Tecra M5 - Annoying popup messages when fails automatic BT connection to headphones

Hi,
I've been using my Sony Bluetooth headphones at work with my Tecra M5 notebook lately and there's an annoying bunch of message that keeps popping up.
In the bluetooth settings, I've ticked the 'Automatic connection function will be validated' checkbox. This causes the headphones to connect automatically and it works a treat.
But, when I bring my laptop home I no longer have my headphones with me and roughly every 5 minutes my laptop keep displaying these annoying popup messages in the bottom right corner of my screen saying the 'automatic connection failed, please ensure your bluetooth device is powered up etc...'.
Sometimes it gives me a prompt in the bottom right corner of the screen asking me if i'd like to disable the 'automatic connection' feature for the headphones.
Is it possible to disable these annoying popup messages when my headphones aren't detected, without having to disable the 'automatic connection' option? I'd still like to leave the 'automatic connection' feature enabled so when i return to work and turn on my headphones again, it will still connect automatically.
But when I go home, i'd like to still be able to do stuff on my laptop without contstantly being bothered by these popup messsages. If there's some sort of registry setting or something to turn them off, that'd be great.
I've downloaded and installed the Blueooth Stack & Driver Version 6.40
Cheers

Toshiba provided me a beta version of the next Bluetooth stack. It has the option which you are looking for. Just disable the setting in
"Bluetooth Settings->Bluetooth->Options->Audio ->Display message when device is connected."
So just wait until this version is avaiable for download.

Similar Messages

I used to be able to email photos from my Lightroom software quite successfully. I needed to change my password several days ago in my gmail account. Now when I try to email photos I receive a message saying "Failed to establish connection with the outgoi

I used to be able to email photos from my Lightroom software 5.7 for MAC quite successfully. I needed to change my password several days ago in my gmail account. Now when I try to email photos I receive a message saying "Failed to establish connection with the outgoing email server. Please make sure you have entered the email account and password correctly."
I have been trying to get help from Adobe for 3 days. I have sent a message through "Get Support", 2 days ago, but no one has contacted me. I have tried by phone, but no one will help me. When I purchased Lightroom in May, 2014, I was able to receive phone help. I am now told that I don't qualify because I am not a Creative Cloud customer. I have been assigned a case number 186291729.
PLEASE HELP ME FIX THIS PROBLEM

I, too, have this problem. I see no one is responding with a solution? Hello? Can someone please advise?
Oh, and, yes, I have manually verified repeatedly that the information I gave to Lightroom is correct, and I still get the same error message when I try to validate.

A popup message when i double click a packagebody

hi,
i get a problem when i use the sqldeveloper 3.0, usually when i double click a packagebody and there will be a popup message: the connection is busy.try again?
is it the expected alert? Thanks.

I tried several databases, and fail to reproduce the problem.
BTW, single clicking onto object in navigator (being it package, or body) should do it.

Annoying PopUp Messages

I have a Hp Photosmart Premium C410a and when a ink cartridge runs low I keep getting (up to 50 at a time now) popup messages telling me that the ink is low and to replace it as soon as possible. There's a check box I click every time saying not to show this message in the future but I keep getting the messages. How can I make these messages stop?
Thanks
This question was solved.
View Solution.

My problem got solved the hard way: kept the printer, got a new conputer and latest Win8.1 operating system. No more pop-ups.

I want popup Message when i successfully update the data

Hi Expert
My requirment is update the data in the database using Bapi.I successfully update the data in the database.when i successfully update the data it will show the popup message.whether is it possible please tell me how to do it..urgent.
Regards
Sundaresan

Hi SUNDARESAN BALARAMAN,
Given link explains the steps to develop the Pop up iView in Visual Composer.
http://help.sap.com/saphelp_nw2004s/helpdata/en/9c/ffdb4269b2f340e10000000a1550b0/frameset.htm
Please have a look.
Regards,
Prashant.
Please do rewards points for useful answers.
Edited by: Prashant Jagdale on Jan 23, 2008 5:48 AM
Edited by: Prashant Jagdale on Jan 23, 2008 5:50 AM

IOS 7 Annoying Popup Message

Need help here.
My iOS 7 on my iPad 3 always keeps showing this annoying popup window to "Connect to iTunes to Use Push Notifications" for all non-Apple apps I have. My settings have already preset to have push notifications for all my apps. So is this a bug or something? Looks like it.
Sometimes this popup keeps appearing persistently even after u close the previous one. So yea.

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

How to popup message when delete any items inside ME22N Screen?

Hi anybody,
I want Display Error Messages when user click "DELETE ICON" inside ME22N Screen.
Is there any user exit or BADI?
Anybody please tell me how to do?
Thanks
Regards,
S.Muthu.

Hi,
You should be able to use one of the includes in SMOD MM06E005 for this. We have e.g. used ZXM06U4 for multiple error messages even if this is not the core purpose of the include. You need to check out the different includes to find which suit your purpose best - i.e. is called at the right time. You can probably not find one that is called when the delete icon is pressed, but at least on that will prevent saving.

Hi - a new and confusing message when I try to connect my iphone with itunes on my laptop: "this iphone cannot be used because the Apple Mobile Device Service is not started". Any idea of my way out of this cul-de-sac?? Brian

Hi, I'm getting a new and confusing message when I connect my Ipad/phone to my laptop: "This iphone cannot be used because the Apple Mobile Device Service is not started" ... any idea, anyone, how I get out of this cul-de-sac. Brian

try this http://melchoi.wordpress.com/tag/this-iphone-cannot-be-used-because-the-apple-mo bile-device-service-is-not-started/
Hope it's gonna help

Error message when i try to connect to SharePoint Store, when i click on Sharepoint Store in the site its throwing me below error message,

Error message "Sorry, we can't seem to connect to the SharePoint Store. Try again in a bit."
when i try to connect to SharePoint Store, when i click on Sharepoint Store in the site its throwing me above error message,
In the log it shows
Request to office.com with the following URL:https://hostname/sites/appcatalog/config15 caused an exception.
System.Net.WebException:
Request to office.com should be routed with url URL:http://office.microsoft.com/client/15/commerce/query but
request to office.com is sent with following URL:https://hostname/sites/appcatalog/config15
and the Response from office.com was null or its HTTP status code was not 'OK'. Actual status code: 'InternalServerError'
An exception was thrown while running task 'GetOfficeMarkets'. Microsoft.SharePoint.SPException: Sorry, we can't seem to connect to the SharePoint Store. Try again in a bit.
Feature "Apps that require accessible internet facing endpoints" activated in the Central Admin .
kindly help on this issue

Hi,
For a better troubleshooting, I suggest to do as follows:
1. Check whether the App management shared service add to the Farm, and we need to configure the Subscriptions setting service also.
2. SharePoint Server IP Address excluded from the Websense.
3. Restart the server.
4. Please check as the link below.
http://www.naumanahmed.com/2012/07/sharepoint-2013-app-management-service.html
More information:
http://msdn.microsoft.com/en-us/library/fp179919.aspx
Best Regards
Dennis Guo
TechNet Community Support

Ipad Locked(forgotten passcode) and error message when I try to connect to itunes

Ok so I've forgotten my passcode to my Ipad. I have tried too many times so now the screen says Connect to itunes. When I try to connect it there is a error message saying: Cannot connect to itunes becuase it is locked with a passcode. I have never used this itunes computer with my ipad so I haven't synced or anything. Is there anything I can do to unlock my IPad? Thanks in advance.

If you can't remember the Passcode, you need to restore the device from the computer it was last synced with.
Follow the instructions for putting the device in recovery mode > iPhone and iPod touch: Unable to update or restore

Popup message when rolling over a form button?

Is there any way to setup a message to 'popup' when the user moves their mouse over a portal form button? I'd like to put a helpful message there while keeping the label on the button small.

Hi Bryan,
It may be possible to cheat and put this onto the button:
the option that you want is called TITLE.
if you set one of the other parameters (e.g. the label)
to be:
LABEL_TEXT" TITLE="TITLE_TEXT
basically when it adds the text onto the form it will wrap it in "
If it doesn't strip out the " from your text you should get your extra parameter.
it may slip past the portal checking.
I can't test it as I only have WebDB, but I have done something similar with javascript in WebDB.
good luck
Michael

Display Popup/message when refresh/close browser window

Hi all,
In normal ABAP programing when we exit from any transaction, a popup display with text "Are you sure to exit". I have some doubt to get this functionality in WDA.
I am calling a popup in WDDOEXIT method of the Comp controller and when I do refresh/close the application, this method will triggered, but it does not opens a popup as the application relaod.
Is there any way to get this functionality?
I have also checked the thread [ABAP WebDynPro Refresh (F5) issue|ABAP WebDynPro Refresh (F5) issue;.

>
SANKET SETHI wrote:
> Thanks for the reply. I have already checked this help page. Is there something in WDA iteself?
Short answer - no. Only the work proctect functionaltiy that can be used in the portal or the NetWeaver Business Client. By the time WDDOEXIT fires, it is too late to produce any rendering output or stop the browser from closing.

Annoying popup message

My Iphone keeps saying "This accessory is not optimized for this Iphone. This is the second time I've had this problem. I took it in to a store and the store manager came up with silly excuses and then erased everything off my phone to get the message off. Well, it's back--now what? What accessory is it referring to? There is nothing connected to the phone.

lisandron wrote:
My Iphone keeps saying "This accessory is not optimized for this Iphone. This is the second time I've had this problem. I took it in to a store and the store manager came up with silly excuses and then erased everything off my phone to get the message off. Well, it's back--now what? What accessory is it referring to? There is nothing connected to the phone.
I don't know if this will help but I came across this in one of the forums that I visited. The issue appears to be caused by dirt or water in the dock port which confuses the iPhone’s device detection via currents on the pins of the dock port.
So heres some possible fixes
1. Look in the dock port and remove any dirt, lint.. etc anything that shouldn’t be there. You may want to use an air duster to blow it out.
2. If it got wet or was near a water source when the error started appearing, try burying it in rice to dry out the moisture and hope that it has not caused any permanent damage.
3. If you get this error only when connected to your iPhone dock or cable, check the peripheral. Test on the dock or cable with another iPhone.
If it still doesn’t work, you may have damaged the pins, possibly with moisture. You need to seek professional help.

I get a "Connection Failed" message when I try to connect to a Windows 7 computer that I was able to connect to before.

I was able to connect to this Windows 7 computer before, I don't think anything happened, and then suddenly I couldn't. I turned the firewall off and enabled everything that I could for sharing on the PC. I can connect to the other PC on the network fine. I have tried using the connect to server and all of the different ways to enter the address in. When I ping the PC all of the responses are completely normal. I'm on OS X 10.8.3 and the PC I'm connecting to is Windows 7 Ultimate x64 SP1. If you need any more details I'll try to provide them, that's all I can think of right now.

I called Apple today... It turned out to be my modem/router.

Popup message when closing tabs

How can I turn off the message that says the following...
Are you sure you want to close this tab?
You have entered text on "site name". If you close the tab, your changes will be lost. Do you want to close the tab anyway?
...whenever I close a tab in which I entered text?
Message was edited by: computerwiz908

Safari Preferences - Tabs - deselect "Confirm before closing multiple tabs or windows"
Regards

Tecra M5 - Annoying popup messages when fails automatic BT connection to headphones

Similar Messages

Maybe you are looking for