Tecra M2 - Card reader doesn't work on Windows 7

Hi All
I've installed Win 7 on my TECRA M2 and everything worked fine at once ... except for one thing! The SD card reader is not recognized (worked well with XP).
Any hint please ?
Thanks in advance
JP

Tecra M2 is very old notebook model and it won't be Win7 supported.
In my opinion you should be happy that Win7 works well on this old notebook model. I cannot imagine card reader is so important and you cannot live without it.
Card reader is specific hardware component and, as you probably know, limited with reading SD cards with different capacities.
Maybe it sounds pessimistic now but I don't believe you will be able to find some "independent" driver for it.

Similar Messages

Inspiron 1520: memory card reader doesn't work in Windows 8

I upgraded my daughters Inspiron 1520 to Windows 8 and everything works well. The only problem we are having is the memory card reader does not work. Windows 8 recognizes it and shows the action center flag and advises us to install a new driver.. We install the driver R188776.exe, install it, and re-boot, but the memory card reader still doesn't work.. Is there another driver we can install?

Did you ever get this problem figured out? I had two hardware devices indicating problems when installing windows 8 on my 1520. Never actually used my card reader until I had everything up and running. I downloaded "Ricoh R5C832, R5C843, R5C833, v.1.0.1, A00 Ricoh R5C832, R5C843, R5C833, v.1.0.1, A00
R141246.EXE | Hard-Drive (582 KB)
Chipset|
Release date 26 Jun 2007
|Last Updated 03 Nov 2011"
It asked if I wanted to use it since I already had a newer driver in installed and I did it anyways. No more flags in device manager. Hope it helps.

SD Card Reader Doesn't Work After Windows 10 Upgrade

I recently upgraded my laptop to Windows 10 and since then am unable to download pictures to my laptop (something I need and do all the time). My computer doesn't even recognize that I've put an SD card into it - no noise, no pop-ups, nothing. I also tried to plug my camera directly into the computer and go that route, but it won't work that way either. The SD card in the camera definitely has pictures on it, but it says the "folder is empty." This is a function that I love, need, and greatly miss. I did check to see if there were any software or driver updates available for my laptop on your support site, but Windows 10 isn't even an option in the operating system version drop-down... Please help!

Hi: I think most of the g6's have the Realtek card reader. Try the W10 card reader driver directly from Realtek. First driver on the list... http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownTypeID=3&GetDown=false

Cac card reader doesn't work on my mac now

I upgraded to mountain os x lion and now my cac card reader doesn't work when I login in to ako. when I use the cac card login it doesn't read my id or the reader. what can I do to fix it because i've been googling and I haven't found a solution.

Try militarycac.com
There are both free and low priced commercial solutions for this and the Chief covers all options at his website.
-- Bill

Digital card reader no longer works for Windows 7 Pc, 3yrs old

Help, my digital card reader no longer works for Windows, 32bytes, on my 3 year old pc. HP does not have any any down loads for this. Any suggestions where else I can find them that would not interferre with other functions of my pc

Hi,
What is your machine ? The following devices may help:
http://www.ebay.com.au/bhp/usb-card-reader
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Adobe Reader doesn't work after windows 7 update

Hello,
My Adobe Reader X was working fine, until one night where Windows 7 automatically updated, and after that Adobe Reader doesn't work anymore. It doesn't respond AT ALL when I click on it, and I cannot view PDF files anymore.
I uninstalled it, and re-installed it --- still doesn't work. I tried downloading version 9, but still it doesn't work.
I also tried to do system restore, but somehow it won't let me --- it says it failed to do so.
When I try to open PDF files in IE 10, it says "There is a problem with Adobe Acrobat/Reader..." and an error code of 103:103.
Could anyone help me?
Thanks!

You can try running cleaner on your machine
http://labs.adobe.com/downloads/acrobatcleaner.html
and then again install latest Reader from
http://get.adobe.com/reader/enterprise/

Macbook Pro SD Card reader doesn't work

Hey all. A few weeks ago I plugged in my SD card like I've always done, but my SD reader didn't work. I've tried SMC reset and PRAM reset. Nothing works. The SD reader doesn't show up in apple system profiler nor in Disc Utility. I've tried different SD cards.
What can be done?

i tried that since Yosemite killed my SD Card reader... its so annoying. i don't even know if its a hardware or software issue. however, the check didn't worked... and all my 3 SD Cards are working well...

SD card reader doesn't work on Satellite C850-1CN after Win 8.1 install

Hi,
Since I installed Windows 8.1 on my computer Satellite C850-1CN ref. : PSKCAE my SD port does not work
I would like to know if there is a driver I need to download because I searched the site for a pilot port but in vain ...
Sorry for my English I speak French and I hope I'm in the right forum

Hi
You have to download and install the card reader controller driver for Win 8.1 system
This driver should be the right one:
[Card Reader Controller v 6.1.8400.30136 Windows 8.1 - 64 Bit|http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=312&selProduct=7499&selSh ortMod=3417&language=13&selOS=all&selType=316&year upload=&monthupload=&dayupload=&useDate=null&mode= allMachines&search=&action=search&macId=&country=a ll&selectedLanguage=13&type=316&page=1&ID=88526&OS ID=46&driverLanguage=42]

Re: Satellite A300-1EG - Card reader doesn't work

Hi. Here is my problem:
My OS is WinXPSP2, all necessary drivers was installed including for Card reader controller. But when I insert SD card into my laptop, nothing changes. In Device manager "Secure Digital Storage Device" marked with "!".
What is the reason of such problem? If somebody knows, help me please.
Thank you for attention.
P.S. I am sorry if something is wrong in my English.

Can you try to install the notebook with the recovery disk? This would be important because so can be sure that all functions will work.
If doesnt work it seems like a faulty hardware or lets say a faulty card reader but try the recovery disk first.

Tecra A10 - BIOS updater doesn't work on Windows 7

Upgrading BIOS for TECRA A10/M10 and Satellite Pro S300/S300M to version v1.90 using P0065v190.exe (bios-20090304141534) fails with message:
"[Error] BIOS Update is not supported OS. Unsupported OS or service pack is installed."
Note: Executing as an Administrator returns the same error.
Probably Windows 7 is not supported but, it must be an explicit protection since the Vista version should work in 7. There's any updater parameter to skip this protection?

BIOS update is designed and tested for certain OS. Win7 is not on the market and at the moment Toshiba offers tested BIOS updated for Vista only.
Sorry but what else to say. You probably know how sensible BIOS update is and how dangerous it can be. So don't play with this and don't make not-tested experiments with this stuff.
In few months Win7 will be on the market and Toshiba will start official support. You can wait few more weeks isnt it?

Tecra 9000: SD card reader will not work with XP

I have made some progress with this subject, it seems that Cardbus devices cannot share IRQs, although the main issue is that the memory address FFDFB200-FFDFB3FF is shared by both the SD card controller and the SD Card Memory Device. Unless a way to modify the registry can be found to resolve this memory conflict, the simple answer is that the SD card reader won't work under XP.
I think this would take some major surgery of the registry or re-writing of the drivers to move the memory address used by the SD card device, I am still working on this for now.
Can someone from Toshiba Support or Toshiba Marketing please explain to me why my Tecra T9100 has a sticker with "Designed for Windows XP and Windows 2000" on it, when Toshiba don't fully support XP on the 9000 series?
David
[Edited by: admin]

Hi David
Unfortunately, I dont think that you will find here someone from Toshiba marketing or other departments. This is ONLY a user to user forum.
What you say is simply NOT true.
The Tecra 9000 was delivered with 3 different OS.
It was delivered with Windows XP Pro, W2k and Win98. You can order all this Toshiba images from the Toshiba service partner. Therefore Tecra 9000 does support Windows XP!
Tecra 9100 was delivered with Windows XP and Windows 2000 and supports also Windows XP!
Of course there are different models with different hardware configuration but all supports WinXP.
I dont know why you get this error message or why you cannot use the SD card but I assume you dont use the Toshiba image. Therefore you have installed your OS not correctly. Because youre a newbie you dont know that the whole Toshiba driver installation must be done in the right order and all the Microsoft QFEs must be also installed.
As you see you have to pay attention to many important things if you want to install the OS manually.
Have a nice day

[SOLVED]Laptop Internal SD card reader no longer working

Two weeks ago I purchased a Raspberry Pi and set up my own SD card with Arch Linux ARM using the directions at http://archlinuxarm.org/platforms/armv6/raspberry-pi with the internal SD card reader on my laptop and had no issues. Today I decided to load up a XBMC distro to a new SD card, but my internal card reader doesn't seem to autodetect or mount my new card. I tried inserting my other card with Arch ARM that I know is a good card, but it no longer works with that card either. Here are all my logs that I could think of to post for any advice:
uname -r
3.9.8-1-ARCH
lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 02)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
01:00.0 VGA compatible controller: NVIDIA Corporation G73M [GeForce Go 7600] (rev a1)
02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 01)
06:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
06:04.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10)
06:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01)
06:04.2 SD Host controller: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01)
06:04.4 FLASH memory: ENE Technology Inc SD/MMC Card Reader Controller (rev 01)
lsusb
Bus 001 Device 002: ID 0c45:624f Microdia PC Camera (SN9C201 + OV9650)
Bus 004 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 74.5G 0 disk
|-sda1 8:1 0 9.3G 0 part /
|-sda2 8:2 0 63.3G 0 part /home
`-sda3 8:3 0 1.9G 0 part [SWAP]
sr0 11:0 1 1024M 0 rom
fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes, 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000f2f32
Device Boot Start End Blocks Id System
/dev/sda1 * 63 19535039 9767488+ 83 Linux
/dev/sda2 19535040 152296199 66380580 83 Linux
/dev/sda3 152296200 156301487 2002644 83 Linux
dmesg | tail
[17198.557922] mmc0: new SDHC card at address aaaa
[17535.391900] mmc0: card aaaa removed
[17537.984043] mmc1: new SDHC card at address aaaa
[18198.208331] usb 4-1: new full-speed USB device number 3 using uhci_hcd
[18199.855227] mmc1: card aaaa removed
[18221.345032] usb 4-1: USB disconnect, device number 3
[18473.771242] mmc1: new SDHC card at address aaaa
[20787.874847] mmc1: card aaaa removed
[21102.784624] mmc1: new high speed SDHC card at address e624
[21119.691467] mmc1: card e624 removed
It seems I have all the necessary information, but I am not sure where to go from here. It's obvious my laptop is detecting the card being inserted and removed, but the card reader is never listed in /dev so I can't mount it. It's listed under lspci but not under lsusb. I'm assuming that it was two weeks ago and that's why it worked, but I'm not sure how to get lsusb to detect it so it will work again. Thanks for any help you guys have.
Last edited by coolcashews (2013-07-06 00:32:55)

Thanks for your quick reply. Here are the logs you asked for:
lsmod | grep mm
mmc_core 94486 2 sdhci,sdhci_pci
usb_common 954 1 usbcore
pacman -Qi linux
Name : linux
Version : 3.9.9-1
Description : The linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.9.9
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : None
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 65511.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Wed Jul 3 16:00:01 2013
Install Date : Fri Jul 5 11:31:57 2013
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature

T510 Windows XP 64bit - Multi Card reader no longer working

Just installed XP 64 bit from XP 32 because i finally got tired of windows only recognizing 2GB of RAM.
I have just discovered the multi card reader no longer works (it worked just a few days ago with the 32 bit xp).
i have tried uninstalling and reinstalling the driver (6hss03ww.exe - Ricoh Multi Card Reader Driver) several times, with no luck.
i do not have any uninstalled drivers, or highlighted items in the device manager.
Has anyone else ever has this issue, or can offer some advice? i am a bit at a loss... and ready to dump this thing out the window and buy a mac...

Hello mate,
Lenovo doesn't support windows xp 64-bit. If you have a look in the readme file it says
Added support for Microsoft Windows XP Professional x64 Edition (on ThinkPad
W510 only).
Install windows vista or 7 if you want a 64-bit OS.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

MacBook Pro SD card reader is not working

I have a MacBook Pro 13" Early 2011 with OS X 10.8.2. The reader has been working until now. I have tried several different cards with no luck. After searching the community board I tried both an SMC reset and a PRAM reset but no luck. (When I look in Disk Utility, I do not see the built in card reader.) Any suggestions?

Anyone else with card reader issues should read this page. Just because your card reader doesn't appear to be working or has mysteriously dropped off your system doesn't necessarily mean a logic board replacement. I've repaired several portables over the years that had been quoted for costly logic board replacements, when in fact the failures were relatively easy to resolve once you understood the real problem.
It's common belief a PRAM or SMC reset should fix all hardware glitches but sometimes it just doesn't go deep enough, as I found out with my 2011 MBP. Simply removing the battery was all it took to resurrect my seemingly dead card reader, when PRAM and SMC resets failed to have any impact on the problem.

I have an iPhone 4, an I moved to London an I bay a sim card both Doesn't work

I have an iPhone 4, an I moved to London an I bay a sim card both Doesn't work, the technic seas to me that the phones was block. how I can unblocked or you can do it

The carrier who locked the iPhone are the only source of an unlock
Your Carrier in your home country ??

Tecra M2 - Card reader doesn't work on Windows 7

Similar Messages

Maybe you are looking for