Tecra A9 - Connecting two external displays using Express Port Replicator

Hi,
I have a Tecra A9 and Express Port Replicator.
I'm trying to connect 2 external displays, one connected on the notebook output and the other connected on the docking station (notebook lid closed, not using the notebook display).
I can only get one to work, does anyone know if this is possible?

Hi
I think you want to connect one monitor to VGA and the other to DVI port.
Is it right?
Well, I found this doc:
http://aps2.toshiba-tro.de/kb0/TSB7B0201000CR01.htm
It depends on the used Tecra A9, if you can get a picture on the DVI out port on the Express Port Replicator (PA3508E-1PRP) or not.
The DVI port on the on the Express Port Replicator is only supported on machines with ATI or nVidia graphic card.
If you have a INTEL graphic card the DVI port on the on the Express Port Replicator is NOT supported.

Similar Messages

  • How tow connect two external displays that are not mirrored and turn of the retina display

    Hello,
    I have two questions:
    1.  Is it possible to use two external displays either mirrored or not and turn off the retina display, and if so how it is done?
    2.  Is it possible to close the MBP and use an external keyboard while using two external displays?
    I am using a music production DAW Persons Studio One-2 Pro and it would be great to be able to have this type of a setup.
    Thank You,
    Breezinabout
    Macbook Pro  15" Retina display I7 2,3mz 500gb SSD late 2013  OSX Yosemite 10.10.1

    Hi Breezinabout,
    The MacBook Pro Late 2013 retina display model will support two external displays. See this specifications page for reference -
    MacBook Pro (Retina, 15-inch, Late 2013) - Technical Specifications
    Specifically -
    Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on up to two external displays, both at millions of colors
    And -
    Thunderbolt digital video output
    Native Mini DisplayPort output
    DVI output using Mini DisplayPort to DVI Adapter (sold separately)
    VGA output using Mini DisplayPort to VGA Adapter (sold separately)
    Dual-link DVI output using Mini DisplayPort to Dual-Link DVI Adapter (sold separately)
    HDMI video output
    Support for 1080p resolution at up to 60Hz
    Support for 3840-by-2160 resolution at 30Hz
    Support for 4096-by-2160 resolution at 24Hz
    You would, if you wish, turn off the internal display by closing the MacBook Pro, which is called "closed-clamshell" mode. It requires you to have an external keyboard and mouse. See this article for further information -
    How to use your Mac notebook computer in closed-clamshell (display closed) mode with an external display - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Possible to Connect Two External Displays?

    At work I have two 1600x1200 LCD displays connected to my G4 MDD and I've become quite attached to them and truly feel the extra real estate increases my productivity.
    I'm due to get a new system and would like to get a laptop rather than a desktop system since I occassionally work from home and would like to just have one machine for everything.
    The only thing holding me back is the unavailabilty of using dual displays. Here are the only solutions that I know of, but not that I am interested in:
    o use the laptop display with an external display (problem: I would want my two displays to be the same size, and the laptop display would be too small for my taste)
    o use one of those matrox dual display external boxes (problem: uses vga but my LCDs are DVI and I'm not interested in sacrificing quality)
    o get a huge display to take the place of two, like the 30" ACD (problem: too expensive, and already have two nice 21" displays)
    So ... just hoping someone has some other suggestions. If nothing like this is available now, does anyone know if this sort of capability would or could ever be supported? Thanks.

    Thanks for the quick reply, but see my second bullet, that what I meant by the "matrox thing". If it were DVI based I'd give it a try, but my understanding is it is VGA.

  • Can i connect an external display using HD3000 after the discrete gpu has stopped working?

    Say for some reason the HD 6490m is fried and I can only use the HD 3000; will I be able to connect the laptop to an external 1080p display via thunderbolt?
    Technically it should work, i know. But i've tried it with gfxCardStatus 2.3 and nothing happens until i allow the radeon to work. My question is: after the amd stops working, will the computer allow the HD 3000 to connect to an external display? Is there some kind of limitation so that only the 6490m can use the thunderbolt port?
    Early 2011 15" MBP running 10.9.4
    i7 2635qm
    Cheers!

    Thanks for the fast reply!
    So i assume this is because Apple uses a custom processor or because of the motherboard that inhibits it somehow, right? I'm asking that because some hd3000 chips in other systems are able to support a second display.
    Anyway, thanks a lot. I will be careful not to lose the amd then

  • Any way to connect two external displays?

    Hello,
    I have a quick question about connecting my PowerBook G4 15'' (machine model: Powerbook 5,6) to some external displays.
    I am trying to connect it to both a Samsung Syncmaster LCD and my TV.
    Currently, I am able to connect to each successfully, but only one at a time.
    My Samsung syncmaster LCD is connected via the DVI port on my powerbook, and using the DVI to VGA adapter, since the Samsung LCD is VGA. My TV is connected via S-Video, though I do have the s-video to composite adapter that came with my powerbook if it makes a difference.
    Anyways, my problem is I want to be able to use all three displays at once (the powerbook screen, my samsung LCD, and my TV), but i can only get one of the external displays working at a given time, and have to unplug the DVI (samsung lcd) to get the TV to be detected and activated as an external display.
    Any suggestions will be much appreciated. If there is some adapter I need to buy to make all this work, thats fine, just tell me what it is.
    Thank you for all your time.
    Regards,
    Matt Ellison
    PowerBook G4 15" (machine model: Powerbook 5,6)   Mac OS X (10.4.3)  

    This solution was previously pointed out to me on the 17" PowerBook forum. I don't have one and don't know how well it works. Last I saw they didn't have drivers for Tiger, yet.
    http://www.villagetronic.com/
    I expect you would hook your SyncMaster LCD to the VT Book and then use the S-Video port on the PB to connect the TV.

  • 27" iMac and two external displays -- using both TB ports best?

    Greetings to all.
    Currently I have a 2011 Mac Mini to which is connected a 30" Dell display via a Dual Link DVI adapter, and another Dell 21" display via HDMI. I'm planning on getting the 27" iMac and want to check the best way to connect these two displays. While the 30" will still use the Dual Link DVI adapter, should I connect the 21" display via the iMac's second TB port, or via HDMI?

    Welcome to the Apple Support Communities
    The iMac hasn't got a HDMI port, so you will have to connect your second monitor to your Thunderbolt port, using a Mini DisplayPort to HDMI adapter in order to be able to connect it to the computer

  • Can I use my macbook pro mid 2012 as an external display using thunderbolt port

    Hi,
    I want to use my macbook pro (mid 2012) screen as an external display for a raspberry pi using a HDMI to Thunderbolt cable, via the thunderbolt port on the macbook pro. Would this be possible? Can the macbook pro's thunder bolt port act as an input and is any additional software required?
    I look forward to hearing from you.
    Thanks in advance!

    Welcome to Apple Support Communities
    You are referring to Target Display mode. Target Display mode can only be used in 27-inch iMacs and iMacs with Thunderbolt, not MacBooks Pro > http://support.apple.com/kb/PH11302
    Unfortunately, you can't use the MacBook Pro as a display. It doesn't support the monitor mode

  • Two External Displays and Internal Display Over Different Connections

    Hi there.
    I'm going to be purchasing a rMBP in the very, very near future. However, I am unclear about how external displays work with this. My current display setup at work is two basic 1080p monitors that can be run over DVI, VGA or HDMI. I'd like to keep using these when I start using the rMBP but also gain the advantage of a third screen by using the internal display at the same time (so much space for activities!).
    One of the thunderbolt ports will need to be used for an Ethernet connection (there is no wireless here), so this leaves the setup needing to be one monitor run via Thunderbolt -> DVI and the other monitor run via HDMI.
    The internet in general isn't being entirely helpful with this. I'm looking for a clear answer of whether the rMBP will run the internal display and the two external displays using this setup under OS X. Some seem to believe that it won't work using different connection types, for example.
    Thanks for any help.

    Hello dljfield,
    Thanks for using Apple Support Communities.
    If you'd like to use multiple external displays with a MacBook Pro with Retina display, then please take a look at the information outlined below. A 15" MacBook Pro mid-2014 can support up to two external displays using different outputs.
    MacBook Pro (Retina, 15-inch, Mid 2014) - Technical Specifications
    OS X Yosemite: Connect multiple displays to your Mac
    Take care,
    Alex H.

  • Two external display with internal diplay on E531

    Hi,
    I have a ThinkPad E531 laptop, and that includes are VGA and HDMI plug. The video card is Intel HD. Can I use 2 external monitor (over VGA and HDMI) with the internal display? (So I want to use 3 displays).
    Thanks!
    Regards,
    Tamás

    Hello dljfield,
    Thanks for using Apple Support Communities.
    If you'd like to use multiple external displays with a MacBook Pro with Retina display, then please take a look at the information outlined below. A 15" MacBook Pro mid-2014 can support up to two external displays using different outputs.
    MacBook Pro (Retina, 15-inch, Mid 2014) - Technical Specifications
    OS X Yosemite: Connect multiple displays to your Mac
    Take care,
    Alex H.

  • Connect 2 external Displays with a iMac 27''

    Hi,
    is there a way to connect two external Displays with a iMac 27inch. Eyefinity? Its a Radeon 5750 inside the iMac isnt it?

    Hi,
    For the first screen is no brainer you use the Apple adapter to have video out to HDMI or DVI, but the second screen is where it gets tricky...
    There are USB to DVI out external video cards that should work with the iMac and OS X 10.6 but I have changed. Honestly I have tested 6 so far and none of them works as advertised, you can not even set minimal resolution on there and some wont even work ( all of them come with OS X 10.6 drivers )
    So I will recommend to stay away from the small $70 or $90 external USB to VGA/DVI cards...
    (maybe someone has luck with them but i have tried like I said 6 so far different brand and no luck..)
    Now recently online I tripped over a nice external video card that takes the MiniVideo Port out from the Mac and then takes it to another 2 monitors price was $249 i think, and you could hook up 2x30" monitors with hight res... I will try to find this link and post here later on.
    Regards,
    Goran

  • 27 inch iMac (April 2011) - Two external displays - how?

    I've just got a new 27" iMac and have connected two external displays via the mini display port. I can only get one to work, what am I doing wrong?

    Sorry that was a dumb typo on my behalf. Here is the setup:
    Apple 27inch iMac only bought today, so it's the newest version with the two Thunderbolt ports.
    Two seperate external monitors each connected to a seperate port via a DVI cable and Mini DisplayPort to DVI adapter.
    So that's:
    iMac x 1.
    Thunderbolt port x 2.
    External Monitor x 2.
    Mini DisplayPort Adapter x 2.
    3 displays in total. But when I turn on both displays only one will show up.

  • Connect two external monitors to mini DP(using a mini DP to VGA adapter) and the VGA out at once

    I am trying to  connect two external monitors to mini DP(using a mini DP to VGA adapter) and the VGA out at once. Windows recognize both monitors as well. But it dowsn't let me use all three monitors at once(see the below image). In the dropdown, it lists all three monitors. Problem is there are two active displays I can select.

    Mavec wrote:
    I would like to add a third monitor.  
    The GPU(s) in your T400 (and most other laptop brands) will support two different displays concurrently.  If you want to support more than two different displays concurrently, you will need another GPU external to the T400.
    Generally, if you want to use two external displays on a T400 you will nee dto use a docking station.
    I have read messages on various fora on this topic and know that there are a number of ways of doing this, but as I have never had a need to do this myself I can't tell you how to go about it.
    Cheers,
    Bill
    I don't work for Lenovo

  • Connect to 2 external displays using 2 thunderbolt to hdmi cables

    I have a new iMac which has 2 thunderbolt ports.  I was told that I can add 2 displays using these ports with thunderbolt to hdmi cables.  However when I do this only one screen connects.  The other remains blank (and off).

    Hello, I wonder if HDMI isn't the problem?
    It's supposed to...
    2nd Display Support:
    Dual/Mirroring*
    2nd Max. Resolution:
    2560x1600 (x2)
    Details:
    *This model can simultaneously support two external displays up to 2560x1600 via Thunderbolt.
    http://www.everymac.com/systems/apple/imac/specs/imac-core-i5-2.9-27-inch-alumin um-late-2012-specs.html
    Do the monitors have anything besides HDMI?

  • Using two external displays that are NOT mirrored

    i have a MBP early 2008, meaning the external display port is a dual DVI-I port. I have have two external displays, both samsung syncmaster xl2370 with native resolution 1920x1080. i have a dual dvi-i to vga splitter. when i connect both displays, they mirror one another, which is not what i want. rather, i want to have my MBP display, and two external displays that are not mirror images of one another. according to apple, if i buy a dual dvi-i to dvi splitter, i get the same effect. i've read on various forums about hardware alternatives, like buying a usb to dvi or usb to vga adapter, with some reasonable results (except a bit of sluggishness). the best one seems to be the diamond: http://www.diamondmm.com/BVU195.php
    it mostly gets good reviews, but is sluggish. does any know of any better options?
    many thanks, jovo

    Welcome to Apple Discussions!
    USB is slow partly because it is processor and driver dependent. Best to go with a straight video solution, such as Matroxes products like this one: http://www.matrox.com/graphics/en/products/gxm/dh2go/

  • Is it possible to connect two external monitors to my T400 laptop?

    Hi,
    I bought a T400 laptop this summer and have it connected through the VGA port to an external monitor, using both the laptop´s monitor as an extended display. I would like to add a third monitor. I am wondering if there is any way to do this or anyone knows further, even if some additional hardware is required. There is no HDMI port on the laptop of course but I´m wondering if some sort of VGA splitter is possible. Any thoughts are appreciated!
    Best wishes.

    Mavec wrote:
    I would like to add a third monitor.  
    The GPU(s) in your T400 (and most other laptop brands) will support two different displays concurrently.  If you want to support more than two different displays concurrently, you will need another GPU external to the T400.
    Generally, if you want to use two external displays on a T400 you will nee dto use a docking station.
    I have read messages on various fora on this topic and know that there are a number of ways of doing this, but as I have never had a need to do this myself I can't tell you how to go about it.
    Cheers,
    Bill
    I don't work for Lenovo

Maybe you are looking for