TECRA A3 - at start up connected LAN cable shown as unplugged

Hi,
since I have got my TECRA A3-152 I experience that the network card at start-up does not recognize the network cable. The network cable is reported as unplugged. Only after manual disable/enable of the network card the cable is recognized and the network card works fine.
Operating System is XP Professional version 2002 with service pack 2 (original installation in english).
Network card: Marvell Yukon 88E8036 PCI-E Fast E with driver Marvell version 7.29.4.3

Hallo Antonio
It is very strange issue and I have never heard about that. Anyway the fact is that you have latest available LAN driver. I dont know your personal settings but maybe it is because of some additional software you use in your company or whatever.
To be sure if there is some serious problem it will be interesting to know if the same occurs with factory settings. If there is any possibility tries to obtain second HDD and preinstall the unit with recovery image. If problem still persists maybe is the card itself defective. In this case just ASP can make other tests to find out what wrong is.
Sorry but i dont have any other idea.
Bye

Similar Messages

IMac slows down wifi/LAN cable connection

Hello,
I came across a quiet unique and annoying problem, that I have not seen being discussed so far.
I spend the last 3 weeks trying to solve my internet/wifi connection following all kinds of posts here.
Problem: Wifi/Lan internet connection is slow (less than 0.8mbit/s)
Problem only appears when I login with an iMac via wifi OR lag cable
iMac, 2011 27`` Mac OS 10.7.5
Background:
I have a 20mbit/s internet connection with my provider. works fine on iPad, iPhone, appleTV HTC one mini, etc… BUT as soon, as I login with my iMac, the internet connection slows down to less than 1 mbit/s
I have tried following solutions:
- live box (router) was exchanged and is brand new
- security settings on router changes (wpa2 etc)
- all channels on router tested from 1-13
- keychain saved passwords for Wifi and router deleted, PRAM reset
- renewed lease of connected devices (no IP conflict)
- shut down wifi on iMac - connection with all devices great, as soon as i switch wifi on, all devices lose their high speed connection and go down to less than 1mbit/s
- connected iMac via LAN cable: same problem, all speed is lost
- iMac is not in the network - speed is great
- connected iMac via time capsule wifi, same problem. connected iMac via netgear extender, same problem
also, if I open network preferences and start the "assist me" app and run diagnostics, all dots are green except the ISP and server, bit most of the time they switch to green immediately, but connection is still slow.
Reception bar is on "3", so signal strength is no problem, and I´d like to emphasize that this is also happening on LAN cable. and again, if the iMac is disconnected from wifi AND / OR LAN, all other devices work fine.
Would love to hear your thoughts!
Thanks!

Although I have been on Mac OS for a while now, I have never had to troubleshoot faulty network in the mac itself.
OSX does apparently have a safe mode boot..
OS X: What is Safe Boot, Safe Mode?
Try that.. as that gives you the same thing as windows with all the extras left out, so you get a basic operating system only and you can see if the problem still exists.. if it does.. I would simply bite the bullet.. wipe the Mac.. reinstall the OS and then carefully reinstall your applications from original disks/downloads and move your operating files back .. but start a different user on the computer and copy back the min you need to get working again.
If the problem still happens even in safe mode boot then do a hardware test.. because it is possible something has actually failed at the hardware level.
Using Apple Hardware Test

Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

If you just reboot it, does the problem go away?

Connecting MacBook Air to LAN cable?

Hi
Currently sitting in Singapore in a serviced apt that does not allow me to connect wirelessly to the internet. I have to connect a LAN cable to a laptop... How do I connect one to a MacBook Air?
TIA

Hi,
Just head over to Wheelock Place on Orchard Road at the Apple Center (2nd Floor, I think) and ask for the USB to Ethernet adapter.
That should let you plug in your Air to your LAN cable.
The other thing you can do is get an Airport Express (from the same place). Just plug your LAN cable into it, configure it, and you've got wireless - easy!
Hope that helps.
Message was edited by: d-mo

When ipod starts up, shows usb cable to connect to itunes then asks for my lock password but cannot get into ipod to put in password. any ideas?

when ipod starts up, shows usb cable to connect to itunes then asks for my lock password but cannot get into ipod to put in password. any ideas?

You may need to connect the iPod in Recovery Mode and then restore it via iTunes. See this article for instructions on getting your iPod into Recovery Mode.;
http://support.apple.com/kb/ht1808
B-rock

How to connect internet modem to wrt54g via LAN cable and make it work??

I have time warner cable. they gave me this cable modem when I got internet. can I connect this cable modem to my wrt54g using the lan cable? it doesn't have a connection for a coaxial. Is this possible? It should be, right? when I try it, No internet or anything goes through the wrt54g. I have the latest firmware, too. thank you.

Who is your ISP?
you can try this procedure:
CABLE
Then check if you can get online afterwards...
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

Can I use AirPlay from my PC to my AppleTV when connected to an AirPort via LAN cable?

Well as stated above I'm wondering if I can use AirPlay from my PC to my AppleTV when my PC is connected via LAN cable to an AirPort.
I'm asking because usually your PC has to be on the same Wifi as your other Apple device, so AirPlay can function, and id love the ability to Stream via AirPlay but still be connected to the internet via LAN cable.
Thanks in advance for any help!

AirPlay is not restricted to wireless only. It can also work over Ethernet. Basically as long as there is a connection (on the same subnet) between the iTunes host and the AirPlay "speaker" streaming should take place without any issues.
FWIW, My Win8 PC is connected to a Time Capsule via Ethernet. In turn my Apple TV is connected to the TC's wireless network. I have no trouble streaming from the PC to the Apple TV in this configuration.

Firefox doesnt work when LAN cable connected but does with wireless

When connected to the LAN (provided by a cable company) I get server not found messages but woeks okay when using a wireless connection. I have cleared recent history = cache and cookies, rest proxy server to no proxy and put firefox.exe into my firewall exceptions and still no go. I am borrowing the wireless connection, my connection is through the cable.
== This happened ==
Every time Firefox opened
== within the last 24 hours

Hello.
When using a LAN cable, can you connect to the internet using other software (such as download managers, other browsers, IM clients, update software...)?

Help on 4695AGN wireless search - nothing until a reset by a LAN cable?

Hi all,
Had sent wrong help message in t-series. OK, short story:
I had get a T61p before and get trouble with wireless LAN search in Vista 32, my 4695AGN card cannot found any network until I plug a LAN cable from my router, after it login successful, the wireless card can see all wireless LAN around me again. I had try update all update by 'system update', restore the complete system, contact Lenovo support and follow their suggestion, uninstall thinkvantage access connection and wireless network card driver, re-install access connection 1st and drive 2nd. but still useless. I can sure not a hardware problems as I can login successful when I still use XP SP2.
Any suggest will be helpful and let me say thanks first.
Steven
PS: My config: 6459CTO with Verizon WAN, 4695AGN, most update by Vantage system update, Vista Ultramate 32, 4G RAM
Message Edited by bomix on 03-03-2008 07:11 AM

I think it is the last airport up date. I have a bunch that started not to conecton thursday.

Cannot connect via cable on Windows XP home SP2

Good Afternoon,
Maybe you can assist me here.
I cannot connect via cable my N91 (4 gb hdd) to Windows XP Home SP2. I can however connect via cable to my work computer which has the OS Windows XP Pro sp2.
In both cases both OS's are up to date, I have updated the phone OS to v2.10.013 RM-43. I am using the most up to date drivers that is available on nokia.com as well as the current ed of PC Suite (6.82.22.0)
The following is the steps I followed in both cases starting with XP Pro
1. Installed Drivers
2. Installed PC Suite
3. When prompted by PC Suite connected Phone via cable to Computer, further install steps were required. No reboot required. PC Suite then picked up phone
XP Home
Followed steps 1 + 2 in the same order
3. Connected N91 to XP Home computer, after driver install activity rebooted computer as requested. Disconnected N91 On reboot to desktop, in PC Suite I clicked on Get connected. Select Cable connection when prompted attached cable to computer and then to phone, on the phone select PC Suite. .
At this point I get the hour glass and nothing happens, Next is ghosted. It has been like this for 20 mins.
I have uninstalled both the drivers and the software. For some reason the updater can connect to the phone.
Can you advise on what I can do.

Hi
Sounds lik ethe PC is having issues seeing it. Try this
/discussions/board/message?board.id=pcsuite&message.id=11480
Try this first:
1. Go to Windows' Control Panel and open "Add or Remove Programs" application.
3. Select "PC Connectivity Solution", click "Change" and then "Repair".
4. After Repair, restart PC
music

Can't connect via cable, but wireless works.

iMac, Leopard, iTunes, all current. AppleTV only shows up when I disconnect my ethernet cable. At that point my Airport base station (older version) makes the connection. If I turn Airport off in the OS, still no go. I've tried multiple cables too. I've also tried my Macbook pro.
I obviously want the wired connection for greater speed and since the ATV is in the room right next to the computer it's no big deal to run a cable. I swear I had this all running correctly under Tiger, but now I'm starting to wonder if it had been wireless all along and I never realized it.
Help!

Hi,
I had the same problem and this worked for me -
Go to System Preferences/Sharing and enable "Internet Sharing" where it says "Share your connection from" choose Airport and where it says "To computers using" select the ethernet port that you've connected the cable from the ATV to on your computer.
Go to System Preferences/Security/Firewall and if you've selected the last option "Set access for specific services and applications" add iTunes to the list by clicking the + and navigating to it.
Regards

TS1538 i cant connect my iphone to laptop. its nither charging nor connecting :( usb cable is okay .... can any one help ??

i cant connect my iphone to laptop. its nither charging nor connecting usb cable is okay .... can any one help ?? pls...

BOB we need you urgently
Perhaps Bob will see this thread, he is the professor in these cases.
You do not use a WEP password but wpa/wpa2 on router and equipment.
All equipment connects to WiFi, but for your iPad.
Even with all other equipment WiFi off, you cannot connect your iPad.
Your iPad connects to other WiFi nets correctly.
All resets etc done on iPad and Router.
Still I am not sure it is your router for sure, frustrating...
I want to test 2 other things:
1. in your iPad, set everything OFF in Settings/Cellular, turn off/then/on your WiFi, and see whether it will still not connect...
2. If that does not do it: disconnect the router as well as the modem from the power, for 15 seconds, then reconnect the modem, let it fully start, then reconnect the routet let it fully start, turn of your WiFi in iPad, then on, and see whether it will connect.

Can i get an adapter so i can hook up my cp1215 with a lan cable instead using the usb cable?

I am trying to hook up my printer to my wireless router using a lan cable. Is there an adapter or other method to use?
Thanks

Hi,
Based on its specs, it ONLY has USB connection and no slot for a NIC therefore you can use USB wireless print server to connect it wirelessly.
Here are some of them:
USB Wireless Print Servers
Instructions and driver should come with the box.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Security: WiFi vs. LAN Cable

With an iMac connected to a Time Capsule via a LAN cable, and the WiFi (Airport) selected "Off" in the iMac, what, if any, data is being broadcast over the Time Capsule's WiFi frequency? I've always assumed that a hard-wire connection bypasses the Time Capsule's WiFi component. Therefore, it would seem that a cable connection should be more secure than a WiFi connection. Is this true? Or, does a Time Capsule transmit "duplicate" data over the WiFi, even with WiFi/Airport is turned off at the computer?
Is there a procedure by which the Time Capsule's WiFi capability can be turned off?
Cheers........

No data on the LAN link will be retransmitted on the wifi link unless the TC is repeater.
You turn off the wireless by going to the wireless tab and selecting wireless mode.. off. This is in the airport utility.
And you are quite wrong to think wireless is a security hazard on the TC or any wireless.. as long as you follow the rules..
Set wireless security to wpa2 Personal and set a password that is totally random mix of upper and lower case alphanumeric (although a mixed sentence is easier to remember). Make it 30 characters long if you are paranoid.
Reports of hacking of wireless are in specific lab conditions.. yes, it will become vunerable when super quantum computers become available.. we still have a few years to go.. and by then the wireless security method will also improve.
The security hazard of the TC is the reset button.
Anybody with physical access to the reset can press it for one second and have full access to your files for 5min.. without altering settings and without any warning to a person logging in later.. since apple removed all logging and SNMP from the TC.

Hi, I'm thinking of buying the Airport Express or Extreme for my school dormitory, would i need to plug them into the already existing school internet via LAN cable or do the products just work by themselves?

Hi, I'm thinking of buying the Airport Express or Extreme for my school dormitory, would i need to plug them into the already existing school internet via LAN cable or do the products just work by themselves?

Welcome to Apple Support Communities
AirPort stations aren't modems, so they have to be connected to the modem you are already using. The AirPort Extreme and Express have a WAN port, where you have to plug an Ethernet cable that has to be connected to the modem.
After doing this, you can set up the AirPort station by using AirPort Utility. If you have Windows, download AirPort Utility from the Apple website > http://support.apple.com/kb/dl1547

TECRA A3 - at start up connected LAN cable shown as unplugged

Similar Messages

Maybe you are looking for