Tecra 8000 - How to connect HDD to an other notebook?

Hello, what kind of device do I need in order to connect an old Tecra 8000 hard drive to a notebook from an other manufacture?
I just want to transfer some data but the ac connector on the Tecra no longer works.

Hi!
You can use an external HDD case with USB port for this.
The external HDD case should be for 2.5 HDDs and with IDE interface. Thats all.
Contact your local computer dealer. Im sure they will have such cases.
Bye

Similar Messages

HT204387 how to connect iphone 4s to other iphones via bluetooth??????????

how to connect iphone 4s to other iphones via bluetooth??????????

Asked and answered at one of your other posts.
https://discussions.apple.com/message/25174543#25174543

Tecra 8000 - hard drive connection

Hi,
My old Tecra 8000 gave up last night after 4 years' faithful service. It's simply refusing to start booting most of the time. I think it's a motherboard problem as it occasionally boots from floppy and remains stable for about 10 minutes. I know that the hard drive is fine as I can copy files to floppy when booting from floppy into DOS mode. Is there any way I can connect the hard drive to a desktop PC so that I can salvage the files that are on there?
Thanks for your help,
Tom

Hi guys,
Thanks for all of your help, I went and got an IDE/USB convertor this afternoon - I didn't realise that you had to take the case off of the hard drive first to reveal the standard connector. Have rescued all of my data so quite relieved about that...
Thanks again for your help. Best,
Tom

Tecra 8000: what name has HDD connector?

Hello,
i need the name of the Hdd connector from Tecra 8000.
Who can help me?
Greez Chris

Hello
I have found info Toshiba has delivered two different Tecras 8000. Can you please write exact number from the notebook sticker? It must be something like Tecra 8000 (PAT80AE-xxx).
Maybe it will be easier to identify which HDD is inside.
Bye

How to connect MS Access or other d/b tools to SAP R/3

Hi SAP Experts,
I got a requirement i.e by using MS Access or other database tools to take the SAP table dumps and analyze gaps or errors in the system data using business guided .
I don't know how to connect MS Access to SAP R/3 and how to connect other database tools to SAP R/3.
pls any body can explain me on this topic or inform me where i can get the corresponding documents.
This is urgent for me.
I appreciate you're help.

Hi,
For some databases (for example MSSQL, Oracle,...) you can use transaction DBCO (table DBCON) to create connection to external database. Then you can use native SQL in ABAP programs (EXEC SQL command).
Krzys

How to connect TOSHIBA 28W23 to other PC?

I posted this on a number of different forum sites but no one really know the answer.
So, its this
If i have an old TOSHIBA 28W23 - how can this be connected to a other GX270 PC?
If anyone has any advise id love that.

This depends on available ports/jacks.
Dont know both devices but possibly your notebook supports a scart socket.
In such case you have to use a scart cable.
Does the computer supports s-video port? If yes, then you could use a s-video to scart cable in order to connect both devices.

Tecra M5: How to use HDD password when HDD is connected as external device?

I have a Toshiba Tecra M5 with MK1032GSX hard disk. I put a bios password and HDD password. Every day I power on my laptop by digit my password only one time: unlock disk and bios. The screen for password is before windows starts.
One day motherboard of my laptop is broken, I bring my pc on Toshiba support center (less disk), and I waiting for it (2 month ago). I need to read my date from disk but it is locked by password. The disc is SATA disk, I put it on a desktop and I see it in bios and in peripheral of windows resource, but I don't see it in explorer.
Any of software that I tried (HDD unlock, atapwd...) wont work. I have my password, I have not forgotten it.
How can I read my date? Can you help me?
Thank you.

as far as i know its not possible to remove the hardware password from the HDD other than by using your laptop.
Still if you google arround I think I saw once something about a Linux distro that was able to unlock some HD's. Not sure if thats still arround but perhaps you can give it a go. Still I would not advise doing something like that has its possible that it messes up your HD and then you will be stuck with a good paperweight.
The proper course of action when you send ur laptop to warranty is to make a full backup. There are image software out there that allows you to make a mirror image of your HD for example. I, myself, bought a 100GB USB2 2.5' HD that fits my pocket and goes with me everywhere. I've encrypted it with TrueCrypt so no one has access to my sensible information if loose it and I make regular backups from the laptop to this HD. It saved my life at least 2x.
Just my 2 cents
Cheers

How to Connect Oracle Developer to Other Databases

Hello I am using Developer 6i.
Want to connect this to another Database like Ms.Access or Ms.Sql Server.
Send me how to USE OCA,
I tried hard but Not Success

hi
plz use Net Configuration Assistant or set tnsnames.ora with connect string and computer name.
Net Configuration Assistant.
when its opened then go to .
*Local Net Service Name Configuration.
*Click Next.
*Add.
*Click Next.
* Service Name--Type here connect String which is XE or any Connect String.
*TCP.
*Click Next.
*Host Name--Enter here Computer name or Ip address.
*Yes,Perform a test.
you can enter correct password and username here.
Note:- your Database should be Up if its not Up it will through the same error so plz startup your database first.
sarah

Well I bought a WiFi router. How to connect old Macs and other things??

Hi,
I purchased a WiFi router mainly for my PSP but I also want to connect my Macs wirelessly to my router. What older Macs can connect to it and how? What other stuff can connect to it?
Thanks

In about an hour AR is going to start complaining about the cost being too high and wanting cheaper alternatives. The solution to each situation exceeds the value of the computers themselves. Don't bother asking if there is another less expensive way to do it because there is not.
Expect to pay at least $50 for one.
For the 8600 there's also a Belkin USB adapter that has OS 9 drivers and I believe there are PCI card wireless adapters that work under OS9 as well (although I can't recall which ones).
*Proxim Skyline PCI wireless card, that is what WAS sold and worked in 8.6-9.x - they are no longer made and the company was taken over by a larger one that stopped all Mac related support so no new drivers were made.
*Belkin has drivers for the F5D6050 USB device. They are OK, but not as reliable as one would want. Relative to each other the OSX drivers are better than the OS9 ones.
*Smart money would buy a wireless bridge.

How to connect Apple TV to other users at the internet

Can anyone tell me if I can share a iTunes libary with a friend/brother who also have direct ADSL connection to the internet? We both have a Apple TV device and iTunes, and would like to share the contens with each other. I have already tried the network settings, but until now without luck! Is it possible????
Thanks in advance

Perhaps this is a step in the right direction:
http://lifehacker.com/software/vpn/
I dont have Apple TV yet but like this idea of an encrypted VPN
Macbook 2GHZ/2G Ram Mac OS X (10.4.9)

How to connect i phone5 with other device

My phone cant connect with sony smartwatch 2

The Sony SmartWatch is designed for Android devices only.
Works as an NFC watch with all smartphones using Android 4.0 (Ice Cream Sandwich) and later
http://www.sonymobile.com/global-en/products/accessories/smartwatch-2-sw2/specif ications/

How to connect the two virtual machine .

I installed VM workstation and created two virtual machine .Please suggest me how to connect them internally each other though vm network editor.I want create RAC Setup for practice.

NAT is the default adapter type in VirtualBox, which will work in almost any configuration and networking environment. Using the NAT adapter, the host system will establish connections on behalf of the guest OS. NAT requires that the corresponding VM guest adapter uses DHCP and cannot be used to provide any services unless you configure port forwarding (>1024) at the VirtualBox VM NAT adapter.
Bridged networking is the most transparent adapter type, but requires a physical network adapter on the host OS, which is limited depending on the host system and hardware, e.g. wireless. It also requires that the user understands network and routing restrictions of the host system in case of using the interface to communicate between the host and VM. A combination of host-only and NAT may sometimes be necessary to allow the VM to connect to the internet and allow the host to communicate with the VM guest OS.
Btw, the host-only adapter IP actually works on behalf of the host OS and can be used to allow the VM to access the host system. So if Internet is not required, the NAT or bridged adapter are not required. I'm not sure if many people realize that, since it's not really mentioned in the documentation. So if you use the host-only adapter, simply use the host-only IP instead of the host system real IP to connect the VM to the host OS.
I also switched to VirtualBox a couple of years ago, mainly because it provides more VM hardware options, is free and because of the ability to manage multiple virtual machines and group them together. I have about 70 virtual machines for testing and evaluating configured on my home computer. I also like the option in VirtualBox to clone a VM based on a Snapshot.
VMware provides a Virtual Network Editor in VMware Workstation (KB 1018697), which allows to customize any of the existing virtual network adapter or add new ones. The available technologies under any Type 2 hypervisor are very similar between different products:
http://www.vmware.com/support/ws45/doc/network_configure_ws.html

How to connect tables

hi...gurus.....
i hav a problem.....there is a alv requirement where most of fields are from vbak,vbap,kna1 vbuk table....but there is a field vsmng from vbepd table.....and i dont have an idea how to connect this table with other tables...becas at last i want all fields in a final table.....
Please help me....
thanks & regards
Arijit

hi..vinod ....according to ur suggestion i write the code
IF NOT IT_VBAk[] IS INITIAL.
    SELECT VBELV
                posnv
              VBTYP_N
              VBTYP_v
              RFMNG
      FROM VBFA
      INTO corresponding fields of TABLE IT_VBFA
     FOR ALL ENTRIES IN IT_VBAK
      WHERE VBELV = IT_VBAK-VBELN
       and posnv = it_vbap-posnr
       AND VBTYP_V = 'C'
       AND VBTYP_N = 'J'.
becas i hav to put all data in final table......i think i made a mistake to write a query...so plzzz check thsi query and correct it.....
becas when i write for all entries it shows error that " vbap is a internal table with no header line" and when i commnet for all entries line then in output it cant show any thing...just show "0.00"
so plzz help me....
i will wait for ur rply
Thanks & regards
Arijit

Tecra 8000 does not recognize new HDD

I read this forum and searched Google, but nothing helps.
I think the HDD on Tecra 8000 ( Pentium II , 266 Mhz ) is "dead".
I tried to replace it with one from another laptop to see if that would work.
The laptop doesn't recognize it, although I put everything back as the original.
Is there a special way or do I have to change something in the Bios?

Hi
The BIOS settings dont need to be changed
As long as you use the compatible HDD, the BIOS should recognize the HDD automatically without any big troubles
What HDD did you use? What size, interface, etc
The Tecra 8000 is a oldie and I think you could use only the 4GB; 6GB; 9GB; 10GB; 14GB IDE HDDs.
Bigger HDDs would be not recognized by BIOS.

Tecra 8000: Missing OS, how to install

I have this old Tecra 8000 and it had Win ME on it. I used some software called Kill Disk, and after reboot I get "OS Missing".
I have a bootable CDR with a (legal) copy of XP Pro on it. But nothing happens when I insert the CD, it runs for a while but the "OS Missing" message remains. I have tried to reboot with the CD inserted, but nothing but the message.
It's and old comp but I still want it to run, there are no mechanical failures, so...any help much appreciated.

First account did not allow me to login, so I made a new account.
Anyway, I can not alter my BIOS since the boot process is only about 1 second. All I have is the Toshiba logo followed by the OS Missing message. I know my way around the settings in the BIOS, boot order and all, but this I dont understand. I do not have a command line or anything, just this annoying message.
If I start the comp while pressing F12, I get a message about how to insert a BIOS Update Diskette.
- So I downloaded the latest BIOS update, copied it to a 1.44 MB floppy and inserted it into an external floppy drive. Well, that did not work out, probably some USB error?
- I tried to burn the update files to a CDR, start the comp while pressing F12, inserting the CD on message, but no response either :(
Any other suggestions on how to solve this?
Message was edited by: Yavis2

Tecra 8000 - How to connect HDD to an other notebook?

Similar Messages

Maybe you are looking for