Techonology assesment on EHP3 E- Recruitment for Recruiter Role

Hi Folks,
I was wondering if some one can help me.
1.The current role for Recruiteris based on BSP in ECC6.0 . With EHP3 are there any changes to role . ie is this role moved Dynpro and if so is it Java dynpro or abap dynpro?
2. In case both technologies co exist , can developments be carried out both in BSP and Dynpro at the same time?
3. Have
Regards,
Manbir

hi
With EHP 3 Recruiter role is still in BSP Technology , EHP 4 onwards recruiter role is coming on WD ABAP there are slightly changes has come with EHP 3 in Recruiter role like
1. Changes in Requisition Process.
Here customers can hide the "Positions", "Organizational Unit and Job", and "Account Assignment" tabstrips in the"Organizational Dat container item through flexibilization customizing.
2.Check Duplicate Candidateis
Feature introduces a BusinessAddIn (BAdI) that allows companies to define which criteria they wish to use to determine whether a candidate has a duplicate application in the database. This check is only performed on non-registered external candidates. The fallback mechanism to check for duplicates is first name, last name, and e-mail address.
3. dashbord for Recruiter.
This function introduces a new dashboard for managers and recruiters. The dashboard shows new questionnaires that still need to be completed or questionnaires that have already been completed. The user can complete questionnaires directly from the dashboard itself.
and with EHP4 onwards all services in E-Recruitment will be on WD ABAP.
Regards,
Maadhu

Similar Messages

Requisition for approval using - Restricted Recruiter role

Hi,
We have implemented SAP eRec EHP4. As of EHP3 the restricted recruiter was only able to create requesition in Draft mode and release the requisition for approval.
We are using WD on SAP EHP4. We have provided SAP_RCF_RES_RECRUITER_ERC_CI_2 role in R3 to one of the user and Recruiter role on the portal. But when I try to create a requisition and try to release it, it gets released instead of going for approval......
What have we done wrong.....Is there some other way by which the requisition can be sent for approval in EHP4......
Thanks

Hi All,
In the meantime I was testing the BSP application since I had to give a demo to the client.....Here I could run the workflow, but when I launch the recruiter "approval" page it gives me an error
BSP Exception: Das Objekt default.htm in der URL /sap/bc/bsp/sap/hrrcf_approval/default.htm?objid=90005527&otype=NB&plvar=01&requestdate=20100723&requestedRsncode=01&requestedstatus=1&requester=Mr%2etesttest&SAPWFCBURL=http%3a%2f%2ftcssol%2ehrservicesonline%2ecom%3a8002%2fsap%2fbc%2fwebflow%2fwshandle ist nicht gültig.
I saw through SE80 there is no page like default.htm how do I resolve this, is this also connected with upgrading our SP level?
Thanks
Subbu

Error while accesing requisition from recruiter role in portal

Dear Experts ,
When we are trying to access *requisition in recruiter role in portal it is showing you are not authorized to perform this applcation. Can you pleae suggest me what will be the problem.
For clarity we are having EHP4 , and the portal nw7.1 , we have assigned SAP _ALL to the user we are testing and in portal we had assigned super admin , recruiter , recrutiment administrator.
Quick reply is highly appreciable.
Thanks & Regards,
Ravi

Dear Bala ,
Thanks for your support the erro got resolved actually the candidate has not been maintained , after doing that in weekend it got resolved.
Thanks
Ravi vemuri.

Recruiter Role 1.40: Missing Services Tray & Service Map in EP

Hi everyone
we're implementing SAP E-Recrruiting EHP 4 (SP04). We did some basic customizing in backend and installed Recruiter 1.40 and Recruiting Administrator 1.40 BPs on portal side.
After assigning portal roles to users, on first sight everything looks OK. But compared to other installation, there is no Service Map and no Services tray on the left side of recruiter role. Service map iView is also missing in portal content of the role.
The "create requisition" button in the Dashboard leads to error "iView not found".
Calling the preview for "create requisition" from portal content works as it should.
I created a service map iView manually and attached it to the recruiter role. Now I'm able to use all the functions in there w/o any problems! Created requisitions are shown in Dashboard for example.
SLG1 is (just) logging errors resulting from attempted searches in the Recruiter Dashboard. As TREX customizing isn't done, one can expect this to happen.
What are we missing? Is there some basic setup missing on portal side we forgot about?
Thanks for any advice!

Hi Sanjay
Did you find a solution for your problem?
regards
Murat

Can't find registered ext. candidate from recruiter role in E-recruiting

Hi experts,
In E-recruiting, I register as external candidate, after maintaining profile and send an application for job posting.
When I log on as recruiter role, want to find the appliction to use "candidate overview" and "application", but i failed.
Could you give any hints about the issue ?
Thanks a lot.
Yoga.

Hello Yoga,
You should open the Recruiter Dashboard on WD version, WD: ERC_A_WORKCENTER.
On BSP version you have the BSP hrrcf_recruiter. From there you have all the information.
Let me know if this is what you are looking for.
Regards,
Bentow.

Failed to create machine self-signed certificate for site role [SMS_SQL_SERVER]

SCCM 2012 has been successfully installed on the server:
SRVSCCM.
The database is on SQL Server 2008 R2 SP1 CU6 Failover Cluster (CLS-SQL4\MSSQLSERVER04)
Cluster nodes: SQL01 and SQL01. On all nodes made necessary the Security Setup of SCCM. No errors and warning on SCCM Monitoring.
The cluster service is running on the account: sqlclusteruser
The account has the appropriate SPN are registered:
setspn -L domain\sqlclusteruser
Registered ServicePrincipalNames for CN=SQL Cluster,OU=SQL,OU=Users special,OU=MAIN,DC=domain,DC=local:
MSSQLSvc/CLS-SQL4
MSSQLSvc/CLS-SQL4.domain.local
MSSQLSvc/CLS-SQL4:11434
MSSQLSvc/CLS-SQL4.domain.local:11434
After some time on the cluster hosts every day started appearing new folders with files inside:
srvboot.exe
srvboot.ini
srvboot.log
srvboot.log contains the following information:
SMS_SERVER_BOOTSTRAP_SRVSCCM.domain.local_SMS_SQL_SERVER started.
Microsoft System Center 2012 Configuration Manager v5.00 (Build 7711)
Copyright (C) 2011 Microsoft Corp.
Command line: "SMS_SERVER_BOOTSTRAP_SRVSCCM.domain.local_SMS_SQL_SERVER CAS K:\SMS_SRVSCCM.domain.local_SMS_SQL_SERVER8 /importcertificate SOFTWARE\MicrosoftCertBootStrap\ SMS_SQL_SERVER".
Set current directory to K:\SMS_SRVSCCM.domain.local_SMS_SQL_SERVER8.
Site server: SRVSCCM.domain.local_SMS_SQL_SERVER.
Importing machine self-signed certificate for site role [SMS_SQL_SERVER] on Server [SQL01]...
Failed to retrieve SQL Server service account.
Bootstrap operation failed: Failed to create machine self-signed certificate for site role [SMS_SQL_SERVER].
Disconnecting from Site Server.
SMS_SERVER_BOOTSTRAP_SRVSCCM.domain.local_SMS_SQL_SERVER stopped.

The site server is trying to install the sms_backup agent on the SQL Server Cluster nodes.
Without successfull bootstrap the siteserver backup is not able to run successfully.
Try grant everyone the read permisson on
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS on the SQL server nodes.
This worked for me.
After that a Folder named "SMS_<SITESERVER-FQDN>" appeared on C: on the SQL Cluster nodes, and a "SMS_SITE_SQL_BACKUP_FQDN" Service should be installed.
After the new Folder is created and the new Service is installed, you can safely remove the bootstrap Service by opening a command prompt and enter:
sc delete "SMS_SERVER_BOOTSTRAP_FQDN-of-SiteServer_SMS_SQL_SERVER"

Link is not working for one role. how to check please guide.

Hi Expert,
I have a simple question but as don;t aware of some of the techincal area not able to understand where to check.
I have a link under document flow in offer( opportunity) where for one role sales support user the link is not happening. I have checked for other role its working fine.I understand that for this role the link will not work as per the role maintianed.
But where this link got maintained and how i will be able to check which link is tagged to which profile.
rolewise mappeing with link.
Please guide.
Prem.

Hello Prem,
Please check the navigation bar profile from your business role.
Then go to the navigation bar profile settings, you can find the details settings there.
If it is a link under some work center, you need to start from the work center.
If it is a direct link, then start from the derect link group.
Hope this could be helpful.
Best regards,
'Maggie

Account Creation - Badi for Default values for BP Role and Sales Area

Hi all,
my requirement regards the possibility to create a new prospect (a link should be available in the navigation bar or create section).
Logically, a bp role as "Prospect" and particoular sales area should be created automatically.
I created an implementation for the BADI definition "BADI_CRM_BP_UIU_DEFAULTS". But don't know how to create the default values for BP role and Sales area:
In my code
assign cr_me->('VIEW') to <lv_view_name>.
if sy-subrc ne 0.
exit.
endif.
lv_viewname = <lv_view_name>.
case lv_viewname.
when 'AccountDetails.htm'.
I obtain the viewname "AccountDetails" , the related context "Header". After I don't know how to proceed to obtain the related entities through the relationship BuilRolesRel and BuilSalesArrangementRel.
Am I following the right way? Is there another solution to prepare the output for default values?
Any kind of suggestion will be appreciated.
Regards, Roberto

go to spro>cross-application components>sap busines partner>business partner> basic settings>field groupings>Configure Field Attributes per BP Role
Double click the business role which you want to customaze (e.g. 'A') and change the proper settings.
Regards.

Problem creating Network ACL for a ROLE in Oracle 11gR2

According to Oracle Documentation when you create a new Network ACL you can add privileges to a user or role. I need to create a new ACL for the UTL_SMTP package for a specific role, but when I granted it the users who have that role are still getting the "ORA-24247: network access denied by access control list (ACL)" error when they try to send an email. If I grant the ACL privilege to the same users directly it works fine. Is there any step I'm missing? This is the test I have made on my Solaris 10 - Oracle 11gR2 (11.2.0.3) Standard Edition server:
SQL*Plus: Release 11.2.0.1.0 Production on Wed Aug 21 09:31:52 2013
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL> CONNECT system/******@testdb
Connected.
SQL> SET LINES 1000
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE    11.2.0.3.0      Production
TNS for Solaris: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
SQL> COLUMN host FORMAT A20
SQL> COLUMN lower_port FORMAT 99999
SQL> COLUMN upper_port FORMAT 99999
SQL> COLUMN acl FORMAT A40
SQL> COLUMN acl FORMAT A40
SQL> COLUMN principal FORMAT A15
SQL> COLUMN privilege FORMAT A10
SQL> COLUMN is_grant FORMAT A8
SQL> COLUMN status FORMAT A10
SQL> SELECT host, lower_port, upper_port, acl FROM dba_network_acls;
no rows selected
SQL> SELECT acl,principal,privilege,is_grant FROM dba_network_acl_privileges;
no rows selected
SQL> CREATE USER testacl IDENTIFIED BY testacl;
User created.
SQL> GRANT CONNECT TO testacl;
Grant succeeded.
SQL>
SQL> BEGIN
2     dbms_network_acl_admin.create_acl('test_smtp.xml','TEST SMTP ACL','TESTACL',true,'connect');
3     dbms_network_acl_admin.assign_acl('test_smtp.xml','localhost',25);
4     commit;
5 END;
6 /
PL/SQL procedure successfully completed.
SQL> SELECT host, lower_port, upper_port, acl FROM dba_network_acls;
HOST                 LOWER_PORT UPPER_PORT ACL
localhost                    25         25 /sys/acls/test_smtp.xml
SQL> SELECT acl,principal,privilege,is_grant FROM dba_network_acl_privileges;
ACL                                      PRINCIPAL       PRIVILEGE IS_GRANT
/sys/acls/test_smtp.xml                  TESTACL         connect    true
After creating this ACL I test it like this:
SQL> CONNECT testacl/testacl@testdb
Connected.
SQL> SELECT host, lower_port, upper_port, privilege, status FROM user_network_acl_privileges;
HOST                 LOWER_PORT UPPER_PORT PRIVILEGE STATUS
localhost                    25         25 connect    GRANTED
SQL> DECLARE
2     c utl_smtp.connection;
3 BEGIN
4     c := utl_smtp.open_connection('localhost', 25); -- SMTP on port 25
5     utl_smtp.helo(c, 'localhost');
6     utl_smtp.mail(c, 'Oracle11.2');
7     utl_smtp.rcpt(c, '[email protected]');
8     utl_smtp.data(c,'From: Oracle'||utl_tcp.crlf||'To: [email protected]'||utl_tcp.crlf||'Subject: UTL_SMTP TEST'||utl_tcp.crlf||'');
9     utl_smtp.quit(c);
10 END;
11 /
PL/SQL procedure successfully completed.
SQL>
This works fine and I receive the email correctly. Now if I try to do the same thing for a role:
SQL> CONNECT system/******@testdb
Connected.
SQL> BEGIN
2     dbms_network_acl_admin.drop_acl('test_smtp.xml');
3     commit;
4 END;
5 /
PL/SQL procedure successfully completed.
SQL> SELECT host, lower_port, upper_port, acl FROM dba_network_acls;
no rows selected
SQL> CREATE ROLE testacl_role;
Role created.
SQL> GRANT testacl_role TO testacl;
Grant succeeded.
SQL> ALTER USER testacl DEFAULT ROLE ALL;
User altered.
SQL>
SQL> BEGIN
2     dbms_network_acl_admin.create_acl('test_smtp.xml','TEST SMTP ACL','TESTACL_ROLE',true,'connect');
3     dbms_network_acl_admin.assign_acl('test_smtp.xml','localhost',25);
4     commit;
5 END;
6 /
PL/SQL procedure successfully completed.
SQL> SELECT host, lower_port, upper_port, acl FROM dba_network_acls;
HOST                 LOWER_PORT UPPER_PORT ACL
localhost                    25         25 /sys/acls/test_smtp.xml
SQL> SELECT acl,principal,privilege,is_grant FROM dba_network_acl_privileges;
ACL                                      PRINCIPAL       PRIVILEGE IS_GRANT
/sys/acls/test_smtp.xml                  TESTACL_ROLE    connect    true
SQL>
And now I test it again with the same user:
SQL> CONNECT testacl/testacl@testdb
Connected.
SQL>
SQL> SELECT host, lower_port, upper_port, privilege, status FROM user_network_acl_privileges;
no rows selected
SQL> DECLARE
2     c utl_smtp.connection;
3 BEGIN
4     c := utl_smtp.open_connection('localhost', 25); -- SMTP on port 25
5     utl_smtp.helo(c, 'localhost');
6     utl_smtp.mail(c, 'Oracle11.2');
7     utl_smtp.rcpt(c, '[email protected]');
8     utl_smtp.data(c,'From: Oracle'||utl_tcp.crlf||'To: [email protected]'||utl_tcp.crlf||'Subject: UTL_SMTP TEST'||utl_tcp.crlf||'');
9     utl_smtp.quit(c);
10 END;
11 /
DECLARE
ERROR at line 1:
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at "SYS.UTL_TCP", line 17
ORA-06512: at "SYS.UTL_TCP", line 267
ORA-06512: at "SYS.UTL_SMTP", line 161
ORA-06512: at "SYS.UTL_SMTP", line 197
ORA-06512: at line 4
SQL>
I'm aware that role privileges doesn't apply inside procedures, functions or packages by default, but this is an anonymous block so it should use the active roles for the user. I also tried adding a "dbms_session.set_role('TESTACL_ROLE');" at the beggining of the anonymous PL/SQL block but I got the same access error.
Thanks in advance for any help you can give to me on this question, it would be very hard to grant the ACL to all the individual users as they are more than 1000, and we create more regularly.

Thanks for your quick reply... I don't have a problem creating the basic ACL with the privileges granted for a user. The problem appears when I try to create an ACL with privileges for a ROLE. You can see here http://docs.oracle.com/cd/E11882_01/appdev.112/e25788/d_networkacl_adm.htm#BABIGEGG than the official Oracle documentation states that you can assign the ACL principal to be a user or role:
Parameter
Description
acl
Name of the ACL. Relative path will be relative to "/sys/acls".
description
Description attribute in the ACL
principal
Principal (database user or role) to whom the privilege is granted or denied. Case sensitive.
My issue is that when I try to create the ACL for a role it doesn't work.
Have you ever created an ACL for a role? if so please send me an example or let me know which step I might be missing. Cheers.

How to track the transport request number for the Role/Composit Role

Hi,
How to track the transport request number for the Role/Composit Role.
Thanks,
Ravi

Use transaction SE03 Transport Organizer Tools
Execute "Search for Objects in Requests/Tasks" with objects of types:
R3TR ACGR Role
R3TR ACGT Role - User assignment
Regards

On the web how can I check the user role to display the form suitable for this role i

Hello
How can I check on the web the use role to display the a form for each role
Example
If the admin login I display admin_form.fmb and if user login I display
user_form.fmb
Thankx
Tamer

In my forms I hide tab pages according the role using something like the following script in the WHEN_NEW_FORM_INSTANCE trigger.
So the user can not navigate to tabs which are vorbiden by his role.
CURSOR users_roles_cur IS SELECT granted_role FROM user_role_privs
WHERE username=(SELECT user FROM dual);
user_roles_rec users_roles_cur%ROWTYPE;
IF users_roles_cur%ISOPEN
THEN
CLOSE users_roles_cur;
END IF;
OPEN users_roles_cur;
LOOP
FETCH users_roles_cur INTO user_roles_rec;
EXIT WHEN users_roles_cur%NOTFOUND;
MESSAGE (user_roles_rec.granted_role);
PAUSE;
IF RTRIM(user_roles_rec.granted_role,' ') = 'BLA-BLA'
THEN
tb_pg_id := FIND_TAB_PAGE('activity');
IF GET_TAB_PAGE_PROPERTY(tb_pg_id, visible) = 'FALSE' THEN
SET_TAB_PAGE_PROPERTY(tb_pg_id, visible, property_true);
END IF;
END IF;
END LOOP;
CLOSE users_roles_cur;
Other solution may be is to use an initial form which only will detect the user role and run the appropriate form.
Other solutions are also possible.
Joseph

Workflow Notifications not sending for AdHoc Role

Hi,
I am trying to send my workflow to multiple dynamic users, using the call createAdHocRole.
Here is my code (I currently am using 2 user names for testing. This will be eventually be a variable) :
+-- create role --+
apps.wf_directory.createAdHocRole(v_role_name -- role name
+, v_role_name -- role display name+
+, null -- language+
+, null -- territory+
+, null -- role description+
+, null -- notification preference+
+, 'JEHANSEN,DCDRIGGS' -- role users+
+, null -- email addresses+
+, null -- fax+
+, 'ACTIVE' -- status+
+, trunc(sysdate) + C_PURGE);+
When I run the workflow, it runs with no errors, but I am not receiving any emails. I can view the workflow in the Status Monitor and I see the Notification being created and it shows my new role as the performer. Both usernames that I am using for the Role Users are setup as Users and Employees in the environment.
I've queried the WF_USER_ROLES_ASSIGNMENTS table and I see my new role there, and both usernames are in the table. Both users are also in WF_USERS with email addresses, and also in WF_LOCAL_USER_ROLES. When I query WF_NOTIFICATIONS, I see the notification being created there, with a status of OPEN, receipient_role being my new role, mail_Status is blank, responder is blank, original_recipient is my new role, from_user is the supplier, and to_user is my role name .
Can anyone see what I am missing? I thought if I create the role with a null email_address it then sends email to all users in that role? It probably doesn't matter, but these are being submitted upon the change of a PO in iSupplier (Oracle Apps).
Thanks,
Janel

Hi,
Once you have created the role, they can be referenced in your Workflow process in the same way as an other role. For example, create an ad-hoc role "MYTEST123" using the standard WF_DIRECTORY API. Then you can use this as the notification recipient in your process.
If you are creating the roles dynamically within a process, then once the role has been created, set an item attribute (e.g. attribute NTF_RECIPIENT) to the name of the new adhoc role, and then have the notification recipient set to the value of the item attribute.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Function Module not working for old Role

Dears
Function Module not working for old Role
Function Module: /VIRSA/BAPI_AE_USERS_FOR_ROLES
Before EHP4 upgrade this functional module working fine, but after updated users are not visible.
We have chekced if the users are assigned directly users are visible but indirect (Position Based) assignment users are not apprearing.
Pl check the fucntion module with given roles below and identify the root cause,
EP_TRVL_ALL_CAB - Old Role
EP_TRN_TRVL_DRGC_V2 - New Role
Regards
Krishna Mohan CH
9704500717

Krishna,
I do not think this BAPI is meant to be called by anyone but the application using it, and its functionality may therefore change without notice.
What are you trying to achieve? Maybe there's a better way to do that...
Frank.

Search for user role but help poppup display

Anyone ever trying to search for user role from search action bar or user admin page?
Whenever select role and clicked on the magnifying glass icon, help content displays instead of role selection.
At first I think this is a bug. But when I asked Customer Care they said its an expected behaviour which means that this is how the engineers designed it.
Dont you feel weird? because other field like status, correctly displays status info after clicking the icon.
Hope u can try it this out and give your opinion here.

Can you provide a little more detail on what you were trying to do.

Customizing display profile for a role ends with a blank portal

I have a custom TabContainerProvider with 4 tabs (containers with two channels). I need one of them to be visible only to a specific role. So I created a role (static), assigned this role to users, and in portal console with the role selected I've put the 4th container with its two channels to the TabContainerProvider. When I log in as a user with the role, I see "The desktop you are using is not yet configured with any channel in it. To get started with deploying sample content, see below."
When I do the same, but with the users selected (so I enable the container with its channels to all of the users with the role but not for the role itself), it works.
What can be wrong? Where should I look for hints?

Please make sure the Parent Container for the role is set correctly. When you create a new role, the Parent Container will be set to DefaultChannel by default. To verify this,
1. launch the portal admin console, i.e. http://host/psconsole
2. goto portals --> portalID --> specify your role for the Select DN drop down
3. verify that the Parent Container setting for the role is not DefaultChannel, instead it should be set to the Parent Container used by your portal.
Hope this helps. dean.

Techonology assesment on EHP3 E- Recruitment for Recruiter Role

Similar Messages

Maybe you are looking for