Tecra A9 - cant see DVD drive.

My DVD drive appears to work when a disk is inserted i.e., makes the usual spinning noise for about 20 seconds, but then stops. It does not show when a CD is inserted on "My computer". Rebooted but still no success. Device Manager says "Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)". Any ideas?

Hi
You have to remove the upper and lower filters from the registry key
But before you will do this you should access the device manager and should remove the CD/DVD drive.
Then start the registry.exe and remove the the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Finally reboot the unit!

Similar Messages

Permissions issue when seeing DVD drive in Encore

Hi,
I currently have an issue when using CS4 Premiere Pro Encore in that I can see the DVD drive available (build) when I have admin rights to the machine, but when I change those admin rights to Power User, the DVD drive is not seen by Encore. I am using the Roxio DE 10.3 (Dell's cut down version) as a DVD/CD writing software.
I would be very grateful for any help on this issue.

As far as I know, Premiere/Encore REQUIRE Aministrator right to operate fully
Also...
Things and Software to AVOID when authoring/burning a DVD
Read all links/sub-links to create a "best" burned disc
Start --> http://forums.adobe.com/thread/608660?tstart=0
Plus a Microsoft note http://support.microsoft.com/kb/314060
Plus...
Encore Roxio component problem http://forums.adobe.com/thread/400484?tstart=0
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
Long File Names Cause Crashing http://forums.adobe.com/thread/588273
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/

865PE BIOS can't see DVD drive

Hi Folks,
I'm having trouble getting my BIOS to see my DVD burner so I can boot from it (It doesn't show up as one of the boot choice options). This IDE drive is connected to my PCI Maxtor/Promise Ultra 133 TX2 IDE controller. I do have 3 IDE and 2 SATA harddrives connected, and all 5 of those devices are available as a boot choice, just not the DVD drive.
Any suggestions greatly appreciated :)

dont think that has a bios in the sense you mean like a raid card
it has one tells it about drive settting it senses as a drives connected
but not like a raid card were control plus f gets you in its own bios
just hook it the dvd up to the boards ide
and put another none boot drive on the promise

HP Notebook 9628nr does not see DVD Drive no optical drive in device manager

for some reason it does not see the dvd drive this happen after I flash the bios which was recommended from the HP website can anybody tell me how to fix this problem

Im having a problem like this, DVD not appeare in my computer and system devices, after that a webcam will broken also( unknow device USB); solve: damaged motherboard, one of bridges- north probably
regards
and watch your motherboard properly

Encore CS3 does not see dvd drive

When I log onto a pc in our labs as a regular user and open Encore the dvd drive is not seen by Encore.
Logged in as an administrator, I can see the dvd drive in Encore.
Does anyone know how I can resolve this problem without giving admin rights to students?
Thank you for your time and assistance.

As far as I know, Encore is not written as multi-user, the operator must have full use of the computer

Tecra S2 - NEW cd dvd/drive

Hello,
I just put in a new cd/dvd drive into my laptop tecra s2.
Only one problem, when i startup in xp the cd/dvd drive is working perfectly, but i need to install vista on my machine and my bios doesn't recognize this drive. When i change boot priority to first cd/dvd he just skipps my cd/dvd drive and loads as usual.
help please

Yes, I tried another bootable cd, but didn't work.
I just put back my old cd/dvd drive and then came the word, press any key to boot from cd/dvd...
Strange actually, the thing didn't work under xp for over a year and now i just booted from it. Probably a software issue that I couldn't resolve with previous one.
Anyway, the problem with the new cd/dvd could have been that my BIOS was outdated and/or too old for this new drive.
Problem is fixed so thank you
Message was edited by: mojodt

Re: Satellite A200-209 - Windows 7 can't see DVD Drive

Hey
Ive reinstalled my PC (again) from Windows 7 to Windows 7 and some time after i got this problem.
My DVD Drive is "unseenable" by Windows and it cannot read any disks.
I think its something about drivers, but i cant find any DVD driver :P
THX.

Hi
Your message is a little bit confusing.
You mean the CD/DVD drive is not visible in MY Computer?
In such case Ive got a solution for you.
In most cases its upper & lower filter issue.
You would be able to solve this by deleting the drive from the device manager and to remove the upper and lower filters from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}

Trying to see DVD drive through DVD sharing. iMac does not see MacBook. DVD sharing is ON.

I have an iMac with a non-working DVD drive and I'm trying to install Snow Leopard from my MacBook's DVD drive. I have turned DVD Sharing ON but the iMac does not see the DVD drive in Finder's Shared Devices. I have tried FireWire, LAN through TimeCapsule and WiFi. Am I missing a step?
The iMac and MacBook are both late 2007 purchases and have 10.5.8.
Thanks for any help.

Two commands you need to type in terminal on the computer that has the dead drive.
Disk sharing like the macbook air does is one of those things that's included in all OS X's on all computers, but that is not enabled. (I think it's cause apple doesn't want to have to support it on more devices that they absolutely have to)
So here's how you enable it.
In your Utilities Folder, open Terminal
copy and paste each line:
sudo -s
*type your password*
defaults write com.apple.NetworkBrowser EnableODiskBrowsing -bool true defaults write
com.apple.NetworkBrowser ODSSupported -bool true
shutdown -r now
Okee dokee... That last command will restart your computer, then you're off to the races!

HP Pavilion dv9925nr laptop unable to see DVD drive.

A friend of mine has this laptop that is unable to recognize CD or DVD
installed on this Laptop. This device doesn't show up in device manager
or BIOS setup at all. So how do I correct this problem? The laptop is
running Windows Vista home.
Thanks in advance
George H.

Try this. From Vista, got to this website:
http://support.microsoft.com/kb/314060
Go to the Resolution 2 and run the CD/DVD drive autofix tool. It will work online and try to correct some software issues that might be blocking the drive from working.
If that does not work post back and we can walk you through some other possible repairs and ultimately it may just be a bad drive that needs to be replaced. We can help with that, too.

Tecra 8000 SD 2102 DVD Drive Problem

Hi
I have a Tecra 8000 with a sd 2102 drive, the drive can be used if I boot from a boot disk but has driver issues when used in Win 2k. Anyone have any ideas what the problem is?
Dave N

Hi,
at http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home you will find some further informations about your drive!
Choose your drive and download the device driver. This should solve your problem!
Bye

VM Fusion Cant see external drives in XP

I am new to the Mac world. I haved installed VM Fusion to run XP but windows does not see any of my external devises. I have tried both a thumb drive and a external HD. I can see both of the devices on the Mac side. My Mac is running Tiger.

Since Fusion is not an Apple product, you'll probably want to post your question in the VMWare Community Forums:
http://communities.vmware.com/community/vmtn/desktop/fusion

Satellite Pro L300 - DVD drive error code 10 on Vista.

Can't see DVD drive on "my computer" Under device manager its showing drive but with yellow triange, after looking at info, the device status is "This device cannot start. (Code 10)" tried restarting 2 times. Thats not working.
Also cheaked drivers, on my computer and internet, windows is saying there up to date and im running the latest.
Tried to uninstall drive and restart thats failed.
When instering a disk the drive does move and spin the disk, so im hoping its a technical issue and doesnt need new drive.
Any help is welcome
thanks

Hi mate
Dont worry it seems its just a registry issue.
First of all remove the CD/DVD drive from the device manager list.
Then go to registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
+HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}+
Details here:
http://support.microsoft.com/kb/270008/en-us
Then reboot the notebook.
Wait until the OS has recognized the CD/DVD drive again and check it.
Greets

After installing the windows 7 on the Macbook pro, i accidentally disabled the Macintosh hd and Recovery Hd and now now cant see them on start up

After installing the windows 7 on the Macbook pro, i accidentally disabled the Macintosh hd and Recovery Hd and now now cant see them on start up
I need to boot to macintosh but i cant see the drive nor to restore to the fastory settings through recovery HD, What can i do

hold down the option key during boot it give you the option of what parition you wish to boot into

HT204350 I have a Mac Book Pro with 10.6.8 and want to back up my files using a flash drive. It says I did it but when I tried to check on my other Mac - an I Mac with 10.5.8, thedata does not seem to be there. I cant see photos, etc.

I have a Mac Book Pro with 10.6.8 and want to back up my files using a flash drive. It says I did it but when I tried to check on my other Mac - an I Mac with 10.5.8, thedata does not seem to be there. I cant see photos, etc.. It shows the backup as a file and shows various system info. but there are no photos or other files shown.
Thanks for any advise.
Mike

A PowerPC Mac, if that's what it is, won't be able to see an Intel Mac's formatted data. Also ExFat formatting is not supported by 10.6.3 or earlier. I would try viewing the backup on another Intel Mac with at least 10.6.4. If it isn't there, then the backup never really took place. I much profer a hard drive with Carbon Copy Cloner.

USB drive connected to airport i cant see it??

Hello all, i have an airport extreme. network is all setup fine. I have a USB drive connected to the airport setup for timemachine backups. What i would do is turn it on every week for the day and all my mac would backup to it. Last night i turn it on for my backups and none of my macs seems to be able to find it. Well today right out of the blue the imac suddenly sees it and runs a backup. But i cant see it with the macbook pro. I double checked the setting on the airport and dont see anything out of place. I can however see the drive in finder but when i click on it system tells me it cant connect. Any suggestions?

WesternCanuk wrote:
Apple is now forcing me to purchase a time capsule as they do not support puggin in a USB drive.
it's not new. this information has been available for some time.
Now this worked perfectly
it did (and does) so for many users. it just means is that, if you run into problems (as you do now), there will be no support from Apple.
I now have to physically connect my usb drive to each of my computers to have them back up?
no. you'd connect the drive to one machine and let the other Macs back up to it via your network.
printer i suppose ?
yes. and HD's for sharing files across your network - just not for TM backups !
JGG

Tecra A9 - cant see DVD drive.

Similar Messages

Maybe you are looking for