked to the same storage location ?
ThanksHi,
Between storage bins only transfer posting is possible as per my understanding. -
How to route traffic between two different interfaces
Hi,
I need to setup a routing between two different interfaces on a host.
Inferface ce1 : 192.168.120.12
Inteface ce2 : 192.168.110.50
Is it possible to add a route which enables the ce2 interface to catch packets from the ce1 interface ?
Regards,
ArminThe problem is a application which is only able to listen on one interface.
To fix this, I have to make all packages visible on one interface. -
Wireless application for files exchange between two computers,pls Help
Hi everyone,
I need your help,pls.I have to make a wireless application for files exchange between two computers,but I don't know where to start from.I guess that this should be a client/server and after establishing a connection I have to be able to exchange files between each others.Please help methe wireless connection does not matter.
This is a socket (client server as you said) same way.
look out:
http://java.sun.com/docs/books/tutorial/networking/index.html
cya -
HT204053 Is it possible to sync calendars between two different users?
Is it possible to sync calendars between two different users?
Hi
Installing the drive into the older machine may work, you WILL get a lot of driver errors and the unit may even fail to boot. The other problem is that the drives may not be compatable, the drive in the broken PC is a SATA drive, older PCs had IDE drives with very different connectors.
Your best option is to do as you suggest and obtain a USB caddy and extract the data that way.
Make sure that the caddy you get will support SATA drives (all new ones will).
Although I am an HP Employee, all views expressed are my own and are not on behalf of HP
Regards
Ty
**Click Accept as Solution on a Reply that solves your issue to help others who are searching** -
How to use 'UNION' between two different databaseservers
Hello,
Could someone help me out. I am trying to find out if and how to use 'UNION' between two different databaseservers.
We have 2 different queries, each queries on a different database; one MySQL the other MSSQL.
Could someone tell me how to use 'UNION' between thes 2 queries?
Thanks in advance,
Samir BenallaHello
You may use openrowset statement, (OPENROWSET (Transact-SQL))., but before you use this, you must configure your server
sample:
SELECT a.*
FROM OPENROWSET('SQLNCLI', 'Server=Seattle1;Trusted_Connection=yes;',
'SELECT GroupName, Name, DepartmentID
FROM AdventureWorks2012.HumanResources.Department
ORDER BY GroupName, Name') AS a
UNION
SELECT GroupName, Name, DepartmentID
FROM AdventureWorks2012.HumanResources.Department
ORDER BY GroupName, Name
With this you can define a connection using native client to server Seattle1, and execute a query there, The results will be spooled on your server.
Connectionstring
Server=[SERVER_NAME];datasource=[YOUR DATABASE NAME];user_id=sa;password=sapassword'
if you use FQDN on your Query, than the datasource parameter in connection string can be letf out.
Regards
János.
take care of performance, it can be very slow, -
Better approach for checking column values between two different rows
My requirement is to find best Approach to find difference between column values of two different rows.Below I've mentioned two different
approaches I'm thinking of,but I'd like to know is there any other better approach.
version details
SQL> SELECT *
2 FROM V$VERSION;
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for Solaris: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - ProductionTable creation script
CREATE TABLE R_DUMMY
(CA_ID VARCHAR2(16) NOT NULL ENABLE,
CA_VER_NUM NUMBER(4,2) NOT NULL ENABLE,
BRWR_SHORT_NAME VARCHAR2(25 CHAR),
sic_code number,
FAC_ID VARCHAR2(10) NOT NULL ENABLE
/ insert script
insert into r_dummy (CA_ID, CA_VER_NUM, BRWR_SHORT_NAME, sic_code, FAC_ID)
values ('CA2001/11/0002', 2.00, 'Nandu',1234, 'FA000008');
insert into r_dummy (CA_ID, CA_VER_NUM, BRWR_SHORT_NAME, sic_code, FAC_ID)
values ('CA2001/11/0002', 3.00, 'SHIJU',456, 'FA000008');Desired O/P :
ca_id fac_id column_name previous name after_modification
CA2001/11/0002 FA000008 BRWR_SHORT_NAME Nandu SHIJU
CA2001/11/0002 FA000008 sic_code 1234 456My approach
select ca_id,fac_id,column_name,
decode(column_name,'BRWR_SHORT_NAME',lg_brwr,lg_sic) previous_name ,
decode(column_name,'BRWR_SHORT_NAME',ld_brwr,ld_sic) after_modification
from
select
case
when ld_brwr != lg_brwr then
'BRWR_SHORT_NAME'
when ld_brwr != lg_brwr then
'sic_code'
end
) column_name,ca_id,fac_id,lg_brwr,ld_brwr,ld_sic,lg_sic
from (
select ca_id,fac_id,lag_brwr,ld_brwr,ld_sic,lag_sic
from
Select lead(brwr_short_name,1) over(partition by ca_id,fac_id) ld_brwr,
lag(brwr_short_name,1) over(partition by ca_id,fac_id) lg_brwr,
lead(sic_code,1) over(partition by ca_id,fac_id) ld_sic,
lag(sic_code,1) over(partition by ca_id,fac_id) lg_sic,
ca_id,fac_id
from r_dummy
where (ld_brwr != lg_brwr or ld_sic != lg_sic)
)2nd Approach :
=============
select ca_id,fac_id,column_name,
decode(column_name,'BRWR_SHORT_NAME',lg_brwr,lg_sic) previous_name ,
decode(column_name,'BRWR_SHORT_NAME',ld_brwr,ld_sic) after_modification
from
select
case
when ld_brwr != lg_brwr then
'BRWR_SHORT_NAME'
when ld_brwr != lg_brwr then
'sic_code'
end
) column_name,ca_id,fac_id,lg_brwr,ld_brwr,ld_sic,lg_sic
from (
select ca_id,fac_id,brwr_short_name,sic_code
from
Select ca_id,fac_id,brwr_short_name lg_brwr,sic_code lg_sic
from r_dummy
where ca_ver_num = '2.00'
)o,(
Select ca_id,fac_id,brwr_short_name ld_brwr,sic_code ld_sic
from r_dummy
where ca_ver_num = '3.00'
)n
where 0.ca_id = n.ca_id
and 0.fac_id = n.fac_id
and (ld_brwr != lg_brwr or ld_sic != lg_sic)
)Hi Experts,
I've provided sample data where I'm checking for just two columns viz brwr_short_name ,sic_code,but in real time
I've to check for 8 more columns so please suggest me with a better approach.
I appreciate your precious suggestions.Hi,
Thanks for posting the CREATE TABLE and INSERT statements; that really helps!
Here's one wa. Like your 2nd approach, this uses a self-join:
WITH got_r_num AS
SELECT ca_id
, ROW_NUMBER () OVER ( PARTITION BY ca_id
, fac_id
ORDER BY ca_ver_num
) AS r_num
, brwr_short_name
, TO_CHAR (sic_code) AS sic_code
, fac_id
-- , ... -- Other columns (using TO_CHAR if needed)
FROM r_dummy
, unpivoted_data AS
SELECT *
FROM got_r_num
UNPIVOT INCLUDE NULLS
( txt
FOR column_name IN ( brwr_short_name AS 'BRWR_SHORT_NAME'
, sic_code AS 'SIC_CODE'
-- , ... -- Other columns
SELECT p.ca_id
, p.fac_id
, p.column_name
, p.txt AS previous_name
, a.txt AS after_modification
FROM unpivoted_data p
JOIN unpivoted_data a ON p.ca_id = a.ca_id
AND p.fac_id = a.fac_id
AND p.column_name = a.column_name
AND p.r_num = a.r_num - 1
AND p.txt || 'X' != a.txt || 'X'
ORDER BY a.r_num
;To include other columns, add them in the 2 places where I put the comment "Other columns".
Ca_ver_num can have any values, not just 2.00 and 3.00.
This will show cases where a value in one of the columns changed to NULL, or where NULL changed to a value.
There ought to be a way to do this without a separate sub-query like got_r_num. According to the SQL Language manual, you can put expressions in the UPIVOT ... IN list, but when I tried
... UNPIVOT INCLUDE NULLS
( txt
FOR column_name IN ( brwr_short_name AS 'BRWR_SHORT_NAME'
, TO_CHAR (sic_code) AS 'SIC_CODE'
)I got the error "ORA_00917: missing comma" right after TO_CHAR. Perhaps someone else can show how to eliminate one of the sub-queries.
Maybe you are looking for
-
What is up with the Help and Support Section for Business Catalyst?
It has been very difficult for my customers and myself to access the help and support section of the site for Business Catalyst issues as we are constantly diverted to non-related Abode issues. The portal for support on Business Catalyst issue needs
-
Problem in Miro number range assignment
Dear Gurus, Iam facing the problem in MIRO generation i have to assign no ranges for miro please assist me how can i assign the miro numberranges. Regards Hari kumar
-
Trying to insert flash video onto website
I'm using Dreamweaver and have been trying to embed a flash video onto my web page. I have inserted the proper file, but I think I need to reference the start.exe file to get the movie to play. Any help? This is the code so far: <object classid="clsi
-
Bookmarks are not automatically creating based on Word 2013 Table of Contents.
Bookmarks are not automatically creating based on Word 2013 Table of Contents. In older version of Word, the Style built Table of Contents converted into Bookmarks when PDFing.
-
When I try to use Ni Spy I receive the error: The procedure entry point _StopSpying@0 coule not be located in the dynamic link library NiSpyLog.dll Ni VISA 4.0 Ni Spy 2.0.0.16 Windows 2000