Tecra A11 - No Video via mini DisplayPort
Hi There,
I've recently aquired a Tecra A11 through my company that has two external video ports: VGA and mini DisplayPort.
With my previous laptop I ran two External displays while the laptop was closed and I would like to achieve this with my new Tecra A11. In attempts to achieve the same setup I have purchased a mini DisplayPort to HDMI cable from MonoPrice.com.
Unforunately when trying to use the mini DisplayPort->HDMI cable with the HP monitor I cannot manage to aquire a signal or get anything to display. This happens both when trying to run dual monitors miniDP/VGA and when I only try to run a single external display with the mini DisplayPort to HDMI cable.
I have downloaded the latest Video Drivers for the Tecra A11 but it still cannot see the External Monitor through the mini DisplayPort. Is there something special I have to enable in order for the mini DisplayPort to pump out a signal? or am I missing something here?
Any help would be greatly appreciated as I greatly miss my large monitors.
Regards,
Lando
Hello Lando,
I have exactly the same problem with an S11-160 Tecra laptop. Did you find any solution ??
Thanks
NBd
Similar Messages
-
Tecra A11 - No Video via mini DisplayPort
Hi There,
I just recently purchased a mini DisplayPort -> HDMI cable to be used with my Tecra A11 Notebook. My intention was to run two external displays by running a VGA cable to my LG W2242 Monitor and run the mini-DP to HDMI cable to my HP 2509m Monitor. Unfortunately I cannot get my HP monitor to recognize the Video Signal from the mini DIsplayPort.
I have downloaded the newest drivers for my laptop, but still no luck. Is there anything special I need to do to get the mini DisplayPort to send a Video Signal?
Any help would be greatly appreciated.
Regards,
LandonThe Tecra A11 I have purchased (the A11-00N) only has two external video ports; A mini DisplayPort and a VGA.
I am currently running the Tecra A11 hooked up via the VGA Port to my HP 2509m Monitor. When unplugging the VGA cable and attempting to use just the mini DisplayPort to attach a SINGLE external Monitor I still have trouble getting a signal.
@Andrej - I'm currently attempting to attach 2 external monitors while closing the lid of the built-in display. In any case this should work as the laptop would still be only running 2 displays total.
What troubles me is that the mini DisplayPort doesn't work in a single display setup. I am going to attempt using the cable with a MacBook Pro later today and hopefully it will help in pointing to the root of the problem. -
Re: Tecra A11-10D video memory
Hello all,
I have a Tecra A11-10D and in windows it show's that my graphics card is using 1200MB of RAM as shared video memory. I do not need so much memory for my graphics card, i think 256MB will suffice tacking in account that the onboard card has 64MB of dedicated video memory.
Now on all the computers i know that in bios there is an option to assign RAM to the video card but in the BIOS of my computer I see no such option. I think / hope that an updated bios will give me this option. On the download drivers section I see a new BIOS but I don't want to flash it until i see the BIOS update specifications.
Can any one point me to such a document?
Did anyone have this issue and solved it?
Thanx,
Dan.Hello
As users already wrote the video memory usage is controlled automatically and you cannot change anything. I really don't understand why do you think new BIOS will have some additional options.
I am 100% sure with new BIOS you will not have any new options so if the system is running well dont change anything. BIOS update will be offered mostly to fix some unexpected issues or offer better support for notebooks hardware. It has nothing to do with additional options.
Maybe you are right about video RAM. I also think that every of us should be able to make decision how many memory will be used for video operations but obviously Intel engineers have different opinion about it. -
Tecra A11 - Video/Latest BIOS issues
Hello All,
I just received a Toshiba Tecra A11 the other day which is out of warranty (Refurb). When I got the laptop there was an issue where the picture was displayed at 1024x768 and off centre (In BIOS). The image was 1-2cm off screen to the left, with about 5-6cm black space to the right of the picture, the bottom 2-3 cm's of the picture were also off the bottom of the screen.
I installed Ubuntu Studio initially and attempted to force the display to a widescreen resolution. I didn't have any luck, I also installed Win7 but still with the latest drivers I had no luck.
This was strange because BIOS was displayed the same way so naturally I decided to upgrade to the latest BIOS version. The BIOS on the laptop was quite old (End of 2009).
I downloaded the BIOS update from Toshiba's web site, and ran the update.
The new BIOS was installed and the machine rebooted.
However there was no picture displayed on the LCD panel, windows did successfully boot, if I connect an external monitor to the laptop I get picture. When starting the laptop the LCD backlight does light up.
My question is: What can I do to resolve this issue? Is there a BIOS recovery or downgrade tool available? Is it possible to reflash the bios? What is recommended?
Thanks.> The new BIOS was installed and the machine rebooted.
> However there was no picture displayed on the LCD panel, windows did successfully boot, if I connect an external monitor to the laptop I get picture. When starting the laptop the LCD backlight does light up.
Does this mean that everything is ok using external monitor?
Can you access the BIOS pressing F2 and can you set it to default settings?
Usually you can switch between external and internal display using the key combination FN + F5. Does it work? -
Tecra A11-11N does not boot after CPU upgrade
Hi,
I would like to do a processor upgrade for my Tecra A11 11N from the i5-430M to a probably much faster i5.I thought the i5-580M would do, but the laptop did not boot when i installed this processor.
I reverted back to the 430M, did some research on the internet and found out that the 580M has a very high FSB speed and that is what probably made it not to work/incompatible with my machine.
http://ark.intel.com/products/43537/
http://ark.intel.com/products/49653
http://ark.intel.com/products/49652
and also at http://ark.intel.com/
Now i went back to the computer shop,returned the 580M and got an i5-560M as i compared it's specs and saw it would be compatible as it has the same FSB speed with the 430M.
I then later on in the day tried to install this cpu as an upgrade BUT alas!
It STILL WON'T BOOT ALSO.
I was left dumfounded.Processors in the same familly line are supposed to be compatible with one another provided:Lithography, FSB and socket type are similar.
Or what am i missing here?
I have done processor upgrades in many instances for both desktops and laptops and this is the first one that has left me with no words to say!
please offer some help/advice.
Simon
+Message was edited+I solved this processor upgrade problem on my own.
I did some little research on what limits processor upgradability on computers and i
found out that BIOS was one of the factors that play a key part.
So,i went on a mission
to see if i could upgrade my BIOS and whether it would solve my problem.
I found this link to be very informative:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=66624
I then downloaded the latest BIOS version for my laptop from this link:
http://uk.computers.toshiba-europe.com/innovation/download_bios.jsp
The following link gave me proof that the BIOS update would not bring any problems to my
machine and that there is already someone who had done it and not encountered any problems.
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=62459
Just to make sure that you are on the safe side,before carrying out the procedure to update
your BIOS,make sure you have a fully charged battery in addition to the AC plugged in.A power
outtage during this procedure would instantly kill your machine.
The BIOS installation took less than 3 mins.I copied the executable on the desktop and run it
from there.
On rebooting,the new BIOS was installed.The new BIOS version was 3.40 dated on 05/18/2012 while
the older one was version 2.0 dated on 04/03/2010.
From Intel's website,the i5-430M was released on Q1 2010 while the i5-560M and i5-580M were
released on Q3 2010.
It is pretty obvious that by the time BIOS version 2.0 was release,these two newer processors
had not been released and that explains why they were not being recognized when i installed them.
I finally swapped the 430M with the 560M,assembled back the machine and powered it.
Voil!,the machine booted to it's new life.Everything is as was before!
So far i have not seen any problems even to do with overheating or the cooling fan spinning any
faster that before.It is all the same as before.There is considerable performance gain with the
uprade.I am a software developer and my various development enviroments including compilers,
debuggers,database and deployment servers have all been running way way faster than they were!
I believe the 580M can also work but unfortunately i had returned it back to the shop.
There is no reason for buying new machines when we can upgrade the ones we have.What will
happen to the older ones?This means more electronic waste and so does new machines.Let us try
to make better use of the ones we have a in turn,SAVE OUR ONLY PLANET EARTH FROM GLOBAL WARMING! -
HDTV won't display as mirror or extra display via mini-dvi to HDMI
Hi
I have a MacBook running 10.5.7 connected to a 1080P-capable Toshishba TV (model 42XV555). I also tried this with 10.5.6 with same results.
They are connected via a "shuttlez" mini-dvi to hdmi dongle and then via a "wegi" hdmi to hmdi cable.
The TV has three HDMI inputs, one designated for computer input via HDMI with a separate input for analogue sound.
THE MB recognizes the TV and displays a separate Toshiba-specific control panel with display control panel is up. It defaults to 1600x90 and 60Hz. The Macbook adjusts every time the tv is connected - there is communication - flashing screen, MB screen re-adjusts.
S-video works fine, via mini-dvi to s-video donglr, then svideo cable.
It has worked twice with the MB and connected with HDMI - just twice. I have spent hour after hour tweaking resolutions, re-booting, changing cables, HDMI ports on the TV etc! When it worked I could mirror and use the screen as a separate, larger display. It worked in clam-shell mode too.
My question is - are there any know problems getting this combination to work (ie MB, mini-dvi to HDMI)? It can work but I am missing some knowledge on the exact combination required.
What are the optimum settings to have this TV display HD from the MB, or come to that any HD 1080p-capable TV??I'm attempting to connect my MB to a plasma 50 inch Panasonic TV, and am about to purchase the necessary cables from www.monoprice.com.
I've discovered so far that the HDMI connection directly between the MB and the TV (using the appropriate mini DVI adapter of course - product # 4852 at monochrome.com and an Apple HDMI cable which I'll return to get a better price at monochrome) transmits only video/pictures but not audio.
So far, an old, short RCA (red/white) 2-way audio test cable (again using the appropriate adapter to connect to the headphone jack on the MB) does not transmit audio directly to the TV.
1) Could audio be transmitted from the MB to the TV using a "Coax (RCA) to Optical Toslink Digital Audio Converter" (product ID # 2947 at www.monochrome.com) to connect directly to the TV (in which case, what digital audio cable would I need to connect the converter to the TV)? And if so, would it be stereo or mono?
OR...
2) Should I wait until I get my Onkyo surround sound system (later this week) to see if the RCA cable will transmit directly from the MB to the sound system?
Thanks. -
Toshiba tecra a11-17c refusing to boot from LAN
Hello
I am working on a Toshiba tecra a11-17c. We currently have about 18 of the same laptop and the person who originally built the computers has left the office we are currently working at.
The issue I am have is that I want to boot the computer from lan and do a windows 7 installation on the laptop but I keep getting the error "Media test failure, check cable"
I know the cable is working because I was able to build a Toshiba satellite pro l20 perfectly fine
The other Toshiba tecra a11-17c laptops have the same issue when trying to rebuild them too
I am fully able to log into a Toshiba tecra a11-17c and connect to the internet via the same network cable and port when in windows.
I have also tried to swap the hard drive with a different tecra a11-17c but it just kept getting a blue screen as soon as the windows flag appeared.
I then tried a format of the hard drive and a reset to default of the bios settings as suggested in a different forum.
I then tried to clone a fully working hard drive from a different fully working tecra a11-17c and it just dose the blue screen as stated above.
I then used an old windows XP recovery disk for the tecra a11-17c it did the build fine no issues then when it came to build to windows but as stated above it just dose a blue screen the same as windows 7.
Now I have no idea what to do but to believe it is something Toshiba has done with the tecra a11-17c range because its the same issue for all 18 of the tecra a11-17c laptops I have here.
Any way I am at a loss and have no idea what to do it seems to be something as simple as the network card need to be turned on during the boot phase but I can not find anything in the bios.I'm sorry but I have no experience doing what your attempting to do. However, for your information, this site is for U.S. models only and I would suggest you also post in the appropriate regional Toshiba Support forum to get better suggestions. Good luck
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit -
IMac 27" (Late 2009): getting audio to HDMI receiver via mini DisplayPort
I just got my first iMac 27" and I'm in the process of integrating it into my home theater system. Here is my setup:
iMac 27" connected to HDMI receiver (Yamaha RX-V1800) via mini DosplayPort, using miniDP-to-HDMI adapter + HDMI cable
Optoma HD20 video projector connected to HDMI receiver (HDMI out) via HDMI cable
I have Windows 7 installed via Bootcamp 3.2, so that I can take advantage of Windows Media Center. With the above setup, I am not getting audio or video signal to my receiver and video projector when I'm using Windows 7. However, when I am in OS X environment, I can get both video and audio signal to my receiver and video projector, and either mirror or extend my video diplay. When I do plug in my iMac straight into my video projector or LCD monitor with built-in speakers while in Windows 7, I get both audio and video output. So why doesn't it work -- and only under Windows 7 -- when the signal goes through the receiver?
My immediate thought was that it must be something about the receiver, but since the setup creates no problem under OS X I don't think it is. Could it perhaps be the Windows driver for mini DisplayPort, because it looks like iMac is not 'recognizing' my receiver and therefore not establishing connection? Is there a driver of fix available that takes care of this problem?
Thanks!I've tried a few times and it hasn't worked so far...
23" Cinema Display (ADC) connected to Apple's ADC to DVI adapter/power box then connected to Apple's DVI to mini Display Port adapter.
Trying to output extended desktop from iMac to 23" Cinema Display.
No signal or anything on the 2nd monitor so far.
USB port on Cinema Display works with the setup.
Checked system updates and all up to date as of 01-10-2010.
OS X 10.6.2 build 10C2234 -
Getting no sound from TV after connecting Macair via mini DP to HDMI port....pls help
I've tried connecting my 2011 Macair to my LED tv via mini DP to HDMI port. The video works fine but there is no sound. I tried opening network preferences and went to the sound section but it does not show my TV to be selected as an output option. Please help!!!!!!
Did you try on another device, like a computer monitor? To verify the problem is not with the adapter or cable.
Off course you switched on the external screen using WinKey+P? -
Tecra A11 - Bios Update offered - necessary?
Hi - I've just been offered a BIOS Update for my Tecra A11-17N (Via Toshiba Service Station) - BIOS Update v3.10....
Clicking on the update doesn't offer any details as to what it contains/fixes/improves - it just says basically "install, and computer will re-boot a few times".
My Tecra is running perfectly - no issues at all. Should I ignore this?Hello
> My Tecra is running perfectly - no issues at all. Should I ignore this?
Youre right. In this case you can ignore this update because everything works perfectly.
BIOS update is always a little bit risky so it shouldnt be done just for fun. It should only be done if its really necessary and in your case you dont need it.
So have fun with your Tecra A11 and you can forget the update :) -
[SOLVED] - Package xf86-video-via is missing from repositories!
Hi,
I have a VIA card as follows:
VGA Compatible Controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01)
My X doesn't work except in VESA mode. But in Vesa mode, when I play videos in mplayer, I can't fullscreen them.
When I checked the sample xorg.conf files mentioned in the Xorg wiki, I find that I am advised to use the xf86-video-via package.
But the package xf86-video-via is missing from repositories!
pacman -Ss xf86-video-via doesn't give results!
Please help.
Thanks.
Last edited by msadiq (2008-12-27 04:18:45)Sorry for the long wait, I havent got the time to test but I did uncomment the RenderAccel and that didnt do anything.
my Xorg.0.log:
=================================================================
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux hp-2133 2.6.28-ARCH #1 SMP PREEMPT Sun Jan 25 10:13:11 UTC 2009 i686
Build Date: 17 December 2008 08:20:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 27 21:07:16 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "HP LCD"
(**) | |-->Device "Via Chrome9"
(**) |-->Input Device "HP Keyboard"
(**) |-->Input Device "HP Touchpad"
(**) Option "AutoAddDevices" "false"
(**) Not automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d5fe0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@1:0:0) VIA Technologies, Inc. CN896/VN896/P4M900 [Chrome 9 HC] rev 1, Mem @ 0xc0000000/0, 0xfc000000/0, BIOS @ 0x????????/65536
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[37] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[38] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[39] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "xtt"
(WW) Warning, couldn't open module xtt
(II) UnloadModule: "xtt"
(EE) Failed to load module "xtt" (module does not exist, 0)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(WW) Warning, couldn't open module record
(II) UnloadModule: "record"
(EE) Failed to load module "record" (module does not exist, 0)
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "openchrome"
(II) Loading /usr/lib/xorg/modules/drivers//openchrome_drv.so
(II) Module openchrome: vendor="http://openchrome.org/"
compiled for 1.5.3, module version = 0.2.903
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266, KM400/KN400,
K8M800/K8N800, PM800/PM880/CN400, P4M800Pro/VN800/CN700,
K8M890/K8N890, P4M900/VN896/CN896, CX700/VX700, P4M890, VX800
(II) Primary Device is: PCI 01@00:00:0
(!!) VIA Technologies does not support this driver in any way.
(!!) For support, please refer to http://www.openchrome.org/.
(!!) (development build, at svn revision 726)
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[37] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[38] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[39] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) CHROME(0): VIAPreInit
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(II) CHROME(0): VIAGetRec
(**) CHROME(0): Depth 24, (--) framebuffer bpp 32
(==) CHROME(0): RGB weight 888
(==) CHROME(0): Default visual is TrueColor
(--) CHROME(0): Chipset: P4M900/VN896/CN896
(--) CHROME(0): Chipset revision: 0
(--) CHROME(0): Probed amount of VideoRAM = 262144 kB
(II) CHROME(0): Setting up default chipset options.
(II) CHROME(0): VIASetupDefaultOptions
(II) CHROME(0): Reading config file...
(**) CHROME(0): Option "AccelMethod" "XAA"
(**) CHROME(0): Option "PanelSize" "1024x600"
(**) CHROME(0): Option "EnableAGPDMA" "False"
(II) CHROME(0): Starting to parse config file options...
(==) CHROME(0): Shadow framebuffer is disabled.
(==) CHROME(0): Hardware acceleration is enabled.
(**) CHROME(0): Using XAA acceleration architecture.
(==) CHROME(0): Using hardware two-color cursors and software full-color cursors.
(==) CHROME(0): GPU virtual command queue will be enabled.
(==) CHROME(0): DRI IRQ will be enabled if DRI is enabled.
(**) CHROME(0): AGP DMA will be disabled if DRI is enabled.
(==) CHROME(0): PCI DMA will not be used for XV image transfer if DRI is enabled.
(==) CHROME(0): Will not enable VBE modes.
(==) CHROME(0): VBE VGA register save & restore will not be used
if VBE modes are enabled.
(==) CHROME(0): Xv Bandwidth check is enabled.
(==) CHROME(0): Will not impose a limit on video RAM reserved for DRI.
(==) CHROME(0): Will try to allocate 32768 kB of AGP memory.
(==) CHROME(0): Digital output bus width is 12 bits.
(==) CHROME(0): DVI Center is disabled.
(II) CHROME(0): ViaPanelGetNativeModeFromOption
(**) CHROME(0): Panel mode index is 13
(**) CHROME(0): Selected Panel Size is 1024x600
(==) CHROME(0): Panel will not be forced.
(==) CHROME(0): TV dotCrawl is disabled.
(==) CHROME(0): TV deflicker is set to 0.
(==) CHROME(0): No default TV type is set.
(==) CHROME(0): No default TV output signal type is set.
(II) CHROME(0): VIAMapMMIO
(--) CHROME(0): mapping MMIO @ 0xfc000000 with size 0x9000
(--) CHROME(0): mapping BitBlt MMIO @ 0xfc200000 with size 0x200000
(II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) CHROME(0): Will not print VGA registers.
(==) CHROME(0): Will not scan I2C buses.
(II) CHROME(0): ...Finished parsing config file options.
(--) CHROME(0): Detected Hewlett Packard 2133 Mini-Note.
(II) CHROME(0): Detected MemClk 8
(II) CHROME(0): ViaGetMemoryBandwidth
(II) CHROME(0): Detected TV standard: PAL.
(==) CHROME(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) CHROME(0): ViaI2CInit
(II) CHROME(0): ViaI2CBus1Init
(II) CHROME(0): I2C bus "I2C bus 1" initialized.
(II) CHROME(0): ViaI2cBus2Init
(II) CHROME(0): I2C bus "I2C bus 2" initialized.
(II) CHROME(0): ViaI2CBus3Init
(II) CHROME(0): I2C bus "I2C bus 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) CHROME(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
(II) CHROME(0): I2C device "I2C bus 1:ddc2" removed.
(II) CHROME(0): ViaOutputsDetect
(II) CHROME(0): Enabling panel from PCI-subsystem ID information.
(II) CHROME(0): Will not try to detect TV encoder.
(II) CHROME(0): ViaOutputsSelect
(II) CHROME(0): ViaOutputsSelect: X Configuration: 0x00
(II) CHROME(0): ViaOutputsSelect: BIOS Initialised register: 0x07
(II) CHROME(0): ViaOutputsSelect: Panel.
(II) CHROME(0): ViaPanelPreInit
(II) CHROME(0): ViaPanelGetNativeDisplayMode
(II) CHROME(0): NativeModeIndex: 13
(II) CHROME(0): ViaModesAttach
(II) CHROME(0): ViaModesMonitorFixup - Adjusted HSync.lo to 29.677456
(II) CHROME(0): ViaModesMonitorFixup - Adjusted HSync.hi to 74.904167
(II) CHROME(0): HP LCD: Using hsync range of 29.68-74.90 kHz
(II) CHROME(0): HP LCD: Using vrefresh range of 55.00-90.00 Hz
(II) CHROME(0): Clock range: 20.00 to 230.00 MHz
(II) CHROME(0): ViaValidMode: Validating 640x350 (31500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 640x400 (31500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 720x400 (35500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 640x480 (25175)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 640x480 (31500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 640x480 (31500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 640x480 (36000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 800x600 (36000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 800x600 (40000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 800x600 (50000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 800x600 (49500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 800x600 (56300)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1024x768 (44900)
(II) CHROME(0): Not using default mode "1024x768" (interlace mode not supported)
(II) CHROME(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1024x768 (65000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1024x768 (75000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1024x768 (78750)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1024x768 (94500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1152x864 (108000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1280x960 (108000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1280x960 (148500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1280x1024 (108000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1280x1024 (135000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1280x1024 (157500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1600x1200 (162000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1600x1200 (175500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1600x1200 (189000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1600x1200 (202500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1600x1200 (229500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1792x1344 (204800)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1856x1392 (218300)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 832x624 (57284)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "832x624" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1152x864 (81620)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1152x864 (96770)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1152x864 (104990)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1152x864 (119650)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1152x864 (121500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1152x864 (143470)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1360x768 (72000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1360x768" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1360x768 (84750)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1360x768" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1400x1050 (122000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1400x1050 (145060)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1400x1050 (155800)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1400x1050 (179260)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1440x900 (106500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1440x900" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1600x1024 (103125)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1680x1050 (119000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1680x1050 (146250)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1680x1050 (174000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1680x1050 (187000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1680x1050 (214750)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1920x1080 (138500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1920x1080" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "960x540" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1920x1200 (154000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1920x1200" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 640x480 (25312)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 720x480 (26591)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 720x576 (32663)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 800x480 (40000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 800x600 (39822)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 848x480 (33750)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 856x480 (31704)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 1024x512 (41164)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 1024x576 (46981)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 1024x600 (48960)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 1024x768 (65028)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) CHROME(0): ViaValidMode: Validating 1152x864 (81613)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) CHROME(0): ViaValidMode: Validating 1280x768 (81135)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1280x768" (exceeds panel dimensions)
(II) CHROME(0): ViaValidMode: Validating 1280x720 (74600)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1280x720" (exceeds panel dimensions)
(II) CHROME(0): ViaValidMode: Validating 1280x960 (108280)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) CHROME(0): ViaValidMode: Validating 1280x1024 (108280)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) CHROME(0): ViaValidMode: Validating 1360x768 (85500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1360x768" (exceeds panel dimensions)
(II) CHROME(0): ViaValidMode: Validating 1366x768 (85860)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1366x768" (exceeds panel dimensions)
(II) CHROME(0): ViaValidMode: Validating 1400x1050 (122726)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) CHROME(0): ViaValidMode: Validating 1440x900 (106470)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1440x900" (exceeds panel dimensions)
(II) CHROME(0): ViaValidMode: Validating 1600x1200 (161793)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) CHROME(0): ViaValidMode: Validating 1920x1080 (172900)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1920x1080" (exceeds panel dimensions)
(II) CHROME(0): ViaValidMode: Validating 1024x600 (48960)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 1024x576 (46981)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 1024x512 (41164)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 800x600 (56300)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 800x600 (49500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 800x600 (50000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 800x600 (40000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 800x600 (39822)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 800x600 (36000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 720x576 (32663)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 856x480 (31704)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 848x480 (33750)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 800x480 (40000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 720x480 (26591)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 640x480 (36000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 640x480 (31500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 640x480 (31500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 640x480 (25312)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 640x480 (25175)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 720x400 (35500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 640x400 (31500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 640x350 (31500)
(II) CHROME(0): ViaSecondCRTCModeValid
(--) CHROME(0): Virtual size is 1024x600 (pitch 1024)
(**) CHROME(0): *Default mode "1024x600": 49.0 MHz (scaled from 0.0 MHz), 37.3 kHz, 60.0 Hz
(II) CHROME(0): Modeline "1024x600"x60.0 48.96 1024 1064 1168 1312 600 601 604 622 -hsync +vsync (37.3 kHz)
(**) CHROME(0): Default mode "1024x576": 47.0 MHz (scaled from -0.0 MHz), 35.8 kHz, 60.0 Hz
(II) CHROME(0): Modeline "1024x576"x60.0 46.98 1024 1064 1168 1312 576 576 579 597 -hsync +vsync (35.8 kHz)
(**) CHROME(0): Default mode "1024x512": 41.2 MHz (scaled from 0.0 MHz), 31.8 kHz, 59.8 Hz
(II) CHROME(0): Modeline "1024x512"x59.8 41.16 1024 1056 1160 1296 512 512 515 531 -hsync +vsync (31.8 kHz)
(**) CHROME(0): Default mode "800x600": 56.3 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.1 Hz
(II) CHROME(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(**) CHROME(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) CHROME(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(**) CHROME(0): Default mode "800x600": 50.0 MHz (scaled from -0.0 MHz), 48.1 kHz, 72.2 Hz
(II) CHROME(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(**) CHROME(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
(II) CHROME(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) CHROME(0): Default mode "800x600": 39.8 MHz (scaled from -0.0 MHz), 37.7 kHz, 60.0 Hz
(II) CHROME(0): Modeline "800x600"x60.0 39.82 800 840 968 1056 600 600 604 628 +hsync +vsync (37.7 kHz)
(**) CHROME(0): Default mode "800x600": 36.0 MHz (scaled from -0.0 MHz), 35.2 kHz, 56.2 Hz
(II) CHROME(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) CHROME(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) CHROME(0): Modeline "720x576"x60.0 32.66 720 744 816 912 576 576 579 597 -hsync +vsync (35.8 kHz)
(**) CHROME(0): Default mode "856x480": 31.7 MHz (scaled from -0.0 MHz), 29.8 kHz, 60.0 Hz
(II) CHROME(0): Modeline "856x480"x60.0 31.70 856 872 960 1064 480 480 483 497 -hsync +vsync (29.8 kHz)
(**) CHROME(0): Default mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
(II) CHROME(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 485 493 517 +hsync +vsync (31.0 kHz)
(**) CHROME(0): Default mode "800x480": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
(II) CHROME(0): Modeline "800x480"x60.3 40.00 800 832 960 1056 480 541 545 628 -hsync +vsync (37.9 kHz)
(**) CHROME(0): Default mode "720x480": 26.6 MHz (scaled from -0.0 MHz), 29.7 kHz, 59.7 Hz
(II) CHROME(0): Modeline "720x480"x59.7 26.59 720 736 808 896 480 480 483 497 -hsync +vsync (29.7 kHz)
(**) CHROME(0): Default mode "640x480": 36.0 MHz (scaled from -0.0 MHz), 43.3 kHz, 85.0 Hz
(II) CHROME(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(**) CHROME(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) CHROME(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(**) CHROME(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
(II) CHROME(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(**) CHROME(0): Default mode "640x480": 25.3 MHz (scaled from -0.0 MHz), 31.6 kHz, 60.3 Hz
(II) CHROME(0): Modeline "640x480"x60.3 25.31 640 656 752 800 480 489 491 525 -hsync -vsync (31.6 kHz)
(**) CHROME(0): Default mode "640x480": 25.2 MHz (scaled from -0.0 MHz), 31.5 kHz, 59.9 Hz
(II) CHROME(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) CHROME(0): Default mode "720x400": 35.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.0 Hz
(II) CHROME(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
(**) CHROME(0): Default mode "640x400": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.1 Hz
(II) CHROME(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
(**) CHROME(0): Default mode "640x350": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.1 Hz
(II) CHROME(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
(==) CHROME(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.2.1
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) CHROME(0): VIAUnmapMem
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[37] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[38] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[39] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) CHROME(0): VIAScreenInit
(II) CHROME(0): VIAMapFB
(--) CHROME(0): mapping framebuffer @ 0xc0000000 with size 0x10000000
(--) CHROME(0): Frame buffer start: 0xa7771000, free start: 0x258000 end: 0x10000000
(II) CHROME(0): VIAMapMMIO
(--) CHROME(0): mapping MMIO @ 0xfc000000 with size 0x9000
(--) CHROME(0): mapping BitBlt MMIO @ 0xfc200000 with size 0x200000
(II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) CHROME(0): VIASave
(II) CHROME(0): Primary
(II) CHROME(0): Crtc...
(II) CHROME(0): TVSave...
(II) CHROME(0): VIAWriteMode
(II) CHROME(0): ViaModeSet
(II) CHROME(0): Name: 1024x600
(II) CHROME(0): Clock: 48960
(II) CHROME(0): VRefresh: 59.995293
(II) CHROME(0): HSync: 37.317074
(II) CHROME(0): HDisplay: 1024
(II) CHROME(0): HSyncStart: 1064
(II) CHROME(0): HSyncEnd: 1168
(II) CHROME(0): HTotal: 1312
(II) CHROME(0): HSkew: 0
(II) CHROME(0): VDisplay: 600
(II) CHROME(0): VSyncStart: 601
(II) CHROME(0): VSyncEnd: 604
(II) CHROME(0): VTotal: 622
(II) CHROME(0): VScan: 0
(II) CHROME(0): Flags: 6
(II) CHROME(0): CrtcHDisplay: 0x400
(II) CHROME(0): CrtcHBlankStart: 0x400
(II) CHROME(0): CrtcHSyncStart: 0x428
(II) CHROME(0): CrtcHSyncEnd: 0x490
(II) CHROME(0): CrtcHBlankEnd: 0x520
(II) CHROME(0): CrtcHTotal: 0x520
(II) CHROME(0): CrtcHSkew: 0x0
(II) CHROME(0): CrtcVDisplay: 0x258
(II) CHROME(0): CrtcVBlankStart: 0x258
(II) CHROME(0): CrtcVSyncStart: 0x259
(II) CHROME(0): CrtcVSyncEnd: 0x25c
(II) CHROME(0): CrtcVBlankEnd: 0x26e
(II) CHROME(0): CrtcVTotal: 0x26e
(II) CHROME(0): ViaModeSecondCRTC
(II) CHROME(0): ViaPanelScale: 1024,600 -> 1024,600
(II) CHROME(0): mode: 0x8808110
(II) CHROME(0): mode->name: 0x880a770
(II) CHROME(0): mode->name: 1024x600
(II) CHROME(0): ViaSecondCRTCSetMode
(II) CHROME(0): Setting up 1024x600
(II) CHROME(0): ViaSetSecondaryFIFO
(II) CHROME(0): ViaSetSecondaryDotclock to 0x508c01
(II) CHROME(0): ViaSetUseExternalClock
(II) CHROME(0): ViaSecondDisplayChannelEnable
(II) CHROME(0): ViaDisplayDisableCRT
(II) CHROME(0): ViaDisplayDisableSimultaneous
(II) CHROME(0): VIAAdjustFrame
(II) CHROME(0): VIAAdjustFrame
(II) CHROME(0): - Blanked
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
(EE) [drm] drmOpen failed.
(EE) CHROME(0): [dri] DRIScreenInit failed. Disabling DRI.
(II) CHROME(0): - Visuals set up
(II) CHROME(0): VIAInternalScreenInit
(II) CHROME(0): - B & W
(II) CHROME(0): CursorStart: 0xffc0000
(II) CHROME(0): Using 1800 lines for offscreen memory.
(II) CHROME(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
8x8 color pattern filled rectangles
Solid Lines
Dashed Lines
Image Writes
Setting up tile and stipple cache:
32 128x128 slots
20 256x256 slots
32 8x8 color pattern slots
(==) CHROME(0): Backing store disabled
(II) CHROME(0): - Backing store set up
(II) CHROME(0): - SW cursor set up
(II) CHROME(0): VIAHWCursorInit
(II) CHROME(0): - Def Color map set up
(II) CHROME(0): VIALoadPalette
(II) CHROME(0): VIALoadRgbLut
(II) CHROME(0): - Palette loaded
(II) CHROME(0): DPMS enabled
(II) CHROME(0): - DPMS set up
(II) CHROME(0): - Color maps etc. set up
(II) CHROME(0): direct rendering disabled
(II) CHROME(0): Benchmarking video copy. Less time is better.
(--) CHROME(0): Timed libc YUV420 copy... 1813105. Throughput: 522.2 MiB/s.
(--) CHROME(0): Timed kernel YUV420 copy... 1789621. Throughput: 529.1 MiB/s.
(--) CHROME(0): Timed SSE YUV420 copy... 960929. Throughput: 985.3 MiB/s.
(--) CHROME(0): Timed MMX YUV420 copy... 1706519. Throughput: 554.8 MiB/s.
(--) CHROME(0): Ditching 3DNow! YUV420 copy. Not supported by CPU.
(--) CHROME(0): Timed MMX2 YUV420 copy... 1029823. Throughput: 919.4 MiB/s.
Freed 9834496 (pool 1)
(--) CHROME(0): Using SSE YUV42X copy for video.
(WW) CHROME(0): [XvMC] XvMC is not supported on this chipset.
(WW) CHROME(0): Option "RenderAccel" is not used
(II) CHROME(0): - Done
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(**) Option "CoreKeyboard"
(**) HP Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) HP Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) HP Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) HP Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "se"
(**) HP Keyboard: XkbLayout: "se"
(**) Option "CustomKeycodes" "off"
(**) HP Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "Auto"
(**) Option "Device" "/dev/input/mice"
(II) HP Touchpad: Setting mouse protocol to "ExplorerPS/2"
(**) HP Touchpad: Device: "/dev/input/mice"
(**) HP Touchpad: Protocol: "Auto"
(**) Option "CorePointer"
(**) HP Touchpad: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons"
(**) HP Touchpad: Emulate3Buttons, Emulate3Timeout: 50
(**) HP Touchpad: ZAxisMapping: buttons 4 and 5
(**) HP Touchpad: Buttons: 9
(**) HP Touchpad: Sensitivity: 1
(II) evaluating device (HP Keyboard)
(II) XINPUT: Adding extended input device "HP Keyboard" (type: KEYBOARD)
(II) evaluating device (HP Touchpad)
(II) XINPUT: Adding extended input device "HP Touchpad" (type: MOUSE)
(II) HP Touchpad: Setting mouse protocol to "ExplorerPS/2"
(II) HP Touchpad: ps2EnableDataReporting: succeeded
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device Video Bus
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device Macintosh mouse button emulation
(EE) config/hal: NewInputDeviceRequest failed
===============================================================
And my glxinfo:
===============================================================
name of display: :0.0
display: :0 screen: 0
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: S3G
client glx version string: 1.4
client glx extensions:
GLX_SGI_make_current_read, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_ARB_get_proc_address, GLX_EXT_texture_from_pixmap,
GLX_MESA_copy_sub_buffer
GLX version: 1.2
GLX extensions:
GLX_SGI_make_current_read, GLX_SGIX_fbconfig, GLX_EXT_texture_from_pixmap,
GLX_MESA_copy_sub_buffer
OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
OpenGL version string: 1.4 (2.1 Mesa 7.2)
OpenGL extensions:
GL_EXT_texture_env_add, GL_ARB_multitexture, GL_ARB_transpose_matrix,
GL_ARB_texture_env_add, GL_ARB_texture_cube_map,
GL_ARB_texture_compression, GL_ARB_texture_border_clamp,
GL_ARB_point_parameters, GL_ARB_texture_env_combine,
GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
GL_ARB_texture_mirrored_repeat, GL_ARB_depth_texture, GL_ARB_shadow,
GL_ARB_shadow_ambient, GL_ARB_window_pos, GL_ARB_occlusion_query,
GL_ARB_texture_non_power_of_two, GL_ARB_point_sprite,
GL_EXT_texture_rectangle, GL_EXT_abgr, GL_EXT_blend_color,
GL_EXT_texture3D, GL_EXT_packed_pixels, GL_SGIS_texture_lod,
GL_EXT_rescale_normal, GL_EXT_vertex_array, GL_SGIS_generate_mipmap,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_border_clamp,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_point_parameters,
GL_EXT_draw_range_elements, GL_EXT_bgra, GL_EXT_separate_specular_color,
GL_EXT_secondary_color, GL_EXT_multi_draw_arrays, GL_EXT_fog_coord,
GL_EXT_texture_env_combine, GL_EXT_blend_func_separate,
GL_EXT_stencil_wrap, GL_NV_texgen_reflection, GL_EXT_texture_lod_bias,
GL_NV_blend_square, GL_NV_texture_rectangle, GL_EXT_shadow_funcs,
GL_ATI_texture_env_combine3, GL_SGI_color_matrix,
GL_EXT_texture_edge_clamp
2 GLX Visuals
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x21 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x3b 32 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
32 GLXFBConfigs:
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x3c 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x3d 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x3e 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 -
Tecra A11-17V can't connect to WLan
I have a Tecra A11-17V 15.6 inches and the problemis that i cant get WLan conection at home.
With all other devices I come in my WLAN and the Tecra also in others, but not in mine.
It is a WPA2-PSK with AES and 128-bit encryption.
What can be causing this?
Best regardsIs it not possible with this settings?
Obviously your WLan router encryption settings are not supported by the WLan card and therefore you have to change the encryption!
As suggested by Jeffrey; try another settings.
For example:
Network Authentication: WPA2-PSK
WPA Encryption: TKIP
Encryption Strength: 64-bit -
TECRA A11 - low sound quality earphone to AUX
Tecra A11 provides *low sound quality* (iTunes) connecting with my hifi system *via earphone out to AUX* in. An Apple MacBook connected in the same way does much better. Any idea how could enhance the quality? Thanks in advance!
Hmmmmm...... have you tried to change sound settings, player equaliser?
Open control panel and check if there is Realtek sound manager (Realtek soundcard) and play a little bit with sound effects settings. -
2009 24-inch iMac 3.06GHz (EMC no. 2267). I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade? I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.
You can connect the audio from your iMac to your TV using a mini jack (like headphones plug) to rca (regular red and white audio connectors used on every TV,DVD, etc) cable.
On your TV, you need to be able to set the audio for the HDMI input you will use to "analog" and connect the rca end of the cable to the analog inputs on your TV. -
MacBook to TV via mini-DVI to HDMI?
I bought these items to connect my macbook to my Sharp Aquos 52" LC52D85U 120Hz 1080p LCD HDTV:
644 3.5mm Stereo Plug/Plug M/M Cable - 6ft,
4029 High Speed HDMI 1.3a Category 2 Certified Cable 28AWG - 10ft w/Ferrite Cores (Gold Plated Connectors) - WHITE
4852 Mini-DVI to HDMI Adapter
I have it plugged into input 6, but it doesn't appear to be working. Do I need to adjust the settings? have some type of software? what am I missing here?
thanks!
update: my background screen from the computer is now on the TV, but not the movie that I am playing.I just hooked my macbook up to my sony xbr6 tv via mini-dv to hdmi. I had to go into system preferences, then displays. A sony display window appeared, then I went to arrangements, and clicked on mirror displays, and it appeared....I'm still trying to figure out how to get the sound through my tv...I thought I might get sound thru the hdmi cable, but I think I might have to use an rca cable...
Maybe you are looking for
-
Exchange Rate Difference Error
Hi, While posting payment through F-58, we are getting below error : Ex.rate diff.accts are incomplete for account 0010500400 currency INR Message no. F5063 Diagnosis The accounts for posting exchange rate differences could not be determined. For the
-
I have flashing grey dots in my calendar and the battery is draining very fast
Hi, My battery has started to drain very quickly in the last couple of days. it now only lasts about 3 hours after a full charge. After playing with it for hours, I can only find one strange thing. The grey dots in my calender (that show when you hav
-
How make the Top-level Navigation and Content Area in one page as a whole?
I want to make the Top-level Navigation and the Content Area in the one page as a whole displayed in user interface.In the default framework,the Top-level Navigation and the Content Area were contained in 2 pages, So the vertical scroll bar could on
-
Hi There, This is my first post on TechNet so hello. I am having a problem with one of our users when she opens Microsoft Word. Anytime she opens it she has to open it in safe mode. I have tried the repair tool that comes all ready in Microsoft Offic
-
Hello! I use Courier font for my report (in Hebrew). I design the report on windows and then deploy it on linux. When i run the report i do see the text in my fields, but in titles i see ??? instead of the text. What can be a problem?