Tecra A4: How to make TV s-video out connection?

I have cable and i have connected
there is no signal also there is no any option for tv out or s-video in properties - advanced - display

Hi. I've also the same problem. the Svideo port on my Tecra M5 doesn't work. It was working but suddenly it didn't. I've checked everything from Cable to TV and also drivers. Everything is OK and also I've checked with another similar M5 Notebook. Please advise me if you have any idea. BTW, how can I check that the Svideo port is working properly?
Thanks

Similar Messages

HOW TO MAKE A REVERSE VIDEO IN IMOVIE FOR IOS

I woud like to know, if possible, in how to make a reverse video in my IPad.
Thanks to everyone!
G'day.

Searched for a solution and I found a video tutorial about this:
http://www.imoviehowto.com/imovie-ios-8-how-to-reverse-a-video-clip/

How to make the zoom in/out scale appear in the media browser ?

How to make the zoom in/out scale appear in the media browser ? My videos only appear as a file list (only the names) and the zoom in/out device is currently not in the media browser...

I meant that there is no "Icon mode" button or "List mode" button in my media browser. How to make them appear ?

How can i get HD video out from the lumia 900. ? ...

How can i get HD video out from the lumia 900. ? Is there some kind of gable. ? N8 has HD cable port..so where is lumia`s port. ?

Download Zune and start it, when started connect your Lumia 900 and you can now transfer mediafiles from the Lumia to your PC through a USB connection. For Mac use the Mac connector.
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

How to make a short clip out of the original one ?

Some days ago, I asked a question on editing a clip in this forum. The responder asked me to provide a few seconds of the clip for his examination. But I got stuck. I didn't know how to make a clip of a few seconds out of the original clip and that it had the exact same format and properties as the original clip.
Neither Premier nor After Effect have an ouput option such as "same as original source" .
So, my question is how to make a short clip out of the original one with everything the same properties as the original one.
Thanks in advance.

May be I haven't made myself clear
Sorry, but I think that I am still not following you.
I want to export and render the short clip to a new file which I want to have everything the same as the original clip. Just like I cut off a few seconds off it and that few seconds becomes an independent file.
OK, you have your original source file. It is complete and is also unaltered. If you want a "Copy" of it, just use Windows Explorer, or similar to make that Copy. If you want a separate file of your edited version of that source file (as it appears in the Timeline), use the WAB (Work Area Bar) to include just that edited instance of the source footage, and Export just the WAB. This will give you a separate file with the edits in it.
I still feel that neither is what you want. If you can step me through, maybe with screen-caps, what you have and what you wish to end up with, I can see the operation more clearly.
Good luck,
Hunt

How to make selection parameter gray out, not changeble mode

Hi Experts,
Selection screen having parameters, I am putting default values in that parametrs.
How to make this parameter gray out, not changeable mode.
Thanks in advance
mahahe.
See comments below
Edited by: Rob Burbank on Jul 1, 2009 12:43 PM

Hi,
For the parameters required, while declaring them use the MODIF ID, lets say you have choosen the modif id as SC1.
i.e. parametes: p_mat type matnr DEFAULT '100' MODIF ID SC1.
Then in the initialization event, code as below.
    LOOP AT SCREEN.
      IF screen-group1 = 'SC1'.
        screen-input = '0'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
It will work.
Regards,
Nangunoori.

How to make it repleatedly printed out by using timer??

Dear Friends:
I have following code to run, When I press R to repeat println, only 1 line print out,
But I hope to make it continueously print out.
How to make it repleatedly printed out until I press CTRL + C key ??
Thyanks
import java.util.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.io.*;
public class CertainAndRepeatTime{
public static void main(String[] args) throws IOException{
    int delay = 1;
    Timer timer = new Timer();
    ActionListener actionListener = new ActionListener() {
        public void actionPerformed(ActionEvent actionEvent) {
          System.out.println("Hello World Timer");
    System.out.println("What do you want (Certain time or Repeat time)?");
    System.out.print("Please enter \'C\' or \'R\' for that: ");
    BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
    String ans = in.readLine();
    System.out.print("Please enter ans=" + ans + " IsTrue= " + (ans.equals("R") || ans.equals("r")) +"\n");
    if (ans.equals("C") || ans.equals("c")){
      //System.out.println("This line is printed only once start...");
      timer.schedule(new TimerTask(){
        public void run(){
          System.out.println("This line is printed only once.");
      },delay,1);
    else if(ans.equals("r") || ans.equals("R")){
      timer.schedule(new TimerTask(){
        public void run(){
          System.out.println("This line is printed repeatedly.");
      },delay, 1000);
    else{
      System.out.println("Invalid Entry.");
      System.exit(0);
    System.exit(0);
}

The Timer is working fine, but because it runs in another Thread, your program is ending before the Timer can repeat.
The simplest way to make your program wait until it is force-quitted as you describe would be to make an infinite loop (although this isn't very good practice), like this:
    else if(ans.equals("r") || ans.equals("R")){
      timer.schedule(new TimerTask(){
        public void run(){
          System.out.println("This line is printed repeatedly.");
      },delay, 1000);
    while(true){} //This will make your main thread hang.
    }A better way, though, would be to listen again with your System.in reader until they enter a letter that means quit.

How to make a music video using flash

am trying to make a music video for a uni project, one of the things I'm trying to do in the video is to fade in a word at a time in whilst keeping them all aligned properly as a sentence - is there an easy way to do this?
Any other hints or tips on how to make a video but one especially for music would be much appreciated !! I'm just using Adobe Flash and NOT Adobe Premier, thank you !!

no, they would need to be created dinamically as the possibilities are unlimited,
I was thinking of saving the inputs in variables (starting in a) with previous value 0 following this logic:
if (a==0) {a=36}
else if (b==0) {b=36}
else if (c==0) {c=36}
where 36 is the frame where this button clip starts.
then, when the user is done i would do this at the end frame of each clip
if (a=/=0) {frame=a; a=0; goto frame}
else if (b=/=0) {frame=b; b=0; goto b}
my only problem here would be how do record the video...

How to make HP Mediasmart Video reads .MKV files?

Hi there. I've recently bought a HP DV7T-2000 notebook and I've got really excited about this product. It's really awsome! The only "problem" till now is that I can't play .mkv files using HP Mediasmart Video, even after installing the matroska codec. I can play .mkv files using any other video player, but HP Mediasmart Video.
Does anyone know how to make this work?
For the records, I'm running it over Windows 7 Professional 64 bits.
Thanks for the help.

Are you saying export my processed video to .movs or DNxHD and give to him? The terms are all new to me. When I last edited with FCP it was with DVCam footage captured from the cassettes. Would he be able to then import the audio from the SxS card and sync it on his time line with those kind of files?
Nothing was deleted....straight 1 hr 2 minute single take.... broken down to the smaller files both by the Nanoflash and the SxS card.. I would drop the soundtrack from SxS onto my time line and sync it up for him first with the noise processed Nano video files if I could figure out why it isn't following the video onto the time line? Why does the 1080 60P codec from the Sony NEX 5N still camera bring the audio along automatically and the file fromn the Sony PMW 320 does not? There must be a lot of EX1 and EX3 shooters here. Please, what do I need to do with the buttons or targeting or settings for the 2 audio tracks on time line for those files to have the audio come along? From the SxS files I imported, both the ones that say "CLPR" and right below that, "CUEUP.XML" play the sound in the browser source window.

How to make a highlight video from a DVD?

I want to make a highlight video from a dvd. How do I get this dvd into iMovie? I tried the import feature but I am getting an error stating it doesn't see any movies on the DVD.

Video calling is a feature offered by your service provider. You'd first have to sign up for the service then you'd need a phone that supports it. Currently, I'm not aware of any BlackBerry phone that supports it. The Chinese movie you saw might not have been technically accurate. Case in point, I saw the Green Hornet movie recently and he has a car that does loads of cool things. Turns out, if you watch the DVD extras, most of those stunts were fake.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

How to make a DVD video with bonus iPod ready vids included

I'd like to make a standard video DVD for playing in a typical DVD player. But somewhere on the disc, I was also thinking of putting on a bunch of iPod ready videos that people could just copy directly onto their hard drives.
I'm hoping someone might have some advice on how to get this extra content onto the DVD.
Thanks for any help.

Since the folder content is not going to be played on a set top player, you might as well simply add a menu with text to inform the user that the content is there. You might try using DVD@ccess links to get the content to play when in a computer, but to be honest, since you are providing video only I wouldn't think it worth the effort.
You could also consider linking to a simple HTML page that itself references the footage so that the user sees a familiar web browser and has a page with 'download' links on it. You'll need to create your microsite as you would any other web site of this kind, and then put it all in a single folder. Point your @ccess link to the single folder and the 'index.htm' page will load into the default web browser.... as long as the user has got @ccess installed on their computer.
Given the problematic nature of this piece of software, it is often not worth the effort. If you have access to a PC then you should look at Sonic eDVD as a far better alternative.

How to make an html5 video play from Internet Explorer 9?

Hello,
I have converted a swf eLearning video to html5 thanks to the cp converter. I can have the html output file played from Chrome but not from Internet Explorer 9. Could someone advise me, do I need some code to make it work? Thank you in advance for your help.
Emilie

One of the quick and easy fixes for your problem is to go into your source code and in the <head> change the following:
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta http-equiv="X-UA-Compatible" content="chrome=1,IE=9" />
<meta name="viewport" content="user-scalable=yes, width=360" />
<title>IntroVideo</title>
Where it says ,IE=9"/> simply change the 9 to an 8....
this tells IE9 to act like IE8 and makes all the video content way more accessable!
hope this helps!
Cheers!

How to make a slideshow/video similar to the "photo a day" videos?

I was just wondering what the best way to make a slideshow/video simial to the "photo a day" videos like this one: http://www.youtube.com/watch?v=6B26asyGKDo
I'm not looking to do one of my face, I just want to do one of all my photos set to music, its a couple hundred pics and I want them to go just as fast (blink and you'll miss them) with no transitions or effects. (It's kind of the same, a progression of sorts).
I have the standard iphoto, power point, imove/idvd stuff that comes with the mac, but is there something else that I should use?
Thanks for any help!

For editing at the level of control - less than once second edits - you'll need to use a movie editor with a timeline. Imovie for Final Cut.
Regards
TD

How to make an object getting out of the screen ?

Hello everybody !
I am creating a game introduction with Flash pro CS6 and here's is my problem.
I want a object in my animation to leave the screen, but I dont know how to do it.
Is there for example, a way to delimited the working area, so that when I make an object go out of this area, it does not appear in my final animation ( no matter the format, .avi, .mov, spritesheets ... ) or can eventualy be "cut" ( if I make my object half inside the working arear and half outside ) ?
Is there an other way to do this ?
Thanks !

Using a mask might be one way.

How to make Text filed Grayed out / disabled

Hi,
I have a text field and I have set the following property..
HTML Form Element Attributes:- readOnly=trueThis field is read only now.
HOW to make this field looks like a disabled field, some thing like filling the background with light gray color.
Thanks,
Deepak

Thanks Andy..it worked..but one clarification.
when I am using the following code as suggested by you, I am getting the text box border, as well as gray color in the box...THIS is perfectly fine which I wanted.... (This will make that field always read only)
Element Type - Text
HTML Form Element Attributes - readOnly=true style="background-color:gray"NOW I want my field to be read only based on condition.
So I am using the following code, This is displaying the gray color, but the border of the text box is gone, so it doesn't look good. How can I keep the border too..
Element Type - Text
Read Only Condition Type (condition - Expression1=Expression2)
Read Only Element Table Cell(s) Attributes - style="background-color:gray"Also, How to make FONT bold, I am using - font-weight: bold; - but it's not working.
and finally , can I define this style in custom.css file and then how to call that stylesheet here...????
Thanks,
Deepak
Edited by: Deepak_J on Oct 8, 2009 11:28 AM

Tecra A4: How to make TV s-video out connection?

Similar Messages

Maybe you are looking for