Tecra R840 installing mSata SSD in position of 3G module

Hello,
i have a Tecra R840-110 model, there is also 3G module inside, i would like to install the mSata SSD in the pcie slot.
Is possible to use the mSata SSD in the pcie slot instead of 3G module?
Thank you for your help!

I think something like this is not possible. Mainboard ports are not some kind of flexible ports.
In the past Toshiba has offered second HDD upgrade in place of optical disc drive using special adapter.

Similar Messages

  • X230:Has anyone tried to install mSATA SSD as cache?

    Hi
    I want to install a third party mSATA SSD as cache to work next to my 320gb HDD.
    I'm posting this thread as a new subject to my unresolved subject here.
    If you've tried to do something similar with your mSATA SSD and succeeded (or even if failed), please share your know-how experience here.
    Thank you
    Mike

    During installtion I got error
    Check complete. The overall result of this check is: Failed <<<<
    Problem: Oracle Database 11g is not certified on the current operating system.
    Recommendation: Make sure you are installing the software on the correct platform.
    ========================================================
    Checking service pack requirements ...
    Check complete. The overall result of this check is: Not executed <<<<
    OUI-18001: The operating system 'Windows Vista Version 6.1' is not supported.
    Recommendation: Install the recommended Service Pack.
    then I check the boxes(user defined)
    Installation is done.
    After installation I got tns listener error
    then I tried these steps to fix the error and its working fine
    On cmd prompt
    set ORACLE_HOME=c:\oracle\ora11g
    path=c:oracle\ora11g\bin;(path should contain bin folder)
    set ORACLE_SID=orcl
    set system environment variables also
    restart pc
    tnsping orcl
    Add one line to the WINDOWS/SYSTEM32/DRIVERS/ETC/HOSTS FILE
    IP_address hostname.domainname hostname
    LISTENER.ORA
    make sure host name is correct
    tnsnames.ora
    sqlnet.ora

  • T440 install mSATA SSD

    I am the proud new owner of a ThinkPad T440 and a separate SanDisk mSATA SSD. Sadly I just can't figure out where to install the SSD. The hardware maintenance manual says something about NGFF, but when I called Lenovo before ordering my laptop, I was told that I want mSATA, not NGFF as a format, so I bought an mSATA SSD.
    So, can anyone point me to a manual or tell me something I have missed?
    /* no comment. */
    Solved!
    Go to Solution.

    MadTux wrote:
    So my mSATA SSD is the wrong format!?
    Yes.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Installing mSATA SSD as secondary drive in Lenovo A730

    Hi:
    I purchased a new Lenovo A730 desktop all in one pc this week.  As everyone knows, it only comes with a 5400 rpm HDD. That of course is really slow, which I anticipated. Fortunately, it comes with an empty mSATA slot. Therefore, following the advice of others with this otherwise wonderful machine, I purchased a 128 GB SSD drive to install into the mSATA slot. Done.
    Using Macrium Reflect Disk Imaging, I cloned the hard drive onto the SSD drive.
    Done.
    I changed the boot order.
    To test that I could actually boot from the SSD drive, I unplugged the hard drive, it booted from the SSD Drive. Phew.
    I plugged back in the hard drive. Rebooted. It booted from the SSD drive, so far so good, I go to partitions to then attempt to delete the hard drive. The hard drive does not show up.
    It does show up in the BIOS. However, it does not show up under disk management. Nor does it show up under Macrium Reflect Disk.
    However, interestingly, if I revert the boot order so that the Hard Drive boots first, then of course it boots from the hard drive and everything shows up again. If I change the boot order so that it boots from the SSD drive, no more hard drive.
    I really would like to boot from the SSD Drive, delete the hard drive, and use it as storage, but I cannot seem to cure this problem.
    If anyone has a solution, I would really appreciate it.
    Thank you.
    dbw
    Solved!
    Go to Solution.

    hi dbw,
    Booting from mSATA SSD, can you try to use the diskpart utility or EaseUS Partition Master to view the connected drives.
    DiskPart Command-Line Options
    Diskpart Command-Line Utility
    If same problem, consider using Paragon Backup & Recovery 12 Home free trial (complere guide here) to migrate the OS, drivers, etc from the HDD to the mSATA SSD. When done, set the following in the BIOS and configure it to boot from the mSATA SSD and observe.
    Security Tab
    Secure Boot = Disabled (if applicable)
    CSM = Enabled (if applicable)
    Exit Tab:
    OS Optimized Defaults = Other OS / Disabled (if applicable)
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Can we now install mSATA SSDs in our US X230s without voiding the warranty?

    So it had been discussed before on this forum that installing a mSATA device on an X230 was a warranty voiding action (the part was listed as CSU instead of FSU).  And we in the USA had no option to have one installed at all.
    Now on Lenovo's site when I try to configure an x230 it says that you can order a mSATA compatible one under the different screen options.
    I ordered a week or so ago, but does this mean we can now install them without voiding warrnaties?
    Anyone from Lenovo have an opinion on this?
    Solved!
    Go to Solution.

    Tout1108G wrote:
    Hey there Coronadoisdead,
    I would advise against installing the mSATA at this moment, as it may void your warranty. I assume you will be wanting to install this via the mini PCI-e slot available in the X230. In this installation a Field Service Only part would have to be removed to do the installation according to the hardware maintence manual page 70 (page 76 when navigating adobe reader). The palm rest, keyboard and battery pack will need to be removed, and the palm rest is the field service only part.
    Now, there may be other options that we can look at to ensure you don't void your warranty. If you will, please private message me your serial number for your machine (if you have received it), so that I can take a look at your specific warranty information and see all what it covers. I'll be back in touch as soon as possible after your private message.
    Thank You,
    George
    I respectfully disagree. Removing an FRU will not "void" the warranty unless the manufacturer (in thise Lenovo and not an independent (non-Lenovo owned but authorized)) determines that the modification (in this case removing the palmrest) caused or significantly contributed to whatever failure occurred.
    In addition, since the mSATA is available in the rest of the world without any other modifications by Lenovo, Lenovo cannot legally claim that the mere presence of a mSATA is sufficient grounds to deny warranty service.
    That said, this is the law and in practice it may be different. A Lenovo repair shop may incorrectly refuse warranty service (or even incorrectly use the term "voiding the warranty") and the customer may be left to resolve this issue in small claims court where they would prevail (but is it worth the hassle?)
    As I've always said, be prepared to pay for any damage that your mods may cause and be prepared to educate people on the differences between "voiding the warranty" and refusing warranty service on a specific failure.

  • Tecra S5 PTS53E - mSata SSD compatibility

    hi all ,
    i have a Toshiba Tecra s5 PTS53E ,
    i want to know if mainboard on my laptop suport msata card , inside of laptop , on the mainboard close of hdd is an slot who like a mSata slot but i'm not sure ,
    is nothing write there who can guide me ,
    how. identifies him ? (Excuse my English)

    in the top of laptop , under the keyboard is find a Bt and wireless lan
    http://s13.postimg.org/iz1w8k1yv/DSCF9166.jpg
    Hwinfo report that i have 2 port sata , but only one is ocupied (with my hdd sata ).... Isn't strange ?
    http://s14.postimg.org/52ndc0bs1/Untitled.jpg
    Hwinfo report:
    sata controler is capable..................... Interface Speed Supported: Gen2 3.0 Gbps
    - is known as a mini-PCI is identical mSATA like. but different in controller....
    -distance between port and screws is great, as for mSATA.
    - for .mini-PCI know is how small
    The question is.. is or not is mSata....? escuse my english

  • Adding an mSATA SSD to an X230

    I gather in some parts of the world you can get an X230 with an HDD and an SSD (in place of the WWAN adapter) from the factory, but not in the US.  So, I'm thinking of doing it myself.  My plan would be to add the SSD before installing any of my own s/w, then move the OS from the HDD to the SSD with something like this (http://www.paragon-software.com/technologies/components/migrate-OS-to-SSD/).  Set the HDD to unbootable in the BIOS and I'm pretty much done.  I'd be interested in hearing comments from those who've done this, or who might have some advice even if they haven't.  Thanks.

    Involute,
    you can clone HDD on msata SSD using some sw like Acronis or Intel (free of charge tool if you use msata SSD from Intel). Install msata SSD, install smth cloning sw on HDD and do it. This solution is better if you have fully installed and tuned system.
    If you want to get the system like from the factory just make a Factory_Recovery media, remove HDD, insert msata SSD and launch new image installation. Then insert HDD.
    In both case you'll get all 3 partitions on both drives. Then repartition them for youself. You can even delete Lenovo_Recovery partition on system (msata SSD) drive as you have recovery media.
    Do not forget to change the boot priority within BIOS setup.
    Note, for installation R&R on 2nd drive with installed on another (HDD) drive it'd be better to remove HDD from the bay temporary. After installation you'll get a system with working blue button.
    x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
    x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
    Do it well, worse becomes itself
    Русскоязычное Сообщество   English Community   Deutsche Community   Comunidad en Español

  • Which mSATA SSD's are compatible with IdeaCentre A730

    Want to install mSATA SSD as primary drive in my IdeaCentre A730 AiO.
    I wonder which mSATA drives are compatible with my AiO.
    I read som issues with Samsungs 840 EVO mSATA SSD.
    Who can help?

    hi Polleke1952,
    Thanks for Posting!
    The only issue I have looked at with the Samsungs 840 EVO mSATA SSD. is Hardware not show on Device Manager, I would say that this is not a Hardware specific Issue but More of a Windows concern. 
    Where an MS Hotfix would resolve.
    For a straight forward Answer
      The Samsungs 840 EVO mSATA SSD or Any other Msata SSD will work on the system.
    Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Tecra R840 - Need help with SSD installation

    Hello,
    sorry again, but I really need some help with this?
    My new ssd (arriving in a couple of days) is a Plextor M5P which is 7mm thick! My Tecra R840-16J have a 9.5 mm thick hdd and for what I saw there is no caddy!
    I would appreciate all the tips to install the ssd in my Tecra!
    Thanks for you time,
    paulo

    Hello Paulo
    As far as I know some models are offered with HDD and some with SSD these models offered with SSD have small SSD holder. SSD is fixed with 4 screws into this holder.
    I really dont know how to help you now. Maybe you should contact nearest Toshiba service provider and ask for help. I think they can check part number of this holder or maybe order one for you.

  • Can I install a mSATA ssd in my HP ENVY 17t-k000 CTO Notebook PC?

    Can I install a mSATA ssd in my HP ENVY 17t-k000 CTO Notebook PC? Added a 250 gb SATA sdd and 8 gb memory chip today but could not find any way to also add a 250 gb mSATA sdd. I looked on the front and back side of the system board.
    Should I return the Samsung 840 EVO mSATA SSD I bought from Newegg?
    This question was solved.
    View Solution.

    The Service Manual is no help whatsoever. It says an M.2 mSSD is supported on "select models" but there is no picture of it in the Manual or indication where it is on the "Select Models". Those that do have it use an M.2 version (three connector prongs not 2) so your 840 Evo would not work even if you had one of the "Select Models". I believe on those that have it the M.2 port is right on the motherboard so if you do not see it there you are not among the select. 
    Manual, FWIW
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • Can i install a 32gb msata ssd drive on my hp envy 6 1002tx laptop?

    can i install a 32gb msata ssd drive on my hp envy 6 1002tx laptop?
    Is their any msata port in my laptop motherboard?
    is their any problem by installing msata in my laptop?

    Hi,
    Please check the following documnet to find down a slot on the system board because this is an option:
       http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c03282148/c03282148.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Can I install an SSD (mSATA 3.0) in HP dv6-6190?

    can I install an SSD (mSATA 3.0) in HP dv6-6190?

    Hi,
    Based on the following link, no, it does not have mSATA slot:
       http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c02863104
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • G500 - Is it possible to install a mSATA SSD drive?

    Hi!
    I am interested in the Lenovo G500 i7-3612QM and I would like to be able to install a mSATA SSD drive on it.
    I have read that these drives can be installed on a PCI Express Mini Card slot, and according to the Hardware Maintenance Manual (p. 29) the computer has two of these slots:
      -Wimax/WIFI  x  1
      -SSD  x  1
    The problem is that, although the Wi-Fi slot is easily visible (it appears in a picture in the manual, p. 45), I can't find the second slot, neither in the manual nor in the picture of the inside of the notebook I found in this web (The text is in hungarian, but I haven't been able to find any other picture).
    Does anybody know if the second PCI Express slot really exists, please?
    Thank you very much!

    Hi MestreKaito,
    Welcome to Lenovo Community Forums!
    I’m sorry to inform you that the Image is un-available for the second slot; I would Strongly Suggest Calling Technical Support for Assistance. Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
    Do post us back for further queries.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • DV6-7014nr Help me Install a mSata SSD in it!

    Guys, I bought a mSata 128GB SSD to give my DV6 7014nr a little perfomance boost, but I need help instaling it!
    I never dissassembled a notebook before, so I don't know even where to start!
    Do you guys have a video tutorial, or a manual on this?
    Thanks!

    FelipeRRM wrote:
    Oh god, I was thinking of using the mSata SSD as a regular drive, and installing the OS and some programs on it...
    What has to be done about it?
    Hi,
    This:
    http://forum.notebookreview.com/hp-envy-hdx/729085-envy-15t-j000-msata-ssd-hdd-fresh-install-msata-b...
    or
    http://en.community.dell.com/support-forums/desktop/f/3514/t/19516805.aspx
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • Tecra R840-116 - Type of SSD

    Hi,
    there is a 256 GB SSD in the Tecra R840-116 Notebook. I would like to know the manufacturer of this SSD. Does someone know which Type of SSDs Toshiba uses in its Tecra Notebooks?
    Thanks,
    Flo

    Could confirm if the Tecra R840 has a sata 3 ( 6Gbs ) connection.
    I just replace my HDD by a Samsung SSD Serie 830 and it should perform at 500Mb for reading and it is only performing at 200Mb/s ( as if it was a Sata 2 connection ) ?
    What speed with HD Tune did you get with the genuine SSD from Toshiba ?

Maybe you are looking for

  • Same sequence value for multiple targets

    Hello In my mapping, I have 4 target tables. The primary key of the first table is filled by a sequence. Now I should use the same value to fill in the 3 other tables. I was trying to use the sequence in the joiner and in the splitter but when I vali

  • Append structure

    hi , i am getting an error message while am creating an append structure. what i have done is .. i created a structure in SE11 with 4 fields with name zstruct . and i have one ztable with 5 fields. when i am trying to append  a structure through Appe

  • Page item display 32767 characters (via computation)

    Hello everyone, Running APEX 3.2.1.00.11 I am trying to generate values for a page item using a PL/SQL function body. It parses and concatenates many rows of our databases. In one case I need to return some generated javascript code to pre-load a aut

  • Fault in house or not?

    Removed re posted

  • For a READ TABLE how to build a dynamic WITH KEY condition?

    Hi All, I have a Z table with 6 fields. The first field is the Plant and is the key field. This field can be matched with the field from selection screen. Now I have 4 character fields which can contain various values. Now I have another field at the