Tecra A9 - "monitor properties" option is greyed out
Tecra A9 (PTs52A)
In Display settings - advanced - monitor - properties is greyed out.
Think this may have been like it since I added service pack 3 for XP.
Was able to add second monitor and chnage primary & secondary displays before but as properties is greyed out I can't any longer.
Hello
As far as I know when you click there on properties you will be linked on the same properties that you can open for monitor in device manager.
Which monitor type is listed there?
As far as I know there is place to define primary or secondary monitor. You can do this in display settings where the display 1 and 2 are graphically shown.
Last two options can be defined with check mark. Of course it can be done if the external display is connected and recognized.
Similar Messages
-
IMovie: My options are greyed out in content library. Help!
I have iMovie 10.0.6 and I have used iMovie in previous versions. When I go to window > content library all the options are greyed out. How do I fix this?!
anyone?????
-
My colour and colour settings options are 'greyed out' on my Epson printer pane since updating to Yosemite and CS6,this happened before after running a software update on the printer driver! The driver version at that time was 6.62 and now it has updated to version 9.00....could this be the problem??
That's strange ... did you try restarting before printer install? You also may need to delete the printer itself (System Preferences > Printers & Scanners) and add it again , in order to access the proper drivers (?)
Can you show screen shot(s) of your incomplete print dialog? -
I'm trying to get CD onto ipod touch. copied it into ITunes library but when I get to synching 'selected playlists etc' all options are greyed out. If I try and clink sync in bottom right hand corner it gives me warning msg that everything already on ipod will be deleted and I don't want that. any ideas?
Head to Settings -> General -> Restrictions on your iPod Touch and make sure that restrictions for app installations are turned off.
B-rock -
When I select the lab color mode, many options are greyed out?
Can anyone help me . When I select Lab color, many options are grey out. The following are greyed out: exposure,vibrance, black and white, channel mixer, and selective color. It worked perfectly the first time I used it but will not work now. Do I need to reset something. I have tried everything I can think of. I use a PC and PS 5.
Thanks for the help.I'm working on the Mac versions of CC and CC 2014. If I select Lab, those very same options are grayed out.
-
Newbie: In printing dialog, "Scale to" size options are greyed out
I am in the initial stages of figuring out how to use Aperture (v1.5). I am currently trying to make a 5x7 print of a photo.
In the print dialog, "Scale to" 4x6, 5x7, 8x10 size options are greyed out (only "fit image" and "fill entire page" are available).
I've tried searching through the forums, but to no avail...
Thanks!Click the Arrange button on the toolbar and select the desired option.
-
CS6 Encore launches but all options are greyed out
The headline says it all. I'm using CS6 on a MacBook Pro, OS 10.7. Previously Encore has worked well. After the most recent update, Encore will launch but all of the options are greyed out. I can't start a new project, etc. When I try to open a previous Encore project, I receive an error message that some needed software is missing. Any ideas to help me solve the problem? With many thanks.
Christopher BI suspect that same sort of issues that one gets when the activation is messed up. I think the resolution is deactivate and reactivate.
Are you missing any presets in Premiere? I would look at some of the issues in the Premiere forum to further diagnose the problem and look for the recommended fix. -
Nearly all Disk Utility options are greyed out. I just want to wipe dvd-RWs.
I have been searching for a few months for a solution, I finally decided to post my problem.
I have many rewritable disks that I would like to reuse. However, my disk utility is utterly worthless as nearly every option is greyed out. Only the "verify disk" option is available on any of the disks on the left column. All I want is to be able to erase my disks (or not even erase, just burn over them!), yet my disk utility does next to nothing.
I currently run 10.8.3 Mountain Lion, yet I had this problem at least since lion, and possibly snow leopard.
Thanks all,
Hazzard VCan you post a screen shot of what you're seeing in Disk Utility?
I just tried it with a DVD-RW which shows no files, except that I know there are some on it. -
Share Calendar & Calendar Permission Options are Greyed Out
I was trying to share my calendar with my bosses and colleagues but I couldn't. I found my Outlook Share Calendar & Calendar Permission Options are greyed out.
I am using Microsoft Office Outlook 2013 IMAP account.
Please help me on this matter.
Regards;
TaufiqHi Taufiq,
From your description, I recommend you follow the steps below to use Outlook safe mode to determine whether the issue is related to add-ins.
Run -> Type Outlook.exe /safe -> Click OK
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
Hi,
I just added a bigger harddrive and reinstalled Lightroom 5.4.
Now, 2 of 3 edit options are greyed out.
No access to plug-ins or external editors for original files.(NEF's)
I tried reset warnings already.Yes, Nikon transfer was used. From a D800, But that was a year ago.
It has been working fine.
Before I upgraded to 5.4 I had this problem.
When I upgraded to a larger harddrive and re-installed 5.4 the access was limited to only "Copy with Lightroom adjustments."
Last night it started working, I had full access!
But, today it won't work on the same image/plug-ins.
the NIK Collection for example.
This effecting ALL RAW files! D100, D90, D3100, D7000, D800.
My Laptop is doing it now, too!!!
I installed DNG Converter 8.4 with No Difference. NO RAW EDITS.
I can't send a NEF to DXO Optics Pro 9, or anything else! -
ATA190: Web GUI page options are greyed out
ATA190: Web GUI page options are greyed out and device failed registration to CM 10.5
do anyone have a resolution o this issue?Options Greyed out issue can be due to the below Bug, which is listed as just cosmetic:
ATA190: Web GUI page options are greyed out
CSCur53864
Description
Symptom:
ATA190: Web GUI page options are greyed out.
Most of the options in the Web GUI of the ATA 190 are greyed out and cannot be configured. There is no option in CUCM configuration page or the ATA190 Web GUI to unlock the configuration options.
Here is a list of a few of the pages that are greyed out and do not allow any editing:
Network Setup > Basic Setup > Internet Settings
Network Setup > Basic Setup > Time Settings
Network Setup > Advanced Settings > VLAN
Network Setup > Advanced Settings > CDP & LLDP
Administration> Log > Log Module
Administration> Log > Log Setting
Administration> Log > Log Viewer
Conditions:
ATA 190 Devices running firmware version running 1.1.0 (006)
Workaround:
These options are not configurable and are supposed to be view only. The issue is cosmetic.
Most of the Configurable settings are available under the Voice Menu and Administrative Menu.
-Terry
Please rate all helpful posts -
All "timeline" menu options are greyed out in my copy of
All "timeline" menu options appear greyed out in my version of Dreamweaver 8. I've tried deleting the cache file and the configuration folder, but without success. There was originaslly some reference to a Javascript error message reference timeline(), since when I've ensured my Java was updated. Any ideas please?
For some reason, the Link > Framemaker document option was also greyed out when I created the project. I had been having trouble with the .xpj file not being created by RH11 and reinstalled TCS5/RH11. Then I created the project and was able to find and open the .xpj file. Like I said, I found then that the Link > Framemaker document option was greyed out and could only import the FM book.
I recreated another project and see that the Link > Framemaker document option is greyed out. I can only use Link > Word document, which is of no use to me. Any suggestions would be welcome! -
Unable to share--options are greyed-out.
I have created a project, but when I chose "Share," all of the options are greyed out.
I have the project active in the timeline, but it still isn't allowing any "Share" option.
Other projects in the browser allow me to share with all of the choices seemingly available.
It seems like it should be a simple remedy, but once again, I am outwitted by technology.
Any suggestions will be appreciated.
Thanks in advance,
GaryYes, Tom, Thanks.
There was something "hinky" when the camcorder was uploading the files, (like a "flickering" with the connection), but the files seemingly appeared in the project.
I noticed that there is a little yellow triangle with an exclamation point next to the "clap-board" icon next to the project's name, but I'm unable to identify what the problem is.
I highlighted the entire timeline, and hit "Render All," but it didn't change anything.
I may just start over again fresh, but if you have any other suggestions, let me know.
Thank you,
Gary -
All iWeb options are greyed-out, and can't make a new sites or pages.
Hello,
I am having a very annoying problem with iWeb. Every option is greyed-out! I can't make a new page or site, and it quits as soon as I close the iWeb window. It is version 1.1.2 I have tried installing useless updates for iWeb that did nothing, and I've tried to open iWeb from iPhoto by clicking the iWeb button, which also did nothing. I'm just about to give up on it.
Can anybody please point me in the right direction or have a fix for this? All help will be appreciated!Hi ineedagoodalias,
The answer to your problem isn't necessarily the simplest, but I'm 99% sure that it will work for you.
You need to delete and reinstall iWeb. Not hard to do; you just need your installation DVD's that came with your machine.
Drag the iWeb.app from your Applications folder to the trash. Spotlight for other elements of iWeb, and trash those as well. Empty the trash and restart your machine.
On your recovery disks, as you move through the prompts, look for "Install bundled software". Customize the install to include only iWeb. After reinstalling iWeb you will be back to 1.0.1.
Update the app to 1.1.1 directly from this link:
http://www.apple.com/support/downloads/iweb111.html
This will get you going, and you can update to 1.1.2 when you are sure everything is working properly. For other FAQ on iWeb, please see this link:
http://web.mac.com/varkgirl/iWeb/iWebFAQ
Be sure to let us know how it goes.
Mark -
All Update options are greyed out in RH11
Hi. I just reinstalled TCS5/RH11 to get rid of a missing .xpj file issue. Then I imported an FM book and created a glossary in RH11. I then edited my FM book and came back to my RH11 and tried to update the project with the changes in my FM book. All options of Update are greyed out so basically, I cannot update my RH11 project. Can someone hear me wail?
For some reason, the Link > Framemaker document option was also greyed out when I created the project. I had been having trouble with the .xpj file not being created by RH11 and reinstalled TCS5/RH11. Then I created the project and was able to find and open the .xpj file. Like I said, I found then that the Link > Framemaker document option was greyed out and could only import the FM book.
I recreated another project and see that the Link > Framemaker document option is greyed out. I can only use Link > Word document, which is of no use to me. Any suggestions would be welcome!
Maybe you are looking for
-
Lomboz and OC4J 10.3.1
Hello, I am using Lomboz with OC4J 10.3.1. While trying to add a new module, I get the error that some OC4J libs doesn't exist. This libs are: adminclient.jar oc4j-internal.jar ojdbc14dms.jar soap.jar has anyone an idea where I can find these jar fil
-
My Imac has the dreaded blue screen on start up. To avoid this, I unplug the machine each night which solves the problem. I have contacted an Apple service rep who says I need to replace the hard drive. Nothing I have read indicates this. I have not
-
Data Logging a programmatically created shared variable of cluster or array datatype into citadel DB
Hi, Is there a way to log a programmatically created shared variable of cluster or array datatype into citadel DB? I have attempted to programmatically create a shared variable of type 'double' and was able to successfully log the same into Citadel D
-
How many times with wrong password will phone lock out
how many times with wrong password will phone lock out
-
Home Sharing between laptop and PC - Music in Libraries not showing up
Hi, I'm trying to transfer my library from my laptop to my new PC through homesharing. I have turned on homesharing on both computers. On my laptop, I can see my PC's library, but on my new PC, I cannot see my laptop's library. On my laptop, I can dr