Tecra A4 Bios Update failed!

I try to update Tecra A4 Bios to version 1.7, of ATI or NVIDIA, using windows method. When the system turn off to restart, never start again. At this moment when i try to turn on have to click power buttom for a few seconds, turn on power led for 1 second give sinal of acessing disk, and turn off again.
Can anyone help me?
Thanks

Hello kikas_sousa,
You have had a failed BIOS update. It happens sometimes, especially when a wrong version (model) was downloaded and used or due to an interrupted upgrade. Don't worry though, as the spinning of the floppy drive (attempt to BOOT from floppy) is a good sign!!! It means that your system can still accept an upgrade but with some additional help from you:
Download the alternative BIOS update from TOSHIBA for your model (not the windows one, but the DOS version) and make sure it was downloaded CORRECT. Further instructions you will find in a previous thread that has been confirmed as working. You can give it a try OR ask the Toshiba Service for assistance (you will have to send them your notebook).
The link to the thread is here:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19801&messageID=72599
Whatever you do is ON YOUR OWN RISK, though. Please remember this, as I don't want to be held responsible for providing you this idea. Most efficient way is always the Toshiba service as they are very well aware about what to do in each situation.
Please consider reporting if this method was a success for your case because we need some feedback to provide "working" solutions to fellow Toshiba users like you before a thread is locked due to inactivity.
Regards,
electrochain

Similar Messages

The system BIOS Updated failed

I have an HP Elitebook 820 G1.
Every time I try to upgrade the BIOS TO 1.04 , it says "The system BIOS Updated failed. Unable to open the Bios Signature file."
* I tried unsuccessfully using the HP_TOOLS And then the USB method.
I can't also update to Win 8.1. Error 0xC1900101-0x30017
INTERNAl_POWER_ERROR.
Need help please, this is giving me headache.
Thank you and Best regards,
Ozy

OZY
uninstall Norton better remove it for the update
https://support.norton.com/sp/en/uk/home/current/solutions/kb20080828154508EN_EndUserProfile_en_us
You must install all Windows 8 Update, before you windows 8.1 Update use
Never use MS Defender and other antivirus software.
After successful system update, install this software
Say thanks by clicking the "Kudos! Star" which is on the left.
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Bios update failed : does not meet system requirements code 9994/9996

bios update failed : does not meet system requirements code 9994/9996 / Model ny801av-aba HP Pavilion p6100z cto Desktop windows vista basic current bios version 5.38, released 03/20/09. 4GB ram (3.5 useable) AMD semperon LE- 1300 socket am2+ code name sparta. M2N68-LA Motherboard BIOS update verision 5.49 released 08/24/09 (am trying to upgrade to a AMD phenom triple core 8400 2.1 gig that is why I am trying to update the bios, when I put it in I got nothing.)
This question was solved.
View Solution.

Figure 1: Error message
The error displays when ...
the update requires certain hardware or software that is not installed on your computer (examples: keyboard replaced with a non-HP keyboard or Microsoft .NET software is not installed),
the computer does not meet a certain minimum hardware or software requirement (examples: 4 GB minimum memory, 200 MB free disk space, or .NET version 2.0 required and 1.0 is installed) .
Usually, this error indicates the update is not needed for your computer and it should not be installed.

System BIOS update failed

Hello,
I need your help. I ran HP System Diagnostics following recent BSOD incidents (about 3) on my Pavilion dv6. I ran all the tests successfully except Memory Test as it takes 6 hours (approximately).
Interestingly the BIOS test came up with an error message "The System BIOS update failed. Failed reading BIOS image file". I tried running BIOS driver update from th HP website for my dv6 notebook but I am not sure it worked. During the update the computer would shut down - is that normal?
What can I do to check that my BIOS from 25 January 2013 is the current version? More importantly prevent future BSOD appearing. I have plenty of memory, so rather intrigued. Ran Norton and Microsoft Security and no viruses etc.
Hope you can help.
Many thanks,
Barbs

Hi,
So the system shut down is normal for BIOS update and if I can restart the computer, therefore assuming the update worked.
I checked HP System Diagnostics the BIOS test still returns with an error message "The System BIOS update failed. Failed reading BIOS image file".
Any other suggestions?
Thanks again,
Barbs

Tecra A10 - BIOS updater doesn't work on Windows 7

Upgrading BIOS for TECRA A10/M10 and Satellite Pro S300/S300M to version v1.90 using P0065v190.exe (bios-20090304141534) fails with message:
"[Error] BIOS Update is not supported OS. Unsupported OS or service pack is installed."
Note: Executing as an Administrator returns the same error.
Probably Windows 7 is not supported but, it must be an explicit protection since the Vista version should work in 7. There's any updater parameter to skip this protection?

BIOS update is designed and tested for certain OS. Win7 is not on the market and at the moment Toshiba offers tested BIOS updated for Vista only.
Sorry but what else to say. You probably know how sensible BIOS update is and how dangerous it can be. So don't play with this and don't make not-tested experiments with this stuff.
In few months Win7 will be on the market and Toshiba will start official support. You can wait few more weeks isnt it?

[SOLVED] MSI Z97 Gaming 9 AC - Bios Update Fail

Hi,
today i decided to do a bios update of my board.
A friend of me told me NOT to use the Windows-Flash tool cause he killed two borads with it.
Ok so i used the flash utility from the bios/uefi menu with a usb-stick (M-Flash).
Everything looked ok - flash tool was running and told me success/complete and it will now reboot/reset.
At this time i wasn't able to boot anymore
It was like the board tried to read the flash but failed, reset, failed ...
Lucky for me there is this little switch for the bios chip.
Everything worked with the backup chip and i tried to reflash the broken master chip.
-> Using the MSI E-Setup with Mode "In DOS Mode. (USB)".
Booting up the usb stick and switched to master bios chip when i was seeing the "alert - only continue when you know what you are doing bla bla"-message.
Wasn't able to flash anything cause of error:
Quote
ROMID is not compatible with existing BIOS ROMID
Asking google i should use the /X option (/X - Don't Check ROM ID).
Now i got a new error
Quote
Rom image layout detected RomHole is redesigned
With this message i should use the /K option (/K - Program all non-critical blocks) i was told ... now a was able to flash the chip
And the result was: fail
I found the "HQ USB flashing tool" here and tried to flash the broken chip again (switching the bios switch from backup to master after booting), but also no luck for me ...
After a break i had an idea - at which time i can switch from the backup chip to the master chip?
The bootcode "A2" was the right for me
At the bios/uefi setup all my fans were running at full speed and i was sure this is because of the broken master chip.
So again i tried the M-Flash tool from the setup - f**k it will reset/reboot before the flash progress will start - but now i know the time to switch from backup to master chip
The tool started and i saw the same messages (everything ok, reset/reboot) as i tried it the first time.
Reboot - SUCCESS!
I wasted about three hours of my live to brick and unbrick the master chip, but i don't know why this happend
Maybe this post will help someone to fix a failed bios update.
YourName

Thanks for sharing
I used M-Flash a couple of times, just remember DON'T remove usb-stick until it reboot successfully to os....

HP Compaq 8510w BIOS Update failed, stuck in bootloop.

Let me begin with how this happened. I wanted to create a Hackintosh and decided to use my HP Compaq 8510w for that purpose. But since HP whitelists what WiFi cards you can use (OS X is not compatible with Intel), I had to flash a custom BIOS that removed the restrictions. This flashing worked though it would say it failed and should be flashed again. But it would still work and load everything correctly. I finally decided to restore the BIOS but the installation failed and the laptop is now stuck in a boot loop. I want to know is there any way I can recover the BIOS (WITHOUT SENDING THE UNIT IN FOR REPAIRS) or if I need to purchase a new Motherboard for it. I have tried using the Win+B recovery method though I might have done something wrong because the laptop takes no notice. Do I have to use a USB Floppy or can a Flashdrive be used?
Thanks,
Mark

try it without naming the file. there is only one file that is a ROM filetype. That is the EUR5.14 file in the F5.14 BIOS update. There is also a F.5.11 available under XP. The OS does not matter as this is cross platform code that is loaded before the operating system.
If the preceding does not work then you wil have to go online and find a BIOS recovery company that is relatively local to you. Their websites cover what you need to do for them (provide a valid ROM file. (perhaps a eeprom chip matching the one in your PC)
Going to this level is sometimes a bit too much for non techies as it requires acquiring and properly using a special tool to remove and install the CMOS eeprom chip. I have no idea what level of expertise you have.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Pavilion g6-2235us bios update failed - error msg on boot

I've had trouble updating to Windows 8.1, so I did a bios update, as recommended by the HP Web Site, but it failed, and now the laptop won't boot. It displays error message "Your computer needs to be repaired:\bcd, error code 0xc0000034..." Additional info is available by hitting escape, and I can get into a black screen with options:
f1 System information
f2 System diagnostics
f9 Boot device options
f10 BIOS setup
f11 system recovery
I've been down all those paths, with no luck on proceeding any further. f10 shows me all the bios setup screens and the bios version shown is F29, the version that I tried to upgrade to.
I've tried removing the big battery and pressing the start button for one minute - no joy.
I've tried holding Windows+B+start - no joy
I guess I'm down to trying to create a USB Key with the BIOS on it, and that's where I am stumped. The BIOS softpaq for this machine is sp66880.exe. I've got that on a fat32 usb stick with the volume label HP_Tools, and I've got HP tools on the stick too. When I try to boot with the stick by pressing windows+b+start, the light on the USB stick flashes a lot, but ultimately I get the message "The system bios recovery failed. Unable to open bios image file." I have the feeling that I just don't have the proper setup on that USB stick. I tried to run sp66880.exe on another computer, but it tells me that it is going to immediately flash the bios, which I definitely don't want to do (on my Toshiba laptop!).
I would greatly appreciate any help you all can give me on how to create the recovery USB stick in the proper format. Thanks in advance.
This question was solved.
View Solution.

Fixed!
It turns out that the bios update actually succeeded, but something in the hard drive boot files got corrupted. I was able to make a Windows 8 Recovery USB stick on another machine, and finagle around to have the HP laptop reformat the hard drive to original factory condition. Fortunately, I made a very recent Macrium image before this most recent problem started, so the next step is to restore that image. With the new v. F29 bios, hopefully this beast will finally upgrade to Windows 8.1.

Tecra A11 - Bios Update offered - necessary?

Hi - I've just been offered a BIOS Update for my Tecra A11-17N (Via Toshiba Service Station) - BIOS Update v3.10....
Clicking on the update doesn't offer any details as to what it contains/fixes/improves - it just says basically "install, and computer will re-boot a few times".
My Tecra is running perfectly - no issues at all. Should I ignore this?

Hello
> My Tecra is running perfectly - no issues at all. Should I ignore this?
Youre right. In this case you can ignore this update because everything works perfectly.
BIOS update is always a little bit risky so it shouldnt be done just for fun. It should only be done if its really necessary and in your case you dont need it.
So have fun with your Tecra A11 and you can forget the update :)

U530 bios update fails.

I have downloaded a new verios of bios update (7ccn35ww) but I am unable to update the bios. Every time I run the tool, it automatically restarts the system and tries to update, when it complains that "Update failed. Secure Flash"
Does anyone know why ?

aminvali wrote:
I have downloaded a new verios of bios update (7ccn35ww) but I am unable to update the bios. Every time I run the tool, it automatically restarts the system and tries to update, when it complains that "Update failed. Secure Flash"
Does anyone know why ?
Hi aminvali,
      Just to cover all the bases, what is your current BIOS? When did you purchase your U530? To find your current BIOS, just spam F2 upon a cold boot, and enter the BIOS utility. If you have Win 8, see this article:
https://forums.lenovo.com/t5/Windows-8-and-8-1-Knowledge-Base/How-to-get-into-BIOS-in-Windows-8/ta-p...
     The reason I ask, is because if your U530 was bought in the last few months, you could already have the 7CNN35WW BIOS loaded in your system. Lenovo usually loads the last BIOS available to them in the manufacturing plant, before they post it on their support site. Hence, if you try to flash the same BIOS you already have loaded, it will generate an error.
     Please report back with your results.
Edit: Also, assuming that 35WW file is a new BIOS for your system, when you downloaded the file, did you put it in the Lenovo D: drive?
Have you tried this:
Turn off the comupter. Enter BIOS. Change boot mode from UEFI to Legacy on the last tab. Save changes. Boot Windows. Run update file again. After successfull update return your BIOS settings back
Cheers
DragonRider
I'm DO'ing IT
Lenovo Y470 085525U 2nd generation Intel® Core™ i7-2630QM processor ( 2.00GHz 1333MHz 6MB )
IdeaCentre A520 Intel® Core™ i5-3230M processor ( 2.60GHz 2600MHz 3MB )
YOGA Tablet 2 Pro-1380F
X1 Carbon 2nd Gen (20A8) ThinkPad + T420

G550 BIOS update failed. Reset CMOS?

The BIOS update from Lenovo failed on my G550 rendering it useless. I get fan and HDD action and all LEDs light up but NOTHING on screen... The CMOS battery is soldered or glued in. Where are the CMOS jumpers?

Hello,
I'm new to BIOS issues, and this one sort of takes the cake. I tried to update my Lenovo G550 (serial 2958)'s BIOS to the updated x64_18CN44WW_(2.53) bios, and the computer crashed most of the way through. Now I'm dealing with a bricked Lenovo. I understand that there are warnings about letting the computer go to sleep before updating the BIOS, which I did, but I simply didn't look deeply enough to find these warnings before I attempted the update. But that doesn't matter now.
What does matter is that I'm working with a Lenovo that needs a reflashed BIOS, and right now I'm working through the options provided by this website:
http://forums.mydigitallife.info/threads/2105-BIOS-Recovery-procedures
I've tried Method 1 with NTSF partitioning (on a 4GB USB stick), and Method 1 with FAT partitioning (on a 1GB USB stick), both with no success. I'm doing this with the 2.53 BIOS file from the lenovo website's updated installer, as I don't have the backup BIOS handy (it's saved on the bricked laptop).
I need some information to help me either fix my laptop. Specifically, does the Lenovo G550 (Serial 2958) definitely have a Phoenix BIOS? Are there any reports of a USB stick boot being used to successfully flash a bricked computer using the Fn-B boot method? Does the motherboard have a Joint Action Test Group port? Are there any 'legacy' BIOS files I should try to use available to Lenovo staff? What's the course of action a tech would take if I sent my Lenovo in for repairs?

T430 BIOS update failing with -s switch

I am attempting to update the BIOS on my T430 using the -s switch. I have downloaded version 1.20 from the Lenovo site. This version says that it includes a fix for the problem with -s. However, I am still unable to flash using -s. I get an error: secure flash authentication failed
Any ideas?

Hey there bdudle1,
Here is a forum post from a few days ago with the same issue. You can look and see if this information helps you out any.
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T430-Bios-update/m-p/839537#M65645

HP OMNI 10 5600eg - Bios update failed

The latest bios update on my HP OMNI10 5600eg failed. Now the screen stays black and I can't get into bios nor I can start windows. The device seems bricked. Is their anything I can do to recover the device? Regards, Michael

Hi @AndreasN , welcome to the HP Forums. I understand you are looking for an instructional to install Windows 8.1 Pro x 32 on your Omni tablet.
If you are saying that you want to install a retail copy of Windows on it, I do not have an instructional for you and I have never done it on an Omni tablet. I cannot guarantee you wouldn't have any problems, but I can give you a few things you will need. Here are the drivers you will need:
HP Omni 10 5600eg Tablet Drivers
If you have Windows 8.1 DVD's you would need a computer to make an installation USB drive to get it on your tablet:
Create installation media for Windows 8.1. There are many other instructionals out there as well, if you need more info.
If I am wrong, and you just mean to do a factory reset, these instructions cover that: Recovering Software on Your HP Tablet (Windows 8)
I hope this helps.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Tecra S3: BIOS update for Vista

I have a Tecra S3 notebook and I tried to install vista but it says i need to update my BIOS. Well I already have the latest version (v1.3) and no vista support.
Any help is appreciated
Thank you

Hello eddie
There is no much to say. If your unit has sticker Vista capable Toshiba will support it for Vista upgrade. When not I dont believe you will find Vista BIOS update in the future.
My Satellite M70 is also not Vista capable but I am really lucky and have preinstalled Vista on second partition.

Tecra A3: BIOS update 'rom file wrong szie' [sic]

If I try to update my bios, I get an error message 'rom file wrong szie' and yes that is the way it is spelt.
Also when I try to update the software for my multidrive - which Toshiba sent me the link for it - says: 'drive not found'. What's going on??

Hello
Tecra A3 is pretty new unit and it will be interesting to know why you want to make BIOS update. Is there any problem with it?
Which BIOS update doesnt run, windows or traditional one? If you have no serious problem, dont do it at all.
The issue with your multidrive is a little bit confused for me. Which software you should install?

Tecra A4 Bios Update failed!

Similar Messages

Maybe you are looking for