Tecra 8100 Internet Password

I have recently purchased a used Tecra 8100, attempts to connect to the internet appear to be failing either because the equipment was previously used on a LAN with a supervisor password (which I don't know), or because the modem tone signal is missing (as reported during the `dial-up'), maybe the two are connected.
How can I get rid of the supervisor password, which inserts itself in the `dial-up' box automatically ?

Hi
As far as I know you can not delete the supervisor password without to know the old one.
I have found this Toshiba document which describes how to setup the Supervisor Password with Toshiba Assist Utility?
http://support.toshiba-tro.de/kb0/FAQ6201DY0010R01.htm
But in my opinion the supervisor password has nothing to do with the dial-up box.
I assume you use the modem connectivity to connect to the internet? Am I right?
If you can not connect so please check the modem properties. There you will find the dial control area. There you can disable the option Wait for dial tone before dialing.

Similar Messages

Tecra 8100 - no sound output except from mic!

I have a Tecra 8100 running Windows XP.
I can get no sound out of the speakers or headphones outputted from the computer, e.g. beep sounds, CD, etc. But if I un-mute the mic, I can hear through the headphones what the microphone picks up (there's just feedback without microphones, proving the speakers physically work). All the volume controls are on maximum and unmuted. All the devices are enabled and chosen correctly in the sound control panels.
Any help at all would be welcome!! Is it the sound card, or am I missing a driver? can't find anything else on the web with similar symptoms. Thanks in advance.
Here is the Everest summary report:
Field Value
Computer
Computer Type Advanced Configuration and Power Interface (ACPI) PC (Mobile)
Operating System Microsoft Windows XP Professional
OS Service Pack [ TRIAL VERSION ]
Internet Explorer 6.0.2600.0000 (IE 6.0 - Windows XP)
DirectX 4.08.01.0810 (DirectX 8.1)
Computer Name TECRA-8100 (Tecra 8100)
User Name General User
Logon Domain [ TRIAL VERSION ]
Date / Time 2009-07-15 / 14:18
Motherboard
CPU Type Mobile Intel Pentium IIIE, 500 MHz (5 x 100)
Motherboard Name TOSHIBA Portable PC
Motherboard Chipset Intel 82440BX/ZX
System Memory [ TRIAL VERSION ]
BIOS Type Toshiba (12/30/99)
Communication Port Communications Port (COM1)
Communication Port ECP Printer Port (LPT1)
Display
Video Adapter S3 Graphics Inc. SavageMX (8 MB)
Video Adapter S3 Graphics Inc. SavageMX (8 MB)
3D Accelerator S3 Savage/MX (86c270)
Monitor Generic Television
Monitor Toshiba Internal 1024x768 Panel
Multimedia
Audio Adapter Yamaha Native DS1 Audio CODEC
Storage
IDE Controller Intel(r) 82371AB/EB PCI Bus Master IDE Controller
Floppy Drive Floppy disk drive
Disk Drive IBM-DARA-212000 (11 GB, 4200 RPM, Ultra-ATA/66)
Optical Drive TOSHIBA DVD-ROM SD-C2402 (8x/24x DVD-ROM)
SMART Hard Disks Status OK
Partitions
C: (NTFS) [ TRIAL VERSION ]
Total Size [ TRIAL VERSION ]
Input
Keyboard Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
Mouse HID-compliant mouse
Mouse PS/2 Compatible Mouse
Network
Primary IP Address [ TRIAL VERSION ]
Primary MAC Address 00-10-A4-E1-F9-30
Network Adapter Xircom CardBus Ethernet II 10/100
Modem TOSHIBA Internal V.90 Modem
Peripherals
Printer Epson ActionLaser 1100
Printer HP DeskJet 540
Infrared Controller Infrared Port
USB1 Controller Intel 82371AB/EB PIIX4 - USB Host Controller
USB Device USB Human Interface Device
Battery Microsoft AC Adapter
Battery Microsoft ACPI-Compliant Control Method Battery
Battery Microsoft ACPI-Compliant Control Method Battery
DMI
DMI BIOS Vendor TOSHIBA
DMI BIOS Version Version 2.30
DMI System Manufacturer TOSHIBA
DMI System Product Portable PC
DMI System Version Version 1.0
DMI System Serial Number [ TRIAL VERSION ]
DMI Motherboard Manufacturer TOSHIBA
DMI Motherboard Product Portable PC
DMI Motherboard Version Version A0
DMI Motherboard Serial Number [ TRIAL VERSION ]
DMI Chassis Manufacturer TOSHIBA
DMI Chassis Version Version 1.0
DMI Chassis Serial Number [ TRIAL VERSION ]
DMI Chassis Asset Tag [ TRIAL VERSION ]
DMI Chassis Type Notebook
DMI Total / Free Memory Sockets 2 / 0

Hello
Thats a good questions and I never heard about such an issue...
I think at fist you should start to update the sound driver of your notebook. Therefore you can look on the Toshiba website for an update:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Before you install the newest version, you should remove the old version first and restart the notebook.
Maybe a reinstallation of Windows with the Toshiba recovery disk could be also useful and in worst case its a hardware malfunction and you have to exchange the mainboard. :(
Greets

Tecra 8100 - missing tv-out cable

Hello.
I have recently bought a Tecra 8100 laptop. Unfortunately there is no tv-out cable included.
According to the manual (ie. here: http://www.microdom.by/olddata/pdfspec/tecra_8100.pdf) the tv-out port provides a s-video (NTSC/PAL) signal via 3,5mm mini jack port.
The missing cable should be a RCA conversion cable.
Can anyone please tell me if there any specific requirements that such cable needs to meet? It's not hard to get an audio mini-jack to 2xRCA conversion cable, but this one obviously does not transmit the video signal.
Any clues?
I'm working on Win XP SP2, the graphic card installed is S3 Savage/MX.
Thanks in advance for any tips.

Hi mate,
I know that cable; its a rare accessoire of the Tecra 8100. The problem is, that the 3.5" mini-jack has its own format, so, it will only adapt from 1x 3,5" to 1x RCA.
Such cables can be either found on Ebay, or you contact an ASP (authorized service partner) which could surely send you such cable for some low money...
Heres a link (if you need it) to find the nearest ASP in your country:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
Good luck man

Question about internal Bluetooth connector on Tecra 8100?

Hello all.
I have a pt810e-13c52-sp notebook. Upgraded to 512MB by using 2 toshiba 256mb pc100 modules bought in ebay, upgraded to a PIII 850 also got in ebay, and upgraded to a bigger 40GB wdc wd400e hard disk, with much less noise than 12GB original one.
Messing with my computer i have found an internal "bluetooth" connector next to the internal one that belongs to the keyboard.
Why is this?? Is there any unreleased Bluetooth module for Toshiba Tecra 8100??

Hi Toka
Maybe I am wrong but I have found info that Tecra 8100 has no BT and this model can not be upgraded with BT module. Usually BT will be used just sometimes and if you need BT you can use USB BT stick. It is pretty easy to configure it and this small part can be used whenever you need it.

Display Brightness Turns Down at Tecra 8100

Hi:
I have bought a used Toshiba Tecra 8100 - after two month without problems the monitor suddenly turned down the
brightness - at the beginning the turn-down was only few, now it is quite often.
I tried already several things: first I thought it was because of the old battery ... but after buying a new one the problem was still there. Sometimes after freezing
several times by closing or just by pushing the freezing
button it works fine. Until now I cannot find a source of
the problem (also changed the power settings ... doesnt matter) ... therefore I am quite at the end of my nerves - besides this little, but highly critical problem I am still very satisfied with this fine computer.
Hope to find help in the forum.
Regards, Bjoern

I too am in the same situation, but I just wanted to clarify the problem. The machine boots up fine, but occasionally the backlight fails completely. This is quite sporadic although rebooting invariably fixes the problem (temporarily). Is this a software or a hardware issue?
Thanks, David

Replace power adapter for Tecra 8100

Hi support,
I have Tecra 8100 where its original power adapter has died. I need to buy a new one, but I found that Toshiba has replaced the PA2444U adapter model with a new model. Which power adapter model that is now compatible with Tecra 8100?
Thanks. I really need an answer because I need to work with the laptop.

The Tecra 8100 will function with many adapters from Tecra 8000, 8200, 9000, 9100 and the M1, M2 range etc.
There are of course differences in the output current rating, but in practice it is still possible to use a higher output adapter without issue, provided the voltage is 15V DC.
For example, I am currently using a model PA2450U (15V, 3A) plugged into my Tecra 9100 port replicator and this works fine. The only potential down side is that it might take longer to charge the battery than it would with the correct model (which would be rated 4A).
This means you shouldn't have too much trouble finding a suitable substitute.

Tecra 8100 only boot up in safe mode

I seem to have lost the display drivers to my Tecra 8100.
Since I attempted to use an extra screen which worked fine until I came to boot up the following day when it would only boot up in Safe Mode.
What have I done wrong and how can I rectify it?
Driver detective doesn't work, just comes up as having performed an illegal action.

Lars,
I'm afraid that it seems that Toshiba no longer provide the drivers for the Tecra 8100 as it's such an old computer, around 12 years old. I have been on the Toshiba website and tried again on the site you suggested but to no avail. Sorry about that but am still hunting.
Regards
bfg267

Tecra 8100: updating bios from cd. exe won't run from command line

I want to update the bios of my Tecra 8100.
I downloaded the bios, but as the pc has no floppy, I cretaed a bootable cd like this
When I boot the pc, do F2, press c to boot from cd, I get into a dos-like environment. I went to drive Z, did 'dir', and see the bios.exe I burned on cd. To run it I type bios.exe and keep getting "command of filename not recognized" when i type dir *.exe, it does not see the file either.
Maybe I am overlooking something here?
+Message was edited by: link removed - wrong info+

Thank you.
It was a different bios then on this page:
I got there from [this|http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory =8&selFamily=195&selSeries=24&selProduct=103&selSh ortMod=null&language=13&selOS=all&selType=4&yearup load=&monthupload=&dayupload=&useDate=null&mode=al lMachines&search=&action=search&macId=&country=all &selectedLanguage=13&type=4&page=1&ID=20831&OSI D=-1&driverLanguage=42 ] page
The download contained a iso, so that was easy enough to do the update.<br /><br />
Thank you very much.
Laptop is fully functional again, better then it ever did on win98se.

Tecra 8100 Drivers for Windows XP

I recently installed the XP on a separate partition. My Tecra 8100 originally has 98SE. Now I find that some drivers are not loading in XP....like for PCMCIA card ect. Can some one tell me where to get the same. In driver download list from Toshiba, I do not see the PCMCIA Card driver.
Also some thing very funny...My DVD ROM can not read the "coloured" DVDs/CDs. I mean the new blank discs are bright colourful like red/blue/black etc on the data side. My DVD ROM reads the white discs but not these coloured ones. Any one heard of this before ???

Please, take a look at
http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
Clicking on "Downloads" will take you to a screen where you can choose the Tecra 8100 and find OFFICIAL downloads for this model and Windows XP!!!

Tecra 8100 not seeing all installed memory

I'm working on a Tecra 8100 laptop for a friend. Machine doesn't seem to recognize memory installed in Slot B at all. Is there a trick in the BIOS to force it to rescan or am I simply looking at a broken slot? It looks ok visually and the clips seem sound .....

I agree with Feliks;
Either RAM module or the slot could be faulty.
You should try the RAM module in slot A in order to check the functionality.
If the same RAM would function in slot A but not in slot B then I would assume that the slot B is damage.

Will a WD1200BEVE fit in a Tecra 8100?

Hi there, I was wondering if a Western Digital WD1200BEVE would fit in a Tecra 8100. It's an ATA-100 HDD, so it would be no problem, right? Just asking to be sure.
Solved!
Go to Solution.

Tecra 8100
It's EIDE and less than 137 GB. Windows NT or later shouldn't be a problem. So it should work.
That laptop came with up to 20 GB drives. So it's conceivable the BIOS won't accept or see all of 120 GB.
-Jerry

Tecra 8100 does not power up let alone boot

Any help appreciated.
I have a Tecra 8100 laptop which has recently refused to power-up or boot. If I connect AC power the DC IN indicator shows steady green. I then press the power-on button and the laptop momentarily attempts to start and sometimes you briefly hear the CD drive whirl into life. But then the laptop shuts down (normally after less than 1 second from the power up) and the DC IN indicator flashes orange. If I disconnect and reconnect AC power the DC IN indicator resets to steady green.
I have tried changing the battery power pack and both memory SIMMS with known working replacements. I've also left the battery power back on charge for quite a while - all to no avail.
Appreciate any ideas you may have. I suspect it won't be worth sending back to the manufacturer for repair as the warranty has expired.
Many Thanks,
Liam.

Hi,
do you see the red Toshiba logo when the notebook start up for theese second?
When the Toshiba logo is shown then the hardware should be ok, otherwise there is somethng wrong with it!
Then please contact a service partner for a short check up! At https://eu.computers.toshiba-europe.com you will find list with all available european service partners!
Bye Chris

How to adjust the brightness on Tecra 8100?

hello there i'm using a tecra 8100 and I just cant find where to adjust the brightness which is really giving me problem. Please anyone help.

> Since I install my Windows XP, I can't use my Fn button.
@pardhi
You have installed the OS manually and you didnt use the Toshiba recovery CD. Am I right??
The fresh Microsoft OS does not contain the Toshiba drivers and therefore the drivers for the FN functions must be installed additionally.
The problem is that you will not find any drivers for the Windows XP for the Tecra 8100.
The WinXP drivers are not available and therefore you cannot use the FN keys

Tecra 8100: DVD Video-Playback only with jerking/flickering under W2K

I cant play a normal DVD on my Tecra 8100 (P3-600MHz, 256 MB RAM, Windows 2000 with SP4)
without jerkings. Have already try to copy image from DVD to HDD and play directly from
HDD - same result. Therefore it is NOT a problem with the DVD-Drive, possibly a problem
with the integrated S3 Savage/MX VGA-Card. S3 Display driver V 5.12.1.7002 installed.
Tested with PowerDVD 6 and VLC media player. Any special DVD-Playback software for the
8100 available ??? Please help, trying several hours to solve this problems, already
talk with toshiba hotline !!!

Hi
Well, the Tecra 8100 is not a high performance notebook and maybe its generally not possible to watch DVD jerking-free.
But I think you should check several settings before we will give up ;)
So check if the DMA and not the PIO mode is available and set on IDE controllers.
Check if you have installed the latest DirectX.
You said you use the latest graphic driver. Well maybe you will check this site:
http://www.s3graphics.com/en/resources/drivers/legacy/software_archive.jsp#id_290298drv
Check also if the installation of some codex will help you:
http://www.divx-digest.com/software/nimo_pack.html
The Nimo Codec Pack is a nice collection

Need a display driver (s3) for Tecra 8100

I have installed Windows XP pro on my tecra 8100 and can't get a full screen.
Does anybody know what's wrong? Do I need a new display driver voor the S3 Savage MX or is it something else?

Hello,
check in the Bios if the setting "Fullscreen/Widescreen" is enabled.
Best Regards,
Ben

Tecra 8100 Internet Password

Similar Messages

Maybe you are looking for