Tecra R10-10a poor speaker quality

Hi,
I just bought a tecra r10-10a which performs perfectly. My only complain is an *extremely poor sound quality* coming out from the built-in speakers. I'm not complaining about lack of bass frequencies, which is unavoidable for that size, but of severe clipping distortion in the mid-hi freq range even at the lowest volume settings.
It's simply much worse than my former cheaper acer notebooks. You just can't listen to music.
I also noticed than pressing firmly against the case on top of the speakers I managed to supress a noisy ressonance near 2kHz.
I wonder if this quality is expected in a Tecra notebook sound system, of if someone of you could suggest me some kind of trick to avoid that (?)
Thanks in advance

Hi
I think you compare the Tecra speakers with external speakers or the Harman/kardon speakers from Qosmio X300.
Tecra notebooks are not designed for multimedia and they are not a high end entertainment system. The notebooks are designed for the daily work and office usage.
A friend of me has a Tecra notebook and he is very satisfied with it. The quality is perfect.
Anyway, if you really think a better sound you should try to update the sound drivers and check the sound settings. Maybe there is a wrong sound environment activated that causes this poor sound.
Good luck!

Similar Messages

Nokia 6730 - Poor Speaker Quality

Has anyone experiences poor speaker quality. I have recently obtained a Nokia 6730. It is two months old and now the speaker for ring tones sounds like it is distorted. Almost like they are blown yet the phone's never been used at full volume. In fact the phone is used in the factory "General" or "Silent" settings.

Hi noFan,
When you said sound of voice, are you referring to voice calls? If yes, please note that the quality of the audio that is coming out on the phone is based on the audio frequency that your operator use. If your operator supports "Wideband audio", also known as HD voice, you will have a high definition voice quality. If they are just using the "Voiceband" which is the standard, you will have the normal quality sound for voice calls.

Lenovo Flex 2 14, poor speaker quality.

I just bought a Flex 2 14 and I feel that the speaker quality is really bad. The speakers sound plastic and, to be honest, crappy.
I've tried tinkering around with the audio settings and the Dolby thing, and while it gives it a little bit of boost, the quality still feels quite poor.
I just wanted to know if this is normal? Or have I had a bit of bad luck when it comes to my speakers?
Thanks for your input.

I have the same problem. Very disappointed. I have a very old HP and it has 100% better audio that this laptop. Wish I had bought something else.

Poor speaker quality

My mid 2009 macbook's internal speaker sound quality just got really poor. they were fine but all of a sudden they sound like a bad transistor radio. both speakers are still working but just sound horrible. sound is fine through headphones. any thoughts? i have already reset pram and smc.

Here is one suggested fix that works for many of us who experience the low sound issues on laptops (like the L505 series) which use the Realtek HD Audio drivers. These directions are for Windows 7, other operating systems may require a slightly different set of steps.
First, Download and install the latest Realtek HD Audio drivers from the Realtek website. If the ".exe" or executable file version of the Realtek HD audio driver is downloaded, this file may need to be run twice (run installer, reboot computer, run the installer a second time, then reboot the computer a second time) to properly install the audio driver.
Second, once the audio drivers have been updated, enable "Loudness Equalization" on either the Start --> Control Panel --> Hardware and Sound --> Realtek HD Audio Manager --> Sound Effects tab, then click OK to save the setting change. Or on the Start --> Control Panel --> Hardware and Sound --> Sound --> Speaker Properties (select Speakers then the Properties button) --> Enhancements tab, scroll down the list of sound effects to enable "Loudness Equalization" then select the OK button to save the setting changes.
Once the Realtek drivers have been updated and the "Loudness Equalization" has been enabled the system sound audio level is much louder, however the DVD and Audio CD audio levels might continue to be low for some users. Some find that setting the Equalizer, found under the Realtek HD Audio Manager Sound Effects tab or on the Speaker Enhancement tab, to "Powerful" seems to help with the sound levels.

Poor sound quality with 7g Nano through docking speaker.

Very poor sound quality with 7g Nano through docking speaker. Sound through ear bud is fine. A different 7g Nano sounds fine through the same speakers. There does not seem to be debris in the lightning port. Any suggestions?

Hey Failagain,
Thanks for the question. The following article may help you to isolate this issue further. Based on the information you provided, the next best step may be to restore the iPod nano:
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Thanks,
Matt M.

MacBookPro C2D - poor overall quality

I have a MacBookPro 15" C2D and I am very dissapointed by the overall quality. I had to turn it in the 2nd time. Problems that occured: strange high frequency sound, hard drive making wired noise. Left USB port not working, when closing the MacBook there's a clearly visible gap on the left side. Airport Express signal very low. Speaker on left side seem to have a bent. Somehow I feel like its a poor overall quality. When I look at my Samsung x 20 who was 1/3 cheaper but is solid build with no problems I really wonder. Everywhere Apple gets high praises for his quality on this new MacBook Pro line, but when I llok at mine I am very very dissapointed for what I get for my money.
Anybody else experiencing those kind of problems?

I have had similar experience. Just this evening, we sat my old G3 laptop next to my MacBookPro15" and played the same downloaded songs from iTunes and the sound quality is SO SIGNIFICANTLY POORER it is unbelievable. This is my 2nd MacBook Pro. The first I turned in to the dealer and I received a replacement after one month. The first refused to boot after I left the shop and I found this out after I left to take it on a one month European trip. This 2nd one has such poor sound quality. This is my 8th Apple computer and my 15th Apple product. How did you resolve your issues? Do I have to turn this one in to Apple as well? > I have a MacBookPro 15" C2D and I am very
dissapointed by the overall quality. I had to turn it
in the 2nd time. Problems that occured: strange high
frequency sound, hard drive making wired noise. Left
USB port not working, when closing the MacBook
there's a clearly visible gap on the left side.
Airport Express signal very low. Speaker on left side
seem to have a bent. Somehow I feel like its a poor
overall quality. When I look at my Samsung x 20 who
was 1/3 cheaper but is solid build with no problems I
really wonder. Everywhere Apple gets high praises for
his quality on this new MacBook Pro line, but when I
llok at mine I am very very dissapointed for what I
get for my money.
Anybody else experiencing those kind of problems?
I

Having a poor sound quality

Recently I am having trouble with poor sound quality. I am using software
OS X 10.8.5 (12F45). when i turn on the macbook pro i can hear normal sound before log in my account. When hearphone is connected it gives the normal sound as before but built in speaker gives poor one. Guys any suggestions how to fix the problem????????

hi Sylph!
just checking ... was this the KB doc you looked at?
iTunes and QuickTime for Windows: Songs and other audio don't play correctly
if so, did you try the other possibilities listed there?
(since you've got itunes 6.0.x, you'll need to try the QT 7 version of the waveout fix.)
love, b

I purchased an iPod touch few months back. And i am very upset with the volume output it produces. iPod being an music player, has poor volume quality then my iPhone 3gs. Can anyone pls help. How do i rectify it?

i purchased an iPod touch few months back. And i am very upset with the volume output it produces. iPod being an music player, has poor volume quality then my iPhone 3gs. Can anyone pls help. How do i rectify it?

Problem with both the speaker and earphones?
Have you tried another pair of headphones?
Yu can try the standard fixes to rule out a software problem:
- Reset. nothing is lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.

Poor sound quality in timeline and export; fine in Source?

Hello all.
Newbie to Pr but experienced pro in digital audio. I'm stumped and know I'm just missing something somewhere.
I've made a music video for one of my songs. The graphics are all done (in AE), imported to Pr and eveything looks great. I import the final mix of the audio and it sounds very low quality when played from the timeline and in the final output, regardless of format (I've tried several presets and custom settings as well). I played around and noticed that the audio sounds fine when played from the Source window inside Premier.
The Pr session is comrised of 18 video tracks (not all playing at once, of course) and one stereo audio track.
I've tried re-exporting the audio from Logic at different bit depths, sample rates and file formats (mp3, wav, AAC, etc) but the results are the same every time: Source (Pr)sounds fine, Logic output sounds fine, rendered / timeline playback sounds like very low quality mp3 and final product sounds just as bad.
I've tried everything I can think of. I hope one of you can show me what I'm missing.
TIA!
Mark
Premier Pro CC
Processor 2 x 2.8 GHz Quad-Core Intel Xeon
Memory 8 GB 800 MHz DDR2 FB-DIMM
Graphics ATI Radeon HD 2600 XT 256 MB
Software OS X 10.9.1 (13B42)

Thank you for the reply!
I was experiencing the same results no matter what export settings I used. Plus the poor sound quality was present in the timeline itself, without even exporting the project.
I finally threw my hands up, started a completely new project, drug the same audio file in... sounded fine. Copied / Pasted the video clips from the original, broken project and boom, eveything is fixed. Yeah, corrupted Pr file it turns out. All I had to do was start a new project and import all the old components.
I've had to do this in Logic a lot (increasingly, these days). I just wish I'd tried it 10 hours earlier! Ha.
Anyway, problem solved, and thanks very much!

HP LaserJet 2600n poor print quality/streaking

I am the original owner of an HP LJ 2600n with a poor print quality/streaking issue. The poor print quality occurs with any and all paper that I use (currently Hammerhill 20# stock) and occurred with Windows XP and Windows 7. The print cartidges are all genuine HP and changing them does not make any difference. I have cleaned the front door roller with no improvement. My firmware version is 20070716. The black cartridge is at 33%; yellow 75%; cyan 91% and magenta 91%...
Any advice would be appreciated. An example of the output is attached below:

Hi everyone,
I have resolved my problem. I took a leap and purchased a new toner cartridge, and the new catridge works great. Installed it yesterday and the test page comes out clean, clear and with no double image. I'm happy.
Apparently the printer had not had a print item sent to it in over a year. I think that was actually hard on the toner cartridge.
Tthanks to everyone for their help via private emails!
mark

Very poor video quality after transcoding in Adobe Encore CS5.1

MERRY CHRISTMAS AND A HAPPY NEW YEAR!
I have very poor video quality after transcoding the video file (MPEG) in Adobe Encore CS5.1. Below you see my used settings in my filmproject.
The problem exists after transcoding in Adobe Encore CS5.1. I checked all steps and found out that there is no problem until transcoding. My exported file in MPEG has very good video and audio quality.
Facts:
1. Camcorder: Panasonic AG-AC160AEJ
Operating System : Windows 7, 64 Bit, Ultimate edition
Source files: MTS files
Recording settings (clip settings):
Type: MPEG Movie
Image Size: 1920 x 1080
Frame Rate: 25,00
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Pixel Aspect Ratio: 1,0
2. Sequence settings in Premiere Pro
Sequence was created from Clip directly with settings above.
3. Exporting settings in Adobe Premiere Pro:
Match sequence settings was activated. Now other changes were set.
4. Exported File:
Video
Image Size: 1920 x 1080
Data Transfer Rate: 25920 kBit / s
Frame rate: 25
Audio:
Bit rate: 384 kBit / s
Channels: 2 (stereo)
Frequence: 48 kHz
5. Transcoding settings in Adobe Encore:
I used different transcoding settings such as automatic DVD Transcoding, CBR and VBR.I also set “use maximum render quality”. But all results were always the same: very poor quality.
Why does the encore transcoding cause such bad video quality?
How can I solve this problem?
Please help me soon.
Best regards.

Hi Ann,
1) I did not only „Automatic (based on source)“ options in my tests, but also many other customized options.
The results are very poor. I have done a new test with the following settings. The result is also poor:
Download link: http://www.klavierlehrer-bayern.de/download/test_mpeg2dvd_1.m2v
Export Settings:
Format: MPEG2-DVD
Preset: Custom
Codec: MainConcept MPEG Video, Quality: 5
Frame Rate: 25 fps
Field Order: Upper
Pixel Aspect Ratio: Automatic (based on source)
Render at Maximum Rate: [active]
Bitrate Encoding: VBR, 2 pass
Minimum Bitrate (Mbps): 5
Target Bitrate (Mbps): 9
Maximum Bitrate (Mbps): 9
GOP Settings
M Frames: 4
N Frames: 12
Use Maximum Render Quality: [active]
Multiplexer: None
2) Why shouldn’t I use the “Match Sequence Settings” in exporting? Because of the big output file size?
I used it and the results are very good as I expected:
Download link: http://www.klavierlehrer-bayern.de/download/test_MatchSequenceSettings.mpeg
Export Settings
Match Sequence Settings [selected]
1920 x 1080, 25 fps, Upper, Quality 50
User Maximum Render Quality: [active]
3) I tried also Dynamic Link in PremierePro (to Encore).
The results are also poor.
4) I will test also LagarithLoslessCodec and frameserving +DGMPGDec. But the video is vertical long drawn-ot.
I think I did not use it correctly.
Regards

HT201335 Airplay Mirror Poor Image Quality on CBS app - help?

Airplay mirror from iMac/iPad to HD TV w/Apple TV has a Poor Image Quality when watching network shows via for example the CBS.com site or the CBS app. The image looks dark, not HD at all. My internet speed/performance is obviously not the issue because Hulu, Netflix etc all come in great using Apple TV ~ sorry, not all that savvy in this department, is the poor picture down to it just being a mirror of the iMac or iPad or is there a setting or something I am missing?

You should use the Acrobat extra menu in word 2010: then edit Preferences and choose Conversion settings : High quality print
Hope it helps

Has anyone had issues with poor image quality when using lightroom to process raw images from Canon 7dmk2

Hi everyone..
..I have been having image quality issues when using Lightroom to process raw files from a 7d mk2... They are all soft with poor clarity.....tonight in despair I tried processing them using canon's software and they are totally different..."much better"
anyone else had similar problems....Andy

I have a 7D2 and have not had what I interpret as poor image quality that has anything to do with the camera.
Can you post a screenshot of what you’re seeing and what specifically you don’t like? Maybe there is something you can do differently or at least there may be an explanation for what you’re seeing.
And if you have a raw image that you wouldn’t mind sharing in a public forum, upload to http://www.dropbox.com/ then post a public share link to it in a reply, here.
In other words post a screenshot of what you see in LR, another of what you see using DPP, and a link to the raw file you’re processing.

Aperture Light Table - Poor image quality

I am using the Light Table function in Aperture (3.4.5.) and I had an issue with the quality of the images on it, when zoomed in or scaled to fit.
The quality of the (larger spread) images looks poor. As if I zoomed in on a thumbnail.
I was looking for a discussion on this and saw some (archived) threads. None of them solved.
However, I think I have found a workaround.
If you get this situation, you can select the image(s) on the light table and regenerate the preview.
Option-click Menu => Photos => Generate Previews
(note: if you don't use the Option key, you will get Menu => Photos => Update Previews and Aperture may say (unjust) that the preview is already up-to-date).
That solves the poor image quality look.

I just remade the same book - as a test - in the extra large hardback format (ie. the one I used for the previous publication, last year).
This time, the pictures are fine. The images appear to be the same quality in the PDF as the originals - much, much better. The size of the file has increased massively too > up from just 2.6MB to 52.8MB.
So does the books production function work well only with the biggest, most expensive option?
I'd really appreciate some feedback from anyone who's tried the different sizes, and preferably some brilliant ideas to make them all work equally well.

Poor image quality save for web

It doesn't matter whether i'm exporting from Ai or Ps or whether it's CS6 or CC. I have changed the raster settings in Ai and i've also tried all optimization options with all different export file types (jpg, png, gif) at all different quality settings. It doesn't matter if I start with an ai, eps, pdf, png... the export result is always poor quality.
I have tried exporting at 300ppi and that does fix the quality issue and bloats the file size, but this way (the export route) is so time consuming since you have to resize your artwork each time as well as the artboard so that it doesn't cut off pixels. Save for web never used to have these quality issues and it also never used to cut off pixels around the edges. These workarounds prove very time consuming and produce file sizes that are not ideal.
When i first noticed this issue I was using Mavericks with CS6 and since am using Yosemite and Creative Cloud.
Steps to reproduce:
1. Create any bitmap or vector graphic in Ai or Ps, It doesn't matter whether you convert text to outlines or not
2. Save for web
3. View image in any application or browser to see poor quality and pixel trimming. Others running the same version and system are not having this issue, but I have checked many forums and found many others that do have this same issue but can't seem to find a solution.
Results:stair stepping, degradation, pixel trimming, general poor image quality
Expected results: Previously the save for web feature allowed for a decent quality image

First try the Cleaner. here's the link for CC but there exists one for Cs6 as well Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Everything I have read says that you kind of have to compromise file-size for quality. Could you post a screenshot of your settings?
also, if it helps: Creative Suite * Optimizing images

Tecra R10-10a poor speaker quality

Similar Messages

Maybe you are looking for