Tecra 9000: After SP2 installation the Yamaha sound driver does not work

Hi,
I own a Tecra 9000, with a Yamaha AC-XG sound card.
The problem is that since I installed Windows XP with SP2 included, I lost my sound.
I know also that Toshiba is aware of this situation and they have managed to post a solution for it. I've tried this solution:
Detail:
The Yamaha AC-XG driver uses PortCls function for checking the operatingsystem version. XP Service Pack 1, PortCls function is changed, then the Yamaha driver cannot get operatingsystem version correctly. The operatingsystem provides the version for Windows 95. Therefore the Operatingsystem has a blue screen. Therefore Microsoft added the workaround and illegal drivers are blocked from working on SP1. This issue also happens Windows XP SP2.
Yamaha already provides the fixed drvier to Toshiba. The fixed driver version is the following;
yacxg.sys 6.13.10.2152 with software synthesizer
yacxgc.sys 6.13.10.3152 without software synthesizer
How to fix this issue:
Install the fixed driver on a system before/after installing Windows XP Service Pack 2.
Install steps:
(1) Unzip an attached file on your hard disk.
(2) Run SETUP.EXE
(3) Click the Next button.
(4) Choose "Yes, I want to restart my computer now" and click Finish.
A toshiba engineer told me that first of all I needed to install the old driver "5.12.01.3141", and it worked out ok, but still no sound.
And then he told me to install the version "6.13.10.2152", but this went wrong. I've got the error message "Driver was not installed".
I already tried lots of different drivers, including generic and yamaha drivers.
Please tell me a good solution for this issue if possible.
Thank you very much,
Hugo

Hi Hugo
It seems today is your lucky day ;)
Thanks to Toshiba because the Toshiba computer knowledge base is a really useful area and I have found many useful document and solutions!!!
I found also a solution for your tiny issue ;)
As you said the problem is the Microsoft service pack 2. The sound driver makes some troubles after the installation of SP1 or SP2 and therefore the update is necessary!!!
Please take a look here:
Windows XP Service Pack 1a or Service Pack 2 incompatible with existing Yamaha sound driver
http://ftp.toshiba.ca/support/techsupport/tsbs/all/-TSB000805.htm
Good luck

Similar Messages

Sound driver does not work after reinstalling XP on Tecra M9

Hi,
After lot's of fighting i've given up. It's just been imposible to get my sound card up a running on my TECRA M9 PTM91E, after i decided to give it a clean up by formating the disk entirely. My proceedure goes as follows:
1. Installed WINDOWS XP SP2
2. Downloaded of all drivers on another pc. Downloads from toshiba's official driver site: http://es.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=ES
3. Installed drivers in correct order following instructions: http://es.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/tracker.jsp?file=http%3a%2f%2fsupport.toshiba-tro.de%2ftedd-files2%2f0%2finstall-20070918164527.zip
4. No luck when attempting to install sound card driver (download page specifies an integrated realtek) tried following version first: http://es.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/tracker.jsp?file=http%3a%2f%2f81.27.174.52%2ftedd-files2%2f0%2fsound-20071002102843.zip
5. Messed around trying older drivers from other TECRA M Series laptops, no luck either.
6. Decided sound card just might not be a Realtek and tried other models on the download page: Sigma and Analog Devices Inc. Tried those but got back a non recognition alert.
Has anyone had this problem as well? My best guess it's just might be a problem about the driver version...

Yes, I have exactly the same problem.
We are building our master unit and we *must* do a install from bare metal of all the software. We do an automated provisioning for the rest of our massive purchase.
We have build a custom version of the Windows XP SP2 installation CD (with disk and chipset drivers injected). It has been working ok.
We have installed all the software drivers using the same procedure as yours (in the order proposed in install.txt).
The only thing that has failed is the sound.
This is the first place we ask for a solution. I hope we will have an answer (from toshiba) soon.

Re: Satellite A200-1MY: XP sound driver does not work

Hello,
I have a problem concerning my sound driver ( I use windows XP) . I installed all the xp drivers and it still doesn't work.
Can anyone tell me where to get a working driver ?
Thanks.

I hope you use WXP SP2. Anyway check please this thread. Try to use instruction given by Eldorado.

System recovery on Sattelite M70-204 PSM71E. The CD/DVD drive does not work

Hello!
Can you please give me some help and advice on the way to resolve the following issues:
I have had over the last three months minor problems with Windows Installer: software updates could not always be performed successfully, an error message was issued by Windows Installer regarding Quick Time when I started the computer. Apart from it, the computer was runing correctly. I had plan to restore the system with the Toshiba CD in the coming weeks to correct the issues.
But since yesterday, I have had a new problem. The CD drive is not recognized anymore under Windows XP.
I have tried to repair the driver from the CD drive following the procedure described by Toshiba. It did not work. I do not know if it is an hardware or a software problem which prevent me to recognize and use the CD and DVD drive under Windows XP and I do not know either if I can still run anymore a Restore process.
_*1/If I launch a Restore process, I believe that, at the start ,the HD will be formatted. How can I be sure that my computer will be able to read the data from the Toshiba Restore CD?*_ ( I have today a computer which still works almost properly. I would not like to be stuck with a completely dead computer, if the Restore process fails due to the CD driver)
_*2/ Is it possible to restore without using the internal CD drive? (use of an external CD drive or external HD)*_
Thank you in advance for your help and advice!

Please ignore my request!
I have been able to fix the problem by correcting the Register. The CD/DVD drive works now properly.

My sound system does not work AFTER installing pc to tv wireless connection

my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille

After installing acrobat my Microsoft office package does not work properly, word will not open and in my email i can't select anything with the mouse

After installing acrobat my Microsoft office package does not work properly, word will not open and when I want to write an email in my outlook email i can't select anything with the mouse. so copy past en delete are not an option.@

Are you using any MS Office third party Add-ins? Test: Remove third party Add-ins other than PDFMaker. Test to see if the MS Office apps run afterward.
Did you attempt to repair MS Office? Test: Go to Add/Remove Control Panel run Repair.
Finally, have you tried testing to see if it's PDFMaker? Test: Use the Add/Remove Control Panel to modify the Acrobat installation to remove PDFMaker. See if MS Office applications launch and behave correctly?

My ipad2 shuts down completely after I press the sleep button and does not start.... Help please

My ipad2 shuts down completely after I press the sleep button and does not start.... Help please
This started since the latest update!!!!!!!!!!!!!!

Hi Alkaf,
Welcome to Apple Support Communities.
It sounds like your iPad will not turn on. Take a look at the iPhone article linked below, it provides tips that will help resolve power issues for both iPhones and iPads.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
-Jason

After last update the split keyboard option is not working and side switch button option works opposite for mute and rotation lock

After last update the split keyboard option is not working and side switch button option works opposite for mute and rotation lock.

Hi
A long story about your issue... I think the reason of this is why you have deleted some registry keys. If you delete something in the Windows registry you should really know what you do. You can damage the complete Windows system!
So I think this is the reason why the keyboard doesnt anymore.
In the user manual I have founded that the CD-ROM booting option is only available with optional optical disk drive.
So for me it sounds like that your USB CD drive is not compatible to the notebook

The application called VirusScan that comes preloaded on the macbook will no longer open, claiming that it is corrupt and that I must reinstall it. After looking in the app store it does not appear that said application is available for re-downloading.

The application called VirusScan that comes preloaded on the macbook will no longer open, claiming that it is corrupt and that I must reinstall it. After looking in the app store it does not appear that said application is available for re-downloading. Is there a special, non-app store place where I am to go for this?
Also, I installed MacKeeper about two-three months ago and am questioning its performance. Looking for input as to whether or not this application helps or hinders my system.

I'll back up Csound on the MacKeeper thing. In fact, I actually wrote the following about it:
http://www.reedcorner.net/news.php/?p=245
Remove is ASAP. Do not use the provided uninstalled, as there are widespread reports of pop-ups advertising MacKeeper on your system after incompletely removing it. Try this:
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
As for VirusScan, Barney is right on the money that it does not come preinstalled on any Mac shipped new from Apple. However you have gotten it, your best bet is removing it. See my Mac Malware Guide for more information that will help you understand and avoid Mac malware without relying on anti-virus software.
http://www.reedcorner.net/guides/macvirus
(Note that my pages contain links to other pages that promote my services, and this should not be taken as an endorsement of my services by Apple.)

After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. Apple care does not know what is the cause. Please help

After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. After 4 calls to apple and 8 and a half hours on the phone. The apple people does not how to solve the problem. The last thing they told me is that they will send the problem to their engineers and I will hear from them. unfortunately they have not contact me.
During the phone calls I tried putting the date and time in automatic, changing the username and password, I even tried using somebody elses username and password. Please help, facetime is my tool to telecomute, and it is hurting my job.

I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272

I have no sound for games in my iPad. I have tried the reset but it does not work. The speakers work as I have sound for music and videos.

I have no sound for games in my iPad. I have tried the reset but it does not work. The speakers work as I have sound for music and videos.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
Check your settings. The iPads have a small switch on the right edge. http://support.apple.com/kb/ht1430 It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can’t hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
 Cheers, Tom

Just completed a clean install of CS6 Photoshop on my Yosemite Mac Book Pro and the Adobe Application Manager does not work and cannot install a fresh copy from Adobe

Just re-installed a fresh copy of CS6 Photoshop on my Yosemite Mac Book Pro and somehow the Adobe Application Manager does not work and therefore cannot verify my copy. What should I do?
I get a message saying that Adobe Application Manager may be damaged and that I should install a new version of AAM. But after downloading a fresh copy of AAM and doing the install, the program (AAM) still will not install. It is like an infinite loop!
Please, someone help!
Thanks!

HI gener7!
I'm sorry but I am not on Creative Cloud. I'm still on CS6 and it was the Adobe Application Manager that wasn't working and I could not install the update to this application. My AAM version is: 8.0.0160
The link you provided was the update that I wanted to install but it does not work. A window shows up during that install that says:
We've encountered the following issues.
Installer failed to initialize. Please download Adobe Support Advisor to detect the problem.
and then the link to the Adobe Support Advisor which leads to a "Adobe Support Advisor has been discontinued" page.
Thanks!

Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

I have F.F 3.6 and windows 7.: 1) When i want to buy a airplane ticket and want to select 2 adults or 2 children, the draw down select, does not work in any websides,? WHY?. 2) Have FF any problems with SKYPE

I have F.F 3.6 and windows 7.: 1) When i want to buy a airplane ticket and want to select 2 adults or 2 children, the draw down select, does not work in any websides,? WHY?. 2) Have FF any problems with SKYPE
== This happened ==
Not sure how often
== After innstalling windows 7

As a suggestion I'd put the Text_io segments into their own begin - exception - end sub-blocks within the main code. This way if Text_io does raise an exception you can catch it earlier as it may be able to recover - That is if it is a text_io exception.
Other than that you;ll have to step through in Debug.

Tecra 9000: After SP2 installation the Yamaha sound driver does not work

Similar Messages

Maybe you are looking for