Tecra M4: TV s-video out does not work with Vista

I have windows vista ultimate on Tecra m4.
I tried to get tv out through s-video but nothing happened.
I tried fn+f5 but it shows only Lcd choice with no other choices.
While it works good with windows xp tablet edition I installed the newest driver offered by toshiba but nothing happened.
The same problem is still here; no tv out.
Can any one help me

Hi
As far as I know the Vista drivers are not available for the Tecra M4 at this time.
I have checked the Vista driver download site and the M4 is not listed.
I think you have to wait for compatible drivers
If you install the graphic driver, you should check the Nvidia display settings. There you could choose between the TV, analogue display and digital flat display.
There choose TV and configure it via device settings

Similar Messages

Satellite 1800-100: video-out does not work

He,
I just installed windows XP on my old Satellite 1800-100, but now my video-out does not work anymore. So I just downloaded the latest driver, but there's no way I can get it installed. According to Windows the new driver isn't newer, so it won't let me update it. And when i try to unistall the display driver, I have to reboot before it takes effect, and wile rebooting it automaticly installs the standard driver again.
Can anybody help me?
Greets,
Daan

Hi
Do you mean TV- out port or monitor port? As far as I know this unit is preinstalled with WXP Home and all drivers can be also used for WXP Pro.
Did you preinstall your own OS (non recovery image)?

Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
I have had this working previously but at the minute it seems to not be playing ball....any thoughts
Thanks
Dan

BUMP
Any ideas?

Tecra S1 video out does not work

Hi,
I tried to connect my TS1 via cinch to a beamer. Unfortunately because of other reasons I can not use VGA.
However I do not get any signal at all. I tried nearly everything. I installed Windows XP with Toshiba Recovery CDs again, but it does not work either.
Is there anyone knowing what to do?
Best wishes,
Markus924

hi Markus924,
do you have a picture on the internal lcd?
via chinch to a beamer - this wont work...
you get a pal/ntsc signal from this connector.. i am not sure if your beamer can handle this sort of signal...
take a vga cable to try *and* install the "fn-f5" tool from toshiba to switch the picure to external display.

Internet Security Suite does not work with Vista 64 bit

After attempting to use the Chat Help, twice, and spending hours in queue before getting kicked off, I finally called Support to find out why my new Vista computer was not running the Internet Security Suite that I downloaded. Yes, I found the link to "download to a second computer" and went thru all the steps. Got lots of positive feedback: little bars were filling in letting me know I was 40%, 72%, 100% done, etc.. Was given a window allowing me to Run or Don't Run the software. It all seemed to go very well. However, when the "download and installation" was complete, there was no new software running anywhere on my computer. Couldn't find it in the Control Panel, the Start menu, or the system tray. Called Support and spent at least 30 minutes on the phone with a "technician" (and I use that term VERY loosely) who had to have major assistance from a co-worker before he could even start screen-sharing with me and, during the course of our time together, made the following brilliant remarks:
Upon seeing my desktop wallpaper (which is a lovely photo of some cliffs and a lake - and it came with Vista), he wanted to know what the picture was. Not where it was taken, but just what it was. His exact comment was "Does your screen always look like that?". I had to dig deeper to determine if he was asking about a particular icon or some other computer related concern that he saw (he was "technical support", after all), but he was just asking about the stupid photo.
He couldn't find the Control Panel in the Start Menu until after trying several times, and then he couldn't navigate to the Programs area very well (I had to give verbal hints as to where it was), and his brilliant comment then was "I really need to go to my mom's house and get on her new laptop and try out Vista." Can you believe that Verizon has technical support folks who have never used Vista? It's not like Vista just came on the market yesterday!!
So, when he finally decided that he was not going to be able to help me, he didn't offer me any other recourse. He just stated over and over that he was not sure how to solve this issue. Oh, and this was after I re-downloaded ISS (again, "successfully"). I had to ask if there was someone else there who could possibly help me. He offered to put me on hold (for the 2nd or 3rd time at this point) to check around. When he returned to the phone, it was obvious that someone else was operating the mouse in the screen sharing mode because the operator moved confidentially around the screen and went immediately to system properties and saw that I am running Windows 64 bit. The other operator then told my guy to tell me that ISS only works with Windows 32 bit. Their final resolution was that I should call billing on Monday and end my subscription. I think that may be the only good advice I was given that day.
So, am probably going to renew my trial version of Norton on this new computer and remove ISS from the laptop and put Norton on there as well. Apparently, they are up to date with this fancy new technology. At least they probably know about sophisticated and highly technical stuff like desktop wallpaper.

I have been trying to get somewhere with this Internet Security Suite...and now have come to the conclusion this is not going to work. Now running Vista 64 bit, and have gotten nothing but the run around to try to complete the downloading of the program. I've contacted Verizon Tech Support...then tell me that this works with the 64 bit but I need to contact Windows as there is a glitch and they give you the steps to get thru it. Windows advises me to contact Verizon again as there are no problems with the OS. Also have contacted Radialpoint and once again nothing...Obviously the Secuirty is not compatible with Vista 64 bit yet, which I just can't believe like you said...it's not like it was just yesterday this OS came out. My frusteration comes from nobody steps up to take any responsibility as to what the problem is. If it is not compatible yet then say so and not waste my whole weekend trying to get a straight answer. I have other computers that I am currently using the service on and do like the program, but as for my Vista 64 bit looks like I may go to Macafee for protection. It just amazes me as big as Verizon is and as popular this Vista has become they are not on the ball in keeping up with technology.

WRT610N disconnects and does not work with Vista or media center extenders like the DMA2200

Linksys and all other router manufacturers advertise the greatness of the wireless 5ghz band (especially with 802.11n), but I’m beginning to have my doubts. It is true that the 5Ghz band is hardly being used so you'll have virtually no one to compete with. However, the 5Ghz distance in no way compares to 2.4Ghz, and as a matter of fact, I find it to be quite terrible. At approximately 20 feet away, both my Linksys DMA2200 and HP notebook barely get 1 bar using the 5Ghz N band with my WRT610N router. In comparison, while using my 2.4Ghz WRT54g router, I get 5 full bars at that range, and at least 2 bars from anywhere else in my house.
I have all Linksys equipment in my house as I have been impressed with all of their 2.4Ghz in the past. However, I’ve recently upgraded everything to dual-band N equipment and found numerous flaws in each of the new devices, plus none of them really even play well together. My setup is: Linksys 610n router, DMA2200 media center extender, and a WUSB600N Dual-Band Wireless-N USB Network Adapter for my laptop – all of which are currently using the most up-to-date firmware. Other devices include a WRE54G extender and Nintendo Wii.
Problem #1) The LELA software with the new N devices doesn't even recognize that my DMA2200 is a media center extender. Using LELA, I should be able to select my media extender and allocate more bandwidth for streaming media. However, since my extender only shows up as an “unknown network device” those options are greyed out. I tried to manually change the device to a media center, but still no go. I suppose you can manually allocate bandwidth in the router setup somewhere, but considering these are all Linksys products, it’s absolutely ridiculous that an option specifically incorporated in the LELA software for a Linksys Media Extender does not work!!!
Problem #2) If you are only using one system with the router, the router might actually work as intended. For most of us though there are going to be at least 2 or more systems connected to the router (wired, wireless, or a combination of the two) such as a PS3, Wii, laptop, PC, media extender, Xbox, etc. If that’s the case, you’re probably screwed because you WILL experience frequent dropouts… ESPECIALLY if just one those clients is a VISTA machine. Check the Linksys forums and you will find that this seems to be a problem with all of the new Linksys routers (610N, 310N, and 110).
Here is a Microsoft article that explains the issue
http://support.microsoft.com/kb/928233/en-us
Problem #3) Because of problem #2 I will never be able to get rid of the dropouts since my network is using one of Linksys’s media center extenders. The DMA2200 is essentially a VISTA PC to some extent and accepts DHCP requests the same as a VISTA PC. Since it is not really a PC though, there is no registry modification that can be done to alleviate the VISTA problem (not that the registry mod really works anyways). So as long as I try to use my DMA2200 wirelessly with my WRT610N router, the frequent dropouts will occur and there’s nothing I can do about it. This is REALLY TERRIBLE since the DMA2200 is specifically designed to be used with the WRT610N router in order to take advantage of the 5Ghz band and wireless N transfer rates. You absolutely need 5Ghz wireless N to efficiently stream HDTV WIRELESSLY, but if you lose your connection every 10 minutes, it is impossible to watch any type of streaming media.
Problem #4) As mentioned already, when the “N” 5Ghz range is working on the WRT510N router, the distance sucks compared to standard 2.4Ghz G, N or mixed mode networks. You can try to make it better by strictly using N products, disabling the 2.4ghz band all-to-gether, and using the wider 40mhz frequency, but it doesn’t really help. The higher 5Ghz band is a more concentrated signal and therefore simply does not reach as far as the lower 2.4ghz band. I wonder why all of these new products state that the 5Ghz range will increase your distance, when in fact it actually makes it worse?
So… basically, this router does nothing that it claims too and is basically rendered useless on any network with a VISTA machine. This has not been addressed by any Linksys firmware updates or VISTA software updates so there is no reason to even consider using this router if you you’re using VISTA or some type of VISTA Media Center Extender such as the Linksys DMA2200.
Although, I’ve always sworn by Linksys in the past, the amount of wasted time, frustration, and horrible support has really changed my view about them. I’ve reverted back to my old trustworthy WRT54g router and had to run cable through my house so that I wouldn’t have to box my DMA2200 extender up and let it collect dust in the attic. It’s really disappointing that I spent all this money to buy this equipment specifically because they’re supposed to work together, but in fact they don’t. Plus what’s the point of having top notch wireless equipment if you have to run cables in order for them to work?
Message Edited by bobbodavis on 11-15-2008 07:37 PM

I have fixed all the IP adresses to avoid the DHCP problem but I still have problems.
I have sereval scenarioes:
1. MC < 1Gb wire > WRT610N < 5.0n WIFI > MX
I can see HDTV on this one but it disconnects
2. MC < 1Gb wire > WRT610N < 2.4b/g WIFI > MX
No HDTV and disconnections
3. MC < 2.4b/g WIFI > WRT610N < 2.4b/g WIFI > MX
No HDTV but no disconnections - but very slow and streaming like youtube
4. MC < 100Mb wire > WRT610N < 2.4b/g WIFI > MX
No HDTV but nice picture - testing for disconnections right now - 30+ min.
Result:
This test was very good. Stabil streaming, no disconnects for an hour. Won't support HDTV but the rest seem to work fine.
5. MC < 100Mb wire > WRT610N < 5.0n WIFI > MX
Not tested yet - looking forward to this - might bring me HDTV.
Result:
This gives HDTV but there is a problem with stability on the streaming but very difficult to see on the picture. Testing for disconnects - now tested for 30 min. - no disconnects.
This looks really promissing.
I am pretty sure that the WRT610N have a problem in the switching part of the router specially when it has to switch from 1G to WIFI. I bought the WRT610N to get HDTV on WIFI and Cisco markets the DMA and WRT610N as a perfect match. But it definately have problems - i still do not understand their silence about this.
I will come back with the last results when I have them
/John
Message Edited by Infraxpert on 01-05-2009 04:38 PM
Message Edited by Infraxpert on 01-05-2009 05:35 PM

S-video output does not work with iOS5.1.1 via ipod dock

After upgradig my Touch to iOS5.1.1 I cannot see video etc. on my TV via my Ipod Dock.
It was working fine before the upgrade.
The ipod is telling me, that it's connected to the TV, but nothings appears on my TV.
It was working fine before the upgrade.
I have tried to contact Apple Support but I have not succeded finding out how to contact them about the bug.
Anyone else experience same problem?
Regards
obertel

I have the same issue with my iHome iW1 AirPlay. After updating both my iPhone 3gs and ipad 3, it cannot use my iW1 with airplay. Also when I plug one of my iOs device to the iW1 I get the infamous "Charging is not supported with this accesory"....
Anyone got a workaround?

DVI video out suddenly not working.

That's basically it. I have a 23-inch Cinema HD Display at home and at the the office. Suddenly the video out is not working with either of them. The displays control panel lists the external display, so the system is detecting the connected display.
There is nothing wrong with the displays. I connected an old PowerBook and they light up fine. With my MBP, the power light lights, but nothing is displayed on the Screen.

there's a somewhat similar thread "external monitor stopped working" with no answers
my 17" Studio display works as 2nd mon on other computers
my dvi out does work with a vga monitor and adapter, of course :))
i'm using the dvi to adc adapter -- could this be involved somehow?
my laptop display goes blue when i plug in the external monitor as it should, but the 2nd monitor never wakes up, turns on, etc.

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

Video Filter does not work.

Hello.
I have been using Final Cut Pro 4 for a while and it worked fine before. But recently, any function of Video Filter does not work. I apply them to the clip, but the image does not show any changes on Canvas.
Is the software's problem?
Thanks in advance.
Ying

For a reason unknown to me, FCP's preference files (there's 3 of them) will sometimes become corrupted and need to be trashed. Usually the symptoms are things just not working as they did earlier, or weird issues like the 3 Way Color Corrector looks different than before ... stuff like that.
FCP Rescue is a freeware app (yes, you'll need to download it) that will create a backup set of preferences, thereby retaining all of your settings. Then when (not IF, but when) FCP's preferences become corrupted, you can run FCP Rescue to replace the bad set with a fresh new set.
Otherwise you can delete the files yourself (make sure FCP isn't open at the time) and the next time you launch FCP, it will revert back to the factory settings.
-DH

Upgraded to iOS5.1 and now video out is not working. How do I fix this?

After upgrade to iOS 5.1 the video out is not working! Anyone have this problem? Is there a fix for this?

OK so I went to the Apple Store and they said my cable was a third party cable. We tried an apple cable and it worked! So Apple changed the pin out configuration on the OS 5.1 upgrade so only Apple cables will work! So I had to shell out another $40.00 to get that cable!

Sharepoint 2013 list view quick edit does not work with out remote API permissions

sharepoint 2013 list view quick edit does not work with out remote API permissions.
When I give Use Remote Interfaces - Use SOAP, Web DAV, the Client Object Model or SharePoint Designer interfaces to access the Web site it works which is not an ideal situation..
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

This is true. If you use Fiddler to watch the requests from the list view quick edit you can see CSOM calls. For example when changing a value in a cell, when you tab out you will see the SetFieldValue and Update method calls on the list item.
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer

ACROBAT XI - DOES NOT WORK WITH WINDOWS VISTA

WHY DOESN'T THE COMPANY STATE ACROBAT XI PRO DOES NOT WORK WITH WINDOWS VISTA.
THE COMPANY NEEDS TO WARN PEOPLE. THE ACROBAT TECH SUPPORT FINALLY FIGURED OUT THAT IT'S NOT COMPATIBLE WITH WINDOWS VISTA.

The Acrobat website and the box lists the compatible OSs. You want Adobe to list all of the incompatible OSs---going back how far.
Acrobat XI Pro system requirements
These system requirements are for Adobe® Acrobat® XI Pro software, v11.0. Because system requirements change with each software update, refer to the Release Notes for your software version for the latest information on supported operating systems and browsers.
Windows
1.3GHz or faster processor
Microsoft® Windows® XP with Service Pack 3 for 32 bit or Service Pack 2 for 64 bit; Windows Server® 2003 R2 (32 bit and 64 bit); Windows Server 2008 or 2008 R2 (32 bit and 64 bit); Windows 7 (32 bit and 64 bit); or Windows 8 (32 bit and 64 bit)
512MB of RAM (1GB recommended)
1.85GB of available hard-disk space
1024x768 screen resolution
DVD-ROM drive
Internet Explorer 7, 8, 9, or 10; Firefox Extended Support Release; or Chrome
Video hardware acceleration (optional)
Note: For 64-bit versions of Windows Server 2003 R2 and Windows XP (with Service Pack 2), Microsoft Update KB930627 is required.

Adobe Flash Player does not work with Safari. What can I do?

Hi,
I have a MacBook Pro, Retina, 15 inch, late 2013, 2 GHz Intel Core i7, using OS X 10.9.4. I have installed Adobe Flash Player. In my System Preference, in the advanced settings, it is set to install updates also tells me that I have the NPAPI Plug-in (version 14.0.0.145) installed but not the PPAPI Plug-in. Is this the reason why it does not work with Safari (keeps telling me to download the app, which I did but still does not work)? Is there any way I could fix the problem? Please, help.
Thanks.

If you can't install or update Flash, follow these instructions.
If you have installed the latest version of Flash, please take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 8. Back up all data before making any changes.
Step 1
You might have to log out or restart the computer before a Flash update takes effect.
Step 2
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
           ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
Step 3
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 4
a. If you get a warning of a "blocked" or "outdated" plug-in, then select the Security tab in the Safari preferences window. In the list of plugins on the left, there should be one—and only one—entry for "Adobe Flash Player," showing the same version number that you installed. Select that entry. On the right there will be a list of websites for which you have specifically allowed Flash, if any. It's normal for the list to be empty. Below that is a menu labeled
          When visiting other websites
From that menu, select either Allow or Ask.
b. If you still get the alerts, then go back to the Flash Player preference pane and select the Advanced tab. Click Check Now. Quit and relaunch the browser.
c. If the alerts still persist, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
          Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 5
In the Safari preferences window, select the Advanced tab and uncheck the box marked
          Stop plug-ins to save power
Step 6
Open this folder as in Step 4:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
          Flash Player (failing).plugin
You may be prompted for your login password.
Step 7
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 8
If you get a "missing plug-in" error, select
          Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
          Allow (or Enable) plug-ins
Then click the button marked
          Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 9
Select
          Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.

Flash player does not work with Ie or Firefox with win 8.1?

Flash player does not work with Ie or Firefox with win 8.1 64, If i try and play a video I get the message to install Flashplayer.
If I try and install it it says it is already installed. Your onsite installer says it is not applicable to my machine.
I have followed all the normal steps re enabling addons and active filters etc.
all to no avail Pc is Dell 6 months old, Flashplayer has never worked on this machine. Last MS update mid Dec 2014.
Version of flashplayer is 15....03.......

Flash Player is a built-in component of Internet Explorer. There's nothing separate to download or install.
Firefox requires a different version of Flash Player (the NPAPI plug-in), which will be served to you if you go here: http://get.adobe.com/flashplayer using Firefox; however, there are some unique stability issues related to Firefox on Win8.1, and you're probably better off using Google Chrome if you want a more optimal experience with Flash Player.
For problems where IE isn't being detected by sites that require Flash:
First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11

Tecra M4: TV s-video out does not work with Vista

Similar Messages

Maybe you are looking for