Tecra A8 blue screen

Tecra A8-S8513 running XP getting blue screen STOP: 0X0000007E I have tried F8 trying to get to safe mode - keeps going back to blue screen no matter what I select

Tecra A8-S8513
Bug Check 0x7E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
See if any of this applies. Report back what you learn.
Advanced troubleshooting for general startup problems in Windows XP
How to troubleshoot a Stop 0x0000007E error in Windows XP
Was this just after installing a service pack (2 or 3)?
-Jerry

Similar Messages

Tecra A2 - Blue screen crashes and restarts

I have a Toshiba Tecra A2 Laptop. Every now and then it will show a blue screen and crash. It mentions something about a "memory error" or "physical dump" something along those lines. I have used the recovery tool and formatted everything, and not installed anything new, I still get these random crashes. What could be the problem? No new drivers have been installed either, just the normal recovery software. Please help! Thanks

Hi
As far as I know sometimes the blue screen appears because of serious software error or a hardware malfunction. In your case it could be a memory modules fault. In my opinion you should check your memory modules and if its necessary you should replaced it.

Tecra 9100, a blue screen appears

When I start up Novell GroupWise on my Tecra 9100 a blue screen appears? Very weird. Can anyone help me to stop this.

ditto--happened on my machine too. I found out that this blue screen can appear if True Color (32 bit) is selected under Colors in Display Properties. Both of you will have to download the update for the Display Driver from the Toshiba support pages. There is a txt file provided for instruction

Blue Screen on Tecra A9

Hello
I've just purchased a Tecra A9... which was pre-installed with Vista. For three weeks I kept minimal software on it...
opera
thunderbird
firefox
editplus
smartftp
and it blue screened on me about 4 times a day. Editplus (a text-editor) would also frequently crash... seemingly when the touchpad was being used.
I then moved to XP. Same thing.
Toshiba graciously replaced the laptop for me... I've now got a new one with XP on it... and it's blue-screening on me 4 or 5 times a day.
Does anyone have any idea what could be causing these crashes? Or where I'd start looking?
Cheers
Nick

Best thing to do is to try an make sense of the bluescreen error. When this happens it will display a load of error codes, usually in the form of 0x0000000 or something like that where the zeros after the x are replaced with other numbers or letters. Now normally the machine is set up to reboot as soon as you get a bluescreen error so you need to set it otherwise.
To do this you go to the system properties by right-clicking on the My computer icon and then click properties. Then click on the Advanced tab and then click on Settings in the Startup and Recovery section, in here untick the box next to Automatically restart and then apply this by clicking OK.
When it next bluescreens it should not reboot and then you will be able to read the error message and make a note of the error codes. From here i would either post the error codes on here or use my best friend Google and see what results you can find on there in regards to the error codes and see some suggested fixes.
Hope this helps a little but it is a weird issue as you are only having it with Toshiba laptops. Also if i were you i would look for harware similarities/differences between you Toshiba laptops and the other ones you have used.
Again, hope this helps,
Chuck

Blue screen of death on Tecra A4-S211

Help!!! Can not get the laptop to boot. Keep getting a blue screen that says,Check to make sure new hardware or software is properly installed. Continues on with advice from there like Disable BIOS memory options, booting in safe mode, etc. I have tried all the safe mode options and have gotten to the desktop twice for ohhhh 37 sec, before it locks up and shuts down. Is there anyway to access atleast the control panel to remove un-needed things, or am i going to have to do use the system recovery option in start up? (press and hold "0" while powering up) My son picked it up used at a garage sale, thinking we could clean it up and use it, so of course no disks of any kind.
Thanks for atleast taking a min to read this. Am hoping someone out there knows how to help.
Keep smiling makes people wonder

Tecra A4-S211
Start here.
Advanced troubleshooting for general startup problems in Windows XP
-Jerry

Tecra M3: black screen on start, vertical lines on external monitor

Hi all,
I've been searching a lot on the Internet for a solution to this specific problem I have but could not find a thread
with exactly the same problem.I have a Toshiba Tecra M3 with WinXp SP 3. Two weeks ago I encountered problems with starting up. After a couple of times restarting it would work. From then on it became worse... When I try to start up I see no splash.. the screen stays black. If I press the power button I hear the fan and the CD-drive but no screen. It's totally black. I know its working because I can go (blindly) into setup; press end, then Y and then enter. The notebook will restart but still no screen.
I hooked it up to an external monitor. Pressing Fn and F5 enables switching. The external monitor shows different
vertical lines in multiple colours. They change if I go to setup or try to start windows.
Does anyone have a solution to these problems?

Im having a similar problem,
I get the toshiba logo come up fine,
Then a bunch of black and white dots (its windows when has crashed and gives you option in safe mode) but you cant make out any of the text, I only know this because Ive delt with computers crashed before.
When windows XP SP 2 starts up basically there are white bar like dots vertically up and down the screen. Then finaly goes blue screen of death and restarts.
I have changed HDD with my old operating system so its not a virus, Ive taken out the ram, which is 2 x 1gb sticks. Ive tested them individualy and together yet I still get the same problem I mentioned above when I start my computer.
So its not the HDD or a virus, its not the ram, what is the problem here? The monitor looks fine with the toshiba logo (no dots up and down)
What do I need to fix it ? Whats broken?
Anyone who can help much apprciated.
cheers

I just started using this again and getting blue screen often

Tecra M2V-S330 Running Windows XP Service Pak 2 I just started using this notebook again as my wife took my new one over. It works alright but I keep getting blue screen and it shuts down. I have to restart it all the time. I cant read the blue screen errors but I am pretty certain I need a new hard drive. Can anyone help? I think I should buy a new hard drive. I have the backup disk but on this unit I cant find the hard drive? On my other notebook I found the hard drive unscrewed and replaced it no problem. This one is weird I know its a 40gb but can I put a 60 in? The notebook says the hard drive is MK4025GAS Any help would be awesome!
Message Edited by TECRAM2VS330 on 02-05-2009 07:03 AM

Tecra M2V-S330
I cant read the blue screen errors..
The default for a Stop error is to automatically restart the computer. Let's fix that so you can see the error message.
Open System Properties (sysdm.cpl). On the Advanced tab, click the Settings button at the bottom under Startup and Recovery. Clear the Automatically restart check box.
Report the Stop errror and any file name mentioned on the blue screen.
-Jerry

Windows Blue Screen Error Message Appears As Soon As IPod Connected

Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx

Mini DVI to Video: blue screen after disconnect

Hi,
can't find a solution: after disconnecting the mini dvi to video-adapter I always get a blue screen and I need to restart my brandnew 20" iMac.
I use it to connect my (old) television via s-video. It is clear that I bought the right Mini-DVI-Adapter.
Can anyone help or has the same problem?
iMac 20" Mac OS X (10.4.8)

Thanks for the help. I'd figured out that shutting it off would keep it from happening and was probably a "best practice," but since 90% of my television watching is from my eyeTV, I'd be turning it on and off a lot.
The only problem with leaving the setup plugged in, is that as soon as the mini DVI cable is plugged in, the resolution on the iMac resets itself to super-large fit for television mode and becomes virtually unusable as a computer, thus when I want to use my computer, the cable has to be unplugged....unless of course you know something I don't
Thanks,
Shaun

My iPhone would just randomly give me a blue screen and then restart--did that a bunch of times between Tuesday and last night. As of last night, it WILL NOT come back on. iTunes says it's in recovery mode....what does all of this mean???

Tuesday night I was texting a friend and when I went to open her message, my screen went blue and restarted. I just wrote it off as weird and went on about my business. Later that night, I tried to turn on my phone and it would not turn on. I plugged it up, held down the power button, and pressed the home button all numerous times. I looked online and it said to do a "hard reset" by holding down the power and home button at the same time--my phone then came on. Throughout Wednesday, it would give me a blue screen and restart--nothing major just really annoying. I took it to the local Verizon store where I bought the phone from and he said that it was some type of hardware defect and I was still under my year warranty so I could get a new one for free--the free phone won't be here until tomorrow, Saturday. I took it home and it didn't give me any trouble for a couple of hours. The next day it was cooperating and then I left town for a little while and it acted up (blue screen and then restarting) a few times. When I got home, it acted up again and so I restarted the phone and it was working fine. A few minutes later, I tried to check my messages and the phone was off again. No matter what I do, my phone will not come back to life. It had at least 45% battery last time I looked at it. I decided to plug the phone up to my computer and see what it did--my computer recognizes that there is a phone hooked to it and it says that it's in "recovery mode". It also said that if I'm having issues with my phone, that I need to reset the phone via iTunes. I guess the questions that arise are
1. Why is my phone doing this?
2. If I reset my phone, will it go back to working again? I ask that because I don't want Verizon to charge me $300 when they send me the replacement phone and I won't need it (assuming that the phone decides to work once it's been reset).
3. What type of hardware defect is this that is causing this issue, not only with my iPhone 5S but others as well?
4. Shouldn't people be notifying Apple and letting them know that they need to fix this issue?
5. Should I report this issue to Apple even though I didn't buy the phone directly from them, but through Verizon?
Any help that anyone could give me would be greatly appreciated! This whole situation has me stressed out and seriously confused.

Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H.

Blue Screen, kernel_data_inpage_error, disk drives missing on reboot

I just bought a new laptop, ASUS ROG G750JW, and installed a Mushkin Chronos 240GB SSD. I clean installed Windows 8.1 Pro on the SSD, and kept the original 750GB HDD, as well as a 500GB HDD, as secondary drives. I have been having rather random blue screens.
I had to disable auto-restart to see the error message: kernel_data_inpage_error.
The fun part is that when I soft restart after the blue screen, my hard drives are missing from the BIOS. I have to completely power down and then restart it for the HDDs to be detected. Since all 3 drives go missing, I can be rather confident that the problem
is not caused by any one of the drives (i.e. my SSD is not defective).
The problem originally occurred when I was installing Office 365 - the laptop would blue screen every time I tried starting the installation. However, each attempt would proceed a little further and eventually Office installed, so I can't use that as a reliable
test. Other occurrences have been, as far as I can tell, completely random. I was noticing that the BSOD occurred often enough during Windows Update installs, but I could not find any significant correlation when I compared my event log to my update
log. I was able to install the most recent Windows 8.1 Update released this Tuesday with no problems.
I have run diagnostics on all of my drives, which come back completely green. I have run chkdsk and sfc /scannow, none of which reported any errors. I have also run Driver Verifier according to the instructions
in this article which did catch several "0x000000c4" bug checks, which I was able to narrow down to the miniport driver.
My last action was to disable checking this driver in Driver Verifier, and I have not since experienced any problems. I have just finished running a 2+ hour long stability test using AIDA64 portable trial version, which caused no problems.
Since my drives go missing when this happens (whether as a cause or effect, I do not know), I have no memory dumps or event logs to share. I have since configured Windows to save memory dumps to my laptop, but with no reliable way to cause the blue screen,
I've been unable to capture a dump yet.
Soooo who wants to help me fix this? I've been offered warranty RMAs by both ASUS and Mushkin, but until I can reliably reproduce the error and confirm the cause, I'm not sending anything back (cause I don't know
what to send!).

Jay
If you don't have dmps lets take a look at your event viewer logs
Please provide us with your Event Viewer administrative logs by following these steps:
Click Start Menu
Type eventvwr into Search programs and files (do not hit enter)
Right click eventvwr.exe and click Run as administrator
Expand Custom Views
Click Administrative Events
Right click Administrative Events
Save all Events in Custom View As...
Save them in a folder where you will remember which folder and save as Errors.evtx
Go to where you saved Errors.evtx
Right click Errors.evtx -> send to -> compressed (zipped) folder
Upload the .zip file to Onedrive or a file sharing service and put a link to it in your next post
If you have updated to win 8.1 and you get the error message "the system cannot find the file specified" it is a known problem. The
work around is to edit the registry. If you are not comfortable doing this DONT. If you are, backup the key before you do
Press Win+"R" and input regedit
Navigate to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/Analytic"
Wanikiya and Dyami--Team Zigzag

Blue screen crash when connecting iPod

Whenever i plug my ipod into my computer, windows goes to a blue screen with the following message...
A problem has been detected and Windows has been shut down to prevent damage to your Computer.
If this is the first time you have seen this stop error screen restart your computer. If this screen appears again follow these steps.
Check to be sure you have adequate Disk space. If the Driver is identified in the stop message disable the driver or check with the manufacturer of the driver updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates.
Disable BIOS memory options such as Caching or Shadowing. If you need to use Safe Mode to remove or disable components Press F8 to select advanced start up options then select safe Mode.
Technical Information
*stop:0X0000007E (0XC0000005,0X00000000,0XF7A9B7C8,0XF7A9B4C4)
Beginning dump physical Memory
Physical Memory Dump Complete
Contact your system administrator or technical support Group "
This all started happening when i was away in America and my dad plugged his iphone into my pc to try and get some of my music, which caused the same crash. My ipod plugs in fine to his computer though. Any advice much appreciated

Apple Genius, behave yourself.
Here's the article how to fix this problem: http://support.apple.com/kb/TS1502

Error 13 = Blue Screen of Death?

Thought I'd try this board and see if anyone knows anything about 'error 13' and Panther.
I have been plagued by this error message which pops up whenever I try to print from either of my printers or burn a CD. This all happened after I tried to load a demo version of Adobe Illustrator CS2.
Over the last day I have tried the following:
* deleted the apple.com.print preferences
* reset the PRAM
* unplugged, unpowered and restarted the printers and their USB connections
* deleted the printers from the print setup utility and tried to reinstall them (but there too I get the 'error 13' message. Printers won't load but they do show up as if they loaded. Just won't work, that's all.
* tried logging in as a new user, and then the printer message is "Not enough RAM" to print.
* repaired the disk permissions from the CD
Generally I've done everything I can think of... except to reload the OS, which I hesitate to do because I have to first load Jaguar, then the Panther update, then the other updates. Last time I tried that things didn't quite work out.
I do have an external backup drive, which also got corrupted as I tried loading the Adobe Illustrator CS2 on that disk too. Dumb I know...
So... anyone know what 'error 13' means?
Is 'error 13' the Mac equivalent of the Windows Blue Screen of Death?
Thanks for any input...

Hello Pawel,
I have looked over the service request you mentioned about acquiring 2 PCIe-6537 at 20MHz sampling rate on all 32 lines. In order to narrow down this issue, I think it would be best to try only acquire from both cards without doing any triggerring etc. Also when performing this test, I would only want to acquire from 8 channels on both cards to see if this reproduces it. If this works, we can slowly add more elements to narrow down what the issue is and make us more effective to solve the problem.
I also wanted to ask if you have tried this setup on another machine and if it worked.
Along with this, have you tried to create two Digital Tasks in MAX and try to acquire for the same amount of time to see if the issue reoccurs here? This would tell us if this problem is connected to the driver/computer or LabVIEW.
Jim St
National Instruments
RF Product Support Engineer

Windows 7 Blue Screen - Random Shut Down

I'm having problem with my Toshiba Satellite L505 which randomly shows a blue screen prior to shutting down and restarting. I have use my system recovery disk to return my computer back to it's original state. The computer worked fine for a couple of month but has crashed again. Below is a sample of the blue screen messages prior to shutting down:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: ntoskrnl.exe
KMODE_EXCEPTION_NOT_HANDLED
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000001e (0xffffffffc0000005, 0xfffff800032a526b, 0x0000000000000000,
0x000000007efa0000)
*** ntoskrnl.exe - Address 0xfffff800032c4c40 base at 0xfffff8000324f000 DateStamp
0x50e79935
2nd blue screen crash message
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: PCIIDEX.SYS
KMODE_EXCEPTION_NOT_HANDLED
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000001e (0xffffffffc0000005, 0xfffff800033c6cda, 0x0000000000000001,
0x0000000000000018)
*** PCIIDEX.SYS - Address 0xfffff88000e879d4 base at 0xfffff88000e86000 DateStamp
0x4a5bc114
Does anyone know what this means and would be able to help.

Hiya
Run a full computer scan with your antivirus software. virus Backdoor.NTHack. may be the problem, and it runs Dl.bat in folder InetPub\Scripts.When you boot up the computer, go to task menager (CTRL+ALT+Delete), look if you have this runned: Firedaemon.exe, Sud.exe, Os2srv.exe, Mmtask.exe.
2. If you have a CARD READER than go to bios "Integrated Peripherals" and set Legacy USB storage detect to DISABLED
Let me know if you get any more problems

Blue Screen when syncing IPOD

I have been perusing the threads and I am beginning to see some common problems with a few others out there. The Blue screen STOP messages seem to be happneing to others.
I have tried everything including updating windows with the newly released patch today.
Do any of you "experts" out there think that this problem might have to do with the recent windows vulnerability and the long awaited patch released today?
There are lots of news reports out there indicating that this particular windows flaw was very critical and my problems started right about the time the flaw was recognized.
I restored my IPOD as suggested with the 5 R's and now I am bummed because my IPOD is empty and I finally got my PC to recognize the IPOD but everytime I resynch all of my 37 gigs of MP3s to my IPOD, my PC crashes after about 100 MP3s and gives me the Stop message and this error string -
STOP: 0x0000007E (0x0000005, 0xDF1BA804, 0xF89FB89C, 0xF89FB598)
Can anyone please help us?
thanks
Zep

Not sure I'd care to be called an expert (or even an "expert").
As the discovery of this "flaw" coincided with the onset of your problem I rather doubt it is the cause, since the flaw must have existed before it was discovered. Blue screens are often (but not always) caused by broken drivers or memory problems. If your OS is generally stable, then it does tend to point towards some sort of a driver issue. It seems to me that the 5R's tends to focus attention on the iPod (I guess apple presume that the OS is OK or they just don't want to go there!). Some people might argue that no (normal) device you attach to the comp should cause it to crash, but that is rather academic for you right now. My suspicion is that it is a problem with the comp - well a device driver or memory. Another possibility is that there is more than one problem - and whichever problem happens first triggers the other.
I doubt if the latest Microsoft patches will fix your problem - but who knows! I'd download and run a decent memory test program (e.g. Memtest86) and make sure you eliminate that as a cause. Are you in a position to attempt a restore? That might be worth considering. Otherwise, try doing a complete uninstall of iTunes and the IPod software and starting over. As a last resort you might need to consider re-installing windows.
I guess you've already done all of the obvious comp things (like running chkdsk). Have you, or are you able to test the iPod on a different comp?

Tecra A8 blue screen

Similar Messages

Maybe you are looking for