Teclado sem fio

gostaria de saber se o teclado sem fio da apple tem algum atalho para ipad ou são so os recursos de audio e de luminosidade

como faz pra por acentuação gráfica brasileira com o teclado ?

Similar Messages

  • Preciso dar boot pelo cd, e pede para apetar qualquer tecla do teclado, mas nem teclado sem fio ou com fio(ligado na USB) esta funcionando , e agora?

    Precisp dar boot pelo CD, e esta pedindo para apertar qualquer tecla, mas nem o teclado sem fio e com fio (atraves da porta USB) estao funcionando!
    E agora?

    Por favor, perceber que este é um usuário fórum de usuários. Estamos todos os usuários de produtos da Apple como você. Se você teve dificuldade com a Apple os serviços de tecnologia, então você precisa falar com alguém mais acima na cadeia como umrepresentante do cliente. Ter todos os seus fatos, mas ser breve. Uma história com longas tiradas é tedioso.

  • Como usar as teclas de comando do teclado sem fio no iPad2?

    Como usar as teclas de comando do teclado sem fio no iPad2?

    Boa Noite.
    Realizei a simulação e realmente está retornando o padrão da configuração dentro dos menus de imposto.
    Para contornar esta situação 2 formas.
    Criar uma consulta formatada ou colocar como modelo uma série no qual será controlada na sbo_sp_transactionnotification para não permitir gravação, fazendo com que o usuário altere para o tipo de nota correta.
    At. Junior.

  • Como conectar à rede sem fio automaticamente?

    Tenho um MacBook Pro e ele acessava minha rede sem fio de casa automaticamente quando ligado. Recentemente precisei ressetar meu roteador e agora ele precisa, todas as vezes que ligado, localizar as redes disponíveis e eu tenho que selecionar a minha rede para ele conectar-se.
    Como devo fazer para que ele conecte-se à minha rede tão logo seja ligado?
    Abraço,
    Vagner Rodrigues

    Olá Vagner,
    Essa questão é muito fácil de resolver. Peço desculpa por responder só agora.
    Proceda da seguinte forma: Nas configurações do seu Mac, vá até "Redes". Lá, encontrará "Wi-Fi" (Redes sem fios). Depois clique em "Avançadas" no canto inferior direito da janela.
    Na janela que se abrirá, poderá observar várias redes a que o seu Mac já esteve ligado. Basta arrastar o nome da sua rede de casa para o topo da lista de todas as redes.
    Caso eu não tenha conseguido esclarecer a sua questão, por favor selecione "Reply", para que eu possa voltar a ajudá-lo.
    Cumprimentos.

  • Ajuda ERRO HTTPIO_PLG_CANCELED HTTP 110

    Senhores
    estou ajudando um colega iniciante em um projeto de PI GRC NFe e ele esta tendo o erro HTTPIO_PLG_CANCELED HTTP 110 no servico de verificacao de status de servidor, alguem ja passou por isso, afinal, para piorar o servico HTTP esta ativo no ICM que ja verificamos.
    Alguem?

    Dificil até supor o problem fazendo telefone sem fio.
    Manda ele criar uma conta e vir falar do problema diretamente, fica mais facil.
    Mas de qq maneira, manda ele testar a HTTP destination do GRC pro PI (que vai na SXMB_ADM -> Integration Engine Configuration). Dá a msm msg? Manda ele verificar se o servico HTTP tá ativo na SICF.
    Dá uma olhada nessa thread tb: SM59-HTTP Destination-ABAP PROXY [Server].
    BR,
    Henrique.

  • Drive de impressora

    Minha impressora é sem fio, mas não consigo conectar porque o drive não está instalado no pc.O drive que acompanha a impressora não instala com exito, e não consigo instalar pela web. O que faço?

    Hi @Irlayne71 ,
    Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
    English: http://h30434.www3.hp.com
    Spanish: http://h30467.www3.hp.com
    French: http://h30478.www3.hp.com
    Portuguese: http://h30487.www3.hp.com
    German: http://h30492.www3.hp.com
    Korean: http://h30491.www3.hp.com/t5/community/communitypage
    Simplified Chinese: http://h30471.www3.hp.com/t5/community/communitypage
    Thank you for your understanding
    I work for HP. However I speak only for myself, not for HP nor anyone else

  • Carregador wifi wireless da Apple

    Boa Noite, me chamo Alberto Wagner e gostaria de enviar uma sugestão para Apple, ou um desafio. A minha sugestão seria criar um carregador da Apple que carregasse qualquer equipamento da empresa sem fio. Esse carregador seria wifi, wireless, isto é quando o equipamento se aproximasse do carregador automaticamente o carregaria, sem precisar conecta-lo. O carregador ficaria em um local comum da casa, podendo carregar qualquer equipamento da Apple que se aproximasse dele. O que vocês acham dessa ideia?

    See http://www.apple.com/legal/intellectual-property/policies/ideas.html

  • Acessórios

    Pessoal,boa noite!!!
    Comprei o ipad pelo site das lojas americanas,o cabo USB não estava funcionando quando conectado ao pc.
    A loja efetuou a troca e o segundo ipad mini,apresentou o mesmo problema.
    Alguém mais teve esse problema?

    Kaion,
    Em geral, headphones sem fio usam o protocolo Bluetooth A2DP, para fazerem transmissão de áudio estéreo. Esse protocolo já será suportado na versão 1.2 do Firefox OS [1]. Basta aguardar a atualização. :)
    [1] https://bugzilla.mozilla.org/show_bug.cgi?id=892162

  • Design CleanAir

    Por favor, considerem o seguinte cenário:
    Um ambiente com 10 APs 1142 e uma controller 2504. Gostaria de adicionar CleanAir para oferecer uma maior inteligencia contra as interferências na rede. Pensei em colocar alguns APs 3500 para isto em LMAP.
    Minhas dúvidas:
    Saber se dessa forma consigo obter as funcionalidades básicas do sistema CleanAir utilizando a WLC e o AP 3500.
    Quantos APs 3500 seriam recomendados para este ambiente com 10 APs? Um AP 3500 atende?
    O APs 3500 precisa estar no raio de alcance dos APs que irá monitorar?

    Estou usando o Google Translate isso perdoem-me se isso é incorreto.
    Você não quer permitir CleanAir em um ambiente misto. Assim, adicionando um 3500 para o resto da sua rede sem fio não vai funcionar. você precisa ter todos os AP quer ser 3500 ou 3600 para CleanAir para trabalhar. Você pode permitir a propagação de dispositivos persistentes, mas que não vai conseguir tudo o que CleanAir pode proporcionar.
    Sent from Cisco Technical Support iPhone App

  • ACESSAR INTERNET

    Não consigo acessar a internet do meu celular 3G...
    o que eu faço?

    Cara Odília,
    Obrigado por ter contactado as Comunidades de Suporte Apple.
    Gostaria muito de poder ajudar. Para isso, gostaria de saber em que circunstâncias é que o seu problema acontece: estará relacionado com a sua ligação sem fios (Wi-Fi) ou com a ligação à sua operadora (3G, 4G, LTE)?
    Atentamente,
    Gonçalo Matos
    Estou aqui para ajudar. Clique no botão "Reply" no caso de ter outra questão ou necessitar de outro esclarecimento para que eu possa ajudar da melhor forma que conseguir.

  • Conflict of IP adress

    I have a WRT54G2 and two windows vista pcs connected, one by cable and the notebook by wi-fi, sometimes i connect my iphone too.
    very often when i'm using the notebook, connected through wi-fi, and i connect the other pc or the iphone to the network, my wi-fi drops on the notebook and my network vanishes from the list of networks so i have to turn the router off and on again.
    and sometimes this messsage appears:
    "windows has detected a conflict of IP address.
    another computer of this network has the same IP adress of this network.
    contact the admin.  to get help and solve the problem.
    i could really use some help since i know nothing of this stuff. Thanks!!

    Notebook #1 - using wireless
    Microsoft Windows [versão 6.0.6001]
    Copyright (c) 2006 Microsoft Corporation. Todos os direitos reservados.
    C:\Users\Carol>ipconfig/all
    Configuração de IP do Windows
       Nome do host . . . . . . . . . . . : Carol-PC
       Sufixo DNS primário. . . . . . . . :
       Tipo de nó . . . . . . . . . . . . : híbrido
       Roteamento de IP ativado . . . . . : não
       Proxy WINS ativado . . . . . . . . : não
    Adaptador de Rede sem Fio Conexão de rede sem fio:
       Sufixo DNS específico de conexão . :
       Descrição. . . . . . . . . . . . . : Intel(R) WiFi Link 5100 AGN
       Endereço Físico. . . . . . . . . . : 00-21-6B-44-E9-50
       DHCP Habilitado . . . . . . . . . : Sim
       Configuração Automática Habilitada. . : Sim
       Endereço IPv6 de link local . . . . . : fe80::9a4:cdd7:ed70:930f%13(Preferenc
    ial)
       Endereço IPv4. . . . .  . . . . . : 192.168.1.101(Preferencial)
       Máscara de Sub-rede . . . . . : 255.255.255.0
       Concessão Obtida. . . . . . . . : quinta-feira, 27 de janeiro de 2011 14:25:1
    0
       Concessão Expira . . . . . . . : sexta-feira, 28 de janeiro de 2011 14:25:12
       Gateway Padrão . . . . . . . . : 192.168.1.1
       Servidor DHCP . . . . . . . . . : 192.168.1.1
       Servidores DNS . . . . . . . . : 201.21.192.133
                                           201.21.192.132
       NetBIOS em Tcpip . . . . . . . . : Habilitado
    Adaptador Ethernet Conexão de Rede Bluetooth:
       Estado da mídia . . . . . . . . .  : mídia desconectada
       Sufixo DNS específico de conexão . :
       Descrição. . . . . . . . . . . . . : Dispositivo Bluetooth (Rede Pessoal)
       Endereço Físico. . . . . . . . . . : 00-24-7E-7F-D0-F6
       DHCP Habilitado . . . . . . . . . : Sim
       Configuração Automática Habilitada. . : Sim
    Adaptador Ethernet Conexão local:
       Estado da mídia . . . . . . . . .  : mídia desconectada
       Sufixo DNS específico de conexão . :
       Descrição. . . . . . . . . . . . . : Realtek RTL8168C(P)/8111C(P) Family PCI-
    E Gigabit Ethernet NIC (NDIS 6.0)
       Endereço Físico. . . . . . . . . . : 00-23-5A-AB-55-61
       DHCP Habilitado . . . . . . . . . : Sim
       Configuração Automática Habilitada. . : Sim
    Adaptador de túnel Conexão Local* 4:
       Estado da mídia . . . . . . . . .  : mídia desconectada
       Sufixo DNS específico de conexão . :
       Descrição. . . . . . . . . . . . . : isatap.{0231C69B-094E-4D6A-B702-C11030D3
    CDE5}
       Endereço Físico. . . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Habilitado . . . . . . . . . : Não
       Configuração Automática Habilitada. . : Sim
    Adaptador de túnel Conexão Local* 6:
       Estado da mídia . . . . . . . . .  : mídia desconectada
       Sufixo DNS específico de conexão . :
       Descrição. . . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
       Endereço Físico. . . . . . . . . . : 02-00-54-55-4E-01
       DHCP Habilitado . . . . . . . . . : Não
       Configuração Automática Habilitada. . : Sim
    Adaptador de túnel Conexão Local* 7:
       Estado da mídia . . . . . . . . .  : mídia desconectada
       Sufixo DNS específico de conexão . :
       Descrição. . . . . . . . . . . . . : isatap.{716A8B50-1BA2-4A64-A9CF-17232CA3
    59DD}
       Endereço Físico. . . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Habilitado . . . . . . . . . : Não
       Configuração Automática Habilitada. . : Sim
    Adaptador de túnel Conexão Local* 12:
       Estado da mídia . . . . . . . . .  : mídia desconectada
       Sufixo DNS específico de conexão . :
       Descrição. . . . . . . . . . . . . : isatap.{08B610F8-AC16-4E23-8FF1-68C4DF80
    9DE9}
       Endereço Físico. . . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Habilitado . . . . . . . . . : Não
       Configuração Automática Habilitada. . : Sim
    Adaptador de túnel Conexão Local* 16:
       Estado da mídia . . . . . . . . .  : mídia desconectada
       Sufixo DNS específico de conexão . :
       Descrição. . . . . . . . . . . . . : Adaptador do Microsoft ISATAP #3
       Endereço Físico. . . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Habilitado . . . . . . . . . : Não
       Configuração Automática Habilitada. . : Sim
    notebook #2 - using ethernet cable
    Microsoft Windows [versão 6.0.6001]
    Copyright (c) 2006 Microsoft Corporation. Todos os direitos reservados.
    C:\Users\Glaucia>ipconfig/all
    Configuração de IP do Windows
       Nome do host . . . . . . . . . . . : Glaucia-PC
       Sufixo DNS primário. . . . . . . . :
       Tipo de nó . . . . . . . . . . . . : desconhecido
       Roteamento de IP ativado . . . . . : não
       Proxy WINS ativado . . . . . . . . : não
    Adaptador Ethernet Conexão de Rede Bluetooth:
       Estado da mídia . . . . . . . . .  : mídia desconectada
       Sufixo DNS específico de conexão . :
       Descrição. . . . . . . . . . . . . : Dispositivo Bluetooth (Rede Pessoal)
       Endereço Físico. . . . . . . . . . : 00-25-56-D1-FF-D4
       DHCP Habilitado . . . . . . . . . : Sim
       Configuração Automática Habilitada. . : Sim
    Adaptador de Rede sem Fio Conexão de rede sem fio:
       Estado da mídia . . . . . . . . .  : mídia desconectada
       Sufixo DNS específico de conexão . :
       Descrição. . . . . . . . . . . . . : Dell Wireless 1397 WLAN Mini-Card
       Endereço Físico. . . . . . . . . . : 00-25-56-31-61-A1
       DHCP Habilitado . . . . . . . . . : Sim
       Configuração Automática Habilitada. . : Sim
    Adaptador Ethernet Conexão local:
       Sufixo DNS específico de conexão . :
       Descrição. . . . . . . . . . . . . : Marvell Yukon 88E8040 PCI-E Fast Etherne
    t Controller
       Endereço Físico. . . . . . . . . . : 00-23-AE-E8-58-70
       DHCP Habilitado . . . . . . . . . : Sim
       Configuração Automática Habilitada. . : Sim
       Endereço IPv6 de link local . . . . . : fe80::4d61:6776:3b8e:36eb%11(Preferen
    cial)
       Endereço IPv4. . . . .  . . . . . : 192.168.1.102(Preferencial)
       Máscara de Sub-rede . . . . . : 255.255.255.0
       Concessão Obtida. . . . . . . . : quinta-feira, 27 de janeiro de 2011 14:39:5
    3
       Concessão Expira . . . . . . . : sexta-feira, 28 de janeiro de 2011 14:39:53
       Gateway Padrão . . . . . . . . : 192.168.1.1
       Servidor DHCP . . . . . . . . . : 192.168.1.1
       Servidores DNS . . . . . . . . : 201.21.192.133
                                           201.21.192.132
       NetBIOS em Tcpip . . . . . . . . : Habilitado
    Adaptador de túnel Conexão Local*:
       Estado da mídia . . . . . . . . .  : mídia desconectada
       Sufixo DNS específico de conexão . :
       Descrição. . . . . . . . . . . . . : isatap.{109AE1BD-0CA4-492B-AEF5-75706131
    2BED}
       Endereço Físico. . . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Habilitado . . . . . . . . . : Não
       Configuração Automática Habilitada. . : Sim
    Adaptador de túnel Conexão Local* 6:
       Sufixo DNS específico de conexão . :
       Descrição. . . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
       Endereço Físico. . . . . . . . . . : 02-00-54-55-4E-01
       DHCP Habilitado . . . . . . . . . : Não
       Configuração Automática Habilitada. . : Sim
       Endereço IPv6. . . . . . . . . . . : 2001:0:4137:9e76:202a:1263:3f57:fe99(Pre
    ferencial)
       Endereço IPv6 de link local . . . . . : fe80::202a:1263:3f57:fe99%10(Preferen
    cial)
       Gateway Padrão . . . . . . . . : ::
       NetBIOS em Tcpip . . . . . . . . : Desabilitado
    Adaptador de túnel Conexão Local* 7:
       Estado da mídia . . . . . . . . .  : mídia desconectada
       Sufixo DNS específico de conexão . :
       Descrição. . . . . . . . . . . . . : isatap.{E59334D7-14F7-4547-9979-808D4D28
    C3AA}
       Endereço Físico. . . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Habilitado . . . . . . . . . : Não
       Configuração Automática Habilitada. . : Sim
    Adaptador de túnel Conexão Local* 13:
       Estado da mídia . . . . . . . . .  : mídia desconectada
       Sufixo DNS específico de conexão . :
       Descrição. . . . . . . . . . . . . : isatap.{68BC27D0-A3D2-434D-8638-271F6EBC
    DD2C}
       Endereço Físico. . . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Habilitado . . . . . . . . . : Não
       Configuração Automática Habilitada. . : Sim

  • FIOS Quantum Setup

    After reading all of the negative comments posted on the forum, I decided to relay my experience with the FIOS Quantum TV upgrade.
    The entire process works "when you follow the directions."
    I actually save money by changing my previous equipment, which consisted of 2 DVR's, replaced by one Media Server and 3 clients in the new setup.
    Equipment arrived in one box, efficiently packaged, including return label for old equipment.
    The new system required me to change the router which was the only semi-problem I encountered. The router was not part of the initial shipment and after calling customer service, I recieved it via one-day shipping.
    Excellent guides came with the equipment, walking the customer through each and every step of the process.
    It works great, and good job developing the experience for self-help customers looking to save money on installation.

    rj2014 wrote:
    After reading all of the negative comments posted on the forum, I decided to relay my experience with the FIOS Quantum TV upgrade.
    The entire process works "when you follow the directions."
    I actually save money by changing my previous equipment, which consisted of 2 DVR's, replaced by one Media Server and 3 clients in the new setup.
    Equipment arrived in one box, efficiently packaged, including return label for old equipment.
    The new system required me to change the router which was the only semi-problem I encountered. The router was not part of the initial shipment and after calling customer service, I recieved it via one-day shipping.
    Excellent guides came with the equipment, walking the customer through each and every step of the process.
    It works great, and good job developing the experience for self-help customers looking to save money on installation.
    congratulations on your self installation. we had no choice on having self installation here in Maryland. was told we had to have tech installation due to this was NEW to our areas so no self installation was available.
    4 hours, numerous issues not to mention service that doesn't work as advertised (pause live tv whole house and view anywhere, fios digital voice not accessible via the TV)

  • Watch Brazil vs Germany Live Stream WC Semi Final

    http://www.boston.com/community/forums/sports/mixed-bag/general/watch-brazil-vs-germany-live-stream-wc-semi-final/100/7232884
    http://www.boston.com/community/forums/sports/mixed-bag/general/watch-brazil-vs-germany-live-stream-wc-semi-final/100/7232884
    http://www.boston.com/community/forums/sports/mixed-bag/general/watch-brazil-vs-germany-live-stream-wc-semi-final/100/7232884
    http://www.boston.com/community/forums/sports/mixed-bag/general/watch-brazil-vs-germany-live-stream-wc-semi-final/100/7232884
    http://www.boston.com/community/forums/sports/mixed-bag/general/watch-brazil-vs-germany-live-stream-wc-semi-final/100/7232884

    OP, I feel your pain and can relate all too well.  Unfortunately, at least in my area, this seems to be the norm with FiOS.  In addition, billing problems are so abundant that I could probably write a novel about them, including the two Better Business Bureau complaints that I filed against Verizon for charging me for equipment and services that I never requested nor received!!  The best by far was when Verizon kept insisting that I needed to pay for a tech to visit my house to retrieve the second M-card they "had" to install in my TiVo HD.  I told the tech probably 10 times while he was at my house originally that only one M-card was needed because that's the whole point of a M-card!  Despite this, he insisted on installing two.  He left, I removed the second and unnecessary M-card, called Verizon to return the card and that's when they told me there were going to charge me for a service call (I think $75!) to pick up the extra card that I was returning.  I literally had to fight with them to get them to let me ship back the extra card rather than having to pay for a tech to pick it up.  Don't even get me started on how I had to pay for shipping and then how Verizon continued to charge me for the second card for no less than 6 months after I had confirmation that the extra card was delivered to Verizon.
    Depsite all this, I would NEVER go back to Comcast!!!!!

  • Teclado SMK LINK en Numbers

    Buenas noches,
    quisiera saber si alguien sabe como lograr configurar en Numbers para que el teclado bluetooh SMK LINK modelo VP6273 envie una coma decimal a Numbers y no un punto, es decir cuando intento ingresar por ejemplo: 32,25 me ingresa en Numbers 32.25 y no lo reconoce como numero sino como texto ante lo cual no puedo obtener operaciones matematicas de ningun tipo, comento que he intentado desde preferencias del sistema -> idioma y texto y no he logrado nada, cabe destacar que en Excel para Mac y la Calculadora de Mac OS funcionan a la perfección con este teclado, otra cosa: si ingreso el numero con la coma del teclado de la MacBook Pro funciona todo a la perfeccion.
    Espero haber sido claro y que puedan ayudarme
    En Numbers los numeros en la columna A se escribieron con el teclado SMK-LINK y en la columna B con el teclado de la MBP, en Excel la columna A se ingreso con el teclado SMK-LINK

    Hi I,
    I used Google translate for the translation below:
    I wonder if anyone knows how to achieve set in Numbers for the bluetooh keyboard SMK LINK VP6273 model to send a decimal point and not a point Numbers, ie when I try for example: 32.25 32.25 Numbers enters me and does not recognize as a number but as text to which I can not get any kind of mathematical operations, commented that I tried from system Preferences -> language and Text and I have not accomplished anything noteworthy that in Excel for Mac and Mac OS operating Calculator perfectly with this keyboard, another thing: if I enter the number with the comma on the keyboard of the MacBook Pro everything works to perfection.
    I hope I was clear and you can help
    In Numbers the numbers in column A were written with keyboard SMK-LINK and column B with the MBP keyboard in Excel Column A keyboard entry SMK-LINK
    It appears that in your region, the decimal separator is a comma, and not a period (sometimes called a full stop). For larger numbers, that likely means your thousands separator is a period, and in formulas, arguments are separated by semi-colons (;) rather than comas.
    That would explain Numbers not recognizing 32.25 as a number value.
    The ! sign in the Excel screen shot is a warning the A3, included in the SUM function, does not contain a number. That will generate a warning, but will not affect the result.
    ACTION: Enter your numbers using , as the decimal separator.
    Regards,
    Barry
    Original en Inglés. Traducción de Google.
    Parece ser que en su región, el separador decimal es una coma, no un punto (a veces llamado un punto). Para los números más grandes, que probablemente significa que su separador de miles es un punto y en las fórmulas, los argumentos se separan por punto y coma (;) en lugar de comas.
    Eso explicaría Números no reconocen 32.25 como un valor numérico.
    El! Ingresa la captura de pantalla Excel es una advertencia de la A3, que se incluye en la función SUM, no contiene un número. Eso va a generar una advertencia, pero no afectará el resultado.
    ACCIÓN: Introduzca los números utilizando como separador decimal.
    Saludos,
    Barry

  • Yet another Fios user trying to add a WRT54G as an access point

    Hello all - I've read through the forum and I think I know what I need to do, but want to confirm before I start jacking up a working network.
    Current state - 
    1. Fios (Mi424 WR Rev D) wireless modem / router / gateway is up and running 
    2. If I recall correctly, I set it up with static IP addresses so my wireless enabled printer is always on the same IP and my Linksys Nas200 is too (easier to reconnect both to my work laptop)
    3. Fios router is in downstairs closet in corner of house - kids now want to connect laptop upstairs and signal is not so good
    4. Dad wants to use trusty semi-retired Linksys WRT54G (ver 1.1) as an access point for upstairs but doesn't really want to mess with firmware and doesn't want to run a cat5 cable between the two routers.
    Is this the right way to do it? - (link to Linksys knowledge base answer ID 3733 -----> LINK )
    I have read through this 3 times, but don't understand it very well.  I'm an IT guy by trade, but obviously not a network admin.... Any help is much appreciated!
    thanks,
    Matt

    Thanks for this.  Sad to hear but not shocking.
    Is there any way to make these signals seemless to the end users?  i.e. the same SSID so that it just a user just gets one signal and automagically hits the strongest one?  I'm assuming using the same SSID, channel, key, etc. would do it.
    thanks.

Maybe you are looking for

  • Help! Colour banding graphics problem /posterization?

    Hi. I've been having a few problems lately with colour banding/gradients/posterization. I first noticed it 3 or 3 days ago in photoshop, and seem to have noticed it's mostly system wide. I ask her because you're all clever and I don't have a clue wha

  • SQL: which is better IN or OR

    Hi, I have a query which is in the format: select * from ( select col1, col2, col3 from tab1, tab2, tab3 where tab1.col1='aa' AND tab2.col2='BBB' ... AND (tab1.col1='AA' OR tab1.col='BB' OR tab1.col='CC'... OR tab1.col='NN') ORDER BY tab1.col3 DESC )

  • GetRequestedSessionId() returning null

    Hi! I have a problem regarding sessions, it is, I have a JSP with a session then a link (or a form) to a servlet, the servlet does not sees the jsp session, so I'm passing it via jsessionid in the next way: http://domain/page/servlet;jsessionid=19282

  • Freezing a column in ADF11g

    Friends, I am working in ADF11g. I need some help in freezing a column. I have around 30 columns on the screen and out of which one column needs to be freezed at design time..meaning when the User scrolls to the right that column should be visible. I

  • Import and Export to Memory

    hi guys, im currently making a program that imports and exports data into a memory so that when the user logs out that would still remain in the memory. The data would be use for the slection screen but i can't seem to make it work.  Could you please