Tecra A9 - Recovery Disc Creator malfunctioning

I've been trying to make recovery discs for my Tecra A9.
I've successfully made the two System Recovery Discs (DVD-R), but when I try to make the Applications Disc I get a errormessage right after the program wants me to verify that i've put a blank disc into my DVD-writer.
_Errormessage:_
An unexpected error accured.
Please quit this application and restart it.
(Error Code: 0E01C7-15-00000000)

Hi
Maybe you should try different medias
Such error messages appear mostly if an inserted disk was not fully compatible
I assume you have used the same disks previously in order to create the recovery disk well, I know this is strange but I think you should try another disk.
Cheers

Similar Messages

  • Satellite U400 Impossible to create recovery DVD with Recovery disc creator

    Hi,
    I have a Satellite U400 (few years old), and I never created the recovery DVD.
    Now I want to do it, but for some reasons, when I launch Toshiba recovery disc creator, nothing happens...
    The partition with the recovery files is there, as well as the folder HDDRecovery. I did add some files to this partition, could this be the problem ?
    Thanks for your help.

    It is big problem now if the Toshiba tool cannot find the files.
    How it works you can read on http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=140985
    Check it out please.
    What you can try now is to check if HDD recovery installation will start - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm but Im afraid the same problem will occurs again.
    To be honest you should install Win7 32bit on this small Satellite notebook. It works perfectly. Forget original Vista OS, Win7 works better.

  • Recovery Disc Creator does not list any discs for creation

    Brand new NB200-10G (this a UK model). When I run TOSHIBA Recovery Disc Creator it does not show any discs for creation and the CREATE option is greyed out so I cannot create the discs. Now... when I first got it I did not have a USB DVD writer with me but I ran RDC out of curiosity to see the devices it might offer. At that time it DID list discs to be created but I cancelled out. I get the impression the program thinks it has created the discs and I believe I read somewhere that it will not create the discs more than once. I think it must have set a switch in the registry or .ini files somewhere to indicate that the discs have been created. If so does anyone know how to "undo" this? Drive D (data) and hidden partition *appear* to be intact.
    If this is not possible then I guess I could try the "press key 0 at power up" method to restore to original install setting and this might then enable me to create the discs but I'm concerned that if the restore fails in a destructive way that I might be left without a working PC. TIA Ken
    Solved!
    Go to Solution.

    OK all fixed!
    Restore using key 0 at power up worked fine and cured the ToRDC problem. It then let me produce 2 copies of the restore DVD. Don't know what caused the problem... issue CLOSED.
    Ken  

  • Satellite L500D PSLK0A Toshiba Recovery Disc Creator does not run correctly

    Hi,
    I am trying to create a recovery disc for my Toshiba Satellite L500D PSLK0A-00U009.
    When I run the Recovery Disc Creator it begins to open then it comes up with a box with an exclamation mark then it says 'Can not open target partition'. Then the Recovery Disc Creator will open. It then appears normal then when I insert a CD to being the process it looks as though it is going to work then it says Error and stops and ejects the CD the Error is code is: 0E01B5-26-510444D9
    I have already uninstalled then program then reinstalled it using a download from the MyToshiba website and this did not fix the problem.
    Any suggestions?

    Hi
    Did you try different disks from different manufactures?
    How about the usage of USB flash memory stick? As far as I know you can create an bootable USB Recovery flash stick too.

  • Cannot start Toshiba Recovery Disc Creator on my Satellite A300-15K

    Hi! I'm from Poland so my English is a little poor.. (but I hope that is sufficient)
    My problem:
    I haven't Recovery disc (DVD) because I don't use earlier Toshiba Recobery Disc Creator (when all in my laptop was good).
    Now I haven't do this disc because when I start Toshiba Recovery disc Creator I have a error:
    " Program Launch RDC and create INI files for RDC Recovery partition _przesta? dzia?a? (ceased to operate)_
    error details:
    Nazwa zdarzenia problemu: APPCRASH
    Nazwa aplikacji: TRORDCLauncher.exe
    Wersja aplikacji: 1.0.0.1
    Sygnatura czasowa aplikacji: 4682674e
    Nazwa modu?u z b??dem: WIMGAPI.DLL
    Wersja modu?u z b??dem: 6.0.6001.18000
    Sygnatura czasowa modu?u z b??dem: 4791a7a6
    Kod wyj?tku: c0000135
    Przesuni?cie wyj?tku: 00009cac
    Wersja systemu operacyjnego: 6.0.6001.2.1.0.768.3
    Identyfikator ustawie? regionalnych: 1045
    Dodatkowe informacje 1: 9d13
    Dodatkowe informacje 2: 1abee00edb3fc1158f9ad6f44f0f6be8
    Dodatkowe informacje 3: 9d13
    Dodatkowe informacje 4: 1abee00edb3fc1158f9ad6f44f0f6be8
    Przeczytaj nasze zasady zachowania poufno?ci informacji:
    http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0415

    Hi
    Did you change anything on your notebook?
    I mean if your HDD recovery partition has been changed or the data o thin partition has been deleted?
    To be honest for me it looks like the OS issue. I think its not a single tool issue but I think the operating system has been muddled up
    Maybe you should try to recover the notebook using the Toshiba HDD recovery option and after the new OS installation on the notebook you could try to create the recovery disk again.
    In order to start the recovery you have to press the F8 immediately after the notebook has been powered up. Then you should choose the first option called Repair My Computer.
    This would lead to a new window and there you could choose Toshiba HDD recovery.
    But note; this recovery would format the whole HDD so maybe you should backup some data before you would start this procedure.

  • Re: Recovery disc creator cannot be launched

    Hi,
    I'm having problem with my recovery disc creator, an error occured "No HDD recovery area!\nThe recovery disc can not be launched." when i'm trying to create a back-up disc.
    Need help. What do i need to do?
    Many thanks.
    kenji
    Solved!
    Go to Solution.

    if you have formatted the disc then you have completely removed the hdd partitions. im sure you have figured this out but im going to say it anyway. this is the exact reason your toshiba user's guide tells you to make recovery media first before anything else is done on the laptop. with that out of the way you can order recovery media from toshiba for $25 by calling 1(800)457-7777 or ordering online here csd.toshiba.com/cgi-bin/tais/support/jsp/serviceUnitVerification.jsp?orderType=SFF
    -civicman4-
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

  • DVD recovery disc creator error

    Hiya,
    I have a toshiba L300 series laptop running vista, which basically just crashes as soon as I load it up as soon as I try to do anything in normal mode (it runs perfectly in safe mode). I'd like to reboot my system obviously!
    Basically when I try to run the recovery disc creator, just over half way through creating the first disc I get the error message:
    'Failed to read the following file.
    F:\06491XSP.swm
    (error code:020150-20-00000000)'
    Any help would be much appreciated,
    thanks,
    Olie

    Hi!
    Firmware updates you can get on the Toshiba website but for your Satellite A300 with Mat****a drive I didnt find one.
    Have you tried DVDs from different manufactures? I use always Verbatim disks and never had problems with it.
    Check this!
    Bye

  • Toshiba NB200-10z - recovery disc creator.lnk isn't available

    Hello, I have a problem with my netbook Toshiba NB200-10z, when I run Toshiba recovery disc creator I get the window with:
    The unit or network connection to which the link refers "recovery disc creator.lnk isn't available.
    Make sure that the disk is properly inserted or the network resource is available and try again
    How can I fix it?

    Since this is an English language forum you should post the message in English language.
    I assume you are not able to start the Recovery disk creator software
    Why?? Who knows.
    Try to recover the notebook using HDD recovery option:
    Press F8, choose Repair my Computer, and HDD recovery.
    If this would not be available or possiblewell you will need to try to order a recovery disk from Toshiba or would try to install the system using another disk

  • Satellite A300D-126 Recovery Disc Creator

    Hello,
    can anyone tell me from where i can download the recovery disc creator for my toshiba. I have format the laptop and i am running windows xp sp2.
    Thank you

    I think you have erased the recovery image by formating the laptop. Right?!
    But you can order a backup media here

  • Satellite A300: Does TRDC Reminder & Toshiba Recovery Disc Creator work after Win 7 upgrade?

    Hello,
    I am sorry for bad English.
    Satellite A300.
    Conducted updating to Win7 on the program Toshiba Upgrade.
    Does this program work;
    TRDC Reminder and Toshiba Recovery Disc Creator after updating to Wins7?
    The program TRDCReminder did not find "Renewal of computer".
    On the program Toshiba Recovery Disc Creator was created and that incomprehensible?
    If is not it these programm how to recover computer in the case of failure?
    Does Tempro work in Win7?
    Many thanks.
    With kind regards.
    Igor.

    Good evening.As*** - Enormous thank you for an answer.Before updating to W - s7, I created disks reanimator with Vista.Is there a question in that, how to create the disks of reanimator on W - s7? in default of the corresponding programs?I understood that in the case of accident:1.Restore to Vista 2.Repeatedly to set W - S7 ?Really are not there other paths?On Vista the system was reinstalled from a hard disk.There was possibility to create the disk of renewal.W - S 7 AS ? Tempro after a refixturing ?????:To run out term of guarantee, did 6 months pass ? Enormous Thank you for patience. With kind regards. Igor

  • Tecra A2 recovery discs no work.....file missing or corrupt error message

    Have done the recovery discs but HELP!!! Windows could no start because the following file is missing or corrupt: \WINDOWS\system32\config\system   No option to repair???    have done a memtest and it passed
    Its a tecra A2 model number: PTA20E

    The message means that the System hive (an important component of the registry) is corrupt. Rerun the recovery.
    This applies to all versions of Windows.
       Registry troubleshooting steps for advanced users
    -Jerry

  • NB200-10Z: Can't make recovery disk using TOSHIBA Recovery Disc Creator

    Hi Folks,
    I finally got round to buying a USB DVD drive in order to create recovery discs for my NB200-10Z. I got the following:
    * Samsung SE-S084C, External USB 2.0 Slimline 8X DVD Writer, Black
    I have twice tried to create a recovery disc and am now left with two trashed DVDs. The error codes in the error window are:
    Error Code: 0E01B5-26-2A040803
    Error code: 02016F-3C-00000000
    The first time the burning was stopped, the second time the verify failed.
    Can anyone shed light on this?

    *Short version:*
    Thank you to everybody who replied.
    I decided to try out the USB DVD drive on another laptop to perform a HDD backup operation...and it failed as well. Grrrr. Same DVD media (I just hadn't got round to getting new media to try).
    I think I shall discount the possiblility of the NB200 being at fault, and therefore shall consider this question answered on this forum.
    *Long version:*
    Well, I ended up using Virtual CD to "burn" an ISO file to HDD, and then copied that to another laptop to burn to DVD (not using the USB DVD drive, but the same DVD media type). Being the curious type I decided to perform a restore using the USB DVD drive. It got part way through installation then informs me that a CRC check had failed...argggg.
    So, to cut a long story even shorter, I ended up slipstreaming the Intel storage drivers into a Win XP ISO (created from a Win XP CD I had from another previous laptop) and creating a bootable USB drive. Now I have a clean install with all the NB200 driver installed. Phew.
    Actually, to think a bit more about it, I could have attempted to put the Toshiba recovery ISO onto the bootable USB drive, but I've done the clean install now anyway.
    For whatever reason, I had such trouble getting the NB200 BIOS to recognise the USB DVD drive in order to change the boot order (it wasn't in the option list). This was with the DVD in the tray, and without the DVD in the tray. Some investigation required on my part, I think, to determine exactly what is going on.

  • HP Recovery Disc Creator Probook 4740s

    My company bought a new laptop for me which I have received and configured today
    HP Probook 4740s - Windows 7 Professional
    I am trying to create a set of recovery discs but it fails with the following error, can some one help me with this issue please.
    I have tried running the recovery as the administrator but it made no difference

    Hi:
    I can't help you with that specific issue, but I would just call HP at this number 1-800-334-5144, and order a set of recovery disks for your notebook.
    You will need to provide the model # and serial number.
    Since the notebook is presumably under warranty as it is new, HP normally ships the recovery disks at no charge.
    When a PC is out of warranty one pays $10 for a set.
    Paul

  • Re: Tecra T9100 Recovery Discs

    sir,
    Im najeeb from cochin.My laptop driver cd has missing.my laptop model number was THOSHIBA T9100.Please help me.
    THOSHIBA T9100
    MODELNO:PT910E-5XQ1N-G3
    SERIAL NO.53884386G
    THOSHIBA EUROPE GMBH

    *@najeebkar*
    You can order it from the ASP in your country
    In very rare cases you would be not able to order it from ASP in the Recovery CD does not contain the Win XP SP1!!!
    Regarding the posting from kody:
    Unfortunately, you cannot order the Recovery CD using the internet address posting by kody because its working only with newer notebook series

  • Error while creating recovery discs on HP Pavilion p7-1147b Win7

    While creating the 2nd of 3 ea. system recovery discs, I get an error message during the "verifying disc" phase that terminates the process.  I'm using high quality DVD+R 4.7gb discs and have tried several brands.  I had same problem on the 1st disc, but it finally finished after 3 tries - now I can't get the 2nd disc completed to get to the final one.  The DVD burner seems to work fine for other applications. I really don't want to purchase these recovery discs from HP.
    This question was solved.
    View Solution.

    Hi,
    Try creating the rest of the Recovery Discs in Safe Mode as follows.
    Shut down the PC.  Tap away at f8 as you start the PC to enter Windows Recovery Console.  Use the arrow keys to select Safe Mode and hit enter.  When windows has fully loaded in this mode, launch the recovery disc creator application and see if you can complete the creation of your discs in this way.
    To exit Safe Mode, just restart the PC and Windows will boot normally.
    If this still fails to create a viable set of Recovery Discs and you are within your warranty period, call HP ( the telephone numbers can be found on the relevant link below ) and explain that the Recovery Media Creator application fails to create a viable set of recovery discs and request that they send you a free replacement set.
    If you live in the US, contact HP Here.
    If you are in another part of the world, start Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for

  • What is the use of CALL FUNCTION MODULE - AT BACKGROUND TASK?

    Hi experts, I found Call functional module in background task will make the FM run at the next commit work as some people said. So I have some questions: 1 if we use COMMIT WORK commend, the pending FM will be called? If there are several FMs called

  • Outlook Web Access not working in Safari or any other browse

    When I try to access OWA from ANY browser, Safari, IE, or Firefox, I get the same error. "You could not be logged on to Outlook Web Access. Make sure your User Name and Password are correct, and then try again." When I log in from my PC, I don't have

  • Shuffle's Button/Slider becoming Flimsy/Loose!

    Ok i have noticed my iPod Shuffle's button/slider on the back, become a little flimsy/loose. I usually always go from OFF to Shuffle. Of course not in one move, but a gentle way. Anyways so now when i place my thumb on it and gentle nudge it, it move

  • Why use the symbol "|" here?

    Why use the symbol "|" here? SQL> @D:/temp/emp_package.sql|

  • Bringing back an old password validation rule

    Good afternoon On our old 4.6C system, there was a password validation rule that stated the first three characters of the password cannot occur in the same order in the user ID. This rule was removed when we upgraded to ECC 6.0 While the users hated