Tecra A3 - Creative Mouse Wireless does not work

My Creative Mouse Wireless does not work while touchpad is installed.
Even if I disable the Touchpad, the mouse seal does not work.
Does anyone know how to solve this problem?
Thank you,
R.P.

Hello
On this way it is not easy to say what the problem is. I assume that you got some installations software for your external device. Install it and it should works.
As far as I know functionality of external mouse doesn`t depend on touchpad settings.
Bye

Similar Messages

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help.

Whenever I play anything on Windows Media Player Classic, the middle mouse button does not work as a vertical scroll in firefox, but instead shows a horizontal scroll that does not scroll the web pages. How can I fix this problem?

Hi
I have a windows 7 and whenever I play anything on Windows Media Player Classic, the middle mouse button does not work as a vertical scroll in firefox, but instead shows a horizontal scroll that does not scroll the web pages. How can I fix this problem?
I hope that was clear.
Thnx

Hello kmanthie,
I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
I worked on behalf of HP.

My mouse can not click to anything left, right or the middle mouse button does not work

I am using a 24 inch imac and the problem is suddenly my mouse can not click to anything left, right or the middle mouse button does not work i can see cursor moving and i can use the features of the keyboard but my mouse dies. I tried to plug in another mouse magic trackpad and my tablet but each has the same problem. I can not click to anything but cursor is moving and computer is not frozen. I have to shut it off from the power button when this happens. Do you have any idea what can cause this and how can i fix this?

Reset the SMC 2-3 times. Click Intel iMac SMC and PRAM resets for instructions.

My adobe presenter redemption code (creative cloud) membership does not work.

my adobe presenter redemption code (creative cloud) membership does not work. Each time I input my presenter code at creativecloud/redeem it returns a message 'ooops, this code has been redeemed.'

I got both installed but on installing Presenter keeps giving errors that a previous version is installed on the computer and cannot proceed. I verified that there is no previous version and keep redoing the install and get stuck AGAIN and AGAIN at this point.
I also verified that I have the latest version of Flash on Chrome and I have the latest version. Why is Adobe so all over on downloading/installing their products. I (and other paying customers) cannot waste more time on this very simple procedure just because the software packages are not packaged properly or. the teams in charge of ensuring the products DID NOT correctly package the products securely (with the updates included) and more importantly, ensured that the products were linked to user accounts who purchased them.

I have the macBookPro and the problem is the mouse pad does not work I tried everything but still does not work what should i do ?

I have the macBookPro and the problem is the mouse pad does not work I tried everything but still does not work what should i do ?
so i'm using the usb mouse

I want to clarify the issue.
The issue is with the MBP trackpad, and it works fine with an attached USB mouse.
With some ingenuity, you might be able to fix this yourself, but I suggest visiting your local Apple Store/Genius Bar. Some have fixed this issue and have posted their results online, but the Apple Store should be your first destination.
Post here with your results!!

New ThinkPad Precision Wireless Mouse (MORFGOO) does not work

Hello to everyone,
My wireless mouse does not work. The symptoms are: The mouse is completely unresponsive, as if it had no power at all (cannot be turned on, no red laser, no interaction with CPU).
How I came to notice the problem:
I installed the mousesuite from lenovo/support/mousesuite. Then I restarted the computer. After this, I connected the USB Bluetooth Adapter to a USB port of the ThinkPad 430s 2352 CTO. I tried to turn the mouse on. No changes were noticed, Mouse still offline, no light. Tried a different set of battery & tried the wireless button. No change. Reinstalled the mousesuite. No noticeable change.
I believe the mouse might be broken. Could anyone please provide me with support as to how I could solve this? In the case that it is non-functional, how do I return it to lenovo? Is it under my one year guaranty (I bought it as an accessory on my command for my laptop)?
Thanks for your answers!
ph423

Hi,
Your migration to Lion brought over a previous hot key preferences document. And this contains one bad key that wasn't updated.
- Quit System Preferences (if open)
- Delete this document to remove a carry-over mapping error.
- Then logout
Note: That this will delete any existing modified keyboard assignments. Re-assign changes manually.
Note2: This document is in your users preferences folder.
~/Library/Preferences/com.apple.symbolichotkeys.plist
-Alan

Wireless printing on HP 6500A Plus -wireless does not work

windows 7, linksys E2000 router, sony vio computer wireless N.
No issues printing by USB. When using wireless, prints first few lines, then slows to a stop. Loses feed from router and disconnects. Tried disabling all firewalls, removed antivirus, etc - nothing is working. Not the only computer in household with same issue as well - Toshiba running xp is having same problems. Need fix or I will trash printer and never purchase HP again and I have long been an HP customer for printers.

There have been a few issues with printing using the new E-series Linksys routers. Make sure the router has the latest firmware. If that does not work, set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). Yours is 192.168.1.100 to .149. Let's use 192.168.1.200 for your printer.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

T500 Wake on Lan (wireless) does not work.

Hi,
I set up T500 (Windows 7 Ultimate 64bit) for wake on lan,
1) Enable Bios WOL
2) Enable WOL in power manegement tab of Intel WiFi Link 5300 AGN property in device manager.
But WOL does not work. Sending magic packet from a PC in the same WiFi segment does not wake up sleeped T500.
Are there any setting for WOL in lenovo tools ?
Does anybody use WOL(WiFI) on T500?
Thanks,

Is the T500:
Associated with an access point at the time it is put into standby/sleep mode?
Connected to AC power for the whole time it is in standby/sleep mode (in otherwords the whole time it is in a low power state) when you are attempting to use WoWLAN?
If not, that may be at least part of your problem, as it is a known limitation on WoWLAN operation.
You also need to have the laptop "set up" to the master workstation, and the WLAN configured to handle braodcast wireless frame, but I am presuming you have already done that side of things.
Cheers,
Bill
I don't work for Lenovo

Mouse Wheel does not work on a Laptop?

I have written a program to support mouse wheel action in my appplication. (using 1.4.1) This works fine on my desktop PC but on my HP Laptop it is a no go.
The mouseWheelMoved event doesn't even register on the built-in mouse pad of HP. (I checked it out in debug mode and moving the HP mouse wheel does not generate a mouseWheelMoved event.)
Any help or insight on this problem is appreciated.
Thx

>
The mouseWheelMoved event doesn't even register on the
built-in mouse pad of HP. (I checked it out in debug
mode and moving the HP mouse wheel does not generate a
mouseWheelMoved event.)
Maybe it registers as some other mouse event. Have you trying listening and reporting other events?

Tecra A7 - Intel PROSet Wireless does not react upon shutdown

Hi
when shutting down my Tecra A7 the Intel PROSet/Wireless does not react but must be ended manually.
Would the download of the latest Intel driver as published by Toshiba help to solve this problem ??
Thank you in advance for your support!
Best regards,
ClausP

Hello Claus
You can try to remove Inter PROSet and use Windows settings for WLAN configuration.
I do not have this problem but you can also try to install latest version from Toshiba support page.

Tecra M7: ESC/Rotation button does not work

There is "escape" button on the screen panel (left lower corner). The other function on the button is to rotate the screen if you hold it for more than 1 sec (according to the picture and the manual).
This should be very handy in the tablet mode. Unfortunately the rotate function does not work for me. The button itself works because "escape" does what it says. I would not want to redefine "escape" to "rotate" but there is no even this option.
Anyone has/had similar problem?

Hi
This ESC/Rotation button functions the same as the ESC key when tapped, or changes the orientation of the screen when pressed for more then second. Thats right!
Did you read the further information in the user manual??? I found some nice info in the Changing the screen orientation section.
You can change the screen orientation on three different ways and one of this way is the usage of the ESC/Rotation button!
When the Toshiba Accelerometer Utilities and Toshiba Rotation Utility are running, changes in the orientation of the top and bottom of the screen is automatically recognized by pressing ESC/Rotation button for more than one second.
So be sure that both utilities are running properly!!!
Best regards

Getting input from mouse-wheel: does not work under windows/IE

Hi
I have built an applet that extends JApplet. To it I have added a class that extends JPanel implements MouseListener, MouseWheelListener, MouseMotionListener.
I collect input using the method
public void mouseWheelMoved(MouseWheelEvent e){
do stuff...
I have build this on a mac and tested it in firefox and it works fine. But on xp/vista internet explorer, the applet does not respond to mousewheel input. On mac osx /safari it does not work either.
Is there any solution to this problem?
Best regards, Carlis.

Just for luck, try setting the JPanel focusable.panel.setFocusable(true);If that doesn't make a difference, you need to post a [_Short, Self Contained, Compilable and Executable, Example Program (SSCCE)_|http://mindprod.com/jgloss/sscce.html] that clearly demonstrates your problem.
db

HP 5524 Wireless does not work after firmware upgrade

HI,
I have just purchased an HP5524. After initial problems setting up the WPA key from the printer screen, I connected via USB, found the printer and swapped to wireless successfuly. I then installed the printer software on all my computers at home successfully over wireless.
The printer then needed a firmware upgrade to support eprint (?), which is successfully connected, downloaded the fireware, installed and went through the boot cycles successfully.
However, ever since wireless will not work. Before I return it to the retailer as "not fit for purpose" I thought I would ask the forum. The diagnostics downloaded a tool, which I went through, but this did not offer solutions that I had not already tried.
Thank you

Hi,
Thank you for posting you query,
In order to resolve the issue, please make sure the printer is placed closer to the router and uninstall the printer drivers already installed and then start the instalaltion and seelct teh connection type as wireless network. Then select use USB to configure wireless and when prompted conenct the USB cable and then select the network and enter the encryption key follow the onscreen instructions.
If the issue still persisits, please open the browser and in the address bar enter the IP address of the router and click on GO. This will take you to the router configuration page. On the router page, please click on Wireless Setup and please make sure SSID Broadcast is enabeld and the Wireless Mode is set to Mixed or 802.11 B/G/N and the Wireless Channel is set to 11 and click on Apply. Then try to connect the printer to the network by using the CD.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Portal Content Studio - mouse button does not work anymore

if you use the portal content studio
content-administration > portal-content
you can configure the portal objects by browsing them and clicking the right mouse button.
That worked but now the mouse button doesn't work - left mouse button works as expected (with left mouse button one can navigate through the objects, iViews, working sets, etc...).
Right mouse button does nothing, portal objects could not be edited. Of course, the mouse is Ok.
Is this strange error known?
How to avoid it?
Is there a possibility to reset this application, so it restarts/re-initializes correctly?
Even a restart of SAP NetWeaver didn't help.
Or can one use another method to perform an action instead of the right mouse button?

reason were endorsed libs in the jre

Tecra A3 - Creative Mouse Wireless does not work

Similar Messages

Maybe you are looking for