Tecra A2 recovery discs no work.....file missing or corrupt error message

Have done the recovery discs but HELP!!! Windows could no start because the following file is missing or corrupt: \WINDOWS\system32\config\system   No option to repair???    have done a memtest and it passed
Its a tecra A2 model number: PTA20E

The message means that the System hive (an important component of the registry) is corrupt. Rerun the recovery.
This applies to all versions of Windows.
   Registry troubleshooting steps for advanced users
-Jerry

Similar Messages

  • Envy touchsmart 17 recovery discs not working?

    I just got my laptop its A HP Envy touchsmart 17 model:17-j043cl.
    I made recovery discs right away because I also bought A Samsung EVO SSD 250 gig HD to replace the slow 1TB 5200rpm HD my laptop came with. Everything went good with making the recovery discs and it took 6 blank sony dvd-r to compleat using the HP included software(only lets you make 1 set or copy).
    Now I do all the nessarry HP updates and OS updates.
    I power down my new laptop, remove factory HD intall new Samsung SSD 250 gig HD in its place. power up the laptop and try to use recovery discs to load onto the new samsung SSD drive........Well NO LUCK, I get an error screen saying:
    "The system recovery media does not support this compiter. You are not able to restore this system with the media"
    So I do alot of searching I find that many others have had this same problem, and they resolved it by reverting back to previous BIOS, I know my BIOS was updated to f.43 after i made discs, how can I go back to what it was before the update to see if the recovery discs will work?
    or is there another solution??

    Hi Rizzo7883,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP ENVY TouchSmart 17-j043cl  Notebook and  having to restore the BIOS. Here is a document on restoring the BIOS back to defaults.  
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file

    I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file me be open in another application."Please help I really need to get this file open.

    Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
    You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X  or send me a link to the file by private message and I'll try the recovery tool I have for Windows.

  • I've had an iWeb site running for 4 months and I publish a monthly newsletter. Since August I've been unable to republish. The test connection under FTP settings works but I get an error message when I try to upload newsletter. Am I missing something mis

    I've had an iWeb site running for 4 months and I publish a monthly newsletter. Since August I've been unable to republish. The test connection under FTP settings works but I get an error message when I try to upload newsletter. Am I missing something?

    Where are you hosting the site a what are you using to upload the site files to the server?
    OT

  • I clicked "yes" to upgrade iTunes and now it doesn't work. I get an error message stating my computer is missing MSVCR80 and then a message stating Error 7 (Windows Error 126). I've tried reloading iTunes twice. What can I do?

    I clicked "yes" to upgrade iTunes and now it doesn't work. I get an error message stating my computer is missing MSVCR80 and then a message stating Error 7 (Windows Error 126). I've tried reloading iTunes twice. What can I do?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Upon upgrading iPhoto, iPhoto Help no longer works.  It gives the error message:  "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet." Help!?

    Upon upgrading iPhoto, iPhoto Help no longer works.  It gives the error message:  "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet."   I am obviously connected to the internet since you are reading this.
    I tried upgrading permissions but it did not help!?  Can anyone tell me what is wrong?  Thanks

    Try
    Reboot the computer, see if that fixes it.
    Then try:
    Backup your files off the computer (not TimeMachine) and disconnect
    Hold c boot off the 10.6 disk and simply reinstalling OS X
    Log in and update to 10.6.8
    c boot off the 10.6 disk again and use Disk Utility >Repair Disk
    reboot and all should be fine, except some third party programs that install kext files, those will have to be reinstalled from fresh sources.

  • I am trying to install MasterCollection_CS6_LS16. When I click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation.

    I am trying to install MasterCollection_CS6_LS16. When I double click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation. What does that mean? How should I proceed?

    Hey iraravitz,
    Could you please let me know what version of OS are working on.
    You might receive this error when you attempt to install on a drive with the HFS+ Case Sensitive file system, which is not supported for installation of Adobe Creative Suite 6.
    So, please try installing on a drive that has been formatted with a supported file system.
    You might refer the KB doc link mentioned below for the same:
    Error "Case-sensitive drives not supported" or similar install error | Mac OS
    Let me know if this helps.
    Regards,
    Anubha

  • Solaris Express 2/07 missing icons with error message...

    HI,
    I installed SE 2/07, when I try to log in remotely (using reflections or VNC) I get the following message, but some icons are missing are replaced for a generic one... weird... any help?
    Thanks!
    The message reads..
    "There was an error starting the GNOME Settings Daemon.
    Some things, such as themes, sounds, or background settings may not work correctly.
    The last error message was:
    Unable to determine the address of the message bus (try 'man dbus-launch' and 'man-daemon' for help).
    GNOME will still try to restart the settings Daemon next time you log in.
    Any idea hoe to fix this?

    Yep. The problem seems to be that you don't have dbus running.
    I did as the man page said and put this in my ~/.vnc/xstartup :
    dbus-launch gnome-session
    gnome-terminal geometry 80x24+10+10 title="My Desktop" &
    And everything works without error again.
    Cheers,
    James

  • Trying to copy files and getting this error message, One or more items can't be copied because you don't have permission to read them. this is really annoying, can someone pls help..?

    i have two network drive and i am trying to copy a file from my mac mini to one of the network drives, but i keep getting this error message "One or more items can’t be copied because you don’t have permission to read them." i have no idea why this is since i have always been able to copy stuff back and forth. i checked my file sharing permissions and it is set to read and write for admin (me), none for everyone and read for guests. can someone please, this is very annoying and this is the second time it has happened to me.

    neither move nor copy is working. both way gives same error message. what i would like to do however is move the file. yes i am logged in as a the admin and the issue is affecting not just that particular file in my system but others as well. i looked at get info and no the file is not locked but under permission, it says everyone and read only. it will not let me change this setting from get info however when i look under system preferences for file sharing, my setting is read and write for admin (me), none for everyone and read for guests.

  • Is this now where to ask DVD Studio Pro questions?  If not, please let me know where.  Here's my question:  Using DVD Studio Pro 3, when trying to burn a disc which is 4.5GB, I get error message "Not eough disk space in target folder".  What to do?

    Is this now where to ask DVD Studio Pro questions?  If not, please let me know where.  Here's my question:  Using DVD Studio Pro 3, when trying to burn a disc which is 4.5GB, I get error message "Not eough disk space in target folder".  What to do?

    Thanks.  Unfortunately, I need to make a master DVD that can then be duplicated in bulk as a single layer disc.  This surprises me because I tried burning a different DVD project that has worked in the past which is also 4.5 GB and now I could not burn that either.  I also reencoded some material to get the new project down to 4.4 GB but it still would not burn.  Any ideas are appreciated.

  • Itunes stops working and I get an error message "APPCRASH" when I try to play a downloaded TV show. I have udated Itunes and removed and reinstalled quicktime.

    When I try to play a downloaded TV show, itunes stops working and I get a error message "APPCRASH". I have updated itunes and removed and reinstalled quicktime.

    Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
    ... and click OK.
    Quit the QuickTime Player if you have it open. Restart the PC and try watching the videos in iTunes again. Do they play now?

  • When I try to open a pdf file I get an error message stating "There was an error opening the document.  The file is damaged and could not be repaired."  Other pdf files open fine.

    When I try to open a pdf file I get an error message stating "There was an error opening the document.  The file is damaged and could not be repaired."  Other pdf files open fine.

    You need to get a new copy of the PDF.

  • Every time I download a new app or update an old one it doesn't work. It gives an error message saying it is unable to download the application. I have 2 choices. Retry or done. Retry doesn't work so I press done. What can I do to fix this?

    Every time I download a new app or update an old one it doesn't work. It gives an error message saying it is unable to download the application. I have 2 choices. Retry or done. Retry doesn't work so I press done. What can I do to fix this? Someone please help!

    Try using Google's DNS instead of the one your IPS is providing.
    - To change on the iPod go to Settings>wifi and change the DNS to 8.8.8.8
    - For the computer see:
    Public DNS — Google Developers
    - Did anything happen to your router right before this started? Maybe the router is blocking the port used.

  • I cannot open files in excel with error message "The file name or path contains invalid characters

    I cannot open files in excel with error message "The file name or path contains invalid characters

    Found the solution. The hardrive name was changed to "/" which is not a recognised file path character. So I changed the name to "Mac" then I was able to already open all files in excel and word

  • I upgraded to the new itunes version 7 and now my podcasts on my iphone4 won't work.  i get an error message "temporarily unavailable".  has anyone found a solution to be able to listen to podcasts?  thanks

    i upgraded to the new itunes version 7 and now my podcasts on my iphone4 won't work.  i get an error message "temporarily unavailable".  has anyone found a solution to be able to listen to podcasts?  thanks

    I have the same problem, but don't expect Apple to help! I rang their help line and explained the situation and that the same experience is reported all over their forum and they would not assist unless I paid for a one year help subsciption.
    This company has lost the plot! They create software that universally will not work then expect customers to pay to have it fixed. Technically I should walk straight into the nearest apple shop and ask for a refund, as the device is no longer fit for purpose!
    Congratulations Apple for the best ant-promotional App on the market and your astounding lack of service ethos.

Maybe you are looking for