Tecra S2 - Can I change the mainboard battery?

I have a Tecra S2 and it appears that the motherboard battery may be dead. I have removed the motherboard and it appears that the battery is soldered in. Is it possible to replace the battery or do I need to get a new motherboard, and if I get a used motherboard am I likely to find that its battery is stuffed as well?
I dont want to take it to service centre if it cant be fixed because they charge like wounded bulls here, I will take it a service centre if the battery can be changed

Hi
As far as I know the soldered battery can be recharged as suggested by C3PO.
If the battery cannot be charged due to a malfunction then you will need a help from an technician.
There are different motherboards on the market some batteries can be removed and some are soldered as you have suggested in the posting
I your case I doubt you would be able to remove this RTC battery
PS: a new motherboard is very expensive. Its one of the expensive notebook parts beside the LCD screen so you should consider this before you would replace the mobo.

Similar Messages

  • How can I change the cmos battery in the presario r3000

    how can I change the cmos battery in the presario r3000

    Hello dgreen631. I understand that you'd like to replace the CMOS battery in your notebook. Is this correct?
    What you need is the Maintenance and Service Guide for your notebook. Here is a link. While it does not have a specific section for replacing the CMOS battery it does cover the disassembly of the notebook and should provide you with the needed information to perform the replacement.
    I hope this information is helpful; have a great day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • Tecra S: Can I change the IRQ settings?

    Hi,
    Recently I got a new external soundcard (E-MU 1616m) which uses a PCMCIA card to connect to the computer. It's not functioning like it should because of the fact that the PCMCIA cardbus controller is sharing it's IRQ with a range of other stuff (USB controllers, internal modem and the video card).
    Is there any way I can change the IRQ setting for the PCMCIA controller?
    I now that if windows XP is installed as an ACPI computer it doesn't allow you to change IRQ's but if you install it as standard PC it does. Anybody now how to do this?
    Any help is more then appreciated!
    Thomas

    Hi
    As far as I know since Windows 2000 its not possible to change the IRQs manually.
    Check this link:
    http://support.microsoft.com/default.aspx?scid=kb;en-us;232824
    Well, in my opinion you can try to remove the PCMCIA from Device Manager. After the rebooting of unit the OS recognize the PCMCIA device and allowances the IRQ.
    Try it.
    Bye

  • HT1651 Can I change the HDD in my MacBook White aesily or I have to do open the macbook exactly to the mainboard...?

    Can I change the HDD in my MacBook White aesily or I have to do open the macbook exactly to the mainboard...?

    Check out these instructions from iFixit. This is for the Core 2 Duo version;
    Or for the earlier Core Duo try here.

  • I have my iPhone 4s plugged into a dock and the dock connected to an amplifier, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhones volume bar disappears. how can i change the volume?app?

    Hi
    I have my iPhone 4s plugged into a dock and the dock connected to an amplifier with 2 speakers and a bass, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhone´s volume bar disappears and im not allowed to change the volume and its very loud. how can i change the volume? is there an app? any ideas??(my dock doesnt have infrared remote controller )
    TY!!!!

    Kline25 wrote:
    So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
    Apple does not repair devices beyond replacing the screen on some models or a battery replacement.  They replace the ENTIRE device.
    For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device.  Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
    Apple will not touch the device now.  They will know that it was opened elsewhere and that the replacement screen is not original.

  • Can't change the Message Centre Number in my Nokia...

    I have a 3 day old Nokia X. I can't send text messages due to wrong the message centre number set in my Nokia X device. When I try to change it in settings, a pop-up appears which say "It is bad to change SMSC Number. Do you want to change ?". I choose "Ok". Then nothing changes Message Centre Number is set on "+7" and does not changes. I have tried many things including removing battery and SIM Card without switching off the device and reseting the device to Factory Defaults. But the problem persists. It doesn't changes. I live in New Delhi, India.
    Any help will be appriciated.

    No I am not able to resolve the issue.
    I reset my phone without the SIM Card also but same thing repeats. I can't change the Message Centre Number. It reverts to +7 when I try and change it in settings with the pop up "Changing the SMSC may cause problems sending messages, to confirm the change ?". Then I tap "OK" and nothing changes the Message Centre Number is still +7.

  • Can I change a new battery for my MacBook Pro 15' Retina? How?

    Can I change a new battery for my MacBook Pro 15' Retina? How?

    Hi!
    About a month ago, my MBPr 15", mid 2012 (Model Identifier10,1) showed, at first, Battery Service warning and on the next day X over the battery icon with Battery Not Available message in the status. MBP would run only and while the charger was plugged in, plug led would be always green, when connected. Battery test third party sw would not detect the battery, any longer. 
    Replacing upper case with battery/keyboard/trackpad, as per Apple,  in my country was too expensive, over 1000 USD, did't make any sense to me, so I've chosen DIY option (https://www.youtube.com/watch?v=pLhHSIej9fs) with all necessary precautions like tools, ESD protection grounded pad in place and ordered "new" replacement battery from Hong Kong on Ebay (http://www.ebay.com/itm/400699766989?_trksid=p2057872.m2749.l2649&ssPageName=STR K%3AMEBIDX%3AIT).
    Yesterday I came in new packing/sealed, I installed it, plugged the power cable on, plug led would turn green and then orange, I thought it's ok, but once system booted, I saw again X over battery icon and "Battery Not Available". I checked all the hints on internet, tried several times SMC and EPRON resets, no success. I filed complaint to Ebay supplier, he replied that battery undergone test prior the shipment, but ready for return and refund.
    So, I can make another try and buy the battery from Ebay but what if the problem is with my logic board? From one hand charger plug led lights orange when connected to MBP, on another hand System doesn't see the battery at all: No battery in the System info/Hardware/Power. it works absolutely fine when plugged-in to charger. I ran extended AHT (over pressed "D" key while powering on) twice with No Problem in return. So, my question is does it ultimately mean that Logic Board and power circuits are all fine and the whole thing is about "new bad" battery? I there any way to entirely test Logic board and narrow down problem origin?
    Thank you for attention in advance,
    Nurlan

  • Why I can not change the display when I turn the Ipad from horizontal to vertical position ?

    Please help to give me the guide line to solve the problem in my Ipad
    I can not change the display when I move the ipad from horizontal position to vertical position

    Have you got a lock symbol at the top of the screen next to the battery indicator ? If so, then depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can lock rotation either by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
    If there is no lock symbol then try a reset and see if rotates after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • CHANGING THE INTERNAL BATTERY

    I was looking for a site that offered pictures and step by step instructions for how to change the internal battery. You know the one that keeps the time and date. But if you can help other wise I'm sure it's easy enough but wanted to take a look first without opening it up. Thanks

    It won't hurt the iBook to be on all the time. You can do that, or else just reset the time and date when you do turn it on.
    There is a capacitor that will keep the time and date for a short while--maybe 30 seconds--enough time to replace the battery in theory. But only a working big battery will keep the date and time all the time. Or being connected to a power source all the time.

  • HT5312 I DO remember them but Apple chose to put them in Japanese and I can not change the language on Manage my Apple ID so I do not know if I made an error ,it threw me off , it was the wrong question Where did you fly to on your first Aiplane trip ? th

    I DO remember them but Apple chose to put them in Japanese and I can not change the language on Manage my Apple ID so I do not know if I made an error ,it threw me off , it was the wrong question Where did you fly to on your first Aiplane trip ? then I was unable to enter until 8 hours then called Apple Japan 4 times each time threy asked me would you like to speak with an English speaker,I said yes then they told me sorry today is Sunday no English speakers ,but they refused to speak Japanese, then I called 5th time and a kind guy could speak English we were on 1and 1/2 hours he got me to log in but the reset key chain could not be completed still pending.
    He said do not mess with that ! then I got a text from somewhere to reset 4 pins suddenly it was very strange I said to him that I got this pin this morning but it said you can use maximum 3 hours it had a UK number and I told him I do not like this and will not enter the code he said do not do it if it is from the UK and then I said to him ok you did a lot to help but we can not go any further ! and we cut of I went back to my computer to re do the ID but I found everything a mess so I call and a stupid sounding Japanese women with a squeaky voice came on I was calm at first and they want your phone number your IMEI number your iPhone serial number date of birth Address email address it takes 10 munutes to check then they ask what are you caling about so I try to explain my keychain is broken or problems with language security questions and can not change my pasword because the security question have failed me so it is ONE BIG HEADACHE AND I START I GET STRESSED she says Do want an ENGLISH speaker ,I say yes ,that guy i talked to earlier but I never got his name and first time I ever talked to him but they said he is not here so I said ok and then she said today is sunday so call back in the morning ,I said ,well ok in Japanese but they make you feel stupid because they do not want to speak Jap@anese with none natives and they are to busy,And they feel that I should not bother them ,then I say that Apple Japan is trying to refuse Apple foreign customers and then she wants to hang up and ask me to visit the shop ,but they are the same I have a very bad time with Apple Japan since they do not discuss software problems or security with customer meaning if you have a problem they ask you to come on a time 20 minutes max so they do hardware test and say you phone is fine then I say no I can not reset my ID they say you must call call centre so I am going around in circles ,When I call English it is usually Australia so if my problem is in Japan surely if do not want me to talk to them in Japanese and they ask me to call Australia but every time my call charge is expensive after asking them is this free because I have Apple care they say yes but when the call goes to Australia 0120 277 535 it might change to paid call so I call then I have to ask is this charging they say we can not give you that information ! so what can I do I have have been at the computer and phone all day on my day off work and in tre week I am so busy and can not use my phone I can not work without it ,this new technology for you ,they can not cope with the fact that the customer have problems yet they do not want to deal with us because they can not solve it and so it shows them to be useless they like to walk around in their cool tee shirts and retro shop but when it comes to functionality we are unwelcome they got the money so do not return because apple is perfect that nothing should go wrong .
    But it does somehow my English security answers do not work on a Japanese Question especialy if I did not choose that question I set  up the multiple choice In English and wrote the answers in English or Roman and set them langauge preferences in English, do you really think you can correctly write english name or word in Japanese they write a police patrol car  pato caa パトカア they do not have r and l .So it is my choice to make my security easy for me and as difficult for others to hack.But they also have patororoo choo meaning ' now patrolling ' so why they have pato caa patrol car and patoro patrol and have thousands of Chinese words kanji they can find patrol.
    I am getting off the topic but I am at a loss to fix this problem when they hold the keys and i have all the info to verify my ID.

    You have to enter the Apple ID and password. You are running into the Activation Lock
    iCloud: Find My iPhone Activation Lock in iOS 7
    Is there a way to find my Apple ID Name if I can't remember it?
    Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
    How do I change or recover a forgotten Apple ID Password?
    If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.

  • How can I change the display of Inbox in my iPad's mail app- so that it takes up the full screen?

    How can I change the display of Inbox in my iPad's mail app- so that it takes up the whole screen, as opposed to just about one third; the other two thirds display the full text of the selected email?

    You can't change the display in the Mail app, if you are holding the iPad in landscape orientation then the left-hand third will be for navigation, and the right-hand two-thirds will be an email. If you hold the iPad in portrait orientation then the navigation section becomes a drop-down section.

  • How can I change the age associated with my daughter's account?

    OK I am sure that this is a common issue.  Back when my daughter was about 9 or 10 years old, we bought her an iPod Touch.   She was too young to have an AppleID of her own, so I set one up for her using an extra gmail accoun that I had, and entered my birthdate/age.  A few years later, she received an iPad, and most recently, an iPhone.   All of these devices are tied to the same AppleID.
    Well, now she will be 13 years old soon, and I would like to switch things to represent reality.  She has her own email account, and I believe you can go to My Apple Id to change the Apple ID name and e-mail address.  My question is, can we change the age associated with the account?
    I hear you saying, "Just create a new AppleID for her."  That may end up being the only solution, but I am trying to avoid having two AppleIDs for her to keep up with.  She has already purchased a fair amount of content (music and apps) under the existing AppleID, and I am pretty sure from looking at the posts on this Community that you can not transfer content away from the AppleID under which it was downloaded/purchased.  And so, if I create a new AppleID, she will have to re-purchase the content to get it all in one place.  As she eventually grows up and becomes independent, I would like for he to not have to "start over" with her AppleID.
    Any advice or direction to information would be appreciated.

    I have a similar situation however a bit more complicated! It seems that when I was setting the birthdate I forgot to change the year so now my seven years old daughter shows up as a two months old! There is no way to change the birthdate because it shows up in light grey when I login into my daughters account and doesn't allow a change! The birthdate can be changed only when the child turns 13 however according to this she will have to be 20 before she can change it to show property 13 and here is where this is getting completely out of hand! Now to make things more complicated I have twin daughters and they came up with their unique but similar Apple ID, so changing one will require to change both Apple IDs! After being on the phone with Apple's customer support for about one hour I talked to a supervisor and the supervisor of the supervisor and their only solution is to create a new Apple ID! Of course in my case I will have to create two new Apple IDs, and I'm considering doing it. However when I started reading it becomes more complicated because I already made their Apple IDs part of my family group. It seems like you're not able to just let go of family member that is less than 13 years of age. You can only transfer it to another family, so Apple is making sure there are no kids left behind It seems like the only option will be to "abandon" the family and then create a new family with the new Apple IDs. If all this sounds bizarre to you it sounds bizarre to me too! If I can just put the kids in the car and drive them to the nearest one hour away Apple Store and have them show their credentials confirming their birthdate I would rather do that than having to spend more and more time with this issue, but that was not an option pointed out by customer support. So folks keep in mind that if you make a mistake your children's age is set in stone until he or she turns 20 if they happen to be seven at the time you made the mistake and no one can change this, even Apple! Now on the positive side I'm glad I didn't do the mistake when she was 13 or she will have to wait until she's 26 Most likely I'll be calling customer support tomorrow again and I will let you know how it went!

  • How can I change the background of a running webpage on my own. Example Facebook I want to change its backround color from white to black just in my view not for all

    How can I change the background of a running webpage on my own. Example Facebook I want to change its background color from white to black just in my view, not for all. Cause I really hate some site with white background because as I read for an hour it aches my eyes but not on those with darker background color.

    You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • I can not change the time in activity Appointment in WebUi

    Dear Experts!
    I can not change the time in activity Appointment when creating: calendar -> month -> click on the day
    snapshot of problem:
    http://imglink.ru/show-image.php?id=e7a096115a6371ffab46c701f8e470ba
    When I create a Appointment (Activities -> Create Appointment) of all good:
    http://imglink.ru/show-image.php?id=ef65a38bdf7fc77eb9a71ec5c3ad5603
    Help me this problem?

    You need to add that attribute using the config tool for your view configuration. Select the attribute All Day from the context node BTDATE in the available fields to your display field and then save it. It should now be visible in your UI and now you can select or uncheck it to make the time field enable. Check the below image
    http://imglink.ru/show-image.php?id=a9a660778c0fee2b3fd7409d620eddc5
    Regards,
    Shobhit

  • I ordered a battery for my laptop because it said to replace battery soon.  How long can I let the new battery sit around as I wait for the old one to run out of more charge?

    I ordered a battery for my laptop because it said to replace battery soon.  How long can I let the new battery sit around as I wait for the old one to run out of more charge?  Will the new one become less effective if it sits around too long?

    How much capacity is remaining on your current battery?
    Check your power status
    From the  menu: Hold OPTION and click System Information... èHardware è Power
    Copy and Paste in your reply.
    The new battery will become less effective if you store it in a hot or humid environment. It should be stored at room temperature (22 C).
    Long term storage (6 months):
    Apple recommends that you store the battery with a 50% charge. If you store a battery when it’s fully discharged, it could fall into a deep discharge state, which renders it incapable of holding any charge. Conversely, if you store it fully charged for an extended period of time, the battery may experience some loss of battery capacity, meaning it will have a shorter life.
    http://www.apple.com/batteries/

Maybe you are looking for

  • How can I open Adobe Bridge CS6 in high resolution on my MacBook Pro Retina display?

    How can I open Adobe Bridge CS6 in high resolution on my MacBook Pro Retina display? When I click Get Info, the "Open in Low Resolution" box is marked and locked. How can I unmark this box? I currently run 10.9.1. I can open Adobe Photoshop CS6 in hi

  • Reading a document from application server / opening in SAP session

    Hi guys, we  have a requirment has follows , please help me with your inputs. We have list of documents available in the DMS server....(XLS,DOC,PDF) 1. How to get the list of file names ( available in the DMS server )  into the internal table. 2. i n

  • Report on country specific CoA

    Hi All, When trying to pull the report from S_ALR_87012282 for country specific Chart of Accounts, we are getting the following error: "Company codes and charts of accounts entered are incompatible" Here are the steps we did: 1. Assigned operational

  • Need help in getting process form data

    Hi, We have one IT resource type definition say SSH. We have number of IT resources-abc,xyz of same type-SSH . When user gets provisioned to this resource, then in the resource profile, we can see resource name as SSH. In the process form of SSH we c

  • Invoive posting document not taking PRD G/L

    Dear friends I have one issue with my client. They have the coal material which has price control V. Earlier it is taken the Price difference G/L wrogly as Stores & Spares which was assigned in PRD. Now i have changed the G/L assignment at PRD as Pri