Tecra M2 PTM20A-002T2 - Need ethernet and display drivers
Please help me with an answer!
I have spent hours chasing files and installing different stuff.
Got my sound working but still need ethernet and display drivers I think.
I am online for about 15 minutes and back on tonight.
Thanks, Nay,
Melbourne, Australia
Hi Nay,
Alternative have a look on the Toshiba European page. There I founded a similar model, Tecra M2 PTM20E, and I think the downloads should also work for your model:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Furthermore you can see an installation instructions document for Windows XP. Its a list for the recommend driver installation order, tested by Toshiba. :)
Last but not least you can identify the hardware using hardware and vendor ID. Therefore check this article:
[How to identify an unknown device (e.g. Wireless LAN module)?|http://aps2.toshiba-tro.de/kb0/HTD0302U00000R01.htm]
Similar Messages
-
S5503w win7 64bit ethernet and audio drivers
I recently acquired a Pavilion Slimline (s5503w) desktop PC. For whatever reason the hard drive was blanked out when I recieved it and upon installing Windows 7 64-bit (Ultimate Ed) I've had quite some time locating the proper drivers. Attempting to use the recommended drivers from this website resulted in a 9996 error, you don't meet the requirments. Proper recommended installer for that version of windows, but no luck. I've also tried installing the Ethernet and Audio drivers recommended by Nividia's website. A 15.49 package, but though it recognizes the video card it doesn't notice the onboard Ethernet or Audio. Neither of these devices is listed in device manager as far as I can tell either. No typical yellow exclemation mark stating that the driver is missing.
Any help or a point in the right direction would be greatly apperciated.Hi:
I don't think there is anything wrong with the hardware.
I would reinstall W7.
Then right afterward, install that nForce chipset driver first and reboot.
Then the video driver I posted and reboot.
Then the audio driver I posted and reboot.
If you still have issues, try a manual install.
Download the free 7-zip file utility and extract the files you downloaded into folders.
Then click on each device in the device manager that needs the drivers.
Click on the driver tab, click on update driver, select the Browse my computer for software and browse to the folders you extracted for each device.
Make sure the Include Subfolders box is checked and see if the drivers install that way.
There has to be a way to get these items installed.
If you stil can't get the drivers installed, please post the hardware ID's for each device needing drivers so I can confirm that they are what they are supposed to be according to the product specs for your PC.
If you don't know where to find the hardware ID, please read the info at the link below.
http://www.devicedriverfinder.com/blog/device-drivers/how-to-check-the-hardware-id-for-a-windows-dev... -
Thunderbolt for ethernet and display at same time
i need to use my thunderbolt port for both ethernet and extended display. can i split the thunderbolt?
Hello berstler
One way you can do that is with the Apple Thunderbolt Display as it has a built in Ethernet port. You may want to look at a Thunderbolt Express Dock from Belkin to see if that would be a potential solution.
Apple Thunderbolt Display (27-inch)
http://store.apple.com/us/product/MC914LL/B/apple-thunderbolt-display-27-inch
Belkin Thunderbolt Express Dock
http://store.apple.com/us/product/HB865ZM/A/belkin-thunderbolt-express-dock
Regards,
-Norm G. -
Replaced hard drive need ethernet and network controller
Hello
I replaced the hard drive on my satellite L655. I installed windows and used my existing key code. The laptop is telling me I have no ethernet and network controller. I have tried to find the correct drivers. Since I am starting the computer from scratch do I need to install other drivers as well? Please help.
Thanks
Heidi
Solved!
Go to Solution.I'm so sorry, Heidi. I misread your first message. I thought you had restored the hard disk to its original out-of-the-box contents using Toshiba recovery media.
That's the best thing to do. All the drivers and utilities are properly preinstalled. Windows is preactivated.
If you failed to burn recovery discs, you can obtain them from Toshiba. Scroll down to Get Recovery Media here .
For instructions, see the section Restoring from recovery DVDs/media, which begins on p. 71 of the User's Guide.
Satellite L640/L650 Series User’s Guide
If you have problems with drivers after doing that, see my previous message.
-Jerry -
Need biometrics and masstorage drivers for Satellite A105-SP4088
Hi.
I need the biometrics and masstorage drivers.
Can someone say when i can download this drivers?
I search at all page of the Toshiba supports.
Recently formated my notebook. I don't have CD with drivers.
Thank,
Raul YahtnelDo you need drivers for Windows XP???
If yes then maybe this little info could be helpful for you.
After installing Windows XP there could be a yellow exclamation mark by a "PCI Memory Controller" or "Mass Storage Controller" in the device manager. This hardware will only supported by Windows Vista.
Therefore there is no Windows XP driver.
I agree about biometrics driver this could be a fingerprint reader.
Cheers -
Need sound and webcam drivers for Satellite A660-156
hi all,
my hard disk was physically damaged and replaced by new one. All data and setting were copied.
But I found that no sound and webcam drivers are installed. I successfully had found them and installed, but still no changes. See sound icon with 'no sound' indication, click on it to fix the problem, but no problems have been found.
Offered to see additional info or close the window. On Toshiba website found two sound drivers, but it doesn't help.
Any idea how to fix that problem?
Thnx in advance!Hmm I think you shoud ochekc if you have installed all the drivers in the right order:
Here is the one which i found in one thread:
1 Windows 7 64bit
2 QFE KB974332
3 QFE KB974431
4 QFE KB974571
5 QFE KB975467
6 QFE KB975806
7 QFE KB978258
8 QFE KB977620
9 QFE KB975777
10 QFE KB972270
11 QFE KB977609
12 QFE KB979099
13 QFE KB978251
14 QFE KB971468
15 QFE KB975560
16 QFE KB977074
17 QFE KB978207
18 QFE KB978506
19 QFE KB978262
20 QFE KB976422-x64
21 Registry Patch for System Restore V1.00.00
22 PlayReady PC Runtime 1.3
23 TOSHIBA Bulletin Board 1.6.07.0
24 TOSHIBA ReelTime 1.6.06.0
25 Intel Chipset SW Installation Utility 9.1.1.1024
26 Intel Management Engine Interface V6.00.40.1215
27 NVIDIA Display Driver 189.58
28 Intel Turbo Boost Technology Driver 1.1.1.1007
29 Intel Rapid Storage Technology Driver 9.5.7.1002
30 TOSHIBA Supervisor Password Utility 1.63.0.9C
31 TOSHIBA HW Setup Utility 1.63.0.22C
32 TOSHIBA Flash Cards support utility 1.63.0.6C
33 TOSHIBA Value Added Package 1.3.4_64
34 Realtek Audio Driver 6.0.1.6069
35 NVIDIA HD Audio Driver 1.0.9.1
36 Broadcom Wireless LAN Driver V5.60.48.35_DrvOnly
37 Synaptics Touch Pad Driver V15.0.8.1
38 TOSHIBA HDD Protection 2.2.0.4
39 Bluetooth Stack for Windows by Toshiba v7.10.10(T)
40 Realtek LAN Driver V7.013.0112.2010
41 Jmicron Card Reader V1.00.44.01
42 ENE CIR Driver (if available) V3.2
43 YUAN DVB-T/ATSC Tuner Driver (if available) 2.3.3.31
44 TOSHIBA Sleep Utility 1.4.1.1
45 TOSHIBA eco Utility 1.2.11.64
46 Intel Proset 13.1.1.0.1.s64
47 TOSHIBA HDD/SSD Alert 3.1.64.6
48 TOSHIBA Service Station 2.1.40
49 HDMI Control Manager 2.0.0.5.64
50 TOSHIBA Remote Control Manager 3.0.1.0
51 TOSHIBA PC Health Monitor 1.6.0.64
52 TOSHIBA Fingerprint Utility 1.0.2.27
53 ConfigFree 8.0.29
54 TOSHIBA Web Camera Application V1.1.1.15
55 TOSHIBA Face Recognition 3.1.3
56 TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-7
58 PatchFiles PCIIDEREG-1.1
59 PatchFiles TosVolRegulator_x64_1.1 -
Satellite Pro A200 PSAFCA: Need Lan and display driver for XP
Hey
please help me!
I have just installed XP on my new satalite pro, but i have had trouble with the drivers.
At the moment I have installed most but from this site i can't seem to find a driver that will help my network card, nor my video NIVIDIA drive...
any suggestions would be very valuableThe Satellite Pro A200 PSAFCA is not known to me. I know only the Satellite Pro A200 PSAE1, PSAE4 and PSAE7. So could you please confirm your Pro A200 series?!
If you cannot find the single XP drivers on the Toshiba page I would recommend checking the LAN and the graphic chip which is installed on the motherboard and use the XP drivers from the chip manufacture.
If you need an graphic driver I would recommend using the drivers from the www.omegadrivers.net or www.laptopvideo2go.com site
Regards -
Need audio and modem drivers for Tecra A6
Hi there,
I couldn't find the drivers (audio+modem) Tecra A6 EZ6411 for WXP SP2.Hi
and why you dont visit the Toshiba driver page and download the right drivers???
The Toshiba driver page provides XP drivers for Tecra A6 PTA60E and for Tecra A6 PTA61E.
If you dont know what Tecra you exactly have please check the label at the bottom of the unit!!!!
I hope and think that everything is clear now.
Have a nice day ;) -
Tecra R840 - Ethernet and sound driver Dynadock issue
Hey,
Tecra R840, model PT429A-007004, does not work correctly with the Toshiba dyna dock.
Specifically, the Ethernet and the audio driver for the dyna dock is not installed after running either the driver install from the dyna dock cd or running the latest driver from the website.
Does anyone know a fix for this?
Note: there is nothing in device manager to say that these drivers for the dock a missing, only when installing the driver does the wizard mention that the Ethernet and audio drivers could not be installed.
It also mentions that the dynadock has an issue with the on board graphics card but we have not had any issues with graphics, i.e. screens.Hey,
Sorry for the late reply.
That fix does not resolve the issue.
Manually adding the drivers removes the yellow exclamations marks and fixes the audio, but it does not fix the Ethernet connection. So, currently we have had to plug the Ethernet cable directly into the model of laptop mentioned above instead of the dock.
Firmware update has not helped.
Can anyone from Toshiba please test this and let me know their thoughts or perhaps a solution if found? It would be greatly appreciated. -
I have a MacAir, mid 2011 model, and want to view video on my TV. I see that I need a mini display port to Hdmi but there are many of these. What exatly do I need and how does one go about viewing a movie downloaded to the MacAir on a TV screen?
Welcome to Apple Support Communities
That's exactly what you need. A Mini DisplayPort to HDMI adapter and a HDMI cable. See > http://support.apple.com/kb/HT4241?viewlocale=en_US
This is the only way to view a video on the TV. After connecting your MacBook Air to the TV, image on your TV should show immediately. Then, press Command and F1 keys to mirror your MacBook Air display, and open the video -
hey ppl
i have a datagrid in my form.i need to read input(fields..sort of a database) from a text file and display its contents in the datagrid.
how can this be done.. and also after every few seconds reading event should be re executed.. and that the contents of the datagrid will keep changing as per the changes in the file...
please help as this is urgent and important.. if possible please provide me with an example code as i am completely new to flex...
thanks.....It's not possible to read from a file without using classes from the core API*. You'll have to get clarification from your instructor as to which classes are and are not allowed.
[http://java.sun.com/docs/books/tutorial/essential/io/]
*Unless you write a bunch of JNI code to replicate what the java.io classes are doing. -
// Code Help need .. in Reading CSV file and display the Output.
Hi All,
I am a new Bee in code and started learning code, I have stared with Console application and need your advice and suggestion.
I want to write a code which read the input from the CSV file and display the output in console application combination of first name and lastname append with the name of the collage in village
The example of CSV file is
Firstname,LastName
Happy,Coding
Learn,C#
I want to display the output as
HappyCodingXYZCollage
LearnC#XYXCollage
The below is the code I have tried so far.
// .Reading a CSV
var reader = new StreamReader(File.OpenRead(@"D:\Users\RajaVill\Desktop\C#\input.csv"));
List<string> listA = new List<string>();
while (!reader.EndOfStream)
var line = reader.ReadLine();
string[] values = line.Split(',');
listA.Add(values[0]);
listA.Add(values[1]);
listA.Add(values[2]);
// listB.Add(values[1]);
foreach (string str in listA)
//StreamWriter writer = new StreamWriter(File.OpenWrite(@"D:\\suman.txt"));
Console.WriteLine("the value is {0}", str);
Console.ReadLine();
Kindly advice and let me know, How to read the column header of the CSV file. so I can apply my logic the display combination of firstname,lastname and name of the collage
Best Regards,
Raja Village Sync
Beginer CoderVery simple example:
var column1 = new List<string>();
var column2 = new List<string>();
using (var rd = new StreamReader("filename.csv"))
while (!rd.EndOfStream)
var splits = rd.ReadLine().Split(';');
column1.Add(splits[0]);
column2.Add(splits[1]);
// print column1
Console.WriteLine("Column 1:");
foreach (var element in column1)
Console.WriteLine(element);
// print column2
Console.WriteLine("Column 2:");
foreach (var element in column2)
Console.WriteLine(element);
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP] -
two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.
https://www.dropbox.com/home/iphone
https://www.dropbox.com/home/iphonehttps://www.dropbox.com/home/iphoneMake an appointment at the genius bar of your local Apple Store. The phone has a 1 year warranty. If it's no longer under warranty, a replacement is $269.
-
ALV - need to sum values of internal table and display in ALV
I have data in internal table as:
Material date sum1 sum2
Mat_A 19990101 4 4
Mat_A 20080501 3 0
Mat_A 20080601 2 0
Mat_B 19990101 2 0
Mat_B 20080601 5 5
Required output is :
Material qty1 qty2 19990101 20080501 20080601
Mat_A 432 4 4 3 2
Mat_B 2+5 5 2 5
Thinking of using ALV to pass the internal table and display as classical report (and also to save as excel spreadsheet).
Counting your help on the following questions:
1) How to accomplish the sum in ALV report? Can ALV FM do that or one has to use ABAP to compute the sum from the given internal table?
2) Mat_A can have more date values. Here it got 3 distinct date values 19990101, 20080601, 20080501. If it has say 5 date values, how to create the ALV date columns (from 3 to 5 date columns) dynamically?
Thanks for the help.for the sum inalv we use generally..
it_fieldcat-do_sum = 1.
check this examples...
http://www.****************/Tutorials/ALV/Subtotals/text.htm
*& Report ZTEST_ALV_PERC_13317
REPORT ztest_alv_perc_13317.
TYPE-POOLS: slis.
DATA: it_fieldcat TYPE slis_t_fieldcat_alv,
wa_fieldcat TYPE slis_fieldcat_alv,
it_events TYPE slis_t_event,
wa_events TYPE slis_alv_event,
it_sort TYPE slis_t_sortinfo_alv,
wa_sort TYPE slis_sortinfo_alv,
l_layout TYPE slis_layout_alv.
TYPES: BEGIN OF ty_itab,
field1(10),
qty1 TYPE i,
qty2 TYPE i,
qty3 TYPE i,
dummy TYPE c,
END OF ty_itab.
DATA: itab TYPE STANDARD TABLE OF ty_itab WITH HEADER LINE,
itab1 TYPE ty_itab.
START-OF-SELECTION.
itab-field1 = 'FIRST'.
itab-qty1 = 2.
itab-qty2 = 1.
itab-qty3 = 5.
itab-dummy = 10.
APPEND itab.
itab-field1 = 'FIRST'.
itab-qty1 = 2.
itab-qty2 = 1.
itab-qty3 = 5.
itab-dummy = 10.
APPEND itab.
itab-field1 = 'FIRST'.
itab-qty1 = 2.
itab-qty2 = 1.
itab-qty3 = 5.
itab-dummy = 10.
APPEND itab.
wa_fieldcat-col_pos = 1.
wa_fieldcat-fieldname = 'FIELD1'.
wa_fieldcat-tabname = 'ITAB'.
APPEND wa_fieldcat TO it_fieldcat.
wa_fieldcat-col_pos = 2.
wa_fieldcat-fieldname = 'QTY1'.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-do_sum = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
wa_fieldcat-col_pos = 3.
wa_fieldcat-fieldname = 'QTY2'.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-do_sum = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
wa_fieldcat-col_pos = 4.
wa_fieldcat-fieldname = 'QTY3'.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-do_sum = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
wa_fieldcat-col_pos = 5.
wa_fieldcat-fieldname = 'DUMMY'.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-do_sum = 'X'.
wa_fieldcat-no_out = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = it_events
EXCEPTIONS
list_type_wrong = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = it_fieldcat
TABLES
t_outtab = itab
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
ENDIF. -
my phone has just suddenly stopped working today was fine this morning then suddenly showed a message saying needs activating and connect to i tunes . i connected it to itunes and nothing happened but phone started to work fine so i disconected it from the laptop it worked fine untill it went to lock then showed the same message again .please can anybody help as i am ready tear my hair out!
In settings>general> cellular do you have it turned ON?
Maybe you are looking for
-
Not able to pass input to XMLType datatype.
hi, CREATE TABLE xml_data_test(xml_data XMLTYPE); Create Or replace procedure XML_SP (P_XML XMLType) as begin Insert into xml_data_test Values ( (P_XML) ); end; exec XML_SP ('<MAIN><INFO> <COLUMN_NAME>COL1</COLUMN_NAME><DATA_TYPE>CHAR(1)</DATA_TYPE><
-
I don't know how this happened. Everything was fine last night. Is there something I need to check in View?
-
IS-Retail POSDM- double posting of material documents and billing document
Hello All, I had initially posted this question in "Industries Solution General" forum. Reposting it in the appropriate forum- We have a nightly job for program "RWPOS_PARA_ENQUEUE" which processes all WPUBON idocs (sales info) that comes in from POS
-
Z30 - Music & Neutron App do not see music files in micro SDXC card now and then
I have my Z30 about a week now. So far so good. This morning, all of a sudden the native Music & Neutron App do not see the music files on the 64 GB micro SDXC card. The files are there when I checked with file management. I restarted a few times and
-
why is it my upload speed is getting slower and slower started a 17 meg now been on a few weeks started dropping its already at 9 meg i am o.4 kilometers from the cabinet the engineer told me it was one of the best balanced lines he has ever tested