Tecra S10-106 - 3G driver for Vista Ultimate 64bit

Hello,
I am owner of a Toshiba Tecra S10-106. Due to the fact that Vista Ultimate 64bit is much faster as Vista business 32bit, I would like to use Vista ultimate 64bit as operating system, but I can't find the 3G driver for Vista 64bit. All drivers can be downloaded from USA in english and can be used in german, only the 3G driver is missing. Can somebody else send me a download link or tell me where I can find a suitable driver for Vista 66bit?
Thanks in advance.

Hi
To enable the card you will also need to install the 3G RF Power control utility which is here at http://support1.toshiba-tro.de/tedd-files2/0/3grf-en-20090217134719.zip.
That is only half the story as I think you also need to install the Value Added Package here http://support1.toshiba-tro.de/tedd-files2/0/vap-en-20090217134137.zip as this then enables the hotkeys to turn on and off the 3G wireless card.
Hope that helps.
Regards
Phil

Similar Messages

Premiere Pro CS4 eats my C: drive in Vista Ultimate 64-bit SP1

I installed Premiere Pro CS4 this last weekend 11-12 April 2009.
I have a Quadcore 3.0GHz with 8Gb of RAM, a 150Gb C: drive fo rthe op sys Vista Ultimate 64-bit SP1 and programs, a 500Go D: drive for general data and a K: drive 2Tb RAID0 volume useable about 1.8Gb.
My C: drive was healthy after installation of Premiere Pro with tens of gigabytes free at least. Then I started experimenting with building projects. I put my files on a mix of the D: and K: drives especially the AVCHD video assets on the K:.
While importing these AVCHD assets I eventually got a message from Vista that the C: drive was full and I did a clean up and that gave approximetely 30Gb free, I went back to importing, in a couple of hours the 30Gb was gone, this can only be Premiere Pro CS4 eating the C: drive and never returning what it takes. This of course is a disaster precisely because it is my op sys drive and Vista will periodically want to make new restore points especially before applying downloaded updates from Microsoft. I ahve run also chkdsk and defragmenter with no effect. I think Premiere Pro is using some sort of secret work files on the C: drive somewhere and that they just accumulate, of course this would be a bug.
Support Center does not appear to let me open web support issues even though we are in the 90-day bug fix period and I have registered the product with the product key so that is another bug that gets in the way of fixing the first.
Any ideas please?
Thanks!
Peter.

Yeah, I did not take backups that often cos I did not intend putting the machine onto the net, then I got this device that said it would protect against everything by isolating my machine and making it invisible, I await the analysis by the company but it does appear not to have worked, the only thing that works is very real physical isolation and do not use the internet at all from the main machine. Like I say it simply is not confirmed yet but neither is it denied. You cannot actually go so far as to blame Adobe because stopping hackers is the job of the op sys vendor really so I blame Microsoft, the only blame for Adobe is the policy that some functions require internet connection in order to work when they know internet is not secure, so for instance if you want to use the emulators for things like these mobile phones they want you to be connected, I tried that one phone emulator and it said so, I wish they just put all documentation and all software on the DVD. I can roll back to an earlier Vista version from a USB backup disk that is always powered off, then rebuild as necessary, but I want the security firm to see if it is a trojan in fact first and to see if it can upgrade the security device and provide a roll out of the trojan's work. Right now I am still scripting the documentary and this second quarter is getting this Premiere Pro up ready for third quarter production so I can be philosophical for now, but yes later I will get more disciplined. But at least now I (almost) know the security device is not the all singing wonder they said it was. Oh well. I use a second machine too, a PS3 with Linux, that is what I am using now, this one doesn't seem to get hacked even though it is my sacrificial machine.
Message du 16/04/09 14:21
De : "don solomon"
A : "JONES Peter"
Copie à :
Objet : Premiere Pro CS4 eats my C: drive in Vista Ultimate 64-bit SP1
Adobe deserves criticism for its shoddy QC, but not for maing you exposing your main machine at risk on the internet. I never do that, and I never have had a virus or malware on it--never in all the years I've been doing this. I have picked up a few on my internet machine, though, but they are easily fixed with the security scheme I use.
As for restore points possibly eating up disk space, which you alluded to earlieranother never for me. Restore points are a half assed measure at best. My security system is a full clone backup of my C drive starting the day I install and OS on it, and every time I add add a program, and every day when I am working a big complex project. Otherwise, once a week. It takes a few minutes only. That way I can restore everything in equally few minutes should anything bad happen, like poorly designed software affecting other software, a virus, malware, etc, and including drive failurewhich has happened twice over the years.
Don't get me wrong, a virus checker is very useful to a point, but real security design has to start long before you install one, especially if your machine is the heart of your business, as it is for me. What is that old saying? An ounce of prevention is worth..........
>

Still no working driver for Vista

Heck, at this rate we may be up to RC or RC2 before a working driver is released. I stated in another post that I would not post anymore on this board until a working driver for Vista was released, but was shocked to see that the driver for my Audigy 2 has not been updated and the release schedule still states TBA!!!
For those who are interested, the Vista Transformation Pack #4 provides the best of both worlds. A very similar look to the Vista GUI and the updates, drivers and support that Windows XP offers.
Honestly, why spend over $00 for a sound card and then lose most, if not all, of its functionality just to say that you are running Vista. I know that Vista is neat, but it is a resource hog and who wants to use their motherboard's onboard sound?

Actually the latest Audigy 2 ZS driver for XP works on my Windows Vista Beta 2 build 5456.5.
I've since reactivated UAC, but not driver signing since several drivers are unsigned.
But disabling UAC got my whole Audigy 2 ZS Platinum Pro Creative cd installed, with the exception of the DVD-Audio Player. I then installed all the software updates (except the DVD-Audio), and then the latest driver for XP and the AudioConsole that is part of the install. I did need to run the driver setup twice and let it reinstall AudioConsole over the one it installed the first time.
All works except Soundfont Banks. They don't load, the Soundfont Bank Manager will keep trying to if I start it, but it's a no go. Windows uses only the Microsoft Roland Midi Synth (but it works).
All EAX stuff in AudioConsole works. The software from the cd works too, but since alot isn't being used they're mostly useless. I just use Windows PlayControl and Creative AudioConsole to control stuff.
There's a problem with Windows Media Player where visualizations only play with cd's, but not mp3's from the hard dri've. If I toggle the Audio Quality from, say, 6/44,000 to 6/48,0000 (where I leave it), then the visualizations will show for one song then deactivate again. Kind of given up on it as I'm not about to toggle that and reset everything for every song.
Haven't messed with MediaSourcePlayer yet, except to open it and turn off all the remote control stuff.
Played some games, some music, some DVD's. Stuff sounds fine. When I plug in my headphones it switches my 2. speakers off correctly.
I did need to install PowerDVD 6 Deluxe to get commercial DVD's to play. (Adult movies played fine as they're not copy protected.) Weird DRM error in WMP when it tries to play normal Hollywood DVD's. But PowerDVD plays them fine. The PowerDVD 7 Upgrade removes 6, then fails to install. So I needed to reinstall 6, then update it to 2003e again. It works.
So, it'll be nice to get drivers and software that completely work but until then the XP drivers and most of the software does work.

Compatibility of graphics driver for vista with xp

I have a HP Pavilion a6320in desktop. It came installed with Vista OS. I have now installed Win XP. Will the graphics driver for Vista: NVIDIA GeForce 6100 nForce 420, 6150 LE, 6150SE nForce 430, 7100/NVIDIA nForce 630i and 8200, also work for Win XP?
This question was solved.
View Solution.

luit wrote:
I had simply pasted the name of the graphics driver from the HP download page, that's why the names of all the differing devices appear.
I had replaced the original motherboard MCP61PM-HM (Nettle2) with ECS GeForce6100PM-M2. I tried installing winXP, but the graphics were hazy and performance very slow. Somebody suggested I need to install the graphics driver. Will the graphics driver you suggested work?
OK.
Now that is new information that you should have shared earlier with us.
You need to use all of the drivers that are available at the ECS website for the ECS GeForce6100PM-M2 motherboard. Do not use the HP drivers for the replacement motherboard.
FYI ..Once you replace the motherboard with a different brand than delivered your desktop PC ceases to be an HP desktop PC.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Can I copy & install "ipod touch App Pack 4A93" in vista ultimate 64bit

I am to do a clean install of vista ultimate 64bit. This is a move from my present vista Home Premium 32 bit.
All my purchase for for the ipod touch have taken under vista 32bit and details are stored in App Data->Roaming->Apple Computer->iTunes->Mobile Applications->ipod touch App Pack 4A93.
Now when I do a clean install of my latest OS vista ultimate 64bit I will have to wipe clean of the drive and it will erase my "ipod touch App Pack 4A93" aswell. I have saved that in a usb key to copy that back in the correct folder. Now my question is can I copy that back in VISTA 64bit and will it recognise my previous purchases for my ipod touch?
Has anybody know it for sure?
Thanking you in advance for your help and assistance.
Snow

Hello.
I am not sure if the Vista 64 bit will know the folder and App pack or not. But some of the other methods of backing up and getting Apps back you purchased are below. I am not sure about the UK but I know in the USA when you purchase an App you can download it again for free without having to buy it again.
How to redownload purchased applications from the App Store
http://support.apple.com/kb/HT2519
Copying iTunes Store purchases from your iPod or iPhone to a computer
http://support.apple.com/kb/HT1848
How to back up your media in iTunes
http://support.apple.com/kb/HT1382
Back up your iTunes library by copying to an external hard drive
http://support.apple.com/kb/HT1751

PDF Printer not working with Acrobat 8 & Vista Ultimate 64bit

I have not been able to print pdf's. I am uptodate on upgrades and have installed, reinstalled printers and repaired the program etc.
When I install an adobe printer I get the Adobe PDF Converter. When I try to print with it, I get an audible failure signal and nothing ever happens. Sometmes I get a sceen indicating it has failed, sometimes not. I have had this problem since upgrading to a new computer with Vista Ultimate 64bit OS.
I have seen various "Fixes" but none seem to address my problem or work for it.
Anyone with the same problem and perhaps a solution?

What version of AA8?

Cannot install Vista Ultimate 64bits on Mac Pro 2008

Hello,
I'm trying to install Vista Ultimate 64bits on my new Mac Pro (2008, 2x Quad Core, 3x 500GBHDD, 16 GB Ram), but Vista is unable to find a correct partition type.
The first thing I did was to install a 4th HD, and I constantly received an error 0x80004005 which seems to be too generic.
Then I tried to install it on the 3rd HD (Bay 2 is where my OS X startup disk is located btw) but here no way neither....Windows cannot find a valid partition.....
I tried to partition it manually in MBR...same problem....
Then with BootCamp assistant...same problem...
I also tried to use Vista Business 64 SP1, same problem...
Do you have any idea ?
Thanks,
Patrick

Hello,
Thanks for your answer, but unfortunately I'm still stuck...
To resume the situation :
I put a brand new 250GB SATA in the bay 4.
I start Bootcamp Assistant and tell him that I want to use this new disk for Windows and then start Vista x64 install.
Vista sees 2 partitions on this new disk :
Disk 3 Partition 1 : 200 MB (Primary)
Disk 3 Partition 2 : 230 GB (Primary)
If I try to use the P2 for the install, I have to format it first. Once formatted, Vista says : This computer's hardware may not support booting to this disk. Ensure that the disk controller is enabled in the computer's BIOS menu.
If I try to use the 200 MB (just for fun..), then I also have to format it, but here I receive the error message 0x8000xxxx
So clearly I'm lost...
Could it be related to the 16 GB RAM ? Too much for Vista ?? I don't believe as this is Vista x64...
Thanks for your help, ideas..
Patrick

CS4 on Vista Ultimate 64Bit, and XP-Pro 32Bit

I have CS4 Production Premium installed on a drive with XP-Pro 32Bit. Is it OK to point a new installation under Vista Ultimate 64Bit to the same Directory where the first Version is installed under XP-Pro?
I don't want to install the CS4 Suite twice on the same Hard Drive.
suggestions Please,
JJ

Thx Bob, I do have however 6 Hard Drives and each Win Version is installed on a different one and so is Adobe CS4 on a different separate Hard-Drive.
Why can I not point both Windows to the same Program folder???
why XP32, because I'm a chicken and want to make sure 64Bit works fine.
Thank you 4 now,
JJ

HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit

Dear
I need
HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit
can anyone provide me ? no links to read text, direct solution is welcomed
thanks in all

Hi.
You may download the Universal Print Driver PCL5 below, it is compatible with both Windows 7 or 8 64-bit.
For USB select Plug n Play, for network select Tradiotional Mode and follow the steps by setting a TCP/IP Port with the IP Address of the printer:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=29790&spf_...
Please let me know of any issuesm
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

TEMPRO is not working for Vista Ultimate x64

Hi
I have a Qosmio F50-10K and I installed Vista ultimate x64 and the Tempro appliaction is not working. After I install it, I left the Start Tempro button checked and when I press finish it gives me this error:
"internal error 2753
Toshiba.ui.controlpanelapplication.exe"
Same thing happens when I uncheck the box with start tempro.
For both situations nothing is left in the system, no files, no regstry, nothing.
Please HELP
Thank you

Hi!
I searched on the Toshiba download driver page and I found out, that Tempro is only available for Vista 32bit, not for 64bit.
So I think Tempro will not work on a 64bit OS.
Bye!

Mass Storage Controller driver under Vista Ultimate on Satellite A200

Hi I installed Vista Ultimate and the driver for Mass Storage Controller was not found. I tried to solve the problem as discribed here: Link: [http://support.toshiba-tro.de/kb0/TSB57014E000QR01.htm] But I could not find the driver on the Recovery DVD (Vista Home Premium).

Hi
You will be not able to find this driver on the Toshiba recovery CD because the recovery CD contains only the Image files.
The whole Windows OS, Toshiba drivers and utilities are packed in this image file but this file cannot be unzipped!
So if you need the driver please visit the Toshiba European driver page, choose your notebook series from the download form and download the right driver!
Best regards

Nvidia Geforce 8600M GT Driver for Vista

Hi mac-world!
I'm using BootCamp to start Windows Vista on my Mac Book Pro. I recently bought a seperate TFT-Display from Belinea, which I connect to my Mac Book via DVI. This isn't a Problem while using MacOS, but in Vista I can't adjust the resolution of the seperate Display to more than 1024x768 px. I already installed the Belinea Driver, but that doesn't solve the problem.
I am wondering, if I maybe need a driver update for the grafic-card. Unfortunately, Nvidia doesn't provide a driver download, but says, I need to contact my Laptop-Vendor for this issue. I didn't find a driver-download section on this page. Does someone know a solution? Where do I get the new driver?
Thanks in advance
regards
Thorsten

In my case after going through normal Shut Down procedures, I
noted that after I go through normal shut-down-from-Windows, the machine does not power off. I can only turn off the machine by pressing the power switch for a few seconds.
When I do not press this switch, Windows restarts after about ten minutes;
after, however, I receive a brief report (which I never manage to read in full)
informing me that a software may not have been properly installed or that I
need a windows update.
This problem appeared long after I installed all the software that I use,
and I have checked whether I'm fully updated (I am).
Lately when I start-up after experiencing this problem, Windows indicates
that the problem is caused by an NVIDIA graphics driver and suggests that I
check for a driver update. I have tried the NVIDIA Website but there was no
reference to the graphics card installed in my machine, namely GeForce 8600M
GT - I only found a driver for GeForce 8700M GT.
I have since solved the problem as rerported in http://discussions.apple.com/thread.jspa?threadID=1492731&tstart=0
However, I stll wonder why there is no reference to 8600 in the NVIDIA site.

NVIDIA GeForce 8600M GT driver for Vista x64

Hello,
I have an issue with my new MacBook Pro 2.4Ghz 17" that was released on the 5th of June, 2007.
It has NVIDIA GeForce 8600M GT installed on it and I simply cannot find Vista 64 bit drivers for it.
I have tried the latest beta Vista x64 drivers (163.11) downloaded from nVidia's official website. I have tried several previous versions including 100.97 one, which contains drivers for 8600M GT model. But they don't work with me. All the driver installation programs allert the following error and quit:
'The NVIDIA Setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit'.
I also tried Vista 32-bit drivers for 8600M GT. The driver installation program claims the operation system is wrong and quits.
Anybody has the same issue?
Does a working driver of nVidia GeForce 8600M GT for Vista x64 exist at all?
MacBook Pro 2.4Ghz Windows Vista nVidia GeForce 8600M GT

There was one Apple's presentstion where they boot into Windows Vista. So if you claim you can do it why do you forget about Vista x64 customers? I reckon it is because of Leopard that is coming. But it's not an excuse.
I'm currently working in Vista x64 and everything is fine except one thing, I cannot find a working graphics card driver and it is manufacturer's responsibility to provide it. Apple knew there going to be customers who will install Vista x64 on their computers and they at Apple didn't care about it because I guess it's a lame war between you know who.
So why you don't make everything perfect to attract even more Windows customers but instead you hint that you don't care about Vista x64 as you are getting your own 64-bit OS soon. So now they are forcing me to wait having been announced that I can use Vista. But isn't that kind of lame that it's slightly tardy? Why I should wait for Leopard launch if I was insured that Windows will work on my Macbook Pro? Because Apple claim you can run Windows. And don't say it's not official. Who else if not Apple made it possible to run Windows on Mac.
Don't get me wrong, I'm not trying to insult you. I'm just angry that I cannot find a working driver.
Message was edited by: Melnyk

Laserjet 4050n basic driver for vista causes crash on print command

This is a printer that works fine with several windows xp systems on the network, but on this LG LGR40 laptop, the print command causes a bluescreen crash. A previous intsallation of different drivers for vista caused the same problem. The OS is completely uptodate. Pls help!!!
Here's the incident report from Vista:
Product
Windows
Problem
Shut down unexpectedly
Date
29/03/2009 9:33 PM
Status
Not Reported
Problem signature
Problem Event Name:    BlueScreen
OS Version:    6.0.6001.2.1.0.768.3
Locale ID:    4105
Files that help describe the problem (some files may no longer be available)
Mini032909-02.dmp
sysdata.xml
Version.txt
Extra information about the problem
BCCode:    1000008e
BCP1:    C0000005
BCP2:    8CBFBC49
BCP3:    A72CFC98
BCP4:    00000000
OS Version:    6_0_6001
Service Pack:    1_0
Product:    768_1

The printer is on the network, so it's directly to IP address.
The driver was installed as admin user
No problem with the printer for >8 years.
No other vista systems.

Missig Driver for Vista

I have an old Tungsten T3 and just bought a new HP with Vista home. I have download the new vista desktop manager. Everytime I try to sync the computer tells me it needs to look for a "driver" for a new device. My previous laptop also had vista and I did not have this problem. I am using a new USB cable. Could this be the problem? Or am I missing a driver patch?
Post relates to: Tungsten T3

Hi, and welcome to the Palm Community Forums.
By "new vista desktop manager" do you mean Palm Desktop 6.2 by Access? If so, that version is not compatible with the old T3.
If you go to the Palm Desktop download page, select your device and Windows Vista, it will lead you to a downlad of Palm Desktop 4.1.4E. This is the one you should try. Note, the Quick Install tool does not work with 4.1.4E under Vista, but normal data synchronization should.
Post relates to: Centro (AT&T)
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Tecra S10-106 - 3G driver for Vista Ultimate 64bit

Similar Messages

Maybe you are looking for