Tecra S11 - nVidia or RealTek sound driver. Which one do I install?

Tecra S11 nVidia vs RealTek sound driver - which one do I install?
I've installed nVidia and realtek sound driver also. I've got BSOD when I plug in 3.5mm jack headphone. When I want to listen music with my Bluetooth stereo headset I also got BSOD.
I reinstalled nvidia and realtek sound drivers. My Tecra S11 is very slow since I installed latest nvidia video driver from nvidia website.
Windows 7 very very slow since then. Firefox start up time sometimes 20-30sec

Hi petersm,
The sound card of your notebook is a Realtek one so you have to reinstall the Realtek sound driver that you can download on official Toshiba website.
But as MisterX wrote you should also reinstall the Bluetooth driver because the tosrfsnd.sys file belongs to BT driver so its worth a try ;)

Similar Messages

ForA1354477: problem with realtek sound driver download for windows 7

I recently did a clean install of windows 7 enterprise and I lost the option on the sound recording page for stereo mix. I found a driver update on the toshiba website for my machines realtek sound driver for windows 7 so I tried it and it worked (sort of). Now I have the stereo mix option set as default but I also cannot make any changes in the sound recording page (the tabs are nor functioning and my cursor spins it's little processing circle when it is over the page). I can't even close the page without using the option from the task bar and sometimes that fails so I have to use the task manager to close the page. Anyone else have this problem?

Satellite A135-S4477
These two drivers should work for your Windows 7. Although they carry the same version and date, they are different files with different sizes. Try them both.
Realtek Audio Driver for Windows 7 (32/64) (Version 6.0.1.5904 - Released 09/04/09)
Realtek Audio Driver for Windows 7 (32/64) (Version 6.0.1.5904 - Released 09/04/09)
-Jerry

Error message: The scn engine received a request fro an I/O driver which is not currently installed on the controller.

Hi,
I am currently working in a new application with a cRIO system and I am having some issues when try to run a VI. My actuall configured hardware is as follow:
-cRIO-9113 4 slot chassis
In this chassis I have installed 3 NI 9514 servo interface modules in slot 1, 2 and 3
-cRIO-9022 Real-Time Controller
-NI 9144 8 slot expansion chassis
In this chassis I have installed:
-Slot 1: NI 9213 (16ch thermocouple inputs module)
-Slot 2: NI 9201 (8ch ±10 V analog input module)
-Slot 3: NI 9263 (4ch ±10 V analog output module)
-Slot 4: NI 9426 (32ch sourcing digital input module)
-Slot 5: NI 9426 (32ch sinking digital input module)
-Slot 6: NI 9476 (32ch sourcing digital output module)
In the controller I have installed the following softwares:
-IndCom for EtherCAT Scan Engine Support 1.2.0
-LabVIEW NI SoftMotion Module 9.0.0
-LabVIEW NI SoftMotion Module Scan Engine Support 9.0.0
-LabVIEW Real-Time 9.0.1
-LabVIEW PID and Fuzzy Logic Toolkit 9.0.0
-Web Server for LabVIEW RT 2.0.0
-Language Support for LabVIEW RT 1.0.0.3
-NI Scan Engine 1.1.0
-NI Scan Engine Advance I/O Access 1.1
-NI-Motion 8.0.0
-NI-RIO 3.4.0
-NI-RIO IO Scan 1.4
-NI-VISA 4.6
-NI-VISA Server 4.6
Well, I made VI to test my inputs and outputs, and the problem that I am having is that when I try tu run the VI, in the deployment window I get an error message that read: The scan engine received a request for an I/O driver which is not currently installed on the controller.
Apparently there is another driver that I need to instal in the controller, but I have no idea of what driver could be. If someone have any idea of what this problem could be, I really will appreciate your help.
Ferdinand Martinez
FMO Automation LLC

Hi nausfaratu,
Can you elaborate a little further? What are you doing in your VI? Are you getting this error when you build it into a Real-Time Application (EXE) or when you just run it from the development environment? Is that the recommended set of software or did you do a custom software install on the controller?
Aaron P
National Instruments
Applications Engineer
http://www.ni.com/support

Do i need to install and anti virus software on my macbook air? if yes, which one should i install?

Do i need to install and anti virus software on my macbook air? if yes, which one should i install?

Welcome to Apple Support Communities
OS X has got its own security systems, so you don't need any antivirus. Furthermore, they will only slow down your computer. If you want more information, read > http://www.thesafemac.com/mmg
If you want an antivirus, install ClamXav, but you don't need an antivirus

I have got a lot of apps, which are not installed on any of my iDevices anymore. is there a possibility to remove all those apps from iTunes without searching which ones are, and which ones aren't installed on one of my iDevices?

I have got a lot of apps, which are not installed on any of my iDevices anymore. is there a possibility to remove all those apps from iTunes without searching which ones are, and which ones aren't installed on one of my iDevices?

Assuming all the device(s) have been synced to this computer as its Home computer. The easiest way would be to delete all the apps from iTunes. After which connect your device(s) to the computer (iTunes) and transfer purchases from the device(s) by right click (control click) the device name in the left sidebar and the click transfer purchases. When done only the apps on your device(s) will be in you iTunes library.
Hope that helps

Need Realtek Sound Driver

I cannot find the correct sound driver for my Toshiba Satellite L355-S7905 laptop. Can you please let me know where to find and download it. Thank you

The sound driver for that machine can be found HERE. Many other drivers and other details about your machine can be found HERE.
C.B.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Satellite Pro L40 - Sound Driver after Windows XP SP3 Install

Hi,
I had bought the Satellite Pro L40 about 6 months ago and the speed of the laptop was too slow with windows Vista. So I decided to install an old copy of windows XP that I had bought earlier. I upgraded the windows installation to SP3 before installing all the drivers.
Now all the drivers have been installed properly except the sound driver. I downloaded the XP version of the driver from the toshiba website but it did not work. So I though maybe the vista version would work, so I downloaded that. But that didn't work either.
Can anyone suggest a solution where I can get the sound driver to work? Preferably without having to get the windows reinstalled again.
Please help me out...!
Thanks

hi there,
Try reinstalling the soundcard driver for XP; Just go here -- > [Realtek Soundcard Driver fo XP|http://support1.toshiba-tro.de/tedd-files2/0/sound-20071120150900.zip]
Hope this helps :)
Message was edited by: iSkO

MSI nforce drvier 5.03 or NVIDIA's 5.10? which one?

Hi i have a question to you guys..
I'm about to make a fresh installation of my machine
i got K8N Neo Platinum and A64 3200 newcastle
I see there is on msi download site nforce chipset driver v5.03
and on the other hand there is nvidia's nforce chipset driver v5.10
checking the details shows that nvidia's driver is way newer
but maybe there is something i'm missing with the MSI's one.
which one should i pick ?
Thanks in advanvced

When MSI "made" their package nvidia official was 4.27 or 4.24.
So back then some drivers in it where more recent with msi's .
If you want all the latest drivers use nvidia's 5.10 package.

SOLID STATE DRIVE, WHICH ONE TO GET? I NEED HELP me please!

So I am looking to get a SOLID STATE DRIVE but not sure which one to buy, I had gotten the intel x25 80gb but its too small and not too much different from my stock hdd. I mean sure its fast but not worth $200 thats for sure. I need a top quality, flying fast and worth the money SSD, SO WHICH ONE DO YOU RECOMMEND? I was going for the c300 from crucial the 128gb to be exact, but I have heard so many bad things.
My current setup is 13" i5 2011 version, with 8gb ram upgrade.
Im running OS X 10.6.7 and Windows 7 boot camp as well.
I need to know before I go to store tonight.
thanks!

Many users on this forum are very happy with OWC's line of SSD. They're located in the greater Chicago area but I don't think they have a retail store you can drop into. Great vendor in that they offer good prices, they specialize in Macs, great service and they're stuff is high quality. You can visit the SSD section at:
http://eshop.macsales.com/shop/internalstorage/Mercury_Extreme_SSDSandforce
BTW please don't type in all caps, it comes across as yelling. We can hear you fine.
Roger

Which one should be installed first Desktop or Admin

Hi,
Can someone please tell me which one is needed to be installed first....
Discoverer Desktop or Disc Admin?
Thanks
Kumar

Hi Kumar,
Disc Admin is needed first.
You first have to set up the EUL, bussiness areas, folders, etc... After you have that set up you can connect using discoverer desktop/plus and create workbooks based off of the work you did in admin.

Tecra M7 DVD: CD/DVD RAM drive does not work since installing Vista

I did a clean installation on my Vista Ready new M7. It had XP tablet to begin with and the DVD drive worked fine. Indeed I used it to install Vista (Home Premium).
Now it does not work at all. It spins but does not read. Device Manager tells me device cannot start. Tried to update driver and it told me that it has the most uptodate driver.
Downloaded all the drivers from Tosh download centre for Vista upgrade of M7 (which got bluetooth, screen rotation etc to work fine). But none of the downloads seemed to be a driver for the DVD-Ram drive. Can not find a driver anywhere else (including Panasonic site).
DVD drive is Mat****a DVD-RAM UJ-841s
Any suggestions?

Hi
On the Toshiba driver page you can find the DLA for Tecra m7.
Did you try to install the XP DVD-RAM driver from the Toshiba page on the Vista OS?
Maybe it will works
But listen the CD/DVD drive uses the common Microsoft drivers which are included into Vista or XP.
Therefore an additional driver should be not needed!
One additional proposal;
Remove the CD/DVD drive from the device manager and reboot the notebook.
After new reboot the OS should install the drive again and should renew the software.
Other hint:
- Start the registry
- Choose the registry key;
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
- In the right pane, right-click UpperFilters and LowerFilters then click Delete.
- and restart the notebook

Extreme and external hard drives - which one

Hi I am looking to attach a external hard drive to the airport extreme but I am not sure of the spec of hard drive that I would need or can you just hook up any type sata, ide,etc. there is no info in the setup guide.
Also I looked at a wireless hard drive does anyone have any idea's as to the best one to get ?
I have put a bid in on ebay for a dlink usb wireless router that CNET said you can use to link in a external hard dive so because I have a spare 70GB IDE hard drive and and enclosure for it from a previous project I was going to hook it all up and try and use what I had but I have no idea whether it will work. A wireless network enclosure is about £150 and then you need a hard drive to go in it so it would be in excess of £200.
Any thoughts would be appreciated.
Regards

As long as it offers USB you are ok - the kind of hard drive(s) inside is of secondary importance. I would however refrain from WLAN HDDs as you just add another element that can go wrong. USB is a hard wire and is robust. So if you can place your external HDD next to your AE, I would go for that. Works for me fine.
Martin

Need to replace my Optical Drive, which one should I get?

I have a Dual 2gig power G5 with 1.5gig ram. The Optical Drive is a Pioneer DVD-RW DVR-106D Revision A606. The drive is going bad and needs to be replaced. I use FCE to make my projects then use i-DVD. Once done with i-DVD I create a disc image and use disk utilities to burn using an Imation, or Sony disc media. The last couple of times I tried burning a disc I got errors. I beleive it is the drive. Can someone tell me what kind of replacement Optical Drive I should get.

I use the following Pioneer burners both internally as well as external via FW 400 enclosures and I know they work well for reading or writing to dual and single layer DVD-R using either Verbatim, Maxell, Tiayo Yuden, or RiData:
Pioneer DVR-115D, and Pioneer DVR-110U.
There are other models that work from Pioneer as well as Sony. (Pioneer Burners are normally a safe bet on most macs).
If you want something external / preconfigured then consider LaCie Burners.
All of the above recommendations work well with iDvd as well as Roxio Toast and FCS2 / DVDSP.
Good Luck.
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.

SOLID STATE DRIVE, WHICH ONE TO GET? I NEED HELP

So I currently have the early 2011 Macbook Pro 13" i5 8GB Ram. I want to get a SSD but I cannot make up my mind, I did buy the 80GB X-25 Intel but its too small and too slow for me. I was about to get the crucial c300 128gb today but I heard about all the problems. So guys and gals, help me out. I want to get something under $300 and under 180gb, so what do you think is best easy to install without issues.
I will need to buy today so help!

Many users on this forum are very happy with OWC's line of SSD. They're located in the greater Chicago area but I don't think they have a retail store you can drop into. Great vendor in that they offer good prices, they specialize in Macs, great service and they're stuff is high quality. You can visit the SSD section at:
http://eshop.macsales.com/shop/internalstorage/Mercury_Extreme_SSDSandforce
BTW please don't type in all caps, it comes across as yelling. We can hear you fine.
Roger

OWC SSD drives - which one to buy?

I'm planning to buy an SSD from OWC to replace the HDD in my MacBook Pro 2010. I understand this laptop only supports SATA II (3G) and not SATA III (6G). However, the price difference between this model and this model is very small for the 115/120 version that I would buy. Is there any reason not to pay the extra $5 for the 6G version (aside from futureproofing) even though my laptop can't take advantage of the extra speed?

I'm looking for the same info. This link suggests a slight but unimportant performance penalty:
http://macperformanceguide.com/Reviews-SSD-OWC-Mercury_Extreme-6G-fill-volume-ma cpro.html
I see a $10 difference at WOC. It does seem like there must be a catch... I think I'll get the 6G....
-- andrew

Tecra S11 - nVidia or RealTek sound driver. Which one do I install?

Similar Messages

Maybe you are looking for