Tecra M5 (PTM51E) and inability to install Vista x86 Quadro Graphics driver

Can anyone help a newbie to this forum with a little problem I have on Vista Business Build 6000?
I am trying to install the vista driver from the NVIDIA site for the NVIDIA® Quadro® NVS 110M card.
http://www.nvidia.co.uk/object/winvista_x86_97.46_uk.html
I have seen that this card is not highlighted in the covered list, but the XP/2000 driver from the Toshiba site does not help either.
I have ensured that any previous NVIDIA driver is uninstalled and disabled any/all AV software on the machine, however when I run the exe I get an NVIDIA Setup Error:-
Setup detected that the OS in use is not Windows Vista... etc
I have also ensured that all "Download Accelerator" utilities were disabled when I downloaded the files.
Any help will be useful and if it is a simple fix I will be happy to commit seppuku in embarrassment.
Thanks
This is so I can get the AERO facility up and running as the card is 128 MB and should be suitable to run this.

Hi
First off all I would like to say something about the Aero feature.
Microsoft recommends the following minimum hardware to run Windows Vista Aero:
1 GHz 32-bit (x86) or 64-bit (x64) processor
1 GB (1 gigabyte) of memory
graphics processor with minimum of 128 MB graphics memory, which supports DirectX 9, with a Windows Display Driver Model driver, Pixel Shader 2.0 in hardware, and 32 bits per pixel
The color quality in the display properties must be set to "Highest (32 bit)"
Please visit the Microsoft page a read the article: How do I get Windows Aero?
http://windowshelp.microsoft.com/Windows/en-US/Help/c33fe91a-9e6f-41f4-ae82-3ed2d5fa2fbf1033.mspx
I have no experience with Nvidia Vista drivers but with drivers for WinXP and usually its not possible to install and to use the original graphic drivers from the graphic card manufacture site.
I think you will need to install the Toshiba drivers. If you did not find any at this time that I assume you have to wait. ;(

Similar Messages

I have an early 2008 Mac Pro and want to install a 3TB internal hard drive. Is this compatible? The manual indicates 1 TB per bay, but I have already installed two 2 TB hard drives in two other bays, and have had no problems. Any suggestions?

I have an early 2008 Mac Pro and want to install a 3TB internal hard drive. Is this compatible? The manual indicates 1 TB per bay, but I have already installed two 2 TB hard drives in two other bays, and have had no problems. Any suggestions?

RE: SATA Bus speed:
Typical Rotating drives available today, whatever their SATA spec, can source data off the spinning platters no faster than about 125MBytes/sec.
SATA 3 is rated at 6G bits/sec, which theoretically is about 750 Mega Bytes/sec
SATA 2 is rated at 3G bits/sec, which is theoretically about 375 Mega Bytes/sec
SATA 1 is rated at 1.5G bits/sec, which is theoretically about 187.5 Meg Bytes/sec
None of the SATA Busses is a bottleneck for consumer Rotating drives you can buy today. Trying to speed up the SATA Bus will not provide any real-world performance increases for Rotating Drives.
https://discussions.apple.com/message/22690384

Does mountain lion comes with graphic, Does mountain lion comes with graphi, Does mountain lion comes with graphic driver updates? I'm currently using snow leopard, and it seems that there's no graphic driver updates for a really long time.

Need some advice

I'm currently using snow leopard, and it seems that there's no graphic driver updates for a really long time.
Snow Leopard is no longer being updated, 10.6.8, was the last update. So, a "really long time," will be forever.
Yes, ML has graphic driver updates, but since there is no way to guess whether it impacts your unmentioned hardware, there is no way your question can be answered.

What packages to install, and how to install in an USB hard drive

Hello.
Well, as I said in another thread, I want to install in an USB hard drive. But I don't know how, because it hasn't graphical installer, but text installer. I tried in a virtual machine, and it was fine, but when I want to start it, an error appears, "Was not found a bootable system" or something. Maybe a VM is not as a computer, but... well. I didn't change anything while I was installing GRUB, and I know that I've to install it in /dev/sdb.
And I want to know too, what packages to install and what packages don't (the ones which are neither "base" nor "base-devel"). But I'll install sudo, links and ndiswrapper (for wifi).
Thanks, and excuse me if my English is bad.

Gotta use the wiki my friend and this one is even translated into Spanish:
https://wiki.archlinux.org/index.php/In … C3%B1ol%29
As to your question about which packages you'll need beyond those in base and base-devel - that depends on what you want on your system... no one can answer that but you!
Welcome to Arch.
Last edited by graysky (2011-01-01 19:50:46)

Installing Vista after replacing hard drive in a Toshiba Satellite L45-57423

The hard drive in my old Toshiba laptop went bad and had to be replaced. I no longer have (and am unsure I ever had) the Windows recovery disk. Do I need to purchase a new Windows Vista recovery disk for this computer or is it better to buy a Windows Installation disk?

One post is sufficient. See my reply.
-Jerry

Drawing artifacts in Firefox and Thunderbird after installing MSI AMD R6850 graphics card

After installing new graphics card (MSI R6850 CYCLONE 1GD5 PE/OC), latest drivers on WinXP 32bit, I'm experiencing frequent drawing artifacts with Mozilla Firefox 8.0 and Mozilla Thunderbird 8.0. The problem represents itself either as horizontal black stripes or scattered color checker pattern. It happens especially when switching from other application to Firefox or Thunderbird or when swiching from child window (like Download Manager) to Firefox. It affects either whole application or just some rectangular region (clearly region which was redrawn due to application switching). Next repaint (like switch between Firefox tabs) usually fixes the problem. It is just visual issue, behavior is not affected. The problem never happened to any other application till now. Any ideas? Anyone experienced same problem? Thanks in advance.
Zbynek
P.S. Here are the screenshots for both problems:
http://astrofoto.euweb.cz/tmp/black_stripes.jpg
http://astrofoto.euweb.cz/tmp/color_boxes.jpg

Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver that fixes these problems.

New HDD in HP HSTNN-F05C and can't install OS due to missing driver

Hello,
I've replaced the HDD in my HP HSTNN-F05C netbook.
The I've copied Win8 and later Win7, both, 64 and 32 Bit versions on a bootable USB stick.
All starts well, the installation starts, asks for the language and goes on.
Some seconds later, the installer asks for a missing CD, DVD or HDD driver.
As tehre are no optical drivers I assume it's a HDD driver.
There are no CDs otd DVDs around and I can't find the missing drivers on the HP downloads.
Can anybody please point me to the downlod of the missing dirvers?
Regards,
Marc

Hi Marc,
If you visit this page and enter your product name or number, you should be able to reach your drivers.
Please let me know if this helps.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Equium P300-19O - How to install the newest Intel graphic driver

same problem as this guy ( http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=36626&tstart=0 )
tryed never display drivers from intel and for other laptops but none will install via the main exe file or through device manager.
if any one knows of a newer driver that works then a link would be helpfull.
thanks

i found the only way to update the driver is to go into the device manerger and right click the intel 965 and click uninstall.
once uinstalled i restarted the laptop then went back to the device manager to update the driver from the folder i downloaded and extracted the new driver from.
http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=2800&OS FullName=Windows+Vista*+Home+Premium%2C+32-bit+version&lang=eng&strOSs=153&submit=Go%21
(above is for vista 32bit premium)
you want to download the zip file intended for use by Developers so all the bits are already extracted for it to update as the exe version wouldn't work for me.
HTH
mark

Trying to install vista 64 on a separate internal drive with boot camp

running into a wall here,
I'm able to install vista x64 when I divide an internal OS X drive that works fine, but I want to load Vista on it's own entire internal disk (bay 4). Bays 1,2, and 3 I use for OS X they are all 1TB drives. When I go through the boot camp assistant and divide a disk 50/50 between OSX and Windows and then boot to the vista install disk, the vista setup screen shows a PARTITION as "disk x partition x BOOT CAMP" and it works to select that partition, format and load windows... No problem. However when you choose the option in Boot Camp to erase an entire extra disk (in my case bay 4) and create a single partition for Windows and then boot to the Vista install disk the disk that was erased of the mac formatting, it doesn't show up with "BOOT CAMP" in the name inside the Vista setup screen, nor will it let you install vista to it, even if you pick the right one and format it inside Vista setup.
I've tried removing all internal disks except the one I want to load vista on and booting directly to the vista set up disc, and formatting with windows command line diskpart inside setup too, unsuccessfully. It simply keeps giving me messages that windows cannot be installed on the volume... I changed it from a GPU type disc using the "clean" command in diskpart but it still won't work! Man!!!
How can I get vista loaded on a separate disk on my mac, boot camp or not? It seems silly that a disk must have an OS X partiton on it before windows will load on it... Is there a way to load Vista x64 on it's own dedicated internal disk? Gratitude for any real help, I'm positive I'm not the first guy to want to load vista on it's own disk LOL!

So I figured this out myself, there was some kind of glitch in boot camp, i bypassed it and formatted the disk with the os x disk utility as a fat 32. pulled all the other drives out, and booted to vista setup. it formatted the disk to NTFS and lets me install vista 64 yahhhooooooooooooo!!!!!

Os x in ssd and how to install win8 in previous hdd by bootcamp

I want to remove my optical drive on my macbook pro(101) and replace it with a ssd (80G).
If i move my os x to ssd .Can i install win8 by bootcamp in my previous hdd disk.

From everything I've read, it might be possible, but you will have to do some serious hoop jumping to make it work. To use Boot Camp, you must install on the primary drive in the portable computer, and you must install from the internal optical drive if the system shipped with one. That would mean that you would not be able to have the SSD in the optical bay when you install Windows 8, but it does not mean that you can't install Windows before you put the SSD in the optical bay.
As a side note, depending upon which MacBook Pro model you have, putting an SSD in the optical bay is not a wise choice. Some models have issues with the SATA link negotiation process, and in some models, the drive is "logically disconnected" at random times, which would not be good if you are using the drive as your boot drive.

HT3986 can bootcamp be used with Windows install disk on an external drive (internal is broken) ?

can bootcamp be used with Windows install disk on an external drive (internal is broken) ?

With Boot Camp, you must install Windows onto in internal HDD (or SSD). If you are referring that your internal Optical drive is broken, you might be able to install Windows from an external drive, but you might not. I have heard varying levels of success with that. I'm not sure what the official stance is, but I do know that if youe machine shipped with an internal optical drive, then you must use that to install Windows using Boot Camp and not swap it out for a "data doubler" and try to install from an external optical drive.

Can't install Intel graphics driver on W530

When I try to install Intel's latest graphics driver (so I can run OpenCL apps) it fails with "Operating system not supported". This is on Win7 64-bit, and the drivers are for that OS.
Moderator Note; subject edited on this & further posts; W580 -> W530

davea wrote:
Oops! I meant to type W530, not W580.
So, it looks like I need to uninstall the existing graphics drivers, through the Windows device manager, then install the Intel driver. Is there any danger in doing this? What if my display stops working? Thanks for the help! -- David
I would recommend to uninstall using the add/remove programs and using device manager. Uninstall the driver from device manager will most likely remove just the driver and not the rest. You should find the add/remove programs in the control panel.
I cannot say for sure this will solve the problem, but i had no problems using the drivers from Intel in the past as long as i do not have the driver from Lenovo installed already. So it might be worth a try. There should not be any danger doing so, but of course when you work with a computer anything can happen.
-gan

Tecra M7 DVD: CD/DVD RAM drive does not work since installing Vista

I did a clean installation on my Vista Ready new M7. It had XP tablet to begin with and the DVD drive worked fine. Indeed I used it to install Vista (Home Premium).
Now it does not work at all. It spins but does not read. Device Manager tells me device cannot start. Tried to update driver and it told me that it has the most uptodate driver.
Downloaded all the drivers from Tosh download centre for Vista upgrade of M7 (which got bluetooth, screen rotation etc to work fine). But none of the downloads seemed to be a driver for the DVD-Ram drive. Can not find a driver anywhere else (including Panasonic site).
DVD drive is Mat****a DVD-RAM UJ-841s
Any suggestions?

Hi
On the Toshiba driver page you can find the DLA for Tecra m7.
Did you try to install the XP DVD-RAM driver from the Toshiba page on the Vista OS?
Maybe it will works
But listen the CD/DVD drive uses the common Microsoft drivers which are included into Vista or XP.
Therefore an additional driver should be not needed!
One additional proposal;
Remove the CD/DVD drive from the device manager and reboot the notebook.
After new reboot the OS should install the drive again and should renew the software.
Other hint:
- Start the registry
- Choose the registry key;
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
- In the right pane, right-click UpperFilters and LowerFilters then click Delete.
- and restart the notebook

Forms 10g installed and running on Windows Vista

Update 12-Dec-2008: Oracle has published NOTE 559067.1 -- How to Install Developer Suite 10.1.2.0.2 - hence 10.1.2.3 - on Windows Vista, 24-OCT-2008 with some installation help.
Update 07-July-2008: Added text at the bottom showing how to find patchsets for Forms 10g.
Update 29-May-2008: This thread was started in November, 2007. In January, 2008, Oracle released Patch 3 for Forms 10g, which makes Forms 10g compatible with Windows Vista. As time permits I'll try to keep the information in this post up to date. Updated information will be inserted as blue text.

Original message begins here:
This is a second thread I am posting to outline the steps I have used to install Forms on a Windows Vista Home Basic laptop. The other thread describes installing Forms 6i:
Forms 6i installed and running on Windows Vista
Please read through the initial part of that post for the background. I realize Oracle has not certified Forms 10g to run on Vista, but the time has come for my associates and I to upgrade our old computers to new desktop/laptop platforms, and I would hate to acquire XP machines and be stuck with them for the next 5 years. (Note: Since first posting this message, Oracle has certified Forms 10g Patch 3 (version 10.1.2.3.0) to run on Vista) So after another person informed me that he had Forms installed and running on Vista, I went ahead and bought one. I found that as long as I set the compatibility mode to run Forms programs as Windows XP (and a few other changes), Forms 6i and 10g run quite satisfactorily.
Update 29-Jan-2008: Unfortunately, it turns out that the Forms 10g Builder running on Vista had a major flaw: If you try to develop a form, the Builder will crash if you try to compile a procedure that calls another procedure in the form that has errors. The problem is reported and described in this thread: Error compiling a form under Vista
Update 12-Mar-2008: Installing Patch 3 on Vista does not help with this problem -- the Builder still crashes in the same situation.
Update 25-July-2008: Applying Patch 7047034 has corrected the problem. See this link within this thread: Forms 10g: Installing Patch 7047034 on Windows Vista
Webutil note: I am stuck in a Forms 6i client/server world, so all my forms must run in that environment. Therefore I have not used any Webutil software, and I do not know whether that part will run under Vista.
Internet Explorer note: On Windows Vista, IE CANNOT be used to run the Web Forms runtime. It crashes immediately when you try to run a form. Instead, I can use either Firefox (Firefox 2, Firefox 3.0 Crashes with Forms 10g) or Netscape, as long as they are set to disable java. [ Correction: IE7 on Vista now runs the Forms 10g forms. You just need to add "?config=jpi" to the browser URL when starting the Web Forms session. More IE/Vista info: [url=http://forums.oracle.com/forums/thread.jspa?threadID=642973]Vista JInitiator Problem ]
The Oracle Developer Suite download page:
http://www.oracle.com/technology/software/products/ids/index.html
Oracle Developer Suite Installation Guide:
http://download.oracle.com/docs/cd/B25016_07//doc/dl/core/B16012_04/toc.htm
The steps below are those I followed to install Forms 10g (version 10.1.2.0.2)
I. Preliminary system changes in Windows
When I started installing, I got the following error message: Install has encountered an error while
 attempting to verify your virtual memory settings.
 Please verify that the sum of the initial sizes of
 the paging files is at least 256 MB.To fix this: Go to Control Panel, System and Maintenance, View amount of RAM and processor speed (under "System"),
Advanced system settings (in left "Tasks" column), Advanced tab, Settings (under "performance"), Advanced tab:
Virtual Memory shows a "Total paging file size for all drives: 2337MB.
Click "change", Uncheck "Automatically manage paging file size for all drives"
Click "custom size:", set Initial size to: 2048, Max to 4096
Click set button, then OK, get message:The changes you have made require you to restart your computer before
 they can take effect.Restart the computer.
II. Installing Forms 10g
1. Download two files from Oracle:
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
2a. Before extracting, it is a good idea to shut down any virus protection software. It can sometimes prevent some files from being created.
2b. Extract both into the C:\oracle directory, as disk1 and disk2.
3. Using Windows Explorer, change the properties of setup.exe in the C:\oracle\disk1 folder. (In windows explorer, right click, properties, Compatibility tab.) Change the compatibility to run as Windows XP (Service Pack 2).
4. Right click setup.exe and click "Run as administrator"
5. Select "Installation type" = Complete (1.11 GB)
6. Received this message:Windows Firewall has blocked this program from
accepting incoming network connections. If you
unblock this program, it will be unblocked on all
public networks that you connect to.
C:\users\steve\appdata\local\temp\orainstall...
2007-10-29_11-59-08am\jre\1.4.2\bin\javaw.exeI clicked "Unblock"
7. Received this message: "Provide outgoing mail server information" I entered the smtp mail server that I use.
8. A summary screen displayed showing 274 products under New Installations.
I clicked the Install button.
9. Received this message: You can find a log of this install session at:
C:\Program Files\Oracle\Inventory\logs\installActions2007.....log
10. The installation completed. Installed products shows Forms 10.1.2.0.2
III. After the install completed
1. Create a shortcut to the Forms 10 Builder on the Desktop.
On the shortcut line, after the .exe, add *userid=userxxx/pwxxx@orcl* so Builder automatically logs into 10g database. If you do step 4 below (creating an easily-accessible folder to use for your forms) change the "Start in" path on the shortcut so it points to that folder. Otherwise, Forms Builder will not find referenced objects and PLL libraries when it opens a form. Also do the same on the Start, All Programs shortcut for the Forms Builder.
Edit: After applying Patch 3, the following steps are not necessary.
Set its compatibility to Windows XP.
Set checkbox: "Run this program as as an administrator." (Without this, FormBuilder will NOT open a PLL library.)
Click the "Show settings for all users" and change values there.
2. Copy "Start OC4J Instance" icon to desktop.
Set its compatibility to Windows XP.
The first time it runs, I got a Windows popup to unblock program named Java. I clicked "Unblock".
3. tnsnames.ora:
Rename C:\oracle\DevSuiteHome_1\network\admin\tnsnames.ora
to: tnsnames_orig.ora
If you created a tnsnames.ora file for Forms 6i, just copy it to the path above. If not, do this:
Create a new tnsnames.ora file, copying entries old file on my old laptop, which contains all the connections I use.
Delete the old laptop entry, replace with new entry for the new local ORCL connection on new laptop from tnsnames file renamed from the c:\oracle\... ...\10.2.0\db_1\ path.
4. Optional: Create an easily accessible folder to store fmb files:
C:\users\steve\.1\fmb10
You don't really want to keep drilling into C:\oracle\DevSuiteHome_1\forms, and then find your .fmb file among the several dozen oracle-supplied files.
To create a folder named .1, you have to open a CMD.exe (Windows DOS) window, and type the Make Directory command:
MD .1
That will create the folder within the current directory -- mine defaults to C:\users\steve
Note: If you also need to use Forms 6i like me, DO NOT EVER open a .fmb file in the Forms 10 Builder from the Forms 6i folder. If you compile it, or even worse, save the .fmb, Forms 6i *cannot ever* access the file. Instead, always use the File Manager (Windows Explorer) to copy the fmb from the fmb6 folder into the fmb10 location.
5. Change the Forms 10g Default.env file using a text editor.
This file replaces all the settings originally written to the Windows Registry (GREAT idea, Oracle! I hate the registry.) No more Regedit. The default.env file is located at: (DevSuiteHome_1 path)\forms\server\default.env
Locate line with: FORMS_PATH= and add:
;C:\users\steve\.1\fmb10
Add a new line:
FORMS_MMAP=FALSE
The above allows compiling an fmx while the form is running.
Add a new line:
FORMS_ROWLOCK_OPTIMIZATION=FALSE
(This fixes Oracle bug number 3949854, which prevents automatic skipping if the same value is typed over another value. TAR 4806199.993 Automatic Skip failure...) See bug 4068896
Add a new Line:
FORMS_RESTRICT_ENTER_QUERY=False
This allows use of Query-Where window in enter query, after entering a colon in any input field. Without this, Forms returns FRM-40367: Invalid criteria in field nnn in example record. Oracle shut it down to prevent "sql injection" attacks.
6. Jiniator setup:
Run file jinit.exe in C:\oracle\DevSuiteHime_1\jinit\jinit.exe
It installs Jinitiator 1.3.1.22.
I installed it in C:\oracle\JInitiator 1.3.1.22\
For Firefox, make sure a copy of file \bin\NPJinit13122.dll resides in C:\Program Files\Mozilla Firefox\plugins.
For Netscape, the path is: C:\Program Files\Netscape\Navigator 9\plugins
7. Browser settings
See the note above about using Firefox 2 and not Firefox 3!
In Firefox 2 go to: Tools-> Options-> Content
Uncheck the "Enable Java" checkbox
--Firefox terminates if this is not done!
Note: After my system automatically installed updates to either java or Firefox, re-check the "Enable Java" setting. I am suspicious that one of these installs re-enables java in the browser.
Also note: some web sites cannot display properly if java is disabled. Example: U.S. time website: http://www.time.gov Use Internet Explorer to view these.
In Netscape make the same changes as Firefox. Without disabling java, it also terminates when you try to run a form.
Creating a url to use in the browser:
Try this:
http://127.0.0.1:8889/forms/frmservlet
If it does not work, change the 8889 port number as follows:
Open file: C:\oracle\DevSuiteHome_1\install\portlist.ini
Note the number in line:
Oracle Developer Suite HTTP port = 8889
Use the number as the port number.
You can also change the 127.0.0.1 to the computer name:
Control Panel, System and Maintenance, See the name of this computer (under "System"). Mine is "steve-PC"
So the alternate URL is: http://steve-PC:8889/forms/frmservlet
To try out the URL, start the OC4J instance set up above. Then start either Netscape or Firefox, and enter the URL. You should get a welcome screen.
If the above URL works, start up the Forms Builder, and open Edit, Preferences. On the General tab, uncheck the "Build before running" check box (optional). On the Runtime tab, set the "Application Server URL to the url above.
To run a real form, add this to the URL after frmservlet, (with no spaces):
?form={formname}&userid={userxxx}/{passwordyyy}@{connect-string}
but replace the parts in curly braces with the appropriate values. Example:
http://127.0.0.1:8889/forms/frmservlet?form=ABC&userid=abc123/zyx@orcl
Setting up Forms Builder to directly run a form in the browser:
Run the Forms Builder. Go to Edit, Preferences, Runtime tab.
Set the Application Server URL to:
http://127.0.0.1:8889/forms/frmservlet
(or use whatever URL string you developed above)
Set the Web Browser Location to:
"C:\Program Files\Netscape\Navigator 9\navigator.exe"
(or an equivalent to run the Firefox browser).
8. FORMSWEB.CFG file changes
The file is located at:
C:\ORA_DS_101202\DevSuiteHome_1\forms\server\formsweb.cfg
I changed the following two lines in the file, but these are my personal preferences:
separateFrame=true
lookandfeel=Generic
9. FMRWEB.RES file changes
For Oracle help: Enabling Key Mappings
The file fmrweb.res defines actions (triggers that run) when a function key is pressed while running Forms. The one released has unix-style key mapping, but I prefer keys originally mapped for Windows PC Forms users. There is a fmrpcweb.res in the same folder that can be renamed to fmrweb.res.
In the C:\oracle\DevSuiteHome_1\forms path, I renamed fmrweb.res to fmrweb_orig.res.
I have a file that I prefer to use, so I put it into the folder as fmrweb.res. The contents are listed below. It is organized so the most important keys are listed alphabetically at the top (URFD column is the sort column), followed by a group of less-important keys. These are keys that are available to users, but they either would not use, or are disabled within most forms. The URFD column in the second set starts with a hex A0 character, which is a high-order space, so collates after normal alphabetic characters. (Note: If you want to copy the text below and use it, the hex A0 character has been changed by the forum software to a space. So you would need to use a text editor with hexadecimal character capabilities to replace the space with the original character. )
My file has special keys defined for F2 (I use it for a debugging Key-F2 trigger in my forms), and a "Cursor to Home" F12 function. All the rest are pretty much the same as in the released fmrpcweb.res file, only mine are organized alphabetically on the URFD column.
The Web Forms fmrweb.res file is editable using any programming editor (NOT MS Word!!!). The old Client/Server key mapping file, fmrusw.res, could only be changed using the Oracle Terminal program (and it is a pain to use).
Here is the main part of my fmrweb.res file:#
#Jfn :Jmn: URKS :Ffn : URFD
# : : (User-readable : : (User-readable
# : : Key-sequence ) : : function description)
118 : 1 : "Shift F7" : 74 : "Clear Form"
121 : 0 : "F10" : 36 : "Commit"
117 : 0 : "F6" : 65 : "Create Record"
10 : 1 : "Shift Enter" : 82 : "Cursor to Home" # sdsu uses this
123 : 0 : "F12" : 82 : "Cursor to Home" # sdsu uses this
 #: --Alt+Home works, but leaves the Action (first
 #: --pull-down menu item) highlighted. Press Esc or
36 : 8 : "Alt Home, then Alt" : 82 : "Cursor to Home" #-- Alt again to clear highlight.
117 : 1 : "Shift F6" : 63 : "Delete Record"
119 : 0 : "F8" : 77 : "Execute Query"
120 : 0 : "F9" : 29 : "List of Values"
9 : 0 : "Tab" : 1 : "Next Field"
40 : 0 : "Down-Arrow" : 7 : "Next Record"
9 : 1 : "Shift Tab" : 2 : "Previous Field"
38 : 0 : "Up-Arrow" : 6 : "Previous Record"
112 : 0 : "F1" : 35 : "Show Keys"
116 : 1 : "Shift F5" : 69 : " Clear Block"
116 : 2 : "Ctrl F5" : 3 : " Clear Field"
113 : 1 : "Shift F2" : 80 : " Count Query Hits"
112 : 1 : "Shift F1" : 78 : " Display Error"
114 : 0 : "F3" : 73 : " Duplicate Item"
115 : 0 : "F4" : 64 : " Duplicate Record"
69 : 2 : "Ctrl E" : 22 : " Edit Field"
122 : 0 : "F11" : 75 : " Enter " # Causes validation, w/o cursor move
118 : 0 : "F7" : 76 : " Enter Query"
81 : 2 : "Ctrl Q" : 32 : " Exit"
112 : 2 : "Ctrl F1" : 30 : " Help"
34 : 0 : "Page Down" : 66 : " Next Set of Records"
119 : 1 : "Shift F8" : 79 : " Print"
10 : 0 : "Enter/Return key": 27: " Enter/Next Field"
33 : 0 : "Page Up" : 12 : " Scroll Up"
116 : 0 : "F5" : 87 : " F5 Key for special uses"
#121 : 3 : "Shift Ctrl F10" : 82 : " Function 0" #--disabled. Cursor to home defined above
112 : 3 : "Shift Ctrl F1" : 83 : " Function 1"
113 : 0 : "F2" : 84 : " Function 2"
113 : 11: "Ctrl Alt Shift F2":95: " List Tab Pages" #<-REQUIRED, or F2 cant be assigned
114 : 3 : "Shift Ctrl F3" : 85 : " Function 3"
115 : 3 : "Shift Ctrl F4" : 86 : " Function 4"
117 : 3 : "Shift Ctrl F6" : 88 : " Function 6"
118 : 3 : "Shift Ctrl F7" : 89 : " Function 7"
119 : 3 : "Shift Ctrl F8" : 90 : " Function 8"
120 : 3 : "Shift Ctrl F9" : 91 : " Function 9"Finding Forms 10g Patchsets
Here is how to do the search: Log into metalink ( https://metalink.oracle.com ), then click on the Patches & Updates tab, then Simple Search.
In "Search by", select Product or Family. Enter "Developer Forms" in the box.
Then click the Release choices, and select "iAS 10.1.2.3"
Patch Type should be "Patchset/Minipack"
Platform or Language should be "Microsoft Windows (32-bit)"
Click Go, and the Forms 10g patch should show up. As of July, 2008 the only one available is: [url=
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=5983622&release=1710123&plat_lang=912P&patch_num_id=943599
]5983622
Edited 2008-12-12 to add a link to Oracle Note 559067.1 and added the fmrweb.res file listing.
Edited 2008-10-28 to change text format to work better within new forum format
Edited 2008-7-7 to add patchset search information.
Edited 2008-4-21 to modify information.
Edited 2008-3-6 to add information.
Edited 2008-5-29 to update information.

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

How do I download Photoshop for windows xp and vista.... I currently pay per month for photoshop and a computer running vista i ned to install photoshop on two aditional machines. How can I download, photoshop says I have an os that is no longer supported

I have a computer running windows vista that I pay per month for photoshop, I want to use photoshop on two other computers I have, not that it matters but they are both identical hardware wise, and software one runs xp and the other runs vista, I can upgrade but I am not intrested in other os. When I attempt to download I am told that my os is no longer supported. Now i know that I could find an offline version and should be able to get it installed but im not sure of a safe site that provides the iso or install exe. I want to use the other two computers because they have touch interface early computer/tablet highbird. thanks in advance.

Michaelt65951582 I am sorry but you will need to run at least the minimum operating system to use Photoshop. You can find the system requirements at System requirements | Photoshop. I would recommend upgrading to Windows 7 or later. You may find that your computer can support the more recent operating system depending upon the hardware installed.

Tecra M5 (PTM51E) and inability to install Vista x86 Quadro Graphics driver

Similar Messages

Maybe you are looking for