Tecra S10 - event log shows several errors

My Tecra S10-167 has a problem for some weeks now. In the event log I get several errors, but mostly this one:
Provider
[ Name] atapi
- EventID 11
[ Qualifiers] 49156
Level 2
Task 0
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2011-02-14T18:20:12.558505100Z
EventRecordID 3020
Channel System
Security
- EventData
\Device\Ide\IdePort0
0000100001000000000000000B0004C002000000850100C000 00000000000000000000000000000000000000000000000000 000004100000
My laptop is giving me fatal errors and it reboots by itself.
Can anyone help me to solve this problem? Please guide me through this since I don't know a lot about computers.
I already reinstalled windows 7 without any result.
Thanks...

Hey,
If you have already reinstalled Windows but without success the case is clear in my opinion: Its a serious hardware malfunction.
Its really hard to say what the problem is but theoretically the RAM modules could be affected. This you can check using Memtest86 diagnostic tool and the HDD you can check using other tools like Drive Fitness Test.
But generally speaking if your notebook is under warranty give your notebook to an ASP and let the guys check the unit. Thats easier ;)

Similar Messages

Event Log shows error - AuditWriter

Taking a look at the server's event log revealed the error message below, which has been showing up for a while. Does anyone have any insight into this error?
==============[System Error Tracing]==============
[System Name] : OSoftCPM
[Message Type] : ErrorMessage
[Job Name]     : AuditWriter/LogDataChangesFromSendG
[DateTime]     : 11/5/2008 1:55:09 PM
[UserId]       :
[Exception]
    DetailMsg : {Object reference not set to an instance of an object.}
==============[System Error Tracing End ]==============

Make sure the reporting services is working properly.
You have to open in internet explorer the page: http://nameofserver/reports.
If you don't receive any error opening this page that's measn the reporting services is working well.
If you are receiving an error then you have to check the configuration of reporting services.
Kind Regards
Sorin Radulescu

Event Log stopped working - Error 1747 : The Authentication Service is Unknown

I reccently noticed that my scheduled tasks were no longer running. I tried to bring up the task scheduler and it said the service was not running. I checked the service and sure enough, it was not running. I tried to start it and it failed because the windows event log service, which is a dependency, was also not running. I tried to start the event log service, and gave the error above in the subject line.
The event log service uses a log on of "Local Service". There are other services that use the same log on and they start up with no problem. I have searched the internet for a solution to this and have tried several things I found with no luck. One was to run SFC, another was to delete the Windows/Logs and Windows/System32/Logfiles folders so they would be re-created on startup. I also tried subinacl to reset the ACLs on registry branches and the subfolders of %SystemDrive% as recommeded in another forum.
I am running Vista Home Premium and all the latest updates have neen applied. Anyone have any further ideas? (short of re-installing Vista).
Thanks.

Hi there Robin. I am an IT Technician & felt that I needed to begin communication with you regarding this issue. I recently made a post in this thread detailing my issues & found resolution. I just wanted to share my post with you & hope that the information is useful to others that need to resolve these issues without re-installing their operating systems. Please find my post below:
Hi all. I am an IT technician & have recently been troubleshooting a customer's Windows Vista Home Premium laptop in a wireless home network.
In a nutshell the laptop suddenly stopped connecting to the wireless router; upon investigation I found lots of windows services were not starting; this sent me on a bit of a wild goose chase as this showed all signs of some kind of trojan / malware infection hogging the system. Here are some of the things I saw:
1). Norton 360 wasn't even running correctly & I was unable to view it's firewall status.
2). Windows firewall was disabled & I was unable to start it (service failed error message).
3). I was unable to view windows event logs & received "Error 1747 : The Authentication Service is Unknown"
4). Windows Side Bar was all blanked out & not showing any gadgets
5). I attempted a system restore but that failed (I saw references in system restore that the Bonjour service had been un-installed)
I did loads of further investigation & found this thread. It would appear that removing, or even trying to remove / un-install the Bonjour service may cause the above mentioned issues in windows Vista. I have not seen this kind of errata in windows XP.
I have heard of people pulling their hair out & re-installing the operating system possibly due to experiencing these issues.
Please Read On....
Resolution that worked for me:
I ran the Winsock corruption fix that is mentioned in previous threads as per microsoft's instructions found at the following URL: http://support.microsoft.com/kb/811259
Manual steps to recover from Winsock2 corruption for Windows Vista users
Winsock corruption can cause connectivity problems. To resolve this issue by using Network Diagnostics in Windows Vista, follow these steps:
1.
Click , and then click Network.
2.
Click Network and Sharing Center.
3.
In the Network and Sharing Center box, click Diagnose and Repair.
Note You may also access the Network and Sharing Center in Control Panel.
If the Network and Diagnostic tool was unable to find a problem, you can manually repair or reset Winsock.
Manual steps to repair or to reset Winsock for Windows Vista users
1.
Click , type cmd in the Start Search box, right-click cmd.exe, click Run as administrator, and then press Continue.
2.
Type netsh winsock reset at the command prompt, and then press ENTER.
Note If the command is typed incorrectly, you will receive an error message. Type the command again. When the command is completed successfully, a confirmation appears, followed by a new command prompt. Then, go to step 3.
3.
Type exit, and then press ENTER
Hey Presto!!!! After re-booting everything is back online & all necessary windows services & norton 360 are starting as normal.
Further Information on Bonjour Service:
http://en.wikipedia.org/wiki/Bonjour_(software)
As I understand & in my experience the Bonjour service is installed as a sub-aplet with certain 3rd party software applications including Apples itunes & Adobe newest Creative Suite 3 installs Apple’s Bonjour service even if you don’t install Version Cue. Its main goal is to provide zero-configuration connectivity between Version Cue server and the suite’s applications.
A bit more CSi & i've established how to un-install Bonjour service; there is a great topic on this subject at the following URL: http://www.raymond.cc/blog/archives/2008/02/10/how-to-uninstall-or-remove-bonjour-mdnsresponderexe/
Thanks to all for your post & input...it has really helped to get this issue resolved (well for me anyway) & has of course save a re-install!!!!
I will keep an eye on this thread...please post your resolutions / experiences to help others.
Kind regards

CVI crashes - event log shows [FATAL] [LW_UAE_Handler] [..\jeff\i386\except.c:161] Assertion failed: 0.

Hello,
When calling lua_error(L) (pushing a Lua error in an embedded lua interpreter in my CVI code), I have been encountering a complete crash. Not only does my code stop running, but the full CVI 9.1.1 IDE crashes without even an error message. When I look in the windows xp event log I find the following:
The description for Event ID ( 0 ) in Source ( CVI ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: [16:45:30.768] [FATAL] [LW_UAE_Handler] [..\jeff\i386\except.c:161] Assertion failed: 0.
When I recompile my project with visual studio, the identical code does not crash or cause any problems. Any insite on this problem would be greatly appreciated.
thanks,
Alex Corwin

Hello Alex,
Could you try to generate a crash dump? Also, here is a community example of code using an embedded interpreter LUA in a LabWindows/CVI Project.
Regards,
Jeff L.
Applications Engineer | National Instruments

AppleScript Editor -- Event Log shows only Result

The Event Log pane at the bottom of the AppleScript Editor window shows only the result after I run a script, regardless of whether I choose the "Result" button or the "Events" or "Replies" buttons. I've only recently begun consulting the Event Log regularly, so maybe I'm not completely familiar with how it's supposed to work. But I'm fairly certain that, until yesterday, after I ran a script, the Event Log would show a detailed log of the script in action, and if I clicked on the "Replies" button, it would also show the result of each line. Isn't that how it's supposed to work?
For example, if I run this script:
tell application "Finder"
get version
end tell
In the bottom pane, with "Events" and "Replies" selected, all I see is this:
Result:
"10.8.2"
Shouldn't I see more than that? I'm sure that in the past I've seen actual lines from the script in that window.
Thanks.

The Events button will show Apple Events such as tell statements and display dialog commands, while the Replies button will show the reply to those events. The Result button just shows the result of the script, which is the value returned (or the last value of the (internal predefined) result property).
The Events History window isn't really meant to be a debugging console, but you can also add your own entries there by using the log command.

No response from HP Deskjet... Log shows InkChecker error

I've been having the same problems several people have discussed with my printer. My HP Deskjet 3650 has always worked marvellously with my Mac until about a month ago, when it suddenly quit working. Since then, the only thing I have managed to print is the test page available through the HP toolbox, which tells me that the trouble is not in the printer itself or the cable. I have tried everything suggested on other threads, including
*Reset printer system
*Install new drivers (I have 3.3 Universal Binary)
*Repair disk permissions
*Delete and re-install printer
*Delete print queue
I checked the log file, and this is the message it displays when I try to print, no matter what application I'm using:
2006-07-16 15:34:21.654 TextEdit[205] InkChecker could not launch , launch path not accessible
2006-07-16 15:34:24.852 TextEdit[205] PMSessionBeginDocumentNoDialog failed (error code = -30896)
2006-07-16 15:34:26.421 TextEdit[205] Failed to create PMPrintContext
Can anyone tell me what this means, and how to fix it? I'm dying here...

After checking around some more (http://discussions.apple.com/thread.jspa?messageID=2555552), it looks like the problem may be in my Carbon Printing Manager, and the only solution may be to archive and uninstall. Is there any way to get around this?

Firefox is very-very slow at gmail, facebook, etc & shows several errors. How could I remove them?

Firefox often shows errors like - 'error #101, #102 ' , etc and takes several time to load a page in spite of being a new version.

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

[SOLVED] getting KDE4.2 event log in .xsession-errors

Hi,
My KDE4.2 desktop started adding log entries in the .xsession-errors file. They look like this:
knotify(6768) KNotify::event: 49 ref= 0
kwin(6764)/kdeui (KNotification) KNotification::slotReceivedId: 0
kwin(6764)/kdeui (KNotification) KNotification::close: 0
kwin(6764)/kdeui (KNotification) KNotification::~KNotification: -2
Everytime I interact with the desktop (e.g. click icons or switch window), it appends those entries in the file - which compound quite fast. Does anyone know if those are real error messages which I have to fix, or just some debug messages from one of the module?
Last edited by zaazaa (2009-03-23 16:58:04)

Heema wrote:
i also have kdemod and found out that .xsession-errors was huge
for a temp solution i made a script to delete it on startup
Agreed, I did the same yesterday. In the /home/USER/.kde4/Autostart directory, I wrote the following simple bash script:
#!/bin/bash
rm /home/USER/.xsession-errors
This deletes the file .xsession-errors at startup and avoids any potential accumulated file 'buildup' and resulting wasted partition space.
According to the file /usr/share/config/kdm/kdmrc, it contains the following statement:
# Default is ".xsession-errors"
This indicates that kdm creates this file no matter what (default), and as far as I know, it cannot be avoided, but can be deleted upon startup.
Cheers,
Eugene Markow

VCM 5.7.1 - Failure Collecting Event Log Data - "Unknown Error: -2147024891"

When attempting to collect on certain Windows 2003 Servers I'm receiving the error "Unknown Error: -2147024891". The application is utilizing a domain level service account that should have all the necessary administrative permissions. VMware suggested it may be a GPO setting, but my AD team has said it resides in the same organizational unit as other's that work without issue. Has anyone encountered this before?

I'm having the same problem, any ideas or resolutions?
*Edit* Just worked with VMware, turns out our workstation service had stopped. Make sure both the server and workstation services are started as they will cause certain parts of the collection to fail if they aren't.

Windows 2008 R2 Sp1 backup failing with Event Id 517 and Error Code: 2147942487

We have a windows share that we dump multiple windows backup images from our servers. We have 1 server consistently failing when performing a manual "Backup Once...." operation.
The error message in the Windows Backup gui is: "Failed The parameter is incorrect"
The event log shows an error of 517 with the message: "
The backup operation that started at '‎2015‎-‎01‎-‎12T14:25:20.681861800Z' has failed with following error code '2147942487' (One or more arguments are invalid). Please review the event details for a solution, and then rerun the backup operation once the
issue is resolved.
The strange part is when we choose a different location to accept the backup we have success. The backup starts, but fails between 1-6 GB transferred.
Any assistance would be appreciated.

Hi,
Do you mean that if you change the backup location, the backup could be started - but still fail after backing up 1 - 6 GB data?
One of the possible cause is an incorrect partition table entry and NTFS total sectors.
Please test to shrink the volume you are going to backup for several MB.
Right click volume >>Select shrink, shrink several MB (such as 3MB).
Then extend the volume back to original size. You can right click on volume and select Extend volume.
When it finished, see if issue still exists.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Unconfigured VG Ports Show Event Log Errors

Unconfigured ports on a VG224 or VG248 show up in the Callmanager's Event Log as Stop Errors. Any way to suppress or filter these? I have roughly a hundred voice gateways with countless unassigned ports. It makes the Event log unusable to viewing other status.

Telnet to the VG248 and disable the port. If you leave them enabled, with no DIDs on them, or unregistered, they will sit there and peg your CCM constantly wanting to register. I just found that out.
Enable the next open port on the VG248?s. If possible, fill up on VG248, move to the next one.
To enable a port:
i. Telnet to VG248
ii. Login
iii. Configure
iv. Login with the #CCM pw
v. Scroll to Telephony then Port Specific Parameters, then select ?enabled port? to disable it
vi. Change your status from Disable to Enable (hit enter for menu to select Enable)
vii. Esc out until it exits the logout menu.

Event log errors after upgrading Aironet 1100

We have upgraded an Aironet 1100 to 12.3(8)JA. We used TFTP for the upgrade and everything seems to be working properly.
However, the event log shows the following message every four seconds: "System running-config write error; configuration failed" This has Error as the severity.
Every thirty minutes another, Critical error is logged "Memory allocation of 900000 bytes failed from 0x22DC78, alignment 0"
I've searched the site and can't seem to locate applicable information on these errors and what they mean. Can someone help?
Thanks!

Oddly enough, this is the most stable AP we have! A PDA can connect to it and stay connnected, whereas our other 1100s (which have not been upgraded and generate the same error messages but only once or twice a day)will permit a device to connect then boot it off after a few seconds to several minutes. We thought the upgrade would make the AP connections more stable but were surprised to see the error messages being generated so rapidly.

Error 41 - Kernel Power in event log after clean shutdown - Windows 8.0

HP Envy H9-1405A - 16MB RAM, Windows 8.0, and up to date with updates. (16 months old but under extended h/w warranty). All user data backed-up daily.
After problems earlier today I noticed that after a controlled shutdown and start from cool (ie on/off button on PC, not mains power at the wall) the startup took over 10 minutes. Event browser showed error 41 - Kernel Power - "after system crash or lost power unexpectedly", which it definitely hadn't as I was testing a controlled shutdown.
When starting from overnight sleep mode this morning it came up with blue screen and an error mssage something like 'hard disk driver error', or similar (before first coffee so I wasn't really awake). PC wouldn't restart in anything like reasonable time until powered off at wall, after which it struggled up and ran normally for a while. Went out for a couple of hours and on return again the PC wouldn't re-start from sleep mode. Again used the wall power switch to effect the restart and PC and after very slow restart it ran normally. Event log showed Startup Repair ran due to a corrupted registry hive, and reboot used an earlier version.
Checkdisk ran clean and the HP Support Assistant diags just looped for ever.
I then tried a system restart, which worked but took a long time, and then a controlled power down and start from cool which also took a long time as described above. I've temporarily turned off sleep mode so as to keep working.
Question - do I have a transient software problem which might be fixable with Recovery, or failing hardware that should be covered by warranty, and where might I find some hardware diagnostics to show to the supplier? Thanks.

Hello @mikerb,
I have read your post on how your desktop computer is displaying an error message in regards to a Kernel event log, and I would be happy to assist you in this matter!
To further diagnose this issue, I recommend following the steps in this document on Windows Kernel event ID 41 error "The system has rebooted without cleanly shutting down first". This should help to resolve the critical error message.
Just to be on the safe side, I also suggest following this resource on Testing for Hardware Failures (Windows 8); which should help determine if there is a hardware defect with one or multiple hardware components on your computer.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

1100 Event Log Errors After Upgrade

We've upgraded some Cisco Aironet 1100 access points to Firmware Version 12.3(8)JA2. Since the upgrade we've seen several connectivity problems with Dell Axims get cleared up however the event log for each of the access points shows this error message every three seconds: "System running-config write error; configuration failed" and this critical message every thirty seconds: "Memory allocation of 900000 bytes failed from 0x22DD2C, alignment 0".
The access points appear to be working well, however, the fact that we're getting these kinds of error must mean something is going on in the devices.
I can't find any information in the documentation about this...does anyone have any ideas what these messages are telling us?
Thanks!
==Danny

Oddly enough, this is the most stable AP we have! A PDA can connect to it and stay connnected, whereas our other 1100s (which have not been upgraded and generate the same error messages but only once or twice a day)will permit a device to connect then boot it off after a few seconds to several minutes. We thought the upgrade would make the AP connections more stable but were surprised to see the error messages being generated so rapidly.

Missing VSS System Writer and CAPI2 error in Event Log

Hello,
I'm having problems with making full system backup of Windows 2008 R2 x64. It looks like this is related to missing VSS System Writer. When I'm running command "vssadmin list writers" there is no System Writer in writers list and in event log CAPI2 error (event ID 513) is showing with this description:
Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object.
Details:
TraverseDir : Unable to push subdirectory.
System Error:
Unspecified error
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-CAPI2" Guid="{5bbca4a8-b209-48dc-a8c7-b23d3e5216fb}" EventSourceName="Microsoft-Windows-CAPI2" />
<EventID Qualifiers="0">513</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2010-03-14T01:06:35.639125000Z" />
<EventRecordID>207975</EventRecordID>
<Correlation />
<Execution ProcessID="968" ThreadID="11588" />
<Channel>Application</Channel>
<Computer>System3</Computer>
<Security />
</System>
<EventData>
<Data>Details: TraverseDir : Unable to push subdirectory. System Error: Unspecified error</Data>
</EventData>
</Event>
any idea what could be wrong?
Thanks in advance

Hello ,
Based on the research, the VSS System Writer runs in the context of CryptSvc service on Windows Server 2008. To make the system writer works normally, please open services
console to verify that the Cryptographic Services logon as the credentials of the "Network Service" account.
The VSS system writer can be missing due to several reasons, to isolate this issue, please refer to the following steps to boot the problematic server with clean
boot mode to perform the test.
Steps: Clean Boot
1. On a problematic server perform a clean boot and check if the issue still exists
2. Click Start->Run...->type msconfig and press Enter
3. Click Services tab and select Hide All Microsoft Services and Disable All third party Services.
4. Click Startup tab and Disable All startup items
5. Click OK and choose Restart
After the server reboot, please run "vssadmin list writers" to check if the "System Writer" can be displayed.
If the issue still exists, please open a CMD prompt as Run As Administrator and type the following commands to see if it the system writer will be occure.
CD c:\windows\system32
Takeown /f %windir%\winsxs\filemaps\* /a
icacls %windir%\winsxs\filemaps\*.* /grant "NT AUTHORITY\SYSTEM:(RX)"
icacls %windir%\winsxs\filemaps\*.* /grant "NT Service\trustedinstaller:(F)"
icacls %windir%\winsxs\filemaps\*.* /grant "BUILTIN\Users:(RX)"
Moreover, based on the experience, it has been reported that there is some permissions issue which can cause this kind of issue. Please follow the steps below and check
if it can be helpful.
On domain controller
1. Open Active Directory Users and Computers
2. Click View and then "Advanced features"
3. Right Click built and click properties.
4. Click security tab.
5. Grant read permission to 'Authenticated Users'
6. Click Apply and OK.
7. Restart Cryptographic Services.
Note: By Default, it should have read permission for the system to take system state backup.
Hope this can be helpful.
MCTS: Windows Vista | Exchange Server 2007 MCITP: Enterprise Support Technician | Server & Enterprise Admin

Tecra S10 - event log shows several errors

Similar Messages

Maybe you are looking for