Tecra R10 - How to remove the HDD?

Is there a description available hoe to remove a harddisk in a Tecra R10 and plugin a new harddisc?

Hi buddy,
As far as I know the HDD is placed under the notebook cover and therefore a lot of parts must be removed like CD drive, keyboard, base assy, etc.
In my opinion its a tricky procedure and should only be done from a notebook technician because a lot of screws must be removed as well.
Is current HDD defective or why you want to exchange it?

Similar Messages

S35dvd: How to remove the HDD?

Can anyone tell me how to remove a hard drive from a s35dvd please? I can not find a service manual anywhere and I need to remove the drive to try to remove a load of viruses that i can't remove with windows running or even in safe mode.
Thanks

Hi
Unfortunately this Toshiba unit it unknown to me and I dont have found any officials documents about the HDD replacing.
But as far as I know there should be only 2 possibilities how to remove the HDD.
1.) The HDD slot is placed at the bottom of the unit and you need to remove only the HDD cover.
Or
2.) The HDD is placed in the notebook. In this case you have to remover the keyboard and some covers to replace the HDD
Well, I can give you only this info. I think if you want to know the detailed instruction you should contact the Toshiba service partner because he has a more detailed informations about such cases.

How to remove the HDD passwordon Portege R500?

Hello,
do you know how to remove HDD password? I know current password, but if I try to remove it by changing from current password to blank password it doesn't work.
There is still current password.
Thanks

Hi
I hope you are using the correct and right HDD password because its needed to remove and to delete the existing HDD password.
If you would forget the HDD password then the HDD would be locked and you would be not able to unlock the HDD!!!
Generally the HDD password can be deleted in the BIOS.
Please ensure that other password would be removed too.
I found a useful forum thread about a similar HDD password issue:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=66386&#66386
According to the info posted by user jonr17 you should firstly ensure that all other passwords like BIOS, User and Supervisor passwords are removed.
Then try to remove the HDD password from the BIOS.
Bye

Satellite P10-804: How to remove the HDD?

I'd like to remove the 60Gb internal hard drive from my satellite P10-804 and replace it with a bigger drive, but cannot figure out how to get inside the case to remove the HDD.
Does anyone have details on how to do this?

Hi
In my knowledge the HDD must be placed under the optical dirve.
To remove the HDD, first remove the battery pack and optical drive, then follow the steps below:
1. Remove four black screws securing the aluminum shield covering the HDD and lift it out.
2. Gently pull the HDD toward the computers front panel to disconnect it from the system board, then lift it out.
3. Remove the four silver screws that secure the HDD case to the HDD.
But be careful. If you have no experiences ask someone with more experience in such replacements.

On a new imac how much of the HDD is already used with the OS,iLife,apps..

Looking to buy my 1st ever iMac, the one Im going to get is the base one, with 250Gb HDD (I may upgrade to 320Gb for UK £29 though)
My question is how much of the HDD is already used by OS X and everything on it? I understand there is some free trial stuff onthat can be installed eg MS Office, iWork etc I would want these removed as wouldnt want them so how much is left before you start adding your own stuff
I also want to install Win XP on it so need to know what to do, 250Gb in todays computing is very stingy I think, so I need an idea
cheers

Here's are some disk usage information from my 20" white C2D. The numbers
are running totals that include periodic software updates and some of my own
stuff -- but that would be less than 0.5 GB of the final total.
OS-X with "no optional packages" is a very usable system; it includes 'core'
applications such as Safari, iTunes, Quicktime. It does not include any of the
iLife apps or the iWork/MS_Office test-drive bloatwares.
The large increase in disk usage for a minimum Leopard system is partly due
to the inclusion of more apps in the 'core' OS package. Some things that were
optional in Tiger have become part of the "minimum" Leopard install.
The Xcode software development tools are a standard part of every OS-X
distribution, but since most customers have no use for them, they're not
included in the factory-installed disk image. If you don't plan to install
them, subtract 3.4 GB from the final tally.
Factory pre-installed Tiger 10.4.8 & bundled software .................. 16.4 GB
Erase & Install Tiger 10.4.8 with NO optional packages .................. 2.9 GB
SoftwareUpdate to 10.4.10, with NO optional packages .................. 3.1 GB
Erase & Install Leopard 10.5.0 with NO optional packages ............... 6.6 GB
SoftwareUpdate (11/11, immediately after Leopard install) ............. 6.7 GB
Install Xcode SW development tools from Leopard DVD ................. 10.1 GB
Install & SoftwareUpdate iLife'08 (except iWeb & GarageBand) ....... 12.3 GB
SoftwareUpdate to Leopard 10.5.1.................................................. 12.5 GB
IMO, 250 GB is FAR more than you'll ever need for installable software plus
a sizeable collection of music/photos. OTOH, no amount of disk space will
ever be enough for an avid music/photo/video junkie, and everyone should
have an external backup drive. So, stick with the standard internal drive and
buy more external storage.
...a billion here, a billion there -- and pretty soon you're talkin' 'bout alot of money,
Looby

How To Remove The Hard Disk On A HP Pavilion Slimline s5220y Desktop

Hello. I need to replace the HDD on my wife's s5220y pc. This model has a case that only the side panel comes off . Other simular models have a case that the side and bottom panel comes off in a L shape making it easy to remove the HDD. Can someone explain to me how to get the HDD out of this model or refrence me to a video or a diagram. Thanks much.
This question was solved.
View Solution.

Hi:
Please see if the info in the upgrading and servicing guide is of help to you:
http://h10032.www1.hp.com/ctg/Manual/c01859458.pdf

Satellite 1410-902: How to remove a HDD

Hi. Does anyone know how to remove a HDD from a Toshiba Satellite 1410-902?
Opening the panel there it is the HDD, but there is no clear way to get it out...I don't want to force.
Thanx for the help.
Luca.

Hi
The HDD slot is placed at the bottom of the unit. You have only to remove the screw which secures the slot cover. Then you can simply remove the HDD.
But be careful.

ALV . How to remove the sort buttons on toolbar in ALV report?

Hi,experts
As you know, in default case , the alv report will display two sort buttons(ascending ,descending) on its toolbar , So How to remove the sort buttons on toolbar in ALV report?
Thanks for your help .

Hi guixin,
1. Before calling REUSE_ALV_LIST_DISPLAY
2. Write this code :
data : excl type SLIS_T_EXTAB.
data : exclwa type SLIS_EXTAB.
exclwa = '&OUP'.
append exclwa to excl.
exclwa = '&ODN'.
append exclwa to excl.
3. Then while calling the FM,
pass this parameter also .
IT_EXCLUDING = excl
It will work fantastic.
regards,
amit m.

How to remove the '#'symbols for infoobject movement types in bex reporting

Hi All,
I have a problem in Bex reporting. The problem is when ever executing the report that time some of the characteristic values is shown in layout '#' Symbols. i want to remove the '#' valuse in report.
is it possible please give me step by step procedure for how to remove the '#' Symbols in reporing layout.
this is very urgent please help to me on this issue.
Thanks & Regards,
Guna.

Hi Guna,
To achieve this issue, we need to replace the value of #, we need to change the description while retrieving the data from tables. So we need to write some ABAP code in SE38. Go to RSA1 transaction and go to Info objects tab. Then go to context menu for cProject Key Figures as shown below. Click on the Object Overview to get the overview of all the info objects. Here you can see the field names which are used to know the table names.
In SE11, type the table name in Database Table field. Now press F4, then you will get the next screen to select one of the P/Q/S/T tables.
Now click on the button rounded in the below screen to view the data in the table.
Now click the execute button or press F8 to view the records.
Now go to Tcode: SE38. Create a source code and give some program name for that source code. To write code, you need access key. Contact your BASIS for this.
Now write the below code for that particular table in which you want to change the value # to description Blank. In the below source code, we are updating particular table, setting the field as Blank where it is null or no value. Here the field will automatically get updated to # if there is no value or null.
update /BIC/PXXXXX set /BIC/ZXXXX = 'Blank' where /BIC/ZXXXXX is null or /BIC/ZXXXX = ''.
if sy-subrc eq 0.
write 'successful'.
commit work.
else.
write 'unsuccessful'.
endif.
OR
If this # is because of the missing master data than,
right click that IO -> maintain master
you will see first row as a blank.
whatever value you maintain in this row that will come in the report for all Not assigned # values of the master data in the report.
maintain it according to your requirement, save and activate the master data
Hope this helps u...
Regards,
KK.

How to remove the the standard button APPEND/INSERT/DELETE in webdynpro alv

Hello,
how to remove the the standard button APPEND/INSERT/DELETE in webdynpro-abap alv
Thanks
Rakshar

Use this.
    data lo_cmp_usage type ref to if_wd_component_usage.
    lo_cmp_usage =   wd_this->wd_cpuse_alv1( ).
    if lo_cmp_usage->has_active_component( ) is initial.
      lo_cmp_usage->create_component( ).
    endif.
    data lo_interfacecontroller type ref to iwci_salv_wd_table .
    lo_interfacecontroller =   wd_this->wd_cpifc_alv1( ).
    data lo_value type ref to cl_salv_wd_config_table.
    lo_value = lo_interfacecontroller->get_model(
    data: lr_std type ref to if_salv_wd_std_functions.
    lr_std ?= lo_value.
    lr_std->set_export_allowed( abap_false ).
NOte: ALV1 is alv component name
Regards
Srinivas
Edited by: sanasrinivas on Dec 1, 2011 6:11 AM

How to remove the sort function on the drill down and then save

how to remove the sort function on the drill down and then save in the change local view of the Query
Is it possible to change the porperties of any characteristic in the local view and then save?
If so please post the answer.

I do not think that option is possible.
Regards,
Venkata Boga.

How to remove the white space that is now above the main images on each page?

http://www.nydogworks.net
Hello,
I took over updating some things on my site from my web designer. The main images on each page used to be flush with the navigation bar on each page. Now there is a white space in between each one. Can you tell me how to remove the white space?
<div id="container">
<div id="imgholder"><img src="images/feature-aboutus.jpg" width="951" height="341" alt="" />
</div>
<div id="pageContentNoside">
   <div id="sideSub">
     <form action="form.php" method="post" name="form2" id="form2"> <table width="250" border="0" cellpadding="2" cellspacing="2">
       <tr>
         <td width="273"><h2>Quick Contact</h2></td>
         </tr>
       <tr>
         <td class="mainContent">Your Name</td>
         </tr>
       <tr>
         <td><span class="style9">
           <input name="forname" type="text" class="colorfieldssmall" id="forname" size="20" />
           </span></td>
         </tr>
       <tr>
         <td class="mainContent">Your Email Address* (required)</td>
         </tr>
       <tr>
         <td><span class="style7 style9">
           <input name="admail" type="text" class="colorfieldssmall" id="admail" size="25" />
           </span></td>
         </tr>
       <tr>
         <td class="mainContent">Phone Number</td>
         </tr>
       <tr>
         <td><span class="style7 style9">
           <input name="phone" type="text" class="colorfieldssmall" id="phone" />
           </span></td>
         </tr>
       <tr>
         <td><span class="mainContent">Type of Dog Training</span></td>
         </tr>
       <tr>
         <td class="mainContent"><span class="style9">
           <select name="need" class="colorfieldssmall" id="need">
             <option value="select one">select one</option>
             <option value="Basic Obedience">Basic Obedience</option>
             <option value="Behavior Therapy">Behavior Therapy</option>
             <option value="Board and Train">Board and Train</option>
             <option value="Off Leash Training">Off Leash Training</option>
             <option value="Puppy Training">Puppy Training</option>
             </select>
           </span></td>
         </tr>
       <tr>
         <td> </td>
         </tr>
       <tr>
         <td><div align="left">
           <input type="submit" name="submit" id="submit" value="Submit" />
           </div>
           </td>
         </tr>
       </table></form>
     <h2><br />
       Dog Training Services<br />
       </h2>
     <ul id="subnav">
       <li><a href="basic-obedience.html">Basic Obedience</a></li>
       <li><a href="dog-behavior-therapy.html">Behavior Therapy</a></li>
       <li><a href="board-and-train-dog-program.html">Board & Train Program</a></li>
       <li><a href="off-leash-training.html">Off Leash Training</a></li>
       <li><a href="puppy-training-program.html">Puppy Training</a></li>
       </ul>
     <br />
     <br />
     <br />
     </div>
<div id="suggestPost"><a href="https://www.facebook.com/pages/NYDogWorks/219268038151244?fref=ts" ></a></div>
   <div id="mainContent">
     <h1 class="copyrightType">About NY DogWorks</h1><br />
     <h2> <span class="testimonal">The Owner of NYDogWorks</span>      </h2>
     <p><span class="copyrightType"><img src="images/dogpic.jpg" alt="Dog Behavior Therapy" width="183" height="275" class="h_img_float_right" /></span><strong>NYDogWorks L.L.C. is owned and operated by Master Certified Dog Trainer and Behavior Specialist Brian DeMartino. </strong><br />
       <br />
       His training is hands down the best out there. He has become one of the most sought after dog trainers throughout Long Island, Manhattan, & New York.<br />
       <br />
       With over 15 years experience training and rehabilitating some of the toughest cases of dog behaviors. He’s Mastered the Art of teaching top knotch obedience and manners with outstanding results and has developed the most full proof and guaranteed system to fully housebreak any puppy or dog in the shortest amount of time.<br />
       <br />
       He is Certified in dog training and dog behavior and is an Official Evaluator for the American Kennel Club’s (C.G.C) Program.<br />
       <br />
       <br />
       <strong>All About NYDogWorks</strong><br />
       </p>
<p><br />
</p>
     <p>NYDogWorks Dog Education, is a Professional Dog Training Company offering dog training for puppies and older dogs through customized in-home training programs by Master Certified Trainers in Nassau County, Suffolk County, Hamptons, Long Island, Manhattan, Brooklyn, Bronx, Queens, Rockland County, Westchester County, Orange County, and Bergen County New Jersey. NYDogWorks offers obedience training, Housebreaking, Manners, socialization for your dog, Puppy Training and Education, Behavior Therapy, Trick Training, Agility, Complete Off Leash Training, Sport Work, and Personal Protection Training. <br />
       <br />
       <strong><br />
         NYDogWorks Boarding & Training Programs</strong><br />
       </p>
<p><br />
    We offer boarding and training programs done in the home of owner, Brian DeMartino. This is a customized 2-6 week program to suit your dog's needs, great for someone who feels they do not have the time or patience to train or rehabilitate their dog at their home. This is a 100% guaranteed program. Your dog will stay with us for no additional charge if we feel that he or she has not learned all that was agreed upon. We guarantee that if there is any regression within 3 months of your dog being back home with you, he/she will come back to us for no additional charge.<br />
    <br />
    <a href="board-and-train-dog-program.html">View Boarding & Training Programs</a></p>
     <p><br />
       </p>
     <p><br />
       <br />
</div>
   <div id="breadCrumbs">
     <p><a href="index.html">Home</a> > NY DogWorks - About Certified Dog Trainer Brian DeMartino<br />
       <strong>Serving all of Long Island, Nassau & Suffolk County, Manhattan, Brooklyn & Queens</strong></p>
     </div>
</div>
    <div id="footer">
      <div id="footermenu">
      <div id="footermenu1">
      </div>
    </div>
   <div class="phoneNumber" id="copyright"> Copyright © 2014 NY DogWorks</div>
     <div class="websiteDesign" id="sitedesigner">Long Island Website Design by <a href="http://www.wetribet.com" title="Wet Ribet" target="_blank" class="medlink">Wet Ribet</a>     </div>
</div>
</div>

You should be able to add the following snippets of css to your stylesheet to fix that.
In the mainstyle.css file, change...
#imgholder {
width: 950px;
margin-top: 0px;
padding: 0px;
margin-right: auto;
margin-left: auto;
to
#imgholder {
width: 950px;
margin-top: 0px;
padding: 0px;
margin-right: auto;
margin-left: auto;
overflow:hidden;

How to remove the Option "Only Refer Excise Invoice "from MIGO

Hello,
We are using the ECC 6.0. while suppose material is excisable then there are Four options will come in MIGO --Excise Invoice tab
1)Only Cature Excise Invoice
2)Only Refer excise Invoice
3)Only Part1
4)No excise Entry
As per my client requirement then only need two options in MIGO.
1)Only Part1
2)No excise Entry
Bcz they want to Capture and Post excise Invoice in J1IEX only...
I have tried from Tax on goods movementIndia-Basic settings--Excise Grp settings..... Here in MIGO settings we can remove the Click from "EI Capture"....Then we will not find the Capture excise Invoice in MIGO. Next How to remove the "Only refer Excise Invoice from MIGO..
Regards
sapman

Hi,
You can capture Excise Invoice w.r.t. PO in J1IEX and then refer it during MIGO (Note: - You are not capturing Excise Invoice again, only referring it) and then Post it in J1IEX.
And in case of Stock Transport Orders, you need to refer the Excise Invoice No at the time of GR in receiving plant which is posted in the Supplying Plant (via J1IIN) so that system will copy all the duties same as of that invoice and user need not to do any manual intervention.
Also in case of Imports, first you capture Bill of Entry w.r.t. PO in J1IEX and then refer it during MIGO and finally post it in J1IEX.

Urgent help: How to remove the accumaltion when show movies step by step with buttons

I want to show the movie step by step by clicking the next
button. Inside each frame, many movie clips are generated
dynamically at runtime, and they can be played interactively.
I achieves the step-by-step display of those frames by adding
another layer with the action stop(). But I got one trouble: all
the movie clips from previous frames are accumalted. How to remove
the accumulation from previous frames?
For the continuous display of the movie, I tried to use
onEnterFrame() and change the _visible property of all the movie
clips to false in this function. But it doesn't work for the
step-by-step display. Once I click the next button, the movie clips
at the current frame just show very quickly, then disappear. What
should I do?
I need to fix this immediately.
Your help would be greatly appreciated.
- zcx

you can use the removeMovieClip() method for those movieclips
added dynamically.

How to remove the pop-up window ''Wireless Radio Status" for t430s

Hi, I have owned my t430s for now about 2 years without any major complaints recently I've had to use the fn + f5 function quite frequently, because of my poor internet connection. so that way i can reset which signal I want to choose because the default signal I am connected to is not mine. My problem is similar to what is posted here: https://forums.lenovo.com/t5/X-Series-Tablet-and-Helix/how-to-remove-the-pop-up-window-Wireless-Radio-Status/td-p/1191059 I really want to get rid of the pop up for this feature, I've tried to follow what the other thread user's have done and try out their solutions but it does not work for my t430s i tried changing the pmev thing to what was posted in the thread. Can anyone help me? Thanks!

I already tried that as mentioned in my original post, it doesn't work. I still get the pop up message: this is me pressing fn + f5

Tecra R10 - How to remove the HDD?

Similar Messages

Maybe you are looking for