Tecra M2 locks up when Intranet Browsing

We have two Tecra M2 machines in the company which connect in the office to our company LAN. When they are being used for surfing the Internet, they are fine - speeds are OK and pages load correctly. However - when users browse our company intranet, pages load slowly and the whole machine is tied up while pages load.
These are the only laptops that this occurs on. Desktops are fine and other Tosh models are OK. Has anyone else experienced this or found a fix?

Hello
In your case the very important is that LAN functionality is OK. If you have this kind of problem first you must contact your LAN administrator. I am pretty sure that they have a right explanation for this issue.
I am not a LAN expert but please ask your LAN administrator if you use a Proxy server. Check in your browser under Tools > Internet Options > Connections > LAN settings > Proxy server option. If the option is activate, you can find there a option called Bypass proxy server for a local addresses. Activate this option.
I am pretty sure that it should works much faster.
Bye

Similar Messages

Safari Locks Up When Choosing "Browse Files".

Hey there. Every time I click Choose File, or Browse for files, for example while uploading images, Safari locks up and freezes. If I leave it alone for say, 5 minutes, it will fix itself, and sometimes it works fine. If I drag the image into the choose file area, I can upload, I just can't browse for files.
Any idea how to fix this?

I'm running Safari 4.0.4. By the way, this happens with all browsers I have (Opera, Firefox, Chrome) when searching for files.

Lock/Freeze when in browser

When saving sessions or files, equal parts in both, my Audition 3 keeps freezing/locking up. I can't figure out one reason why... It's such a basic Windows call... and no this has nothing to do with previewing audio, during saving files and sessions there is no previewing audio.
Machine it's happening on:
Intel P4 3.8 gig
2 gig ram
1 terra byte local drives
1 terra byte USB2
M-Audio Delta 1010
Running Vista SP1

I'll be as specific as possible...
1. Not every time, it goes in odd waves, doesn't seem based on either time the program has been loaded nor complexity/size of session. I've had it lock over 10 times in a row, and I've gone 4-5 hours without a lock... Overall I would say about 30% of the time it locks.
2. Most often on Save As, sometimes open (even with every preview option turned off)... very... very rarely Save.
3. I have not had it lock during mixdown, or new multitrack creation.
4. The lockup happens almost always with an explorer window open (90% +), and almost always before you have a chance to type or click on anything at all (95% +)
5. The type of drive doesn't seem to matter... I have 3 local Sata Drives, 1 USB2, and 1 eSata... I've tried leaving all external drives unplugged, and tried saving to all drives, and yes tried to memory stick. The ratio of locking up seems fairly constant no matter what the drive... All drives (except memory are formatted NTFS and defraged & scanned regularly)
- Note, the drives it cache's too and the session drive used are local (internal) Sata drives, and the oldest is a year and a half old. The session drive is about a year old.
Hope that helps. I had a crazy weekend, I'll try to pull the cover tonight and drop in the motherboard information.
THANKS!!!!

Finder locking up when browsing Time capsule hard drive

Finder locking up when browsing Time capsule hard drive
I am able to browse the hard drive preview some videos or open files for around 5-10 mins then Finder locks up. Internet still works and I can relaunch Finder and then works for a while again. It sounds like the hard drive is just going to sleep. I watch some films directly off of the hard drive through VLC and these just stop wilst viewing them.
I am on 10.6.2 working on the 5GHZ channel on dual band time capsule.
It is really annoying I have tried a few things like resetting the DCHP Lease. But it seems to be specific to the hard drive as the internet still works fine. It is really annoying as it jams up the finder really awkwardly.
Ant ideas most wanted
Thanks

Are you browsing/viewing files in Time Machine backups on your Time Capsule, or files you've put there yourself?
If the files are Time Machine backups, use the Time Machine interface (the "Star Wars" display), via the Time Machine icon in your dock (or in your Applications/Utilities folder) to see what's there. Backups are not meant to be used; they're duplicates that can be restored in case of a problem with the originals on your system.
If the files are things you put there, you'll do better browsing, searching, or re-posting in the +Time Capsule+ forum, hiding in the +Digital Life+ section, at: http://discussions.apple.com/forum.jspa?forumID=1253

Firefox locks up when it is opened

turned on the computer last week and when I opened firefox an update quickly flashed before it opened. Then when it opened the firefox update page and my yahoo page were on separate tabs. It prompted me to continue a session or end it. At this point no matter what I do it locks up. Now days later the home page opens but lock up when I click on anything including scrolling the home page.

I have the same problem (I use IE 7 as my browser). I have had the same problem with all the versions 7.1 as well. There have been numerous posts about it and it seems that Apple does not want to fix this. I uninstalled it and reinstalled version 7.0x via
http://www.filehippo.com/download_itunes/?1774
this version is once again working fine!

Siri says she can't read my email from the iphone5s lock screen when I'm using the standard headphones, but I could do that on 4s. How can I get my 5s to do that?

Siri says she can't read my email from the iphone5s lock screen when I'm using the standard headphones, but I could do that on 4s. How can I get my 5s to do that?

Hi Liz,
Sorry to hear you are having a similar problem. Last night I went to the tool bar at the top of iphoto, clicked on "File", then clicked "Browse Backups" in the drop down menu.    I have an external hard drive that is set up to Time Machine.   The Browse Backups opened the iphoto pages in the Time Machine. I selected a date one day ahead of the day I performed the now infamous update, and it showed my iphoto library as it had existed that day.   I then clicked "Restore Library" at the bottom right corner of the Time Machine screen.   Roughly 2 hours later my iphoto was back to normal.   When I opened iphoto there was a message saying I need to upgrade my program to be compatible with the new version of iphoto(version 9.2.1). I clicked "Upgrade" and within seconds it had done whatever upgrading it needed to do.
The only glitch in the restoration was that it restored the library as it appeared last week, so I no longer had photos I had imported this past weekend.   I simply went back to the Browse Backups in the drop down menu, when Time Machine opened I selected the page showing my pictures from this weekend and again said to Restore Library.   Roughly 45 minutes later the library was restored including the most recent photos.
I am now a happy camper.
I don't know if any of this will be of help to you because your email says you are having trouble with photos imported after the upgrade was performed.   Have you had any pop up notices when you first open iphoto, that tell you you need an upgrade to be compatible with the new iphoto?     If so have you clicked "upgrade"?
Good luck Liz, if you have Time Machine running as a back up to your library, maybe you wil be able to get help there, by following my instructions above.   Otherwise,   good luck with your investigations.   I'd be interested in hearing how you make out.
Karen

Destroy the session automatically when the browser is closed by user

Is it possible to automatically destroy a session when the browser is closed by the user with the X?
Basically, what we want to do is to create the same effect when the user is closing the browser (with the X button) as when the ordinary log out button is used. That is to have the session destroyed.
Any ideas?
/Carl-Johan

Hope this helps...
Refer note : 904155
from SAP Note 904155----
Symptom
A BSP application is not terminated correctly when the user closes the browser window or navigates to other URL.
The popup window, which appears on browse closure, contains the
text representing <img> HTML element content in the escaped
form, like that:
<IMG WIDTH=quot; HEIGHT=quot; SRC="...
After the popup disappears, the session remains opened.
Since the session is not removed, that may result in database locks that still remain and can be found in transaction SM12.
Other terms
Business Server Pages, WebAS, sessionexit, session termination, SM12, SM04, SYSTEM, session_single_frame.htm
Reason and Prerequisites
Reason:
The problem is caused by the minor code inconsistency in BSP application SYSTEM -> page SESSIONEXIT.HTM.
Prerequisites:
1. The application is using the SYSTEM application page SESSIONEXIT.HTM for logoff. When it runs, suddenly HTML source code appears on the logoff screen.
2. SAP_BASIS 620 SP57 or SAP_BASIS 640 SP15 or SAP_BASIS 700 SP06 are installed.
Solution
Please install SAP_BASIS 620 SP58 or SAP_BASIS 640 SP16 or SAP_BASIS 700 SP07
or
apply the code correction as described below:
1. Go to BSP Application SYSTEM.
2. Select page SESSIONEXIT.HTM and turn on Change mode.
3. Change the line:
<%=application->session_exit( exit_url = app-exit_url namespace = app-appl_ns name = app-appl_name page = app-page_name )%>
to:
<%raw=application->session_exit( exit_url = app-exit_url namespace = app-appl_ns name = app-appl_name page = app-page_name )%>
Arun
P.S Assigning points is a way of saying thank you on SDN
Message was edited by: Arun Varadarajan

OSX locks up when I plugin in headphones on MacBook Pro

Every time I plug in (or off) my headphones (even white iPhone ones), OSX locks up for about 10 seconds, and then works as normal, and even displays the beach ball. Not everything locks up, as I can still switch screens, etc, but I think the Finder does.
Initially I thought this was related to flash, as the flash player would stop working, but this happens even when the browser is closed.
I don't have any audio related apps installed.
Does anybody have any ideas of what could causing this, or tips on how to track down the problem?

Every time I plug in (or off) my headphones (even white iPhone ones), OSX locks up for about 10 seconds, and then works as normal, and even displays the beach ball. Not everything locks up, as I can still switch screens, etc, but I think the Finder does.
Initially I thought this was related to flash, as the flash player would stop working, but this happens even when the browser is closed.
I don't have any audio related apps installed.
Does anybody have any ideas of what could causing this, or tips on how to track down the problem?

My Nano locks up when I try to sync it. My touch, and IPAD sync great

my Nano locks up when I try to sync it. My touch, and IPAD sync great. I have reset my nano and no better??

Do you have any better luck with that if you update to iTunes 10.6.1.7?
From the notes for the release:
iTunes 10.6.1 provides a number of improvements, including:
• Fixes several issues that may cause iTunes to unexpectedly quit while playing videos, changing artwork size in Grid view and syncing photos to devices.
• Addresses an issue where some iTunes interface elements are incorrectly described by VoiceOver and WindowEyes.
• Fixes a problem where iTunes may become unresponsive while syncing iPod nano or iPod shuffle.
• Resolves an ordering problem while browsing TV episodes in your iTunes library on Apple TV.
http://www.apple.com/itunes/download/

Lock tables when load data

Are there any way to lock tables when i insert data with SQL*Loader? or oracle do it for me automatically??
how can i do this?
Thanks a lot for your help

Are there any problem if in the middle of my load (and commits) an user update o query data ?The only problem that I see is that you may run short of undo space (rollback segment space) if your undo space is limited and the user is running a long SELECT query for example: but this problem would only trigger ORA-1555 for the SELECT query or (less likely since you have several COMMIT) ORA-16XX because load transaction would not find enough undo space.
Data is not visible to other sessions, unless, the session which is loading data, commits it. That's the way Oracle handle the read committed isolation level for transaction.
See http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96524/c21cnsis.htm#2689
Or what happens if when i want to insert data someone has busy the table?You will get blocked if you try to insert data that has the same primary key as a row being inserted by a concurrent transaction.

Lock Code when turn on - 5800XM

When I had v40 I had to tenter the Lock Code when I turned the phone on (something I did rarely so no problem).
When I updated to v50 it doesn't ask for the Lock Code now. Any one know how I can set this to happen please?
Mark

I tried to paste something from the extended user manual, but it looked weird on the screen, so I've tried to make it look sensible. I hope the following does the job:
Select Menu > Settings and Phone > Phone mgmt. > Phone and SIM card. PIN code request — When active, the code is requested
each time the device is switched on.

PSU causing lock ups when gaming? K9A2 Platinum

I am having black screen and occasionally grey screen lock ups when Im playing games. It can happen within 10 minutes or up to an hour. I have to press the power button to restart and dont get any windows errors or blue screen. I have no issues when watching videos or just tooling around. My PSU is a OCZ600MXSP and Im thinking its not up to spec. I have everything running stock. Is it likely my PSU doesnt cut it or is the black/grey screen freeze thing an cpu/gpu overheating issue?

All of my drivers are up to date (I do use driver sweeper as well). It happens pretty much in all games, from BFBC2 and TF2 to some crappy kid game my son plays online (Wizard 101?). Im not sure what the temps are under load but at idle they are good (cant recall what exactly they were but were in the proper temp range). My monitor has just finally died as Im typing this on my laptop (bad caps on power board ) so Ill test the temps while gaming when I can hook it up to my big LCD.
Could the lock up with no blue screen/error report indicate a component overheating?

Lock-up when opening file

I have a problem with dreamweaver locking up when I open a
file. The index file, other files open up fine. I am thinking I
need to delete the preference files but don't know how to do this.
Can someone help me on this?

If it's just that one file and dw works normally on other
files- then it is
probably what's IN that file that is causing the problem.
url address of the uploaded problem file?
> I have a problem with dreamweaver locking up when I open
a file. The index
> file, other files open up fine. I am thinking I need to
delete the preference
> files but don't know how to do this. Can someone help me
on this?

Windows always shows lock screen when idle, ignores setting

On Windows 8, I had my computer set up so that the screen would turn off after a period of inactivity. When I would move the mouse or press a key, it would resume without asking me to log in. After upgrading to Windows 8.1, it is now always showing me the
lock screen when resuming from idle. In the lock screen settings, I found a new option named "When my PC is inactive, show the locks screen instead of turning off the screen". I have disabled this setting, but my computer still locks every time the
screen turns off.
How can I get my computer to stop locking when it is idle?

Hi,
What about the settings in Screen Saver? Please check the Option "On resume, display logon screen" is unchecked.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

2nd iPod Classic locking up when connecting to MacBook Pro

I'll sum up the lead-in story as best I can.
I have a 2010 MacBook Pro 13". Just got an new iPod Classic a couple weeks back. I discovered that when playing the iQuiz game, I had a few lock-ups (freezing). Then a handful of times, it locked up when connecting it to the MacBook for charging or syncing. It didn't lock up EVERY time. But about 1 out of every 4 syncs on average.
I naturally thought something was wrong with the Classic, and brought it into the Apple store when it was locked up, and they gave me a new one.
But now this one is doing the same thing. Occasional lock-ups when connecting to the MacBook Pro. Doesn't matter which USB port. And doesn't seem to matter if the computer has been on, or if it's a fresh boot.
What could be going on here? I doubt highly that both Classics I've gotten have the same exact issue with occasional lock-ups when connected to the computer. My MBP otherwise has given me no problems. And no problems with other USB devices, ever.
Any ideas?

Update: bought a new usb sync cable to try, and no change. the Classic locked up the first try with the new cable.

Tecra M2 locks up when Intranet Browsing

Similar Messages

Maybe you are looking for