Techtool deluxe found 7 errors during surface scan... what do i do???

please help

The steps mentioned by TTD aren't very thorough, especially for a rookie. I only have 1 error and the suggestion by TTD is:
Surface Scan
Failed - 1 errors
The Surface Scan test will scan the disk for bad blocks.
Media defects cause this test to fail. You should consider backing up the device, reformatting the media, replacing the data, and then testing again.
Can you please walk me through these steps? I have my computer backed up using Time Machine and I still have the box that I bought to upgrade my operating system to Snowleopard.

Similar Messages

BUG 2.1 - ARW (Sony Raw) no photos found error during Auto Import

BUG 2.1 - ARW (Sony Raw) no photos found error during Auto Import
I've seen this issue since beta1. The issue seems to be related to a camera setting that stores the files in folders by date. The Folder structure becomes drive>DCMI>10202008>image.ARW
This "no photos found error" I have seen in beta1 LR1 LR1.1 LR1.2 LR1.3 LR1.4 and LR2.0 this is still an issue in LR2.1
Auto import works fine with canon or nikon RAW files (I've used several different cameras with no problems)
The Folder structure for canon files is drive>DCMI>100>image.CR2
Auto import Does not work with Sony A100 .ARW files with folders by date turned on I have heard from people with other Sony cameras like the A700 also have this issue.
Vista Ultimate 32bit SP1
AMD 64X2 duel core 6000+ 3Ghz
6GB 666mhz Ram PAE force enabled
NVIDIA Gforce 7600 256MB video card (1.75GB total with system shared ram)
Primary hard drive: 500GB
Hard drive 2: 400GB (system and photoshop paging files and lightroom catalog drive)
Hdrive 3: 1TB (primary image storage)
user control turned off
system graphics set to performance
Duel display
Lightroom 2.1
photoshop CS3

I believe this is fixed in version 2.5 and 3.0
ARW (Sony Raw) files seem to work with auto import

File not found error 43 message. What is this?

I transferred a project to a friends logic and everything transferred fine except for the fact that every time we start the tune we get the notification: File not found, result code = -43. After we click through the first error code window another pops up and it says: Fade update failed, (error -43).
It is no big problem except for the fact that these come up every time we hit play. Then after we click through the error messages the song works perfectly.
Any ideas?
Thanks

Hi,
I have a 'file not found' problem with Logic Express. A while back I transferred all my Logic files to DVD to make room on the hard drive. It took 4 discs, saved alphabetically by song title. Now, I nearly always get the 'file-not'found' error message when I try to work on something. Sometimes when I click 'search' it finds the file, sometimes it doesn't. I'm confident that I didn't delete the files.
Wondering if 'search' would find the files if I transferred all the files from DVD to a single folder on an external drive. I don't use the 'search manually' option, because I'm not really sure what I'm looking for, or where to look. In the other room, perhaps? 'Computer challenged' is me. Any suggestions?
DS

"NamingContextFactory class not found" error during deployment

Hi all!
I have a legacy app I need to migrate from JBoss 3.2.7 to 5.1.0 GA.
I have found 13 problems so far and I resolved 12 of them.
The problem I have now is:
Jboss shows this error during startup:
INFO [Http11Protocol] Starting Coyote HTTP/1.1 on http-127.0.0.1-8080
WARNING [collectionmgt] Error creating/registering StarcoreRootNode.
javax.naming.NoInitialContextException: Cannot instantiate class: org.jnp.interfaces.NamingContextFa
ctory [Root exception is java.lang.ClassNotFoundException: org.jnp.interfaces.NamingContextFactory]
        at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:657)
        at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:247)
        at javax.naming.InitialContext.init(InitialContext.java:223)
        at javax.naming.InitialContext.<init>(InitialContext.java:175)
        at com.starview.dm.collectionmgt.StarcoreRootNode.<init>(StarcoreRootNode.java:50)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:
39)
        at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorIm
pl.java:27
        at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
        at com.starview.support.startup.Startup.instantiateClasses(Startup.java:516)
        at com.starview.support.startup.Startup.loadStartupClasses(Startup.java:310)
        at com.starview.support.startup.Startup.access$200(Startup.java:50)
        at com.starview.support.startup.Startup$1.run(Startup.java:130)
Caused by: java.lang.ClassNotFoundException: org.jnp.interfaces.NamingContextFactory
        at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
        at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
        at java.lang.Class.forName0(Native Method)
        at java.lang.Class.forName(Class.java:242)
        at com.sun.naming.internal.VersionHelper12.loadClass(VersionHelper12.java:42)
        at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:654)
        ... 12 more     I see jnpserver.jar is present in common\lib\ folder, so don't really understand why this file can't be found. I also tried to copy jnpserver.jar , jbossall-client.jar and even jnp-client.jar to my_server\lib folder, but it didn't help.
I'm using Windows XP SP3, Sun JDK 1.5.0_18, JBoss AS 5.1.0 GA.
Which other info should I provide so it would be easier to help me? the startup script we use? jboss config files? jboss or app lib folder contents?

Thanks everyone for your input.
I added the sshfactory.jar file in the JavaTask folder and it worked.
Thanks again.
Khanh

Class Not Found Error during provisioning

Hello,
I am running on jboss-4.0.3-SP1, OIM 9.0.3 latest patch. I am new to this implementation and just rebuilt the dev environment. I am checking the provisioning of the resources and ran into a class not found error.
The error says:
2011-10-19 10:23:17,111 DEBUG [XELLERATE.ADAPTERS] Class/Method: tcADPClassLoader/findClass entered.
2011-10-19 10:23:17,111 DEBUG [XELLERATE.ADAPTERS] Class/Method: tcADPClassLoader:findClass - Data: loading class - Value: com.jscape.inet.ssh.SshException
2011-10-19 10:23:17,112 ERROR [XELLERATE.SERVER] Error encountered in save of Data Object com.thortech.xl.dataobj.tcScheduleItem
2011-10-19 10:23:17,112 ERROR [XELLERATE.SERVER] Class/Method: tcDataObj/save encounter some problems: com/jscape/inet/ssh/SshException
java.lang.*NoClassDefFoundError*: com/jscape/inet/ssh/SshException
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpFAPROVISIONING.implementation(*adpFAPROVISIONING.java:92*)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
xxxxxxxxxxxxx
When I looked at the process task named "FA Provisioning", line 92, I see this reference:
90:
91: //Initialize persistant object "INIT"
92: clsINIT = Class.forName("*com.cpsg_inc.oim.unix.SSHCommandExecutor*");
93: maoConstructorArgs = new Object[]{};
94: masConParamTypes = new Class[]{};
95: moCons = clsINIT.getConstructor(masConParamTypes);
96: INITconsObj = moCons.newInstance(maoConstructorArgs);
xxxxxxxxxxx
When I open the adapter task named iNIT Connection (this is the first task in the FA Provisioning process task Adapter), API Source: JavaTaskJar:cpsgUnix.jar
Application API: com.cpsg_inc.oim.unix.SSHCommandExecutor
Constructors: 0 public com.cpsg_inc.oim.unix.SSHCommandExecutor()
Methods: 9 public void com.thortech.xl.integration.tenetssh.helper.SSHPrvosioning.SSHInit(...)
xxxxxxxxxxxx
Then I made sure the jar file named cpsgUnix.jar is present in the OIM_HOME/JavaTasks directory.
But still I have the error.
What am I missing?
thanks
Khanh

Thanks everyone for your input.
I added the sshfactory.jar file in the JavaTask folder and it worked.
Thanks again.
Khanh

"No Disk Found" error during installation of Solaris 10[11/06] on HP 6710b

Hallo Guys,
I am trying to install Solaris 10 on my HP 6710b lap top but it fails with "No Disk Found" error.
I used "Solaris 10 support tool" to check my system and it reports that my system is supported.
You can find the report bellow. I am sure that my disk is OK and I am also using "CD-ROM" option in BIOS for installing solaris from my Solaris DVD.
I have also updated the drivers using "CPQary3-1.71-solaris10-i386".
Please help me.
Thanks,
Qumar
Report of Sun Device Detection Tool
The table below displays the devices detected in your system along with the corresponding driver status in Solaris 10 8/07 on x86/x64 platforms.
All detected devices are supported by Solaris OS.
Solaris Driver 32-bit
Solaris Driver 64-bit
Device Type
Vendor Name
Device Name
Solaris Bundled Driver: pcic
Solaris Bundled Driver: pcic
Bridge
Ricoh Co Ltd
RL5c476 II
Solaris Bundled Driver: hci1394
Solaris Bundled Driver: hci1394
Firewire
Ricoh Co Ltd
R5C832 IEEE 1394 Controller
Third-Party Driver: bcme (Note-1)
Third-Party Driver: bcme (Note-1)
Network
Broadcom Corporation
NetLink BCM5787M Gigabit Ethernet PCI Express
Solaris Bundled Driver: ahci
Solaris Bundled Driver: ahci
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #1
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #2
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #3
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Contoller #4
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #5
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #1
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #2
[W] Solaris Bundled Driver: audiohd
[W] Solaris Bundled Driver: audiohd
Multimedia
Intel Corporation
82801H (ICH8 Family) HD Audio Controller
Solaris Bundled Driver: pci-ide
Solaris Bundled Driver: pci-ide
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller
[W] Solaris Bundled Driver: vgatext
[W] Solaris Bundled Driver: vgatext
Video
Intel Corporation
Mobile GM965/GL960 Integrated Graphics Controller
Open Solaris Driver: wpi (Note-2)
Open Solaris Driver: wpi (Note-2)
Network
Intel Corporation
PRO/Wireless 3945ABG Network Connection
[W]: (1) No Dedicated Xorg Driver supporting Graphic Interface
(2) Driver support for indicated device not guaranteed
Note-1: http://www.broadcom.com/support/ethernet_nic/.
Note-2: http://opensolaris.org/os/community/laptop/wireless/wpi.

Hallo Guys,
I am trying to install Solaris 10 on my HP 6710b lap top but it fails with "No Disk Found" error.
I used "Solaris 10 support tool" to check my system and it reports that my system is supported.
You can find the report bellow. I am sure that my disk is OK and I am also using "CD-ROM" option in BIOS for installing solaris from my Solaris DVD.
I have also updated the drivers using "CPQary3-1.71-solaris10-i386".
Please help me.
Thanks,
Qumar
Report of Sun Device Detection Tool
The table below displays the devices detected in your system along with the corresponding driver status in Solaris 10 8/07 on x86/x64 platforms.
All detected devices are supported by Solaris OS.
Solaris Driver 32-bit
Solaris Driver 64-bit
Device Type
Vendor Name
Device Name
Solaris Bundled Driver: pcic
Solaris Bundled Driver: pcic
Bridge
Ricoh Co Ltd
RL5c476 II
Solaris Bundled Driver: hci1394
Solaris Bundled Driver: hci1394
Firewire
Ricoh Co Ltd
R5C832 IEEE 1394 Controller
Third-Party Driver: bcme (Note-1)
Third-Party Driver: bcme (Note-1)
Network
Broadcom Corporation
NetLink BCM5787M Gigabit Ethernet PCI Express
Solaris Bundled Driver: ahci
Solaris Bundled Driver: ahci
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #1
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #2
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #3
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Contoller #4
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #5
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #1
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #2
[W] Solaris Bundled Driver: audiohd
[W] Solaris Bundled Driver: audiohd
Multimedia
Intel Corporation
82801H (ICH8 Family) HD Audio Controller
Solaris Bundled Driver: pci-ide
Solaris Bundled Driver: pci-ide
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller
[W] Solaris Bundled Driver: vgatext
[W] Solaris Bundled Driver: vgatext
Video
Intel Corporation
Mobile GM965/GL960 Integrated Graphics Controller
Open Solaris Driver: wpi (Note-2)
Open Solaris Driver: wpi (Note-2)
Network
Intel Corporation
PRO/Wireless 3945ABG Network Connection
[W]: (1) No Dedicated Xorg Driver supporting Graphic Interface
(2) Driver support for indicated device not guaranteed
Note-1: http://www.broadcom.com/support/ethernet_nic/.
Note-2: http://opensolaris.org/os/community/laptop/wireless/wpi.

No Objects Found error during Sender agreement in ID

I created all objects, activated in IR and refreshed Cache with SXI_Cache.
Created Scenario in ID.
During Sender agreement creation, I gave Sender Service ( Which doesn't have to be in SLD ). Then Iam trying to pick Interface from drop down. Surprisinglt I cant see any object instead it throws error "No Objects Found" .
What should I do to see the Interfaces from Design?. Any suggestion here ?
Iam doing File to File scenario with Business Service.
Thanks

S T,
from what you've said, you're using Business Services and not Business Systems.
Business Services are simpler (in the sense that you don't need to refer them in SLD and all), but the catch is that they don't have some useful stuff that Business Systems have.
One of these is that, for Business Systems, all the interfaces that are in SWCVs which belong to that BSy are automatically considered as valid interfaces for that BSy.
As for Business Services, you have to define all the interfaces that you want in the BSe, one by one. The good news is that you can use the Message Interfaces of any SWCV of Integration Repository, without having to specifically add the SWCV to the BSe (which can be a pain in the @$$ some times...).
To see and/or include message interfaces for a Business Service, just double click on it on Scenario or Objects tabs of Integration Directory.
Regards,
Henrique.

'Customer Not found' error during inbound delivery

Hi Experts,
During creation of inbound delivery(IBD) with transaction VL31N (against normal PO with doc. type NB), we are getting following error.
Customer not found
Message no. 8B519
Diagnosis
No entry found in KNA1.
Procedure
Please contact your system adiministrator
As per our understanding there should not be any connection for IBD & Customer master. Moreever we are getting this error for Only Brazil Plant. IBD works fine for India & Argentina plants.
Requested to provide any possible clues.
Regards
Manoj

Hi Manoj
This error messag should be realted to the Brazilian localization...
and th e problem reported should be in the table J_1BTVAKV, If you don't need a Nota Fiscal in the step of process, you should not assign the Nota Fiscal type to sales doc type .
Please correct your configuration and perform a new test.
Regards,
Mauro

Urgent: ORA-01403: no data found Error during Order Import

Hi Experts,
I 'am performing order import by populating the order interface tables and then running the order import concurrent program. I 'am encountering the following error while running the order import program:
No. of orders failed: 1
"*ora-01403: no data found in package oe_order_pvt procedure lines*"
Can anyone please provide some pointers on why this is occurring and how this can be overcome. Any pointers on this will be immensely helpful.
Thanks,
Ganapathi

Hi Nagamohan,
Thanks for your response. I tried calling mo_global.set_policy_context('S', <org_id>) before invoking the concurrent program using fnd_request.submit_request(...); But, this still does n't seem to prevent the No data found issue.
One more thing that I noticed is, this is happening while importing the customer along with the order. I 've ensured that I use the same org_id for the customer data as well. Can you please let me know whether there is anything else that I should check for.
Thanks,
Ganapathi

I recently uninstalled and the download I tunes again. I am not getting a message when I try to add new download tunes to my shuffle. "Disc cannot be found"; Error Code (.53). What can I do to fix?

I updated my Shuffle software and after that could no longer add tunes from the ITunes file to my shuffle. I get messages that say the disc cannot be found and an error code (.53). I can download new tunes to ITunes on my computer but cannot then copy them to my Shuffle. Any suggestions? Damned updates!!!

Well my first suggestion would be to return the PC and buy a new Mac instead... but that aside
When you say you moved your iTunes library over how exactly did you do that? Typically I'd suggest that you download a clean version of iTunes from online, and then move over just the music files. Not any of the additional library relates files that are found in the iTunes folder. Yes you'll lose your playlists and song counts, but there are worse things in life.

WHEN I TRY TO PLAY A DVD IT SAYS A Vaild DVD Drive could not be found error code [-70012]. What do i do?

I put in a dvd and tried to play it. it gave me an error code -70012. it will not show any disk and i have tried everything to eject it. what can i do?
error code -70012: A Valid DVD Drive could not be found

To eject the disc, try these options:
Credit Kappy.
Ciao.

Implfactory.properties not found error during application installation

Hi,
I am facing some problem during deployment of application on websphere in Linux machine.
it says "implfactory.properties not found". However when i try to install the same application on some other linux machine. It goes fine.
As this is happening during installation of kit. Can u please let me know which jar file is missing from the Websphere path.
~aman

Hi !! Could you tell me where I might find this implfactory.jar file ?
I've looked around several systems, but have yet to find this jar.
Most systems work, and only one does not.
thanks.......

I'm trying to download the latest version of iTunes. I get an "SoftwareUpdate.exe - Entry Point Not Found error". Any idea what might cause this?

THe error box says procedure entry point not found....then a string of code that "could not be located in the SoftwareUpdateFiles.dll".
I'm try to update my software so I can sync my iPhone with my current iTunes library.
any help greatly appreciated.

Let's first try a repair install of your Apple Software Update.
In your Add or Remove Programs control panel, select Apple Software Update, click "Change" and then click "Repair".
Does the repair go through okay? If so, try another iTunes update. Does it install properly this time?

Persistent surface scan error on techtool- please help

My Powerbook started running slower than usual, so I decided to run the Techtool Deluxe cd I got with my Apple Care plan. I ran all the tests. My result: 5 errors in the Surface Scan test.
I didn't know what to do, so I took my Powerbook to the Apple store Genius Bar. The guy just said I needed to reformat my HD. So, I did the "erase and install" reformat at the store.
But, the genius bar guy didn't seem to know what he was talking about, so after I did all the software updates at home, I decided to run the Techtool Deluxe cd again. Again, the results showed I had 5 errors in the Surface Scan test, even after I had completely reformatted my hard drive.
I had the 3.0.4 version of Techtool, and just to be safe that it wasn't out of date, I installed it on my computer and updated it to version 3.1.2.
With the updated 3.1.2 Techtool Deluxe program, I ran all the tests again.
And STILL I have 5 errors on my Surface Scan test.
Here is a copy of my results (every thing else passed).
Surface Scan
Failed - 5 errors
The Surface Scan test will scan the disk for bad blocks.
Media defects cause this test to fail. You should consider backing up the device, reformatting the media, replacing the data, and then testing again.
Please help! What am I supposed to do???? (I don't think reformatting my HD will help, because I already did, and still have this problem)
Thank you!

Welcome to the Apple discussions.
When you reformatted the hard drive, did you do an erase and write zero's? That's important because that's what remaps the bad sectors of the hard drive. After booting from the OS X CD, choose disk utility, choose the hard drive, and on the erase tab, choose security options and write zero's. If you don't do this step, a plain erase or erase and install only deletes the index or catalog of the disk contents.

Tech Tool Deluxe 'Surface Scan Failed-'

Surface scan repeatedly failing, no recent change to iBook settings, I suspect that this problem may have been caused by m-audio software, however I believe it has been properly uninstalled. Advice?
Error message reads;
'Surface Scan Failed - 212 errors
The Surface Scan test will scan the disk for bad blocks.
Media defects cause this test to fail. You should consider backing up the device, reformatting the media, replacing the data, and then testing again.'
I am unsure as what this report is prompting me to do. What does the term 'media' mean in this context? Which data should I be trying to replace?
Please forward any tips on how to resolve this issue.
<Post Relocated by Moderator>

When I use the disk utility application the volume passes verification, is this contrary to Tech Tools or are they analyzing different elements of the drive?
Yes, different, DU is just basically checking part of the drive, where Directory info is stored & such.
Laptop drives are generally a lot shorter lived than regular drives, which now seem to last 3 to 5 tears.
Although these errors are present it doesn't seem to be effecting my day to day running of things at the moment...
There's a Train Wreck coming up ahead though, you can avoid it, or wait 'till it hits!
Not certain which iBook G4 you have, but here's some ideas on HD replacements...
http://eshop.macsales.com/MyOWC/Upgrades.cfm?sort=pop&model=198&type=DataStorage&TI=5904&shoupgrds=ShowUpgrades

Techtool deluxe found 7 errors during surface scan... what do i do???

Similar Messages

Maybe you are looking for