Tecra 750: Question about Infrared and TV remote control

Hi there,
I am wondering if anyone can help. I have an old Tecra 750 which I am using as an audio system to play my MP3 collection. It has an Infrared detector on it and I was wondering if it is possible to use this to receive IR from a TV remote control so I can use a remote to navigate my audio files. Does anyone know how to do this or where I could find out how? Is there any freeware to help perhaps? Is it even possible?
Thanks!

Hi,
The computer uses IRDA infra red and this is not compatible with the type of infra red used by normal remotes.
You could get an external infra red remote control which will plug into the USB port.

Similar Messages

  • Tecra A2: Question about DVI and external monitor

    Hello,
    I'm trying to get a DVI Signal from the Tecra A2 using the advanced Port Replicator III but without luck. Does the A2 support DVI anyway?
    Another question: Is it possible to set the primary display to the external Monitor when using "extended Desktop"?
    Thanks
    Ralph Menon

    Hello Ralph
    Your unit doesnt support DVI port and you can not use it. As far as I know just ports that you can find on the unit you can use in Port Replicator because the signal is just loop through.
    The problem with primary display is that notebook is set to primary one and it can not be changed (on my Tecra M1 neither). The Windows will starts on external one but box for password will always appears on notebook display.
    Bye

  • Satellite P850 - question about Infrared port

    Hi,
    I have Windows 8 Pro installed onto my laptop and I've downloaded all the drivers and everything is working fine apart from the Infrared. I've searched all over the internet and I can't find a remote control to use with this laptop (including the Toshiba website).
    I've installed the latest ENE CIR Driver (v4.1) as well as the Toshiba Remote Control Manager (v3.1.0.1). I looked in Program Files to open the Toshiba Remote Control Manager however when I click on the program to open it... Nothing happens (including in the notification area).
    So my question is can I actually get a remote working with this laptop at all and if not then what is this Infrared port for because I can't find anything on my computer to actually use it with/for?!
    Thanks for your help :p

    Hi
    Some Satellite P850 models are equipped with the remote controller and its possible to use the remote controller with Windows Media Center to play discs or videos, to view pictures and to watch recorded TV programs.
    Models which dont include the a remote controller are *NOT* equipped with the an infrared receiver so the notebook cannot be operated with a remote controller.
    The remote controller was not part of the package so your notebook does not support infrared receiver and therefore the installation of ENE CIR Driver and Toshiba Remote Control Manager was useless

  • A question about grub and USB

    Hi All
    I have a quick question about grub and USB that I can't quite find the answer to by searching.   Most of the FAQs discuss booting a full linux dristribution from USB. My situation is this.  I am getting a new computer with two drives, the second will be arch and the first will be Vista (for my wife).  I want the computer to boot the same way that my wife's machine boots at work so I don't want to install grub on the MBR.  So, is there a way to have all of the grub config files and kernels installed on the second drive and simply install to grub boot loader to the MBR of a USB stick?  My goal would be to simply plug the USB stick into the new PC and boot arch from the second drive. 
    Thanks
    Kev

    i cant say for hp's
    havent worked on any in a while
    recent machines have been coupleof dell's , vaio & emachine
    which dells do offer it at least the ones i tried , my laptop does(dell)
    all home pc's are built by me which do offer to boot individual drives
    what hp you getting it may tell in specs
    are both discs sata? if so it might not offer this option with 2 drives of same interface
    check your power supply alot of these preconfigured machines put cheap under reated power supplies in there
    & will burn your motherboard i just replaced PS(250 watt) & mobo(845gvsr) in an emachines <cheap stuff<
    i hope you researched the pc before buying ie : mobo, power supply are the biggest concerns
    i find it much more benificial to build my own machine gives me peace at mind. the cost is sometimes more in $ but not always , your biggest expense is time researching hardware
    if you live in usa the best places to start looking are bensbargains.net & pricewatch.com
    i am not affiliated with either & niether sell the hardware they are just advertisers a place to buy
    for costomized machines that i would trust is unitedmicro.com theyll asemble & test before shipping
    i have gotten 2 machines so far from them with NO PROBLEMS with hardware (knock knock)
    you may want to consider this in your next venture for pc

  • I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM... I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM? Is there any way to get more VRAM to play games on steam?

    I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM...
    I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM?
    Is there any way to get more VRAM to play games on steam?
    I've learned  by reading other topics that I can't upgrade my graphics card on my Macbook Pro because it's soldered into the motherboard or somthing like that, but please tell me if there is any way to get more video ram by chaning some setting or upgrading something else. I'd also like to know why I only have 256MB of VRAM when I have 8GB of RAM, since I have 8GB of RAM I thought I was supposed to have 560mb of VRAM...
    So the two questions are...
    Is there any way to upgrade my VRAM, so that I can play games on steam?
    Why do I only have 256MB VRAM when I have 8GB total RAM?
    Other Info:
    I have a quad core i7 Processor.
    My graphcics card is the AMD Radeon HD 6490M.
    I am also trying to play games on my BOOTCAMPed side of my mac, or my Windows 7 Professional side.
    THANK YOU SO MUCH IF YOU CAN REPLY,
    Dylan

    The only two items that a user can change on a MBP are the RAM and HDD (Retinas not included).  You have what the unit came with and the only way you will be able to change that is to purchase a MBP with superior graphics
    If you are very much into gaming, the I suggest A PC.  They are far superior for that type of application to a MBP.
    Ciao.

  • A few questions about MacBooks and Parallels Desktop.

    I have a few questions about MacBooks and Parallels Desktop.
    1) I understand I need at least 1GB of RAM to run Parallels Desktop but what about the hard drive, is the stock 60GB drive big enough?
    2) Related to question 1, even if it was big enough to allow me to install and run Windows would the 60GB drive be enough if I wanted to install a Linux distribution as well?
    3) This has nothing to do with Parallels Desktop but thought I'd ask it here anyway, do Apple Stores carry just the stock MacBooks, or do they carry other configurations?
    Thanks
    Keith

    1. Depend on how intensive you use that HD for saving data on both Mac OS and XP. For standard installation on both OS X and XP, the space of 60 Gb is enough.
    2. Same answer as no 1. You can install all three on that HD space, but the extra spacce available will be less and less for your data. You can save your data on external or back up on cd/dvd and erase it from the HD to keep the free space.
    Remember to leave at least 2 or 3 Gb for virtual memory usage.
    3. Just call them, maybe they don't have it in store stock, but by appointment they might configure one for you before your pick-up date.
    Good Luck

  • One question about Pricing and Conditions puzzle me for a long time!

    One question about Pricing and Conditions puzzle me for a long time.I take one example to explain my question:
    1-First,my sale order use pricing procedure RVAA01.
    2-Next,the pricing procedure RVAA01 have some condition type,such as EK01(Actual Costs),PR00(Price)....,and so on.
    3-Next,the condition type PR00 define the Access Sequences PR00 as it's Access Sequences.
    4-Next,the Access Sequences PR00 have some Condition tables,such as:
         table 118 : "Empties" Prices (Material-Dependent)
         table 5 : Customer/Material
         table 6 : Price List Type/Currency/Material
         table 4 : Material
    5-Next,I need to maintain Condition tables's Records.Such as the table 5(Customer/Material).I guess the sap would supply one screen for me to input the data of table 5.At this screen,the sap would ask me to select one table,such as table 5.When I select the table 5,the sap would go to the screen to let me input the data of table 5.But when I use the T-CODE VK31 or VK32 to maintain Condition tables's Record,I found it's total different from my guess:
    A-First,I can not found one place for me to open the table,such as table 5,to let me input the data?
    B-Second,For example,when I select the VK31->Discounts/Surcharges->By Customer/Material,the sap show the grid view at the right side.At the each line of the grid view,you need to select the Condition Type at the first field.And this make me confused very much.Why the sap need me to select one Condition Type but not the Condition table?To the normal logic,it ought not to select Condition table but not the Condition Type!
    Dear all,I'm a new one in sd.May be this is a very stupid question.But it did puzzle me for a long time.If any one can  explain this question in detail and let me understand the concept,I will appreciate him/her very much.Thank you.

    Hi,
    You said that you are using the T.codes VK31 or VK32.
    These transaction codes are used to enter condition records for standard condition types. As you can see a grid left side having all the standard condition types like price, discounts, taxes, frieghts.
    Pl check using T.code VK11 OR VK12 (change mode)
    Here you can enter the required condition type, in the intial screen. (like PR00, MWST, K004, K005 .....etc)
    After giving the condition type, press enter or click on Combinations icon on top of the screen. Then you can see all the condition tables which you maintained for that condition type. Like as you said table 118, table 5, table 6 and table 4.
    You can select any table and press enter, then you can go into the screen in which you have all the field cataglogues you maintained for that table. For example you selected combination of Customer/Material (table 5) then after you press enter then you can see customer field on top, and material fields.
    You can give all the required values and save the conditon record.
    Hope this is clear.
    REWARD IF HELPFUL.
    Regards,
    praveen

  • 2 question about GPU and Lens correction ,cs5

    Hi
    i have 2 questions about Gpu and lens correction in Cs5
    1)Filter->lens correction->search online
    i get often and almost every connection time out at the first click on search online , at the second click i get no online profile
    is it normal?
    2) question is about Gpu
    it run faster , but talking about ajustament layer
    like saturation or vibrance for example
    i found with the gpu on , a light slow refresh compared with gpu off
    i have set cache  levels 6 ,history 20
    i guess are the defaul
    well i add a saturation layer and move the saturation slide ,increase o decrease saturation
    with Gpu Off , the changes are immedially , i mean i can see in real time the increase o decrease of saturation
    with Gpu On it takes a few(very few) time more
    again is normal ?
    don't be angry , i'm going to buy cs5 and i'm unsecure ... the price make a big role
    thanks

    For what it's worth, I also see a timeout on the first [ Search Online ] click, after about half a minute delay.  Second click turns up results immediately.  This happens each time Lens Correction is started, even without restarting Photoshop, and in both 32 and 64 bit versions.  Also note that I started with one profile listed by default (though from the wrong camera) for my 40D with 28-135 zoom.
    I alsow noticed that I was seeing progress bar activity in the Lens Correction dialog while I was typing this (even though Lens Correction was NOT the active window) every time I hit the 'L' key.  Strange.
    Windows 7 x64.
    -Noel

  • Three questions about Java and Ftp

    Hello, i've the following questions about Java and Ftp:
    1- .netrc file is in $HOME directory but i can't access to this directory from java code. The following line producesan Exception (directory doesn't exists)
    FileWriter file = new FileWriter ("$HOME/.netrc");
    2- .netrc file must have the following permissions: -rw- --- --- but when i create the .netrc file the following permissions are on default: -rw- r-- r--, how can i change this permissions? (In java code, i can't use chmod.....)
    3- Are there any way to pass parameters to a .netrc file? If i get to do this i needn't change the permissions because i can't modify or create/destroy this file.
    Thanks in advanced!!!
    Kike

    1- .netrc file is in $HOME directory but i can't
    access to this directory from java code. The
    following line producesan Exception (directory
    doesn't exists)
    FileWriter file = new FileWriter ("$HOME/.netrc");$HOME would have to be replaced by a shell, I don't
    think you can use it as part of a legal path.
    Instead, use System.getProperty("user.home");
    Ok, thanks
    2- .netrc file must have the followingpermissions:
    -rw- --- --- but when i create the .netrc file the
    following permissions are on default: -rw- r--r--,
    how can i change this permissions? (In java code,i
    can't use chmod.....)Yes, you can: Runtime.exec("chmod ...");
    I need to use estrictly the .netrc with -rw- --- --- permissions
    Yes, i can use Runtime.exec ("chmod ..."); but i don't like very much this solution because is a slow solution, am i right?
    3- Are there any way to pass parameters to a.netrc
    file? If i get to do this i needn't change the
    permissions because i can't modify orcreate/destroy
    this file.I don't think so. Why do you need the .netrc file in
    Java at all? Writing a GUI frontend?I want to use automatic ftp in a java program and FTP server, the files and path are not always the same, so i can:
    - modify .netrc (for me is the complex option)
    - destroy and create a new .netrc (is easier but i have permissions problem)
    - use .netrc with parameters but i haven't found any help about it
    Thanks for your prompt reply!!!!
    Kike

  • Basic question about storage and safety in iMovie '11

    A very basic question about storage and safety:
    I want to keep a backup of my raw footage on my external hard drive prior to begin working on the movie in iMovie. I want to do this:
    1. Upload the digital files from my camcorder to my Desktop *(as opposed to iMovie)*
    2. Duplicate that footage/clips.
    3. Put the duplicate clips/footage into a folder labeled with the name of that footage (like "Fun At the Dentist" or "Jimmy Learns How to Yodel").
    4. Drag the folder with the footage/clips into my external hard drive into a pre-existing folder titled "Backups/duplicates of all of my raw footage/clips." This big granddaddy folder will house all of the child folders of different movies.
    5 Then, open up iMovie '11 and import the raw footage/clips from my Desktop rather than from my camcorder.
    6. Then I want to make a duplicate of my finished movie and put it in my external hard drive in a "Finished Movies" folder.
    I know that the original raw unedited footage will always be in iMovies '11 but I want the original to also exist immediately accessible in my external hard drive.
    QUESTION:
    Is this viable? Is it wise? (I know it goes an extra unnecessary step, but aside from that.)
    *Do you have any precautionary advice?* Should I do something in my iMovies '11 preferences? What?
    In earlier years with iMovie '04 or '06 (cannot recall) I made many novice errors and ended up losing audio to my finished movie. I also lost footage.
    This time around with iMovie '11 I don't to make such novice, ignorant errors.
    Thanks so much for any comments to this question.
    -L

    Yes I'm sure it will work great for you.
    The iFrame format is something Apple has come up with. The reason for its existence is unknown to me so I can only speculate. But it seems to me that Apple "invented" this format in order to have devices such as Ipod/Ipad/Iphone/Ixxx create clips that are editable on consumer hardware such as already mentioned devices but also standard Mac computers, without the need for format conversion.
    iMovie converts most input formats during import, which takes a lot of time, and this need for conversion often comes as a surprise to most people new to home video editing.
    iFrame has a resolution of 960x540 which is long way from the common standards of 1920x1080 and 1280x720. If your end target is YouTube however, this may not be too bad though. However if you intend to go with YouTube HD, you may find iFrame footage to look wrong since they are effectively upscaled to a higher resolution.
    Technically iFrame uses the H.264 algorithm, a smaller frame size (960x540) and a rather low compression scheme. This will result in large files, but the plus side is that the files are ready for editing without the need for any conversion and iMovie will natively edit the files.

  • Question about RAC and ASM

    Hi,
    We are thinking about build RAC using ASM for OEM database. It'll have two nodes, oracle 10g and Hitachi san with solaris ( or linux ). I've few questions about RAC and ASM.
    1) Do I need to have ASM instance running on each node ? ( most likely yes... but want to make sure )
    2) can I share oracle_home between ASM instance and database instance ? what is the best choice ?
    3) I'm planning to use shared disks for all files, all databases.... what are the pros/cons ?
    4) what should be the installation procedure ? Meaning, first create ASM instance on each node, then install cluster software, build RAC databases...... can someone explain..
    5) I believe RMAN is the only option for backup since I'm using ASM, correct ?
    I'm a newbie to RAC and ASM..
    Thanks,

    user4866039 wrote:
    1) Do I need to have ASM instance running on each node ? ( most likely yes... but want to make sure )yes.
    2) can I share oracle_home between ASM instance and database instance ? what is the best choice ?in 10g you can, in 11gr2 you cannot. and it might be better to seperate them because it will give you more flexibility with patching.
    3) I'm planning to use shared disks for all files, all databases.... what are the pros/cons ?if you share your oracle_home you won't be able to do rolling updates. so i recommend to keep oracle_homes local.
    4) what should be the installation procedure ? Meaning, first create ASM instance on each node, then install cluster software, build RAC databases...... can someone explain..follow the install guide for your respective version. for 10g you'd install clusterware first, then asm and database is last.
    5) I believe RMAN is the only option for backup since I'm using ASM, correct ?pretty much. you could stop your database and dump the raw devices or use asmcmd/asmftp but rman is definitely the best choice
    Bjoern

  • Question about the "iPod radio remote"

    I assume the "radio remote" is the same for every country and is under software control. I want to buy in Canada but use in UK and Canada.
    Has anyone got one and seen the RDS work, in the UK almost every FM channel is RDS. Do they have RDS in Canada (Toronto) can anyone confirm?
    And of course it says FM so this again I assume no AM, not that I need AM it was just an interest in if it could do it.
    What happens about headphones, you can plug a pair into the remote, can you still plug into the bottom of the iPod or does the remote connector get in the way.
    What is the story with "line out" I use this all the time as I amp my headphones. So I assume you cant use line out? or is the remote a line out also.
    And I assume the remote cable and you headphones act as the aerial, how is the quality? Is it any good indoors, some little FM radios I have used drop to mono indoors. Does this Apple one frop to mono if the signal is weak?
    Someone that has one can perhaps answer
    Cheers
    Ray

    I can at least answer some of the questions.
    The RDS function on this radio/remote is poor in the
    UK. You have to set the radio function on the iPod
    to "Europe" and when you do this RDS info is not
    displayed on almost all radio stations such as
    Virgin, XFM, Capital, GLR, etc. It does display on
    Radio 2 however. At least, this is my finding. So
    it's unpredictable at best. Setting the radio to
    "USA" on the iPod increases the likelihood of getting
    the RDS to display, but the downside is that you can
    then only tune the radio in increments of 2mhz which
    is a bit awkward if your looking for 89.1mhz!
    There are three settings for the radio which you
    choose via the iPod. They are USA/Europe/Japan. No
    setting for Canada, although I'm sure you will still
    be able to use it over there as I can still use mine
    here in the UK even if it's set to USA.
    No, there is no AM radio.
    You can plug headphones into the remote or the
    headphone jack on the iPod, or both at the same time.
    I'm not sure I understand your question about the
    bottom of the iPod. The radio plugs into the iPod
    via the dock connector.
    There is no 'line out' on the iPod. If you mean the
    one on the dock, then no you can't use it as you
    cannot place the iPod into the dock whilst the
    radio/remote is connected as they use the same
    connector.
    Yes the cable of the remote acts as the aerial.
    Reception is surprisingly good where I am, but it
    will of course depend on where you use it. I've
    used it indoors without any drop in signal or it
    dropping to mono.
    Lastly, you need to update the software for both the
    nano or the 5th generation for the radio to work
    (after you do this a radio function appears in the
    menu), and some users have found that doing this
    screws up the iPod. I have mine working on both the
    nano and the 5th gen without any problems.
    There is a review of the radio/remote here. I like
    mine and consider it a worthwhile accessory, but of
    course there will be those who disagree.
    iPod
    Radio/Remote Review.
    Thank you for the reply.
    Think your right USA or Europe will work in Canada.
    Yes I mean the line out via the dock, I just wondered if the remote become a line out socket (I also use a pocket dock for line out for headphone amp as I use a pair of Sennheiser HD600 with my ipod) but of course that is silly becasue you have a volume control on the remote and line out is normaly fixed.
    Based on your views I shall get one in March when in Toronto
    Cheers
    Ray

  • Question about the FRONT ROW REMOTE

    ok i have 2 questions about this remote.... i ordered a Mac Book Pro and am waiting for it....
    Well the 1st question is that has anyone use Powerpoint or Keynote with this remote. That would be great for keeping me mobile while giving my speeches...
    2nd. Is the IR "eye" in the computere sensitive to other products. Maybe a cell photo that has the obex all locked up (thanks VERIZON)....
    any info would be great
    steve

    Sorry to disappoint you but I don't think it is that kind of a remote. It seems to be designed strictly for audio/video software. I have tried it with both Keynote and PowerPoint and all it did was effect iTunes that was running in the background.
    As far as other IR devices; I aimed all the IR remotes I have and tried different buttons. Nothing happened. But things like TV remotes usually have to be coded to the specific devices you wish to have them operate. If you purchase a Universal Remote for your TV, DVD, VCR, etc., you have to tell it what the brand and model are, usually from a list of codes that come with the remote.

  • HT201303 hi just got my new apple ipod touch i need to update my security information other wise it wont let me download apps it says to enter three questions about myself and i get to the third question and it wont let me enter the third question

    hi just got my new apple ipod touch and to download apps it wants to add questions about myself for more sercurity information. i get up to question 3 and it wont let me select a question but it will let me write an answer so i just pressed done and then it says i cant carry on because ive mised out information when it wont let me do a question!

    Welcome to the Apple community.
    You might try to see if you can change your security questions. Start here, change your country if necessary and go to manage your account > Password and Security.
    I'm able to do this, others say they need to input answers to their current security questions in order to make changes, I'm inclined to think its worth a try, you don't have anything to lose.
    If that doesn't help you might try contacting Apple through Express Lane (select your country, navigate to iCloud help and enter the serial number of one of your devices)

  • Just installed iOS6, questions about "iMessage" and other things...

    I've been a satisfied iOS4 user since I bought my iPhone4, but I was forced to install iOS6 tonight in order to download a "free" app. I found a few new icons on the screen along with about 200 percent more "Settings" I'd like to ask some questions about. I'm sure a few of these could be answered by doing a frantic and thorough search through weeks of posts but I'm a little short on time right now.
    First, what exactly is iMessage? Looking at the page for it, I can't see any difference between it and regular text messages. The info page says its to avoid charges, but between my data plan and not being charged for text I don't see where theres any other benefit. The one person I text with the most recently asked me why I had not installed iMessage yet, and didn't have an answer when I asked him why I should. I guess he just wanted to see text replies in blue instead of green.
    In a related bit, flipping through Settings>Messages>Send & Receive I find a "2 addresses" section, with my phone number in there as well as my email under "You can be reached by iMessage at:" and "Start new conversations from:". What good does it do iMessages to have my email address? Does the Mail app handle text as well as email addresses? That seems to be the only explanation, and also very odd to think I'd be trying to text through my Mail app.
    Second, looking through the Settings>Mail I see now that I have an icloud email address as well as the mac.com address I've been desperately hanging on to for the past 10 years, and the me.com address they've been trying to force me into since those came out. (I was happy to see I could delete the me.com address from the phone. I wish I could delete it from the universe.)
    I wasn't even aware there was a such thing as icloud.com addresses. When did this happen? What is it used for?
    Third, under that icloud Setting I see a long list of apps with buttons labeled "Off" under it. What are those for? Under the Mac.com settings I see switches for "Mail" and "Notes", with Mail on and Notes off. The Notes app (which I haven't used since my old iPhone 3) still opens, regardless of this setting.
    Fourth, I now have an item called "Facetime" under my Settings. It is off, but underneath it says "Your phone number and/or email address will be shared with people you call". I understand caller ID normally sends caller number info to the receiver, but why would someone need my email address if I call them?
    Fifth, I now have a "Music" setting, at the bottom of which I see a "Home Sharing" item, which when clicked brings up my AppleID and asks me if I want to Sign Out or Cancel. What is Home Sharing? Its also at the bottom of the "Video" settings.
    Sixth, now I have Twitter and Facebook settings? For what? I don't have accounts with either of those companies. So why have settings, especially since it asks me to create accounts and download apps for those companies right in the Settings?
    Seventh, there is a camera icon on the unlock screen. Touching it causes the screen to bounce up about a quarter inch, almost but not quite revealing something behind it. I should probably just quit asking about this stuff already, but I'll take the bait - what is this now?
    Finally, what is the Notification Center used for?
    If I got a text under iOS4, it would put an alert on the Unlock screen. Scrolling through this huge list of things under the Notification settings I'm really blown away by all the apps set up to yell at me. I can see having an alert for a text message but Game Center? What the heck is that, and why is it set up to hit me with a "Badge App Icon" (whatever that is) when I get alerts from "Everyone". Similarly, the phone is set to alert me to something called a "Photostream Alert"? What is this? Why is there a Phone section for the Notification Center? So they can put a Notice on my screen to tell me the phone is ringing? Holy cow! The phone is set to send me alerts from the "Weather Widget". So if I miss the fact its raining there will be a message on my screen to let me know? Whats next - a buzzer to tell me I'm listening to music?
    There's a lot more, like what would I need Passbook for when I have the actual movie tickets, gate boarding passes, coupons, etc in my hands, but we'll leave that for another time. Many thanks to all who can offer some answers to my questions above.

    Hey Taantumus!
    Here is an article that will provide some guidance on this question:
    Apple ID: Changing your password
    http://support.apple.com/kb/ht5624
    The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

Maybe you are looking for