Tecra A11-1EJ - more detailed specs help

Tecra A11-1EJ, might be my next notebook. but as an audio pro related hardware compatibility i need info. which USB controller is installed (example intel ICH10)?
This info is essential for time critical low latency audio hardware connected.

thanx doc, but the same pdf I have.
NAME of the controller? CODE? An example: dell precision, nice design, rough pc, has it all. inside it`s all chinese chipsets, a pc worth 400eur. sold for 2500eur. not bad. but low latency audio forget on chinese chipsets. right now my Satellite P200-1BA still goes and on all texas instruments chipsets, any audio hardware works like on a desktop, no wonder why. Good job toshiba here!
But the problem is here, I am a customer that do not mind paying 200+eur, but give me the best, I need less than 4ms latency here! I need a workstation, and I do not mean design, I meand brand chipsets, best hardware. Without this we have no performance guys.
Name? You know what you sell or is it a secret?

Similar Messages

No more detailed specs for legacy laptops

Hi All,
Where can I get a complete list of ever built X60(s) and X61(s) **types** along with their full specs? (assuming of course that each type uniquely IDs its spec)
This one doesn't contain a single word about X60(s)/X61(s) unfortunately:
www.lenovo.com/psref/pdf/ltwbook_WE.pdf
Many thanks in anticipation,
Dmitriy
X1 20A8-S0WT08, 2x X61s 7667-34G, X61s 7667-Y24, X61s 7666-AA5, X60s 1702-W96, T43 2669-YJ6, T42 2373-Q91
Solved!
Go to Solution.

Hi Dmitriy,
I found an old link to the North American ltwbook, but none for Western Europe. It may exist but I don't know where to look Here's the NA ltwbook in case that helps.
The QuickPath box at the old support site will give per-MTM specs. Maybe that is sufficient for your needs?
I don't know that either of these links will persist, so use them soon.
ThinkPad Notebooks; 2005 to 2013 (withdrawn models)
http://support1.lenovo.com/en_US/
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Cisco TelePresence - more detailed specs and questions

Hello,
I am currently conducting a light research into various video-conferencing systems and would love to know a little more about Cisco TelePresence video-collaboration solutions.
I have read the on-line publications made available by Cisco, but have a few remaining questions.
Following is the list of such questions, should you find yourself being able to answer any of them - please do net hesitate to do so:
Q. What is the frame rate of a 1080p video stream when it is being transmitted at no greater than 5Mbps bandwidth consumption?
Q. What is the maximum possible frame rate for a 1080p video stream?
Q. Given the 5 Mbps bandwidth consumption limits, what is the latency (without taking into account the underlying network latency) to encode and then decode the 1080p video stream at 25 fps?
Q. For the purposes of subjective visual evaluation - are there any downloadable images such as a single frame (1:1 screen-shot) of the 1080p video stream transmitted at 5Mbps and 25FPS?
Q. Security-wise ? what kind of encryption (if any) is being used to encrypt the video streams and how interoperable such encryption systems happen to be? For instance, are the encryption keys communicated in accordance with certain protocol/standard or is the process specific to Cisco products?
Q. Has anyone (formally or otherwise) tried to interoperate Cisco Telepresence with other video-streaming solutions (e.g. Conference-XP, VLC, etc.)? If, so what were the results?
Q. Do Cisco Telepresence systems support multicast traffic (e.g. one source / many recipients idiom).
Kind regards, Leon Zadorin.

also, just have 1 more question:
Q. In case if someone (i.e. a 3rd party software developer) was prepared to integrate their own video-streaming solutions (e.g. VLC, Conference XP, AccessGrid, etc.) with Cisco's Telepresence systems - is / will be there any way to obtain necessary technical documents regarding the functionality of Telepresence systems in order to achieve the desired interoperability?
To start with, such interoperability would be done at the very "basic" level: e.g. being able to see Telepresence's video streams in say VLC or AccessGrid or some other system and then may be being able to transmit video streams from VLC or similar in a format that allows Telepresence system to see the 3rd party content.

An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)

An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)
while proview the report i will get this error am using sql server 2008R2,
can u plesae hlep me out for this

<Header>
<Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
<Locale>English (United States)</Locale>
<TimeZone>W. Europe Standard Time</TimeZone>
<Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\Logfiles\ReportServerService__01_30_2015_03_09_32.log</Path>
<SystemName>WEGDACM1</SystemName>
<OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
<OSVersion>6.1.7601</OSVersion>
<ProcessID>4880</ProcessID>
<Virtualization>Hypervisor</Virtualization>
</Header>
rshost!rshost!5e4!01/30/2015-03:09:32:: i INFO: Currently registered url http://+:80/ReportServer_MSSQLSERVEREPORT/ on endpoint 2
rshost!rshost!5e4!01/30/2015-03:09:32:: e ERROR: Failed to register url=http://+:80/Reports/ for endpoint 3, error=b7.
rshost!rshost!5e4!01/30/2015-03:09:32:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportManager.
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
rshost!rshost!65c!01/30/2015-03:09:32:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_MSSQLSERVEREPORT/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportServer\ReportBuilder.
rshost!rshost!1e30!01/30/2015-03:09:32:: i INFO: Derived memory configuration based on physical memory as 16776696 KB
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: i INFO: Recycling the service from the default domain
rshost!rshost!1e30!01/30/2015-03:09:46:: i INFO: Application domain type WindowsService statistics: created: 7, unloaded: 7, failed: 0, timed out: 0.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:46:: i INFO: Appdomain:11 WindowsService_7 started.
library!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
servicecontroller!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
resourceutilities!WindowsService_7!1e30!01/30/2015-03:09:47:: i INFO: Reporting Services starting SKU: Enterprise
servicecontroller!WindowsService_6!1e30!01/30/2015-03:09:47:: i INFO: Service controller exiting.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 unregistered.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 WindowsService_6 unloading.
appdomainmanager!DefaultDomain!1f40!01/30/2015-03:09:47:: i INFO: AppDomain:10 0 pending unload(s)
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Attempting to start service again...
library!DefaultDomain!202c!01/30/2015-08:04:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:25:26:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:26:16:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
The above is my log file pls find it resolve my problem,am trying to add the encryption key to my configuration seetings it will through the error like The profile you were used is temporary profile.

My Macbook pro is very slow in oening folders, it does not open immediatly as you would expect and takes about 30s or more. Please help! Here is the spec: OS X 10.8.3 2,3 Gz Intel Core i7 8GB 1600 MHz DDR3

My Macbook pro is very slow in oening folders, it does not open immediatly as you would expect and takes about 30s or more. Please help!
Here is the spec:
OS X 10.8.3
2,3 Gz Intel Core i7
8GB 1600 MHz DDR3

Did u try to rebuild spotlight index? repair permissions? verify disk and repair if needed?
if now, try it out.

Get this message:Request denied by WatchGuard HTTP proxy. Reason: one or more categories denied helper='WebBlocker.3' details='Streaming Media'

I am able to access most websites but am receiving the following message on others (which are not loading). How do I fix this?
Request denied by WatchGuard HTTP proxy.
Reason: one or more categories denied helper='WebBlocker.3' details='Streaming Media'
Method: GET
Host: au.tv.yahoo.com
Path: /

I am able to access most websites but am receiving the following message on others (which are not loading). How do I fix this?
Request denied by WatchGuard HTTP proxy.
Reason: one or more categories denied helper='WebBlocker.3' details='Streaming Media'
Method: GET
Host: au.tv.yahoo.com
Path: /

Whilst looking at cars I am unable to open out a page which I click ?for more detail. can anyone help ?please

I am looking at used cars and I have found one I'm interested in. However, when I click as instructed to see more detail, the screen goes black.It appears that the address bar ges idle. Can anyone help me please?

Can you provide a link?

Tecra A11-11N does not boot after CPU upgrade

Hi,
I would like to do a processor upgrade for my Tecra A11 11N from the i5-430M to a probably much faster i5.I thought the i5-580M would do, but the laptop did not boot when i installed this processor.
I reverted back to the 430M, did some research on the internet and found out that the 580M has a very high FSB speed and that is what probably made it not to work/incompatible with my machine.
http://ark.intel.com/products/43537/
http://ark.intel.com/products/49653
http://ark.intel.com/products/49652
and also at http://ark.intel.com/
Now i went back to the computer shop,returned the 580M and got an i5-560M as i compared it's specs and saw it would be compatible as it has the same FSB speed with the 430M.
I then later on in the day tried to install this cpu as an upgrade BUT alas!
It STILL WON'T BOOT ALSO.
I was left dumfounded.Processors in the same familly line are supposed to be compatible with one another provided:Lithography, FSB and socket type are similar.
Or what am i missing here?
I have done processor upgrades in many instances for both desktops and laptops and this is the first one that has left me with no words to say!
please offer some help/advice.
Simon
+Message was edited+

I solved this processor upgrade problem on my own.
I did some little research on what limits processor upgradability on computers and i
found out that BIOS was one of the factors that play a key part.
So,i went on a mission
to see if i could upgrade my BIOS and whether it would solve my problem.
I found this link to be very informative:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=66624
I then downloaded the latest BIOS version for my laptop from this link:
http://uk.computers.toshiba-europe.com/innovation/download_bios.jsp
The following link gave me proof that the BIOS update would not bring any problems to my
machine and that there is already someone who had done it and not encountered any problems.
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=62459
Just to make sure that you are on the safe side,before carrying out the procedure to update
your BIOS,make sure you have a fully charged battery in addition to the AC plugged in.A power
outtage during this procedure would instantly kill your machine.
The BIOS installation took less than 3 mins.I copied the executable on the desktop and run it
from there.
On rebooting,the new BIOS was installed.The new BIOS version was 3.40 dated on 05/18/2012 while
the older one was version 2.0 dated on 04/03/2010.
From Intel's website,the i5-430M was released on Q1 2010 while the i5-560M and i5-580M were
released on Q3 2010.
It is pretty obvious that by the time BIOS version 2.0 was release,these two newer processors
had not been released and that explains why they were not being recognized when i installed them.
I finally swapped the 430M with the 560M,assembled back the machine and powered it.
Voil!,the machine booted to it's new life.Everything is as was before!
So far i have not seen any problems even to do with overheating or the cooling fan spinning any
faster that before.It is all the same as before.There is considerable performance gain with the
uprade.I am a software developer and my various development enviroments including compilers,
debuggers,database and deployment servers have all been running way way faster than they were!
I believe the 580M can also work but unfortunately i had returned it back to the shop.
There is no reason for buying new machines when we can upgrade the ones we have.What will
happen to the older ones?This means more electronic waste and so does new machines.Let us try
to make better use of the ones we have a in turn,SAVE OUR ONLY PLANET EARTH FROM GLOBAL WARMING!

Missing driver for Tecra A11

Hello,
I have a Toshiba laptop, model Tecra A11, part No. PTSE3U-05Q01P
I have an issue with the operating system, Windows XP SP3, it doesn't recognize a device from the laptop and shows the Hardware wizard from Windows XP.
The computer worked without problem since the purchase but now ocurred this issue.
We have tried the automatic install provided by Windows with no avail. Windows didn't install the driver.
In the Windows device manager, we see a device with a exclamation mark, as "Unknown device".
In the properties dialog of such device, Windows reports that it have no driver installed.
In the Details tab, the system shows de Device Instance ID: ACPI\IFX0102\4&375529C7&0
In the Toshiba website, in the support section, there are many available downloads, but we don't know which file is the required to solve the problem.
Thanks for any help you can give me.
Best regards,
Carlos
Attachments:
Toshiba_problem02.jpg ‏62 KB
Toshiba_problem03.jpg ‏65 KB
Toshiba_problem04.jpg ‏147 KB
Toshiba_problem04.jpg ‏147 KB

Tecra A11 (PTSE3U-05Q01P)
Has essentially the same spec as this model: Tecra A11-S3540 (PTSE3U-00R00G)
Downloads here.
My guess is that you are missing one of these - maybe both.
TPM Driver for Windows XP
Infineon TPM Software Professional Package for Windows XP/Vista/7 (32/64)
Isn't it time to upgrade to Windows 7?
-Jerry

Tecra A11 - LED backlight issue

I have big pain in my eyes after day of work with Tecra A11 BIOS V1.7 = newest BIOS update. Wenn I bought it there was BIOS 1.4 the same problem with eyes, LED backlight killing my eyes, big pain after day of work. V1.5 and 1.6 are much better (no pain) but new BIOS 1.7 is the same eye-killer as 1.4.
Who is going to help me? Users of this forum?
I want Toshiba people to help me, they sell 1/2 ready product, absolutely bad work! No contacts to Toshiba just this user forum. Is Toshiba interested in my problem with his bad Tecra A11 notebook and stupid BIOS updates? I am really angry, never had such problems with so expensive notebook. So excuse my emoutions I start to hate Toshiba for the extremly bad experience with this Tecra A11. Why should some users of this forum help me? I paid a lot of money to Toshiba, so I want Toshiba people to tell me what they do in their BIOS updates, what stupidity kill my eyes with LCD backlight. How many BIOS updates will be needed to make Tecra A11 working properly for 800 EUR? I will never more buy something from Toshiba.

Thanks Xardas,
One week and we have BIOS Update 1.9 !! = aproximately one update a week. On one side very nice to see that Toshiba takes care of the problems. On other hand why are so many updates needed? Was this Tecra A11 is sold as final product with 1/2 unfunctional BIOS? Wenn I bougt it I had BIOS 1.4 and I tell you there were mistakes even when you went through the menu, so if someone tested it in Toshiba he could see it. So I have really feeling that Toshiba didnot test BIOS properly. That is maybe why they need to update BIOS so oft. They use users as testers, what is for some rare problems OK, but not for common bugs!
Why does not Toshiba describe what exactly is updated in new BIOS version? Where can I find this information, e.g. what is changed between BIOS 1.6 and 1.7 and so on.? I need this information because I really do not know what is going to happen if I update to 1.9 now. I do not want to spend another day with playing with bios, and in worst case to kill my eyes with bug in LED Backlight. So where can I find what is new in BIOS 1.9 ?
My LED Backlighting problem is in BIOS 1.4 and 1.7. You cannot see that something is happening, but after day of work (8 hours) I cannot look at Tecra A11 monitor any more, because of pain iu my eyes. I thing this happens because LEDs in Backlight are too strong and maybe Toshiba uses some kind of pulse modulation to control LED brightnes. So you see brightnees is low (no strong), but in reality maybe you get a strong flasshing LED light into your eyes whitout brain sense for it. So you see normal backlight, but mayby you become very short time strong impulses of LED full intensity into your eyes what you do not notice, only as pain after many hours. This is my explanaition but I didnot measured it. Toshiba sold notebook with Bios 1.4 and immediately updated to 1.5 where this problem was solved. Thats why I was thinking that they know about this problem and they just solved it for ever. But in V1.7 problem ware back, and my eyes took 2 days to recover from pain. So it is really angry bug and I do not know if to stay by Bios 1.6 or to try update to 1.9. I want Toshiba to describe what is going on in BIOS updates.
Maybe this is problem of only my notebook so I will try to contact authoorized service provider, but I would be really positively suprised if they know what to do with it. We will see. But please if you know, answer me where is information what is new in BIOS Updates from Toshiba. Thanks

Detailed specs for Cinema HDD 23-inch -- different from older models?

I am having trouble finding detailed specifications for my new 23" display to use for running X.org. I need to know the timings for each resolution, as simply specifying the resolution does not work. The best I've found is here:
http://www.gubbe.ch/linux/dev-cinema23.php (the gray box at the bottom lists the detailed specs to put in the file)
However, this is for the older model of display with ADC and not DVI. I'm not sure if these will work with the new model, and I'm afraid to try because it used to be that one could really mess up one's display by specifying the wrong timings.
Does anyone know if the specs have changed between the older and newer models, or where I could find new specs, or help setting it up to run under X.org?

Actually, those Modelines from the web site work fine, at least for the generic nv driver. I'm having trouble getting the proprietary one from nVidia to work though. I'm working with them on this: http://www.nvnews.net/vbulletin/showthread.php?t=70630
The problem I am looking at right now are these lines from my latest Xorg.0.log file:
(WW) NVIDIA(0): No connected display devices detected; assuming 1 CRT
(WW) NVIDIA(0): Unable to read EDID for display device CRT-0
(II) NVIDIA(0): NVIDIA GPU GeForce3 Ti 500 at PCI:1:5:0
(--) NVIDIA(0): VideoRAM: 65536 kBytes
(--) NVIDIA(0): VideoBIOS: 03.20.00.16.10
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): Interlaced video modes are not supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce3 Ti 500 at PCI:1:5:0:
(--) NVIDIA(0): CRT-0
(--) NVIDIA(0): CRT-0: 350.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1920x1200"
(II) NVIDIA(0): Virtual screen size determined to be 1920 x 1200
(WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
(WW) NVIDIA(0): from EDID.
(==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
This is my graphics card saying, "I can't see what sort of monitor has been plugged in, so I'm going to assume it's a CRT," and then from there it messes up. It can't tell my monitor is plugged into the DVI port. I'm not sure if this is my monitor's problem or my card's problem. The monitor is plugged in directly--the cable coming from the monitor is plugged right into the DVI port--but I'm not sure if Apple did something silly like, say, converting that DVI connection into an ADC connection before having it interface with the monitor's hardware. Any insight about this would be appreciated.
Anyway, I tried that timing you gave me with the proprietary driver. It didn't work, but I doubt that's because the timing is incorrect, and has more to do with the fact that my card can't seem to see the monitor.

Detailed specs for Lenovo L540 Part number: 20AUA02F00

Dear Lenovo Administrators
I would need the detailed specs for Lenovo L540 Part number: 20AUA02F00
I didnt find them on the Lenovo website, neither on the internet.
There is a brief summary of the specs on Lenovo UK outlet web site, but when calling the sales team they said they don't have more details either.
Thank you in advance for your help.

Hello and welcome,
Going to SUPPORT (above) -> Search by Machine Type Model -> enter "20AUA02F00" I get
ThinkPad L540 20AUA02F00
i5-4200M(2.5GHz), 4GB RAM, 500GB 7200rpm HD, 15in 1366x768 LCD, Intel HD Graphics, CDRW/DVDRW, Intel 802.11abgn wireless, 1Gb Ethernet, UltraNav, Secure Chip, Camera, 6c Li-Ion, Win7 Pro 64
Is that what you've already seen?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

The session variable, NQ_SESSION.OU_ORG, has no value definition.Please have your System Administrator look at the log for more details on this error. (HY000)

Hi All,
I have created a user 'Bitest' and group 'Bi_Test_Group'. Assigned the user to the group and the group to BI consumer role.
I gave access to only procurement and spend catalog folder reports and Dashboards.
When I login to BI Presentation Services with above created user and open any procurement and spent catalog dashboard i am getting below error in every report.
Its BI Apps 7.9.6.3 installation.I gave read access to group to all procurement and spent subject area.
Error Codes: OAMP2OPY:OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 23006] The session variable, NQ_SESSION.OU_ORG, has no value definition.Please have your System Administrator look at the log for more details on this error. (HY000)
SQL Issued: {call NQSGetQueryColumnInfo('SELECT Fact."PO Amount" FROM "Procurement and Spend - Purchase Orders"')}
SQL Issued: SELECT Fact."PO Amount" FROM "Procurement and Spend - Purchase Orders"
Please help me in resolving this issue and getting results on Dashboard.
Thanks in advance
Thanks,
Sandeep

Check your query or connection pool settings etc

Where can I find detailed, systematic HELP for advanced topics relating to Thunderbird?

In moving from XP to Windows 7, I opted for Thunderbird as email client in order to bypass Microsoft's hyper-intrusive Windows Live Mail (I used Outlook Express for years).
I have a very complicated email structure, and it's taken me weeks (seriously) to learn how to replicate it in TBird. Now I'm trying to customize TBird further, but none of the TBird articles/forum Q&A's/Google searches address my questions.
There is no live tech support for TBird, and I'm just about ready to leave it for good. However -- one last effort: where can I find detailed, systematic HELP for advanced topics relating to Thunderbird?
Thanks.

I am no expert, but I don't know of any authoritative reference as to what elements of HTML and CSS are supported in Thunderbird. However, as I believe you appreciate, it's more than just what Thunderbird supports, but one must also think about what is likely to work in other email clients. Keep it simple. Avoid ancient deprecated tags that other email clients may not support, and for similar reasons, avoid cutting edge technology. Remember that recipients using tablets or smartphones won't appreciate large fancy email documents.
The only thing ''guaranteed'' to work in email is plain text. ;-)
If you haven't already discovered it, the Stationery add-on is designed specifically to support OE stationery in Thunderbird. Your existing stationery may "just work" in this add-on. It makes switching between various stationery templates much easier, but I'm not confident that it will affect interpretation of your CSS or HTML coding.
Your code is at least clean and minimal. Most times my involvement with troublesome templates and signatures centres on the horrible bloat and mso custom code generated by Word or Outlook.
Having said that, you and I are mortal enemies, as I don't have much patience with what you aspire to achieve. I specifically don't like background images, nor being obliged to suffer other folks' bizarre choice of typefaces and colours (but your simple 12pt black Tahoma is quite inoffensive. ;-) ) I'm of an age where my tolerance and eyesight are easily offended.
Nonetheless, I'm intrigued by how to parse the tag for the background image, as it doesn't look like a legitimate pathname to a graphics file. Does the background image actually appear as required?

Tecra A11-1EG - cannot access BIOS after setting supervisor password

Hello, I wonder if anyone can help ?
We have just started to put a supervisor password onto our Tecra A11 laptops so our pupils cannot set passwords on the hard drive etc.
To get into the BIOS and set a BIOS password, we press F2 as the machine starts.
We then go into the security option, then supervisor password.
Having entered the password we want to use twice, we press F10 to save etc.
The machine starts ok and goes in to windows without a hitch.
The problem we have now is that we cannot get back into the bios at all.
As the machine starts we press the F2 key as before but unlike previously the screen just remains blank and the 'Toshiba leading Innovation >>>' screen no longer appears.
If we keep our finger on the F" key or keep pressing it the laptop just restarts without ever getting to the BIOS screen where I assume we will get asked for the supervisor password we set earlier?
Is there another key we should be pressing as the laptop starts ?
I should add we have added a supervisor password for the BIOS security screen on three of our laptops and all three have the same issue.
Thanks
Steve

I think this should be useful for you:
http://aps2.toshiba-tro.de/kb0/TSB0B032D0000R01.htm
In some cases you need to press the "INS" key while Toshiba logo appears.
Then a prompt for the Supervisor Password would appear and if the password is certified then the BIOS could be entered by pressing the "F2" key.

Tecra A11-1EJ - more detailed specs help

Similar Messages

Maybe you are looking for