Tecra M5 hangs during the shutdown process

Thanks to those to responded to my query. With your advice, I've now uninstalled Norton Ghost - and the problem has gone away, my machine now shuts down, goes into standy and hibernates correctly and wakes up again correctly. The next question to be investigated is why this should happen with Ghost and this is something I intend to take up with Norton. If I come up with answer, I'll post again. Cheers

I have also installed the Norton Ghost on my notebook but I have never had any problems with the shut downs.
I think the Ghost was started always while the Windows was booted up and the ghost was running in the background.
This could be disabled in the registry.
I have removed the ghost registry entry in Hkey current machine software Microsoft windows current version - run

Similar Messages

  • PLEASE HELP ! While updating My Xperia Z1 , my pc hanged during the process and .

    While updating My Xperia Z1 , my pc hanged during the process ( so , installation of update was interrupted , guess it's same as getting your USB connection disconnected )and now the phone won't turn on .
    Its shows the Sony Xperia logo , then shows a black lit screen , and that's it , nothing else happens . I can only turn it off by pressing and holding the power+up volume button , but it turns on automatically if plugged in for charging or in PC only till it gets that black screen .
    I tried to flash it with a flashtool (Emma) , but it says phone locked , but since it can't even be turned on , i can't unlock it .
    It's a store bought phone and is not of any contracts with any mobile service provider or anything like that ....
    Funny you know ... my PC had to crash at the moment i was updating it .... my luck ....
    Anyways , now please can anyone tell me what i can do ? I'm sure there is a way i can fix it using my pc and other downloadable software , so please can some one help me how i can fix this problem ? I don't care if i lose all the data on it , i just want my phone back ....
    Solved!
    Go to Solution.

    Problem Solved ,Thank you  very much !! 
    For those who might face the problem and stumble upon this thread after googling  
    Read above mentioned comments 
    Now here's what I did :
    Turned the phone off by power+volume key method , then plugged it in to the pc via USB and opened sony pc companion , entered Support zone , then entered the Update device option , then I Unplugged my device , only after doing this a window pops up with  Repair my phone/tablet in blue text , then i clicked on that and followed the simple instructions ..
    It's basically what Thommo said , only i was so freaked out at that time that i failed to follow his instructions to the letter  
    So now my phone is back to normal , and , it got the latest lolipop update !
    Problem solved i guess  but Thommo , i need to disturb you again with  just one more  question ,  since at the very beginning , the update process was interrupted , and now i got lolipop after  the repair ,without needing to update again ,  so has the lollipop been installed properly on my phone or do i need to use any other flashtool to re-install lollipop ? 
    again , Thank you ... 

  • WebLogic hangs around after shutdown process appears to complete - Message Driven Bean related

    On my current project we have some Ant scripts that automatically
    start and stop WebLogic. The stop script equates to (not exactly but
    close enough):
    java weblogic.Admin -url localhost:8001 -password password -username
    username SHUTDOWN
    WebLogic is start and shutdown for each system module. All modules
    use the exact same script for these two actions. Some of the modules
    use Message Driven Beans and consequently, since these use JMS, a
    JMSxxx.dat file is generated in the jms_store directory. As part of
    the cleanup process the jms_store directory and all files in it are to
    be deleted AFTER WebLogic shuts down.
    The shutdown process works fine in all cases where JMS is not used and
    in all cases where JMS IS used but there are NO message driven beans.
    However, when there is a message driven bean the server does not shut
    down in a timely manner, sometimes not at all (no error messages are
    produced), and the JMSxx.dat file
    remains locked. Consequently, all of the tests run via the ant script
    for modules come to a grinding halt (i.e. environment could not be
    cleaned so further tests would be skewed).
    Can anyone shed some light on a definitive order of events during
    WebLogic's shutdown process? What is the best way to test for the
    server being up? I know there is a ping utility for weblogic - should
    this be used or should a connection to a JNDI or JMS listening port do
    the trick? Any other ideas would be welcome.
    Thanks in advance,
    Mark

    On my current project we have some Ant scripts that automatically
    start and stop WebLogic. The stop script equates to (not exactly but
    close enough):
    java weblogic.Admin -url localhost:8001 -password password -username
    username SHUTDOWN
    WebLogic is start and shutdown for each system module. All modules
    use the exact same script for these two actions. Some of the modules
    use Message Driven Beans and consequently, since these use JMS, a
    JMSxxx.dat file is generated in the jms_store directory. As part of
    the cleanup process the jms_store directory and all files in it are to
    be deleted AFTER WebLogic shuts down.
    The shutdown process works fine in all cases where JMS is not used and
    in all cases where JMS IS used but there are NO message driven beans.
    However, when there is a message driven bean the server does not shut
    down in a timely manner, sometimes not at all (no error messages are
    produced), and the JMSxx.dat file
    remains locked. Consequently, all of the tests run via the ant script
    for modules come to a grinding halt (i.e. environment could not be
    cleaned so further tests would be skewed).
    Can anyone shed some light on a definitive order of events during
    WebLogic's shutdown process? What is the best way to test for the
    server being up? I know there is a ping utility for weblogic - should
    this be used or should a connection to a JNDI or JMS listening port do
    the trick? Any other ideas would be welcome.
    Thanks in advance,
    Mark

  • Idvd5.01 Errors were found during the burning process (Burned Finished)

    I've never had this problem before, but i'm trying to burn a dvd after all the media and dvd are ready for burning and when I click on the burn icon the following message pops up: Errors were found during the burning process. I've check to make sure nothing is hanging outside the title safe area. Any suggestion to why I'm getting this error.

    Hello, Oscar,
    This message can mean several things.
    First, are you burning an iMovie or a slideshow or both?
    Do you have chapter markers in your movie? Are they on or withing 2 seconds of any transition or at the beginning of your movie?
    Does everything encode properly?
    Are you able to 'save as disk image'?
    Post back with some more details about your project.

  • Problem: An error occured during the uploading process.

    Hello!  I've searched around but I am having difficulty finding a solution to this problem.
    I am trying to upload videos through Adobe Premiere Elements 9 to YouTube, using the preset options in the share tab.  This worked previously without issue, but then one day I continually ran into an error stating "Sorry, an error occured during the uploading process.  Please try again later."  However, it eventually started working.  It is now a few weeks later, and I am having the very same issue.  I am unable to upload to YouTube or any other service through the Share tab.  Even loading the software itself, the opening splash screen is unable to grab my Adobe ID.  It never stops "Gathering User Info..."
    Steps I have tried:
    Going to Edit -> Preferences -> Web Sharing and hitting the refresh button to update settings.
    Checked router settings.
    Enabled DMZ on router and linked it to this specific computer.
    Rebooted PC and router, and tried updating the Web Sharing settings multiple times.
    I honestly do not believe it to be a router issue, especially since it is currently in DMZ mode and I have had absolutely no trouble with any other software.  This has continued to baffle me though, and finding help is difficult.  Searches keep giving me encoding settings for YouTube videos, and few results pertain to this particular issue.
    I am aware I could export the video normally and upload through YouTube that way, but on DSL, my upload speed is pretty terrible for a high quality video.  The YouTube HD setting has been great for me in the past, as files are small but still look great online.  I would really like to get it working again, both for ease and convenience for simple projects.
    If anyone has any ideas as to what could be causing a problem, I would be greatly appreciative of any advice.  In regards to the project itself, there is no real editing being done at this point, as I am trying to eliminate any possibility of error elsewhere. I opened a new project, added a video clip and went directly to upload it, resulting in the error above.
    I don't believe it matters in this situation, but just in case:
    Windows 7
    AMD Phenom II X4 820 - 2.80 GHz
    6 GB RAM
    Radeon HD 5880 1GB
    Connecting through a Netgear WNDR3400 router, standard DSL connection.

    Sorry, not seeing where to edit my original post.
    Just wanted to add, that I am able to visit both the Photoshop.com website, as well as YouTube through my browser.  So I am not being blocked somehow to those particular sites.  It only seems to be through the software that I cannot connect to any of the online services to upload videos to.
    Additionally, the only virus software running is Microsoft Security Essentials.  It has never raised a flag before with this software or caused interference in the past.  I do not use Norton or any other service which are known to interfere with programs often.
    Just a quick example as well, pinging Photoshop.com through the command prompt shows I am getting through just fine.  As you can see in this image though, it cannot seem to ever connect and grab my user information.
    http://i.imgur.com/S53xN.png

  • After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

    After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
    Tried to run firefox.exe -P but receive error message:
    XML Parsing error: undefined entity
    Location: chrome://mozapps/content/profile/profileSelection.xul
    Line number 18, Column 1:
    <dialog
    ^
    Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

    Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
    Thank you very much again.
    Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
    In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

  • There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

    There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

    Nah - that's just the normal boot process.
    Clinton

  • How do I solve this Nano 3G syncing problem?  During the syncing process my music files are registering as audio, but once I eject the IPOD it does not reveal the music files in the music folder.

    During the syncing process my IPOD Nano 3G shows that the music files that I'm synching are registering as audio, and that the video files are registering as video, and even upon completion they are still labeled as such.  But, when I eject the device from ITUNES and turn it on, the IPOD reveals that there are no music or video files to be played.  When I plug the device back into my MAC and, when ITUNES recognizes the device, uder the summary tab the summary bar reads that the files that I loaded are all classified as other files.  What could be causing this?  I had to re-install my Tiger Software, and since then I've been having this problem.

    was this ever addressed

  • Batch Traceability for Sugar as raw material during the production process

    Dear Colleague ,
    I need your support for a traceability issue in a customer on beverage sector
    See the case below:
    Batch Traceability for Sugar as raw material during the production process
    In AMSB the batch traceability in some production processes is very difficult, especially in case of sugar where tanks wherein more than one batches of the same material can be mixed. For example, in a single day almost 17-20 batches of the same material can be mixed and as the result is a composition of water and sugar the normal FIFO rule strategy cannot be applied during the component consumption.
    The raw material (sugar) is received in tank S5 at different points of time, and its content is transferred to tank B1 for storage purposes as well as for mix the sugar with other material such as water.
    At a specific moment the S5 tank contains only a single batch, while the tank B1 contains more than one batch. Tank B1 is used in order to supply the production line and the corresponding material consumption is triggered in backflush as soon as the production activity is declared (production confirmation). Along with the material consumption the batch determination takes place and a complex algorithm is applied: at a very high level, the single batch is consumed depending on its percentage inside the mix of composition and in case the this
    percentage is under a threshold level the current batch should be full used in order to avoid that it will exist for ever.
    Moreover, the good movement reversal (reversal of material consumption) and its correction lead to a complete new calculation of all the batches consumed after the original movement date/time. This means that the algorithm for batch determination should be reapplied for all the consumptions subsequent to the original movement.
    On the other hand it’s not possible to identify the mix of batches at the exit point of silos B1 because the total consumption of the material in the tank will never happen. As long as the tank level decreases it will be filled up from the tank used for receiving of sugar (S5).
    As requirement AMSB needs to post the material consumption starting from EWM, this means that EWM should be the master system in this case and the correspondingmovements have to be  transferred to ECC afterwards. This mainly because EWM  should guarantee the business continuity in case the ERP system is not available.
    AMSB asked if the scenario depicted has been implemented in some customer, in EWM system or in any other SAP solution.

    Hi ,
    At the time of consumption you can put ' * ' aestrix sign in the batch field.
    You will get list of batches of that material.select ur batch and consume the quantity.
    Regards
    Piyush

  • What is the keyboard shortcut to lighten images during the editing process?

    What is the keyboard shortcut to lighten images during the editing process?

    I have no idea what you mean. You need to explain better.
    Mylenium

  • HT201413 I keep error 9 when i try to restore my Ipod 5.It seems to be that my device disconnects during the restore process, then error messege pops up. I have updated the security settings on my pc and it still doesn't work.

    Error 9 pops up when trying to restore Ipod 5. The problem seems to be that my ipod disconnects during the restore process. My ipod is stuck in restore mode so I can't access its update serever. I have already updated my pc and its security settings. Is there anything else i can try?

    Hello AS234,
    This error is typically indicative of a conflict with installed security software.
    Configure your security software
    Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
    Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/TS3694
    Cheers,
    Allen

  • Application error occurred during the request procession.

    Hi all
    i am geeting this error when i am ruuning my JSP page through NWDS.
    Application error occurred during the request procession.
      Details:     com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException:
      Error compiling [/InvokeProxy.jsp] of alias [ProxySenderWeb] of J2EE application [sap.com/Refrence].
    Exception id: [001279D06B4E00C6000027C700002DFC000445047AAE5AD8]
    Thanks in advance

    Dear Kunnal,
    Please share your solution with the community.
    Thank you.

  • An error occurred during the submit process. Unknown failure

    in forms central, when i submit a form via reader v11 the error An error occurred during the submit process. Unknown failure. The form can be submitted with adobe professional 11.

    Hi,
    would you please describe the error message or  insert a image to here? and if you can share your pdf form to me, that's would be very help us to reproduce and resove the issue. my email: [email protected]
    Thanks,
    Guanshuai

  • An error occurred during the installation process: error occurred while installing additional adobe

    I get this message: An error occurred during the installation process: error occurred while installing additional adobe packages. when trying to install CS2 InDesign UPGRADE from id 2 on new IMAC 2.4 GHz 4 GB. 

Any one else with same issue? 

Trevor

    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

  • Error: "Application error occurred during the request processing

    Hello,
    I have successfully installed NW7 CE with MaxDB database. Then trying to logon to NWA/User Admin etc, & couldn't logon. Getting the following error.
    I am using Internet exploreer 7
      500   Internal Server Error
      SAP NetWeaver Application Server 7.11 / AS Java 7.11 
      Error: "Application error occurred during the request processing."
      Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jsts/home
    Details: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to retrieve client for current request. Causing exception is  nested.
         at com.sap.tc.webdynpro.clientserver.task.Task.getClient(Task.java:493)
         at com.sap.tc.webdynpro.serverimpl.wdc.um.ClientUserFactory.checkAuthentication(ClientUserFactory.java:200)
         at com.sap.tc.webdynpro.serverimpl.core.um.AbstractClientUserFactory$1.checkAuthentication(AbstractClientUserFactory.java:151)
         at com.sap.tc.webdynpro.services.sal.um.api.WDClientUser.checkAuthentication(WDClientUser.java:214)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.checkAuthentication(RequestManager.java:713)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:237)
         at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToRequestManager(AbstractExecutionContextDispatcher.java:202)
         at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForRequestManager.doService(DispatchHandlerForRequestManager.java:38)
         at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:127)
         at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:95)
         at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToRequestManager(ExecutionContextDispatcher.java:140)
         at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:92)
         at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:104)
         at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doContent(AbstractDispatcherServlet.java:87)
         at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doGet(AbstractDispatcherServlet.java:54)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140)
         at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:466)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:291)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385)
         at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:76)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:240)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78)
         at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
         at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
         at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
         at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43)
         at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
         at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:425)
         at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:250)
         at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:109)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
    Caused by: com.sap.tc.webdynpro.services.cal.core.exceptions.WDClientException: Found no client: clientNameReqParam=null, clientNameAppParam=null, useragent=Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.2; Trident/4.0; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
         at com.sap.tc.webdynpro.clientserver.cal.ClientInspector.findClientContainer(ClientInspector.java:212)
         at com.sap.tc.webdynpro.clientserver.cal.ClientInspector.getClient(ClientInspector.java:104)
         at com.sap.tc.webdynpro.clientserver.task.Task.getClient(Task.java:491)
         ... 51 more
    Checked hostname resolution, check any network issues...everything looks good. Suggest a solution.

    It's a problem with the browser.
    Please try the following possiblities:
    - use a different browser or at least a different IE-Version
    - restart the problems (helped me several times)
    - try comptability view in IE
    Regards
    Adrian

Maybe you are looking for