Tecra R840 - Ethernet and sound driver Dynadock issue

Hey,
Tecra R840, model PT429A-007004, does not work correctly with the Toshiba dyna dock.
Specifically, the Ethernet and the audio driver for the dyna dock is not installed after running either the driver install from the dyna dock cd or running the latest driver from the website.
Does anyone know a fix for this?
Note: there is nothing in device manager to say that these drivers for the dock a missing, only when installing the driver does the wizard mention that the Ethernet and audio drivers could not be installed.
It also mentions that the dynadock has an issue with the on board graphics card but we have not had any issues with graphics, i.e. screens.

Hey,
Sorry for the late reply.
That fix does not resolve the issue.
Manually adding the drivers removes the yellow exclamations marks and fixes the audio, but it does not fix the Ethernet connection. So, currently we have had to plug the Ethernet cable directly into the model of laptop mentioned above instead of the dock.
Firmware update has not helped.
Can anyone from Toshiba please test this and let me know their thoughts or perhaps a solution if found? It would be greatly appreciated.

Similar Messages

GS60 - Mousepad freezing/crashing and hard drive clicking issue

Hello all!
I'm going to try to put in as much detail as possible, hopefully some kind person here will know what I can do to troubleshoot these issues
I bought an MSI GS60 2PC Ghost notebook a month or two ago and I've been noticing some strange issues.
Occasionally during use, my mousepad will freeze for around 2 seconds and then start back up. What i mean by this is that i'll be swiping my finger and then the cursor will just stop moving for 2 seconds mid-swipe. This seems to happen fairly randomly multiple times a day.
The most annoying part is that the first time it happens after a fresh restart, the mouse seems to lose precision. Meaning that after the first freeze, if i do a quick swipe and stop, the cursor will lag behind a bit and fully stop movement noticeably after I stop moving my finger. It happened while I typed this.
>"REINSTALL YOUR MOUSEPAD DRIVER"
I did, it started happening again. Here's the thing. If I'm also playing music while using the laptop and mousepad, any music I'm playing will temporarily also slow down/ get distorted during that 2 second freeze.
Eventually, the mousepad will just crash altogether and I'll have to restart to get it to work again.
>"ARE YOU SURE YOU'RE NOT HITING THE MACRO TO DISABLE THE MOUSEPAD"
I'm sure. The music issue leads me to think it might be something else, not the mousepad driver. Although I should note this doesn't happen if i connect a USB mouse and use that instead.
I'm also hearing a weird clicking noise every so often. It seems to come from the bottom right hand side of the laptop when facing the keyboard top-down. Like, to the right of the mousepad. Could it be the HDD? It doesn't really bother me too much but it's pretty loud and people in class will often turn around thinking i'm taking a picture of them. It just happened as I typed this as well.
I've tried recording these things but they never happen with the camera rolling.
Anyone have any ideas? I'll shower you with free Steam games if the help you provide ends up fixing the problem.
Thanks in advance :cool:

Turn on the task manager and check if the CPU or HDD is having a high usage while the cursor freeze happens.
Try this:
Go to Control Panel> Hardware and Sound> Power options> change plan settings(choose the one you're using)> Change advance power settings> Processor power management> set 98%, 99% of on both on battery and plugged in.
Clicking sound for HDD is normal if the read and write head is working.
You can run the HD Tune's s.m.a.r.t test and see if there is anything wrong with the HDD, if not, then I think you don't really need to worry about the sound.

Re: Satellite L300-1A8 - SATA and sound driver

I had to change SATA from AHCI to compatible, because I wanted to install Windows XP on my L300. Is there any way to install SATA driver under existing OS?
And one more problem. I cannot install the sound driver.
Installation passes ok, but after restarting there is no sound or even installed sound card in device manager, and there is still by the PCI device.
Need help as soon as possible

> {quote:title=SoGood wrote:}{quote}well, first, I have tried to install WXP SP3 with integrated SATA drivers,but I got the blue screen after loading of drivers...I didn't pressed F6, mabe that was a problem...
Yes, that was the problem.
If you install Windows XP and you hade set the SATA mode to AHCI, you must press F6 to load the drivers.
Download the drivers and copy it on an external FDD.
But there is an other option. You can use nLite: http://www.nliteos.com
nLite is a tool for pre-installationd Windows configuration an component removal at your choice. You can also integrate the SATA drivers, Service Packs, etc. So must not press F6 and not use an external FDD.
By the way, it's normal when your laptop is a little bit slower, because the SATA drivers are missing.

Qosmio G10 Graphics and Sound driver installation

Hi
I have recently tried to reinstall my Toshiba Qosmio G10 after downloading all the latest drivers of the Toshiba site.
Unfortunately I have had my motherboard and display replaced over the last 3 years (under Warranty) , which means all the hardware has changed from the original laptop I bought (now has Graphics card ,NVIDIA GeForce go 6600, new chipset, etc, as far as i remember).
Does anyone have a system recovery cd or a place I can download the correct drivers for this laptop.
I am a sys admin, and technical and have spent about 5 hours pulling out my hair trying to get the video and sound drivers working.

Hi!
It is pretty easy to get drivers for a Toshiba notebook.
Did you search on Toshiba website?
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Search for Qosmio G10 and then you will find it.
Bye

DEAR FRIEND..PLEASE GIVE ME COMPAQ PRESARIO V3500 MODEL V3751AU AMD PROCESSOR AUDIO AND SOUND DRIV

DEAR FRIEND..PLEASE GIVE ME COMPAQ PRESARIO V3500 MODEL V3751AU AMD PROCESSOR AUDIO AND SOUND DRIVER

Hi,
This is all supported derivers from HP:
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3413040&lang=en&cc=us...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

G530 4446-3FG No Modem Driver and Sound Driver work from Support & Download Center

ping at all,
when i try to install the connex audio driver or even modem driver for my new 3000 G530 446-3FG Notebook an error appears with an error alert -> device not found...
Conexant Audio Driver for Windows XP
Conexant Modem Driver for Windows XP
has anyone an idea for me?
thanks in advice, daniel
Message Edited by webmove on 07-02-2009 08:56 AM

My issue was similar. I don't know if this will help but support did nothing for me either.
I had problems upgrading and had to install from scratch. The install appears to have created a new Download folder at install (same date and time). I could not access the folder nor could I see any permissions or view or change the owner. I ended up turning off uac and restarting. I deleted the folder and created a new one. No problem now. You might check any itunes folders created with the install for the same permission issue.

Tecra 9000 - Modem and Sound Board

I have a Tecra 9000 that had a problem a cople of months ago.
The modem wasn't recognized any more....
Since the problem was not important I didn't take any actions.
But now it is the sound board that stopped working.
It isn't recognized by the OS any more.
What seems to be happening? Software or hardware problems?
Best Regards
Paulo

Hello
Its not easy to say, what the problem is (software or hardware). First of all you can try to delete these two devices (modem, soundcard) from the Device Manager. After booting the OS should recognize the devices. Furthermore you can try to install the new driver for these devices. If this action doesnt help, you can try to reinstall your system with the Recovery CD.
Bye

Tecra A11 - Solid state hard drive boot issue

I have an A11 PTSE0A-088021 and am attempting to install a Kingston 64GB SSHD.
When I boot it is displayed in the POST and also in BIOS.
When in the Windows 7 pre installation environment the drive is displayed in "Where do you want to install windows". I can see the drive and the partition, delete and create a new partiton.
Message "Windows cannot be installed to disk 0 partiton 1. (show details).
Details > Windows cannot be installed to this disk.
The computers hardware may not support booting to this disk.
Ensure that the disk's controller is enabled in the computers BIOS menu.
I have checked drive in BIOS and seems to be in order.
Are there controller drivers required for this drive? Toshiba hardware or Kingston?
Does anyone know of a controller driver needed as I have searched the web and cannot find controller driver for this drive.
I didn't think there should be any drivers required to install windows to a solid state drive but there must be something out there. Assistance appreciated.

Update.
Ran recovery cd's and recovery proccess appeared to complete successfully but when rebooted after completion OS still fails to boot. Message is "Insert system disk in drive. Press any key when ready..."
From what I can gather researching other forums it appears the sata controller driver is missing or corrupt.
When I boot to startup repair console from the windows 7 cd it states windows found problems with your computers startup options. Do you want to apply repairs and restart?
Repair details:
The following startup options will be repaired:
Name: {bootmgr}
Indentifier: {9DEA862C-5CDD-4E70-ACC1-F32B344D4795}
The following startup options will be added:
Name: Windows 7 Professional (recovered)
Path: Windows
Windows Device: Partiton=C (49626MB)
A copy of the current boot configuration data will be saved as: D:\Boot\BCD.Backup.0002
Repair and restart
Failed to save startup options
If I click add drivers and browse to computer I see
S3A8345D003 (C:)
System (D:)
Boot (X:)
When I reboot I get same error as stated above "Insert system disk in drive. Press any key when ready..."
If I boot all the way to the Where do you want to install windows? Windows cannot be installed to Disk 0 Partition 2. (Show details) Windows cannot be installed to this disk.... as mentioned in first post.
It looks like the recovery cd set I created did it's job and created the new partitons as per factory recovery.
Disk 0 partiton 1: System 1.5GB System
Disk 0 partiton 2: S3A8345D003 48GB Primary
Disk 0 partiton 3: HDDRECOVERY 9.7GB Primary
Also ran commands from command prompt
bootrec /fixmbr completed successully
bootrec /fixboot The volume does not contain a recognized file system.
Please make sure that all required file system drivers are loaded and that the volume is not corrupted.
bootrec /rebuildbcd Successfully scanned windows installations.
Total identified windows installations: 1
[1] C:\Windows
Add installation to boot list? yes(Y)/No(N)/All(A):
Type Y for yes.
The requested system device cannot be found.
The only solution I can see is to install the latest sata controller for this model A11.

Yosemite and iCloud Drive Performance Issue

While on my home network that is connected to the Internet over FiOS 50 G bps, I upgraded my Mac Book Pro Retina from Mavericks to Yosemite. The upgrade went smoothly.
I first noticed that when I boot my Mac Book, it boots slower like Windows...
When I took it into my office and used a slow WiFi hot spot, the system crawled. Safari, Google, and other apps barely responded.
During the upgrade, I "blindly" selected to use the iCloud Drive.   Foolish me!   I tried to turn it off, but then it warned me it would delete all documents on my Mac that are also stored on the iCloud.
How do I turn iCloud drive completely off when I don't want to use it and KEEP all my local files???    Later, I'd like to turn it back on when I'm on my faster network and THEN sync everything.
Also, I started turning off specific Apps and rebooted. Performance has improved.
Regards,
Nick

But Is there an option to retain copies of the files that have been stored on iCloud?   I don't want to delete them.   Later, when I connect back to iCloud drive, if I have made any changes on any of these files on my Mac and they are newer than the version up on iCloud drive, it will automatically "sync up".....
Thanks again,
Nick

Tecra 9100: Yamaha sound driver issue

H
Ive just formatted my hdd and installed WinXP Pro.
Ive installed all latest drivers but Im having trouble with one; sound driver for the yamaha ac device.
I keep getting the yellow mark next to it.
So I have tried uninstalling it but when I reinstall it I get cannot start code 10.
Its the latest driver so I dont know whats causing the problem.
Can anyone shed any light on the subject, thanks rob

Hi
The issue is known to me.
The sound driver is simply not compatible with the Win XP SP2
The Yamaha AC-XG driver uses PortCls function for checking the operatingsystem version. XP Service Pack 1, PortCls function is changed, then the Yamaha driver cannot get operatingsystem version correctly. This issue also happens Windows XP SP2.
Yamaha already provides the fixed driver. The fixed driver version is the following;
yacxg.sys 6.13.10.2152 with software synthesizer
yacxgc.sys 6.13.10.3152 without software synthesizer
Greets

Compaq presario f750us sound and dvd drive issues

i have a compaq presario f750us runnin windows 7 ultimate 32-bit when i first turn on the machine the sound and dvd drive work correctly but after about a hour of it being on both devices stop working an they dont appear in device manager.

Have you looked at your AutoPlay settings?
what is autoplay: http://windows.microsoft.com/en-us/windows/change-autoplay-settings#1TC=windows-7
FAQ tutorial: http://windows.microsoft.com/en-us/windows/autoplay-faq#1TC=windows-7
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Tecra 9000: After SP2 installation the Yamaha sound driver does not work

Hi,
I own a Tecra 9000, with a Yamaha AC-XG sound card.
The problem is that since I installed Windows XP with SP2 included, I lost my sound.
I know also that Toshiba is aware of this situation and they have managed to post a solution for it. I've tried this solution:
Detail:
The Yamaha AC-XG driver uses PortCls function for checking the operatingsystem version. XP Service Pack 1, PortCls function is changed, then the Yamaha driver cannot get operatingsystem version correctly. The operatingsystem provides the version for Windows 95. Therefore the Operatingsystem has a blue screen. Therefore Microsoft added the workaround and illegal drivers are blocked from working on SP1. This issue also happens Windows XP SP2.
Yamaha already provides the fixed drvier to Toshiba. The fixed driver version is the following;
yacxg.sys 6.13.10.2152 with software synthesizer
yacxgc.sys 6.13.10.3152 without software synthesizer
How to fix this issue:
Install the fixed driver on a system before/after installing Windows XP Service Pack 2.
Install steps:
(1) Unzip an attached file on your hard disk.
(2) Run SETUP.EXE
(3) Click the Next button.
(4) Choose "Yes, I want to restart my computer now" and click Finish.
A toshiba engineer told me that first of all I needed to install the old driver "5.12.01.3141", and it worked out ok, but still no sound.
And then he told me to install the version "6.13.10.2152", but this went wrong. I've got the error message "Driver was not installed".
I already tried lots of different drivers, including generic and yamaha drivers.
Please tell me a good solution for this issue if possible.
Thank you very much,
Hugo

Hi Hugo
It seems today is your lucky day ;)
Thanks to Toshiba because the Toshiba computer knowledge base is a really useful area and I have found many useful document and solutions!!!
I found also a solution for your tiny issue ;)
As you said the problem is the Microsoft service pack 2. The sound driver makes some troubles after the installation of SP1 or SP2 and therefore the update is necessary!!!
Please take a look here:
Windows XP Service Pack 1a or Service Pack 2 incompatible with existing Yamaha sound driver
http://ftp.toshiba.ca/support/techsupport/tsbs/all/-TSB000805.htm
Good luck

Tecra M2 PTM20A-002T2 - Need ethernet and display drivers

Please help me with an answer!
I have spent hours chasing files and installing different stuff.
Got my sound working but still need ethernet and display drivers I think.
I am online for about 15 minutes and back on tonight.
Thanks, Nay,
Melbourne, Australia

Hi Nay,
Alternative have a look on the Toshiba European page. There I founded a similar model, Tecra M2 PTM20E, and I think the downloads should also work for your model:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Furthermore you can see an installation instructions document for Windows XP. Its a list for the recommend driver installation order, tested by Toshiba. :)
Last but not least you can identify the hardware using hardware and vendor ID. Therefore check this article:
[How to identify an unknown device (e.g. Wireless LAN module)?|http://aps2.toshiba-tro.de/kb0/HTD0302U00000R01.htm]

Creative Sound Blaster Audigy ZS And Vista Driver installation prob

HI!
I encounter Installation problems with that file:
Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
Thanks!
Julien

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

Tecra S11 - nVidia or RealTek sound driver. Which one do I install?

Tecra S11 nVidia vs RealTek sound driver - which one do I install?
I've installed nVidia and realtek sound driver also. I've got BSOD when I plug in 3.5mm jack headphone. When I want to listen music with my Bluetooth stereo headset I also got BSOD.
I reinstalled nvidia and realtek sound drivers. My Tecra S11 is very slow since I installed latest nvidia video driver from nvidia website.
Windows 7 very very slow since then. Firefox start up time sometimes 20-30sec

Hi petersm,
The sound card of your notebook is a Realtek one so you have to reinstall the Realtek sound driver that you can download on official Toshiba website.
But as MisterX wrote you should also reinstall the Bluetooth driver because the tosrfsnd.sys file belongs to BT driver so its worth a try ;)

Tecra R840 - Ethernet and sound driver Dynadock issue

Similar Messages

Maybe you are looking for