Tecra M2: How to install Windows XP through a LAN??

Hi,
I have a Tecra M2 laptop
and my CD-rom drive is damaged
and I don't have a usb floppy-disk drive
I've tried to install Windows XP MC by using a usb cd-rom drive
but it fails to boot from the usb cd-rom.
I've heared that there is a way to do that through a LAN
How can I do that??
P.S.: I have a Desktop PC (for the LAN)
Thanks...

The LAN booting is not very easy for a common user with no additional experience.
The notebook supports an PXE option for booting from the LAN (DHCP server)
Well, the best way is to googel a little bit for PXE and booting from LAN.
You should find many websites with descriptions and how to do it.
For example like this:
http://www.sharewareconnection.com/network-boot-tools.htm

Similar Messages

How to install windows 7 through a bootable usb?

I had tried to install windows 7 on my imac running os lion through a bootable usb as it's superdrive is broken.
Firstly I created the bootable usb of windows 7 from my friend's laptop using the instructions on this website
http://windows.appstorm.net/how-to/windows-7/how-to-create-a-windows-7-installat ion-usb-drive/
but bootcamp would raise an error saying disk could not be found. So I modified the info.plist file from bootcamp package contents and created an iso of the bootable usb drive. Bootcamp then allowed to create a windows install usb through the iso and partitioned the hard disk too but after doing so the computer restarted with a black screen and a message ' insert boot disk and press any key'. Now I've deleted the windows partition and really need help installing windows 7.

You can only install Windows 7 from an USB drive if your Mac didn't come with the SuperDrive.
I know that you can modify the Boot Camp Assistant Info.plist to show the option to create a bootable USB drive, but the problem is that the firmware of your iMac doesn't allow it. Use a Windows 7 DVD

How to install windows 7 on a macbook through usb drive

So My Cd Drive is broken, And The only way to install windows is to either delete my whole hard drive and make it so I boot from the bios of the motherboard, but I don't know what kind of key to press to go into the bios of the motherboard once I delete the whole drive, which won't even let me do due tot he fact that I can't insert any other disks, Thanks to my Cd Drive being broken.
Is there any way I can install windows 7 through a usb Drive? I have a macbook 13 inch unibody 2008 model. identifier is macbook 5,1

If you want to install using Bootcamp Assistant try these links.
http://www.apple.com/support/bootcamp/
https://discussions.apple.com/community/windows_software/boot_camp
Or, you could install using a virtual machine like Parallels, Fusion, or VirtualBox.

How to install Windows 8.1 Pro on Macbook Pro

Hello everyone,
I'm new to these forums and new to bootcamping as well but have been reading all kinds of posts about how to install Windows 8.1 on their Macs using bootcamp. I am however having trouble with this situation as I have no clue what to do next. I have a Macbook Pro 2011, running on Maverics, and I recently downloaded a digital copy of Windows 8.1 Pro, 64-bit, for the Mac platform, along with its CD key through my University's hub website as can be seen here.
After finishing the downloading process, I received this file which is about 4GB large.
When i double click on the file this happens. It opens something on DEVICES which gives me what is on the 2nd image.
At this point, I'm at a loss on what to do next. Do i burn the file on a DVD hoping that Bootcamp will recognize it as a windows disc? Any help would be appreciated, thank you.

You need a 'Full' Installer.
From Boot Camp 5.1: Frequently asked questions - Apple Support
Which versions of Windows work with Boot Camp 5.1?
Boot Camp 5.1 supports 64-bit, non-Enterprise versions of Windows 7, Windows 8.0, and Windows 8.1. This version of Boot Camp doesn't support Windows XP, Windows Vista, or any 32-bit version of Windows. Depending on your Mac, you may be able to use an earlier version of Boot Camp to work with other versions of Windows. For details, see the Boot Camp system requirements for Microsoft Windows.
Can I perform an upgrade install from a 32-bit version of Windows to a 64-bit version of Windows?
It's not possible to upgrade a 32-bit version of Windows to a 64-bit version of Windows. Back up your important files, then perform a new install of the 64-bit version of Windows.

How to install Windows 8 on Macbook pro with retina display ?

Hi - How to install Windows 8 on Macbook pro with retina display ?
I am pretty new to the apple world. Tried doing it through bootcamp but did not success.
I am not interested to install it through Parallels or Fusion. Plz guide.
Thanks !

OK, use Windows 8 in Bootcamp. Be aware that there are no Bootcamp drivers for Windows 8 yet. So you may experiance not only delays but display problems, freezing, crashes and other problems.
Here is the Bootcamp forum. Make sure you read all the posts from people experiencing Windows 8 problems with Bootcamp. https://discussions.apple.com/community/windows_software/boot_camp

How to install windows 7 using usb as the bootcamp doesnot have the option of creating a bootable usb. please help

I have an intel based mac with 10.6.8 mac os x. How to install windows 7 using usb as the bootcamp doesnot have the option of creating a bootable usb. please help

Welcome to Apple Support Communities
You can install Windows from a USB drive in one of these computers:
- MacBook Pro with Retina display.
- Mac mini (Mid 2010 and newer).
- MacBook Air.
- iMac (Late 2012).
If you don't have any of these Macs, you can't install Windows through a USB drive. Instead, buy Windows on a DVD. Follow Apple's steps > http://support.apple.com/MANUALS/1000/MA1519/en_US/Boot_Camp_Install-Setup_10.6. pdf

How to install Windows 8.1 with Windows 8 Product key?

I have purchased Upgrade pack from Windows 7 to Windows 8. I have also Updated the OS to windows 8.1 through Store. How to install Windows 8.1 with Windows 8 Product key?

The download link for the Windows 8.1 installer at the Upgrade with Product Key Only does not accept a Windows 8.0 product key. I ended up using the trick suggested by Andre Ziegler in this thread to obtain the 8.1 download independent of the Windows
Store, but I haven't yet checked if the 8.0 key works from 8.1 Setup.
I do IT for a living but I have plenty of family members that bring their notebook PCs to me and ask me to do the heavy lifting, and I'd rather not re-download the same 3.6 GB every single time someone tells me to fix their PC. I also want to be able to
re-install 8.1 from the source media in case of a catastrophic hard disk failure and I have to replace the disk.
As an aside, tools that retrieve product keys for installed products end up retrieving the 8.0 product key from an 8.1 install that was upgraded via the Store. It kind-of makes sense that an 8.0 key could work to install 8.1 because 8.1 is supposed
to be a free upgrade for licensed 8.0 users, but this doesn't seem to work until after 8.1 is successfully installed via some trickery and the user supplies the 8.0 key to activate it.

How to install Windows 8 or 8.1 on linpus linux with usb? I have Acer aspire E5-551G-t16q.

how to install Windows 8 or 8.1 on linpus linux with usb? I have Acer aspire E5-551G-t16q.

Welcome to Apple Support Communities
Your MacBook Pro is not designed to install Windows through an USB drive, so do not use this option. You are getting a white screen because your MacBook cannot start up from the USB drive with Windows.
Instead, use a DVD with Windows, so you will be able to install Windows. Follow these steps > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
Mid 2009 MacBooks Pro do not support Windows 8 officially

How to install windows 2000 on my g560 ?

How to install windows 2000 on my g560 laptop?
I am able to install winxp and upwards only.is there a way through bios setting or anything and secondly can u use winxp drivers for win2000?
thanks everyone here for your time
u can email me too: *****
Moderator note: member's email address removed to keep away from the spambots.

Windows 2000 has been largely abandoned (and with VERY GOOD reason) why on earth would you want to install that outdated unstable OS? It's plagued with security issues bugs and BSOD issues from being unsupported so long (even when it WAS supported) chances are no drivers were made compatable with that OS for your machine as XP is a totally different monster you likely would not find drivers for 70+% of your hardware. I'd 110% advise against even trying it XP is the oldest supported windows OS anymore an even it is about to lose support very VERY soon (if it hasn't yet already). I can't stress enough how much of a bad idea (and without any advantages by doing so) it would be to even attempt this.
Lenovo 15.6,B575 W7 E-450,ATI6320,320GB,8GB DDR3 Ram-*Midnight*
Dell Latitude D430,12.1 C2D 1.3 ULV,2GB DDR2,80gb SSD,Intel 950,XP *Mini Me*
Dell Latitude D630,14.1,C2D2.0,W7,500GB,8GB DDR2,X3100*Old Faithful*
Nvidia I shall Never forgive you for the 8000m Series.

How to install Windows 7/Vista as 2nd OS and retain predesktop environment (service partition)

This is a step-by-step instruction how to install Windows Vista or Windows 7 as a second OS on a Lenovo Thinkpad that originally shipped with Windows XP AND how to retain the access to the Lenovo Service Partition.
I have been searching the internet for instructions like these but could not find anything useful. So I am posting it
here. Maybe this helps other users.
I have tested the procedure below with installation of Windows Vista Ultimate (64bit) and Windows 7 Ultimate (64bit). I believe that the procedure will also work with the 32bit versions of these OSs. I am not totally convinced that this works when the OS to install is Windows XP (64bit or 32bit). XP has a completely different boot sequence compared to Vista or 7. The basic steps would remain the same, but the XP setup is less forgiving when it finds an unknown partition. If somebody wants to try it out, please post your results as a reply to this forum entry.
Never never never try to install an older OS (like Windows 2000 or NT) as a second OS when XP is already installed! This is doomed to fail.
The procedure below does NOT work for Linux installations. I am not a Linux wizard, but any Linux bootmanager I know about is incompatible with the Lenovo Service Partition.
The procedure was tested on a Thinkpad R61 model 8918-B9G. It should work similar on other models.
You definitely need a service partition with Rescue&Recovery version 4. It will NOT work with older versions of R&R or if the service partition is not a type12 partition (see below how to find out about that).
I assume that the harddisk partitions are unmodified, i.e. still have factory settings. This is likely the case if you
never attempted any OS install or recovery action. If this is not the case, the procedure may or may not work.
You also need a bootable CD with a tool that can change the size of your current system partition. I was using gparted live version 0.5.2-9. ( http://gparted.sourceforge.net/ )
Everything you do is at your own risk. I am in no way related to Lenovo, other than being a customer using their
products.
Step 1) Make a full backup of your harddisk. Get yourself recovery CDs for your Thinkpad model if you don't have any. The changes we are about to make can completely screw up your harddrive. A typo is sufficient for that to happen.
Step 2) Power on the system. Check that you can boot into the Service Partition by pressing the Thinkvantage button when the startup screen appears. (Older systems may have a differently named button.) If there is a problem booting the service partition now, it is likely that the rest of this procedure will not fix it.
Step 3) From the service partition choose 'Warmstart' to reboot the system. Reboot Windows XP, logon.
Open a command prompt. CD to the following directory:
\Program Files\Common Files\Lenovo\BMGR
On a german language system (like mine) it is
\Programme\Gemeinsame Dateien\Lenovo\BMGR
If you have an older IBM system the directory may be named
\Program Files\Common Files\IBM\BMGR
or something like that. Maybe you need to search around.
In the following, I will call this the "BMGR dir".
Enter the following command:
bmgr32 /info /v
You should get an output similar to this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
It's a Lenovo MBR
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? (512) Label is SERVICEV
Using version 2.05 of Lenovo Boot Manager
Reading: \\.\PHYSICALDRIVE0
        MBR Sector 1 Index: 1   Checksum: 00    Disabled
        MBR Sector 2 Index: 4   Checksum: 03    Passed
        MBR Sector 3 Index: 5   Checksum: FD    Passed
        MBR Sector 4 Index: 6   Checksum: 58    Passed
        MBR Sector 5 Index: 7   Checksum: 96    Passed
        MBR Sector 6 Index: 8   Checksum: 7F    Passed
        Data Sector Index: 3   Checksum: F1    Passed
        Original MBR Index: 2   Checksum: BD    Passed
        No Patch Sectors
        Checksum Byte: 00
        Think Flag: 1
        WinPE Partition (0-3): 1        Alt Boot Partition (0-3): 1
        Boot Config: 2 (Service Partition containing two Service OS's)
        Boot State: 0                   Alt Boot Flag: 0
        (Normal booting operation, will boot to Customer OS)
        RRU: 00000000 00000000          Prev Active Part: 255
        Previous Partition Type: FF     Patch IN: 0     OUT: 0
        CIRT Disabled
        TOC: 0000000000000000           Lock: 0
        Show Error: 0                   Halt on Error: 0
        CIRT Load Return: 0
        CIRT Execute Return: 0
        Pause Duration: 10              Scan Code: 0085
        F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
        Check Msg: There has been a signature failure
# active type      start CHS      end CHS      startLBA       size
0   0x80   0x07      1   1   0   239 255 255           63    301296177
1   0x00   0x12      0 193 255   239 255 255    301296240     11279520
2   0x00   0x00      0   0   0     0   0   0            0            0
3   0x00   0x00      0   0   0     0   0   0            0            0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
The important thing to look for is the 0x12 partition type in the partition table at the bottom. This is the service
partition. If you do not have a 0x12 partition, then you can stop here because the rest of the procedure will not work
for you.
Step 4) Shutdown and boot gparted from CD. Shrink the system partition to the desired size. Do NOT touch the service partition! Do NOT attempt to create another partition! Leave the new white space on the disk untouched! Apply changes and restart the system.
Step 5) Reboot XP. gparted has set the NTFS dirty bit. This will cause XP to run a full CHKDSK. Depending on how much files there are on the partition this may take considerable time. Let CHKDSK run to completion. When CHKDSK finishes, the system will automatically reboot.
Step 6) XP reboots now. Logon. When loading the desktop, XP will show a popup window, stating that system settings have been changed and new devices been discovered and that the system should be rebooted. This is ok. XP actually recognized the shrunk system partition and applied the necessary changes to its own system parameters. Click YES to reboot the system.
Step 7) XP reboots. Logon. Open a command prompt, CD to the BMGR dir and enter:
bmgr32 /info /v
The output you get should be similar to the output you have seen in step 3, except that the partition 0 size column
shows a smaller value.
Step 8) Shutdown, restart. Check that you can still access the service partition by pressing the blue Thinkvantage button when the system startup screen appears.
Step 9) From the predesktop environment choose warmstart. Reboot XP. Logon, logoff, shutdown.
DO NOT SKIP THIS STEP!!! If you start the Windows Vista/7 install right after shutting down from the predesktop
environment, the Win Vista/7 setup program will screw up your harddisk! The Lenovo MBR bootmgr reboot takes two steps for completion. The first step is the shutdown and the second step is executed when booting from harddisk. A boot from the Windows CD will skip this second step and disaster finds its way...
Step 10) Insert the Windows Vista/7 DVD and boot it. Start the setup. Choose "Custom (advanced)" install. It will show the partitions on the disk. Select the white space (unallocated). Click on "disk options (advanced)". Click on "New" to create a new partition in the white space. Keep the default size, click "Apply". Click "Format". A popup window appears stating that the partition may hold OEM data. Continue. Click "Next". Installation starts.
Continued in the second post...

Step 11) Win Vista/XP will reboot several times during installation. You will always see the Windows bootmanager with an entry for "Earlier Windows version" and "Windows Vista/7". DO NOT DARE to touch the blue Thinkvantage button on any reboot or press any function keys!
Step 12) When the installation is finished, check that you can successfully reboot Win Vista/7 by selecting it from the Windows bootmanager.
Step 13) Reboot XP by choosing "Earlier Windows version" from the Windows bootmanager. Open a command prompt. CD to the BMGR dir. Enter the following command:
bmgr32 /info /v
The output will now look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
Opened Master Boot Record to see whose MBR it is.
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
# active type      start CHS      end CHS      startLBA       size
0   0x80   0x07      1   1   0   254 255 255           63    109675692
1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
3   0x00   0x00      0   0   0     0   0   0            0            0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
startLBA and size will of course differ, depending on the actual partition sizes you have set. Note that Windows setup moved the service partition to entry 2 of the partition table. If you do not see the 0x12 partition then stop here.
Otherwise the following step will likely screw up you harddisk.
Enter the following command (case sensitive?):
bmgr32 /Fbootmgr.bin /m0 /IBM /v
The output will look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /Fbootmgr.bin /m0 /IBM /v
installing MBR
finding free sectors
Sector 9 is free
Sector 10 is free
Sector 11 is free
Sector 12 is free
Sector 13 is free
Sector 14 is free
Sector 15 is free
Sector 16 is free
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
Setting Think bit
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
This command reinstalled the Lenovo bootmanager in the MBR that was erased by the Win Vista/7 setup program.
Enter the following command:
bmgr32 /info /v
The output will now look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
It's a Lenovo MBR
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
Using version 2.05 of Lenovo Boot Manager
Reading: \\.\PHYSICALDRIVE0
        MBR Sector 1 Index: 1   Checksum: 00    Disabled
        MBR Sector 2 Index: 11 Checksum: 03    Passed
        MBR Sector 3 Index: 12 Checksum: FD    Passed
        MBR Sector 4 Index: 13 Checksum: 58    Passed
        MBR Sector 5 Index: 14 Checksum: 96    Passed
        MBR Sector 6 Index: 15 Checksum: 7F    Passed
        Data Sector Index: 10 Checksum: 01    Passed
        Original MBR Index: 9   Checksum: 12    Passed
        No Patch Sectors
        Checksum Byte: 00
        Think Flag: 1
        WinPE Partition (0-3): 2        Alt Boot Partition (0-3): 2
        Boot Config: 0 (Service Partition containing one Service OS)
        Boot State: 0                   Alt Boot Flag: 0
        (Normal booting operation, will boot to Customer OS)
        RRU: 00000000 00000000          Prev Active Part: 255
        Previous Partition Type: FF     Patch IN: 0     OUT: 0
        CIRT Disabled
        TOC: 0000000000000000           Lock: 0
        Show Error: 0                   Halt on Error: 0
        CIRT Load Return: 0
        CIRT Execute Return: 0
        Pause Duration: 10              Scan Code: 0085
        F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
        Check Msg: There has been a signature failure
# active type      start CHS      end CHS      startLBA       size
0   0x80   0x07      1   1   0   254 255 255           63    109675692
1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
3   0x00   0x00      0   0   0     0   0   0            0            0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
So you have actually regained the Lenovo bootmanager. But you are not done yet.
Step 14) Shutdown. Restart the system. DO NOT PRESS THE BLUE THINKVANTAGE BUTTON AT THE SYSTEM STARTUP SCREEN!!! IT DOES NOT WORK YET! When the system startup screen DISAPPEARS, quickly press F11 (maybe several times). The system should now boot the predesktop environment from the service partition.
Step 15) When the predesktop is there, choose "warmstart". When the system startup screen appears, press the blue Thinkvantage button. The system should again boot into the predesktop. The blue Thinkvantage button now works permanently.
Step 16) Check that you can boot Win XP and Win Vista/7 from the Windows bootmanager. You're done!

How to install windows 7 on my macbook pro mid 2009 using usb. right now aim using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me

how to install windows 7 on my macbook pro mid 2009 using usb. right now iam using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me.
Iam new to coding. please help me.

try the solution posted by kunu here and report back
https://discussions.apple.com/thread/5105056?tstart=0

How to install Windows 7 on a MacBook Air?

Hi everybody,
I am sorry in case this has been covered before, but i couldnt find anything searching different categgories here, so i´d appreciate some help.
I have got a late 2011 MacBook Air with lots of SSD and so on and i want to install windows 7.
I bought a wndows 7 OEM DVD (actually, two discs, one says support software)
I have tried to run bootcamp and follow the instructions, but to now end.
on my macbook air, i get the option "create a windows 7 disc" or something like that (the first option), which doesnt help me because i dont have optical drive
when i start boot camp on my iMac, this option will be greyed out.
Also, I have tried to to ISO copys of the windows DVD and save them to a USB stick but i just wouldnt come to any result.
does anybody have a good, comprehensive instruction on how to install windows 7 on an MBA withou optical drive?
Also, is 30GB OK for Win 7 if you basically dont wanna do to much in windows (no office etc, just some small clients)
thanks!

30GB is not enough, especially on an SSD. Normally 50-60GB and with SSD I'd go with 80-90GB.
http://www.apple.com/support/bootcamp faq, how to, special instructions for Air
There is a program to create DVD from ISO or .exe
Apple Boot CAmp Assistant should have prompted to save a driver for you to support a USB-DVD, in addition to the normal Apple B.C. drivers you save to flash card.
Disk Utility is not a good method for burning Windows DVDs.
http://simplyburns.en.softonic.com/mac
https://discussions.apple.com/thread/3241150

How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo

How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo:
I want to known how to install windows 7 on Old Macbook 15'inch 2.3 Core 2 Duo by using usb
I try many time, but after restart bootcamp partition, apple show blinking folder error
I think this firmware not support to install windows by usb
NOTE:
I Cannot install Apple New OSX Mountain Lion, Mavericks etc in this MAC
If I cannot install windows 7 on this MAC, so tell me what I will do with this MAC ?

I agree with the optical drive, mine acted strange, and i thought people were crazy and my drive was shot, but a simple cleaning disc worked miracles.
But- are you trying to reboot with both the USB install and the DVD install both plugged in? that would definitely cause confusion.
Do this, reboot with NOTHING plugged in. Once you hear the Mac chime, immediately press and hold option.
You should only see the Mac HD, and Recovery Partition.
THEN plug in your external DVD, and wait a min or two, you should see a disc icon appear next to the recovery partition that says something like windows. If that doesnt appear after a min or two, unplug it and put the USB stick and do the same thing. I had to do it this way on my mid 09 MBP.
Let me know if this works to start the install. If not we may have to start over with Bootcamp Assistant

I have Macbook Pro 13" mid 20012. How to install Windows 8 onto the mac using DVD? 10.8.3

the title says it all.
i have windows 8 DVD and i would like to have a clear instructions on how to install windows 8. I dont understand the need for USB

Welcome to the Apple Support Communities
You need a USB drive to install the Windows support software. It contains all the drivers that your MacBook Pro needs, and you will have to install them after finishing the Windows installation. If you don't install them, a lot of things won't work: the wireless card, the sound card, the brightness, the trackpad gestures... Apart from that, you don't need it for anything else.
Apple has released the official steps to install Windows 8 on a Mac, so if you want, print this PDF > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf

How to install Windows 8 on Macbook Pro w/ Retina Display?

Hi,
I'm new to Macbook Pro w/ Retina Display. I'm a non-tech guy. Well, I'm familiar with Windows PCs but not familiar with Macbook Pros and OS X.
Please if you people can step me step by step that how to Install Windows 8 on Macbook Pro w/ Retina Display 15 inch.
Because recently, Apple released OS X Update 10.8.3 which includes support for Windows 8 in Boot Camp.
I will be very thankful. Please help!
Thanks

Hi Mende1,
Thanks for the fastest reply. Well, As I said I'm non tech noob on Macbook Pro.
Well, The Guide is simple but there are few questions which I'm not able to understop still.
1. How to get the copy of Windows 8? I have bought Windows 8 Ultimate and I have Genuine Key with me but I don't have files.
2. Secondly, I have Bluetooth Apple Wireless Keyboard and Magic Mouse, Is this compatible with Windows 8?
Thanks

Tecra M2: How to install Windows XP through a LAN??

Similar Messages

Maybe you are looking for