Tecra M6-EZ6612: Bluetooth and WLan run at the same range of radio frequency

Hi all
I've a laptop that's Tecra M6-EZ6612 ...
i've got a problem that when i setup the bluetooth i've got a massege that says a conflict between the wireless and bluetooth ...
Both of them are working in same range of radio frequency !!!
So, i wonder how can i change the frequency range of the bluetooth device???!!!

Do not care about it. Bluetooth hardware v1.2 or v2.0 have a technology included called AFH="Adaptive Frequency Hopping" which tries to avoid any conflict with WLAN. It may only be a problem if you have a very old BT hardware (before 2004).

Similar Messages

  • Terminating ssl on a bigip, disco and oid running on the same machine

    hi,
    please could someone point me in the right direction.
    I have a working discoverer server 10.1.2 running on a host on 7777
    I have a working 10.1.2 SSO and OIM 10.1.2 server running on the same host on port 7779
    Everything works fine with OID authentication being forwarded to AD servers.
    I'd like to put a bigip in front of the SSO server and terminate the SSL on the bigip, because this seemed to be simplest.......
    The bigip docs say delete the SSO Server from the partner apps (this isn't possible from the SSO web interface, I can only view it).
    I need to get discoverer to connect to the https://[bigip] for SSO authentication.
    I know I need to use ssoreg.sh to do this, the combination of commands eg which homes to use I am having difficulty getting right.
    Thanks in advance,
    Robbo

    And also, how I can interchange message between independent applications (or services) on the same computer?The same way you would interchange messages between them if they were running on different computers.
    You already seem to understand the concept of clients and servers passing messages between each other. There is nothing to prevent a "server" from being a client of another server. And there is nothing to prevent a client from running on the same computer as a server.

  • Can Xgrid controller and agent run on the same controller?

    I am trying to setup an Xgrid on 2 Mac OS X Leopard computers. My intention was setting up one computer as a controller/agent and other computer as an agent so that I can have a grid with 2 agents running on different computers. I setup my grid with xgridctl and using Xgrid Admin, I am able to view the grid on a GUI program. In Xgrid Admin, I also see 2 computers (One is local, other one is remote computer) listed with their IP addresses. Only the remote computer's status is "Available". Local computer's status is "Unavailable".
    I was about to conclude that you can not have controller and agent on the same computer but I decided to shoot an email to apple mailing list and expect some clarification.
    Thanks in advance for the support,
    Umut Tezduyar

    You might get a better response to this in either the [OS X Server forum|http://discussions.apple.com/category.jspa?categoryID=96] or even the [Xgrid area!|http://discussions.apple.com/forum.jspa?forumID=722]

  • Can DW CS6 and CC run on the same computer (was: Dreamweaver ?)

    I teach using CS 6 in my classroom, if my students download Dreamweaver CC can they work in both versions or will this cause an issue.

    The perpetual license version of DWCS6 is now 5.5 versions removed from "current" and in every new version there have been significant menu and functionality changes. If you are trying to "teach Dreamweaver" they will have a fairly difficult time following examples from DWCS6 in the latest version of DWCC 2014.1x (I don't have the latest and can't remember the exact build number)
    That being said, Creative Cloud subscriptions allow users to install all the way back to DWCS6 Cloud. Currently, you can have DWCS6 Cloud, DW CC and DWCC 2014.1x all installed at the same time. So, if your students were to become Cloud subscribers, or if the school is installing software for them to use, the old version can be added under the standard subscription using the Creative Cloud Desktop app.

  • Windows 7 and OSx running at the same time

    I have both Windows 7 and OSx Lion installed on my macbook pro.
    If I run Windows 7 with VMware Fusion would i need more RAM so my laptop could run faster. or would the RAM not effect at all?

    Yes more RAM would always be better up to a Point. About 8GBs is the sweat spot.

  • Can i use bluetooth and standard headphones at the same time?

    I would like to be able to use my bluetooth headset and have a line out of my iphone using the headphone output.  is this possible?  i seem to only be able to select one or another.
    thanks

    No, it's not possible... sound output is one or the other.

  • Stereo Bluetooth and headphone jack at the same time?

    I'm looking forward to the A2DP support in the firmware 3.0 update. I plan to get a motorokr s7hd. I'd like to be able to output audio from my iPhone 3G to my car via the headphone jack. Can I also connect a stereo Bluetooth headset and just use that in the event of a phone call? Will it mute/pause the music when a call happens?

    You can set the iPod app to output audio to your choice of a BT headset, or the jack output (not simultaneously). A BT headset can still get call audio if paired, but working in one channel only - no stereo.

  • Running windows and OS 10 at the same time.

    I am going to order a new iMac.  I want to be able to have windows and Mac running at the same time.  I will be using two monitors.  My question is would I be better to order more ram, or the fastest processor to optimize the performance?  My brother has a mac book pro running parallels, he says that it works or but is quite slow.  Any help before I order my new iMac would be appreciated.

    More RAM would speed things up more when handeling multiple applications at the same time.
    (Borrowed from Kappy)
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    Install the Apple Boot Camp software.  Purchase Windows XP w/Service Pak2, Vista, or Windows 7.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.

  • Bluetooth keyboard K810 and mouse T630 at the same time, repeating keys and mouse starts to stutter

    I use a Lenovo Thinkpad Tablet 2, Windows 8.1(core edition), x86 (32bit).
    If I pair a Bluetooth keyboard K810 and mouse T630 at the same time, with Wifi On, the keyboard starts repeating the keys and the mouse starts to stutter. Especially if WiFi is under load (when downloading something).
    This doesn’t happens if I pair only the keyboard, or if I pair mouse and keyboard with Wifi OFF.
    If I pair a Bluetooth keyboard and use a USB mouse with Wifi ON, everything works fine.
    If I pair a Bluetooth mouse and use a USB keyboard with Wifi ON, everything works fine.
    I think it is an issue with two Bluetooth devices paired at the same time with Wifi ON.
    So here is a summary:
    BT mouse and BT keyboard / Wifi ON ----> repeating chars and the mouse starts to stutter (bug)
    BT mouse and BT keyboard / Wifi OFF ----> works fine
    Only BT keyboard / Wifi ON ----> works fine
    Only BT mouse / Wifi ON ----> works fine
    USB mouse and BT keyboard / Wifi ON ----> works fine
    USB keyboard and BT mouse / Wifi ON ----> works fine
    Where is the problem? Is there any solution?
    Solved!
    Go to Solution.

    I have solved the problem. In the Wlan-Drives-Settings there is the "Bluetooth Collaboration" option. I put the value to "Disable" and now works everything like charm.
    Best regards, jC
    Broadcom manual:
    Bluetooth Collaboration
    Bluetooth Collaboration enables general purpose input/output transmit suppression protocol between the IEEE 802.11 media access control (MAC) and an external Bluetooth chip to minimize transmit interference. Bluetooth Collaboration is enabled by default.

  • Can I run Apple TV 1 and 2 together on the same iTunes account and on the same tv with two hdmi slots?

    Can I run Apple TV 1 and 2 together on the same iTunes account and on the same tv with two hdmi slots?

    Yes.
    Captfred

  • CAn I run Lion and snow leopard on the same computer with different sign-ins?

    CAn I run Lion and snow leopard on the same computer with different sign-ins?

    Alternatively, partition your internal HD and dual-boot it. Do note that you have to reboot to switch back and forth. You can't do it by logging out and back in.

  • Can I run Release Candidate (19.02), Beta, Nightly, Aurora and ESR versions on the same computer?

    I know I can run the Beta and Nightly together on the same computer because they are installed in different directories. What I do then is that I have a Profile for each version. What I do is I run FireFox.exe -ProfileManager when I start either the Beta and Nightly builds.
    My Question is can I also install the Aurora, Release Candidate and ESR versions on the same computer like I do with the Beta and Nightly? If so, how do I go about installing them in different directories? I will create new profiles for each version. What I then do is, copy everything in my original Profile to the newly create profiles so I can keep all my plugin/addons, themes, bookmarks, etc. the same.
    Next question, (I think I know the answer but I just want to make sure) now can I sync my bookmarks from each of the different profiles that I created?
    Secondly, I now I can do the ABOUT:CONFIG in the address bar of Firefox, does anyone have any idea where I can read up on what each entry means? Also, are there any other secrets in Firefox, similar to the ABOUT:CONFIG trick? I know of one app where you can do ABOUT:ME, but that's all I know.
    I know this has been asked billions of times, but I also have to ask. Is there any chance at all that Firefox, Thunderbird, and/or Seamonkey will be ever release for the iOS from Apple? I know that it's impossible, but maybe someone MIGHT have some positive thoughts on this?
    Lastly, I know this is off topic, but I'll give it a shot. I'm using Outlook 2013, does anyone know if Outlook can handle Newsgroups? The reason why I ask is because I've just learned that there are a ton of newsgroups for Firefox, ThunderBird, and SeaMonkey. I would like to, somehow, get those Newsgroups in Outlook 2013. I already get allot of the feeds for other things, so that's not a problem.
    I would appreciate it very much if anyone could help me with these issues.
    Thank You.

    You can consider to use Firefox Sync to sync all the profiles.
    You can do a custom install of each version and install each version in its own program folder.<br />
    Safest is to modify the desktop shortcut and add -P "profile name" to the command line to start each version with its own profile.<br />
    Be careful with clicking a file in Windows Explorer to open the default browser, so make sure to select the correct profile in the profile manager and check the don't ask setting.
    * http://kb.mozillazine.org/Shortcut_to_a_specific_profile
    * http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
    * http://kb.mozillazine.org/Bypassing_the_Profile_Manager
    * http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

  • How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interrupti​on.

    I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
    So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
    Thank you in advance.
    Regards,
    Attachments:
    HP8563E_Query_Amplitude.vi ‏37 KB

    Hi,
    Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
    So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
    I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
    So I want to acquire 1 time amplitude from spectrum analyser each 5
    period of the signal that I am acquiring from parallel port.
    So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
    Here is a new algorithm.
    1) i=0 (counter: number of period)
    2) I read value from In Port
    3) If I acquire a period
    i= i+1 (another period)
    4) If i is multiple of 5 (If I read 5 period)
    acquire 1 time amplitude and write to the same
    file this amplitude and the corresponding distance
    Distance = 12*i). Remember each period of signal
    Corresponds to 12 Inches).i has to take these
    values: 5,10,15,20,25,35,40,45,50,55,60............
    5) Back to 2 if not stop.
    Thank you very much for helping me.
    Regards,
    Attachments:
    Acquire_Amplitude_00.vi ‏59 KB
    Figure_Algorithm.doc ‏26 KB

  • How to run save for web and contact sheets at the same time

    Hi
    my question is simple and a means to save time-
    Lets suppose I have 3 camera images and I want to run either save for web applications on 2 cameras at the same time, how/can i do that to save time or lets say contact sheet action on 1 and save for web on the other to save time or photoshop files and this runs in the background?
    would really help save me time.

    Even if you could run the three process in the background at the same time I do not think the duration of the total execution time would be any shorter. You would still be executing the same number of processor instruction reading and writing the same number of files. If the whole processor was constrained by the processing power running them cuncurrenly may increase the processing time because of contention for the processor. If the processes are IO bound that will not change a overlaping the processes may cause more hard disk seaking because of contention of the hard disk arm.

  • Who can shed some light on my ongoing connection problem. After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet. I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to

    Who can shed some light on my ongoing connection problem.
    After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet.
    I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to the net and function well.
    So I cleaned up the ipad completely, installed the latest firmware and reinstalled my apps : no connection.
    I tried all things of resets and forgets. No result.
    I have been fondling with my Airport Extreme 5 , but that did not help much.
    This morning I went to a neighbor , hooked my ipad air on his network, typed the password and the thing all worked fine.
    I have tried to connect the ipad air as an ethernet client, but that did not work. „Not enough power“ was the statement
    Ideas anyone ?

    Yes I tried this manyfold. But did not work.  Reading on, I took Tesserac's advice. Shut down router and computer.
    Start router after 15 minutes and wait another 10 minutes before starting the computer.
    Et voila.... everything is back in working order,
    Regards form Curacao, Dutch Caribean.
    Pete van Linden

Maybe you are looking for