Tecra S2: check docking and automate Fn+F5

Hi,
I have a**Tecra S2 PM 730 1600 512MB 40GB DVD-CDRW 15,0"TFT WXPP*** Nvidia Chipset GO 6600
PN PTS20E-01J00LBT*
TOSHIBA PORT REPLICATOR 3** PN PA3314E-1PRP -*
s/n 34032428
******** Tecra S2: Centrino PM730/XP Pro/15.0
******** Agreement: FE065C7F
******** S/N: 55891330G
1) is there any possibility to check if the laptop is in the docking station and if yes I want to write a scrip that execute the Fn+F5 function. Is this possible?
2) is it possible to write the script that the function Fn+F5 will be executed before or on the same time as the windows logon occurs?
thanks for your help

Hello
Of course its possible to right software or a program to use the FN keys. The Toshiba programmers have written such software: hotkey utility or FN keys utility
But I dont know if its possible for extended people to right a script. I think you need detailed and inside informations to write such utility and these informations dont exist.
Furthermore I dont think that you will find a solution here in this forum because there are users who search for a solution for a common problems and issues.
Try to search in programmers forums for informations.
Bye

Similar Messages

Skip check no. in Automatic payment program F110

Dear Gurus,
I am facing problem while printing chek from F110.
Actually system is skipping the check no. from check lot and automatically voids the check no.
Ex.
1st system printing the check no. 10000 correctly but same time automatically void the next check no 10001 with void reason code 3. and again printing the check no. 10002 correctly for next vendor.
Regards
Rupesh Kumar Singh

Hi Rupesh,
The reason is if u go to RFFOUS_C program variant under data tab in F110 then in the bottom of the screen under output control, u need to tick option do not void any checks and also u need to remove the number of sample printouts.
If u do these two things then no checks will be voided.
I hope u understood.
Regards
Srikanth

How do I stop iTunes (10.7) from automatically launching upon restart? "Open at Login" is NOT checked in the dock and I have removed the app from Login Items under Users/Groups. I am using a MacBook version 10.7.5. Thank you!

How do I stop iTunes (10.7) from automatically launching upon restart? "Open at Login" is NOT checked in the dock and I have removed the app from Login Items under Users/Groups. I am using a MacBook version 10.7.5. Thank you!

Thanks for the response gakker, but I've double-checked the camera / iPhoto / Image Capture scenario, and I'm 100% positive it's got nothing to do with that.
Plugging in my iPhone has no effect on anything related to this.
The other thing I should have mentioned is that when iTunes on my Mac is NOT running, then nothing happens on my iPhone screen when I plug it in to my Mac. I only get the "Sync in progress" message when iTunes IS running.
It's interesting though that you say you also get this "Sync in progress" message, albeit only for a second or two though.
Can I just double-check something with you however... When you say:
+"at no time was my iTunes playback interrupted"+
do you mean the iTunes on your Mac? Because the problem I have is that the iPod-playback on my iPhone is interrupted.
So can you clarify that for me, please? If you have music playing on your iPhone, and you then plug your iPhone into your Mac when iTunes is running on your Mac, does the music playback on the iPhone get interrupted?

I uploaded to Maverick and now my mail always cc's me on every email I send out. I have checked Preferences and the Composing Automatically CC button is unclicked. How can I stop this?

I uploaded to Maverick and now my mail always cc's me on every email I send out. I have checked Preferences and the Composing Automatically CC button is unclicked. How can I stop this?

Sounds like your phone has the jitters.
This is sometimes caused when a DLL fle is missing when you restore, so the ipsw pacakge wasn't installed corectly.
You could back up and restore, but if it doesn't help go to http://www.felixbruns.de/iPod/firmware/ and then download the same firmware your on.
Open up iTunes and hold Shift+Restore and select that firmware, you can't use anoy ther firmwares though.
Hope this helped

I have multiple iPhoto libraries and when I selecting which library to view (hold down 'option' key and launch iPhoto from the dock) it automatically closes another open apps window eg. Chome, Word. 1 app closes every time I launch iPhoto this way.

I have multiple iPhoto libraries on my Macbook Air 10.7.5 and when I am selecting which library to view (hold down 'option' key and launch iPhoto from the dock) it automatically closes another open application window eg. Chome, Word. 1 app closes every time I launch iPhoto this way.

If you're pushing Option at the exact moment you're clicking the Dock icon, it's supposed to do that. Wait until just after clicking it.
(112342)

My iPod cannot turn on, however it can when it is on my iPod dock. It won't even sync into my computer. Once I take it off of my dock it automatically turns black and I can't turn t on. How can I get it back to normal?

My iPod cannot turn on, however it can when it is on my iPod dock. It won't even sync into my computer. Once I take it off of my dock it automatically turns black and I can't turn t on. How can I get it back to normal?

Does your home button work?

OSX 10.6 .8 -- Firefox automatically starts when I boot up (MacBook Pro Intel). It is not in the Startup Items in System Preferences, and automatic startup is not checked in Firefox Options. Don't know where else to look.

How do I keep Firefox automatically starts when I boot up (OSX 10.6 .8 -- MacBook Pro Intel). It is not in the Startup Items in System Preferences, and automatic startup is not checked in Firefox Options.

Hi fullrun-
Once Firefox is open, you should be able to open the Right click context menu on the icon. From there you select 'Options' and then de-select 'Open at Login'. Hope that helps.

We have three discussions forums with same subject. whenever a post gets new reply in one forum, it should automatically trigger workflow functionality to check conditions and send the same reply to other synchronized forums.

we have three discussions forums with same subject. whenever a post gets new reply in one forum, it should automatically trigger workflow functionality to check conditions and send the same reply to other synchronized forums.
Rajiv Kumar

Hi,
More details about your discussions forum will make others easier to find a corresponding solution on your requirement.
If you mean there are three Discussion Board list waiting for synchronizing, I would suggest you create an Event Receiver for the three Discussion Board list.
Here is a link with code demo about how to copy items from one Discussion Board to another including Replies:
http://spcodes.blogspot.com/2013/03/programmatically-copy-items-from-one.html
Here is a step by step sample on creating a simple Item added event receiver for Custom List in SharePoint 2010:
http://msdn.microsoft.com/en-us/library/ff398052.aspx
More information on Event Receiver for your reference:
http://msdn.microsoft.com/en-us/library/gg749858(v=office.14).aspx
http://msdn.microsoft.com/en-us/library/ff408183(v=office.14).aspx
Feel free to reply if there are still any questions.
Best regards
Patrick Liang
TechNet Community Support

SAP Bundle Patches and Automatic Oracle parameter check script (note117165)

After reading SAP note 1027012 on SAP Bundle Patches and SAP note 1171650 on the
automatic Oracle parameter check script I have a simple question:
Is it still necessary to manually check whether some patch is installed in order to determine
exactly which event and fixcontrol to set?
Or is the automatic Oracle parameter check script so sophisticated that it is fully
sufficient to implement its recommendations, and you don't neet to manually
check any more which SBP with which bugfixes has been installed?
It would be great if SAP could confirm that the automatic parameter check is sufficient,
but so far I haven't seen this statement explicitly. I believe this is mostly because it
is so difficult (impossible?) to determine via SQL which patches have been applied.
Regards,
Mark

>
> Is it still necessary to manually check whether some patch is installed in order to determine
> exactly which event and fixcontrol to set?
Yes and No.
until now, fixcontrol are dependent of CBO patches and those are "register" on the view v$system_fix_control. They can be "check" autmatically, so you get the "proper" recommendation for those.
the parameter event depends on different situations, like some patches. But those patches are "normal" patches and it is not possible to check if they are installed from inside the DB with a simple script. For those, the check script will tell you to do it manually and will tell you which patch has to be check
In addition, there are other parameters that have to be check "manually", like processes (where you get a "semiautomatic" check) or db_cache_size, where you should check if the size
> It would be great if SAP could confirm that the automatic parameter check is sufficient,
> but so far I haven't seen this statement explicitly. I believe this is mostly because it
> is so difficult (impossible?) to determine via SQL which patches have been applied.
The automatic parameter check is sufficient, meaning that you get all information, including the parameters that you have to check manually and some information for that check. Currently, it is not possible to automatize it 100%

I've updated my Flash software but Firefox still reports it as outdated and automatically deactivates it. How can I fix this?

Firefox says that my Flash software is outdated and therefore vulnerable and automatically deactivates the software. When Firefox recognizes that I'm visiting a page that uses Flash for something it will give me a grey (typically) diagonally striped screen in the place where the Flash would be used with the option of "activating" Flash. But sometimes there are items on webpages that used to show up (and I guess use Flash) that, since this problem started, I can't see. It's also kind of a nuisance to have to activate it each time. But, ultimately, it's somewhat worrying that I've downloaded and installed the latest version of Flash a couple of times and it's still doing this. I'm not really sure what else to do.
Some background on what I'm working with. I'm running Firefox 23.0 and the "About Firefox" screen says I'm up to date. I'm running Mac OS X 10.6.8. When I go to the add-on page for Firefox, it tells me that the version of "Shockwave Flash" is 11.4.402.265. The package that I've downloaded and installed from the Adobe website is here: http://get.adobe.com/flashplayer/completion/?installer=Flash_Player_11_for_Mac_OS_X_10.6_-_10.9.
Any thoughts?

hello, if the plugin-check page shows that you're still on version 11.4 something is wrong - 11.8.800.94 is the latest version that's avilable for your system. does the adobe support page for flash installation issues help?: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html

I have three Safari icons. Two in the dock and one on the desktop. How do I eliminate them?

I have three Safari icons. Two in the dock and one on the desktop. How do I eliminate them?
One from the dock and the one on the desktop.

nezzer wrote:
the desktop item will not delete or "move to trash"
In Finder, select the item. Choose File > Get Info (or do ⌘I). Look under General > Kind. Does it read "Alias" or does it read "Application (Intel)"?
If the latter, then it is likely that you're not allowed to delete because it's actually open. Quit Safari. Check if there is an item called Safari in your </Applications> folder. (In Finder, you can get directly to the Applications folder using ⇧⌘A -- that's Shift-Command-A.) Check if it's an application. If it is, then you have an unneeded copy of Safari. You can delete the one on your Desktop. If there isn't, them move the one on the Desktop to the Applications folder -- that's where it belongs.
If you're new to the Mac, consult
Mac 101
<http://www.apple.com/support/mac101/>
If you're coming in from the Dark Side, consult
Switch 101: On Windows, I used to...
<http://support.apple.com/kb/HT2514>

I can't seem to get mountain lion to download. It just sits in my dock and won't load. Tried starting in safe mode an reloading - still won't work.

Very frustrated. I can't sync my music with my phone because apparently there is a bug in the version of iPhoto I have. So I tried to update to the latest and was told it's incompatible with my OS. So I decided to shell out the $20 for Mountain Lion (even though I feel I shouldn't have to since the software I'm using isn't working). Now the download of Moutain Lion just sits in the dock and won't download. I tried restarting the computer in safe mode and redownloading, still no luck.

Edit --> Preferences --> Media and Disk Cache --> Purge. And you might wanan consider substituting any compressed audio sources with WAVs, too, to avoid such corruptions. Similarly, check your audio in a proper audio editing app. Odd sample rates, weird channle mapping and so on can have all sorts of ill effects.
Mylenium

Thinkpad X1 Mouse Issues with USB 3.0 Dock and WIndows 8.1

I have a new X1 (3444-CUU) that I recently upgraded to Windows 8.1. When I connected to the Thinkpad USB 3.0 Dock, there was an automatic updated of the firmware on the docking station.
Everything seems to be working except issues with my Keyboard and Mouse.Periodically, the mouse will disappear of the keyboard will simply stop working. Most recently, it was as if the delete key was stuck causing it to delete all my email (actually a feature I liked but unfortunately, can't allow).
Is there a known issue with wireless keyboard?

I have a possibly similar issue that seems to be related to the keyboard dock. In my case this is with logitec unified receiver, but what I found may help you narrow the issue's root cause.
I found that after a reboot, the dock's USB ports (bothh SS or USB 3.0) will not recognize logitech's unified receiver. Even though it is Windows reporting it, it seems to be related to the hardware. What I do to have minimally invasive 'functioning' system is to undock the Helix (use as tablet). This makes the genuine USB 2.0 port of the tablet accessible. I then plug the receiver into that port and wait until the mouse is recognized. Then remove the receiver, re-dock the tablet on the keyboard dock and plug the receiver into the dock's usb 3.0 port. Then everything works.
That seems to somehow circumvent part of the refreshing of the USB connected devices and allows them to work correctly.
I wonder if that addresses your issue. Of course I am opening another thread and ticket with that issue (will post a link after that)

How to get batch job o/p in PDF format and automatically saved to xyz loc

Hi Experts,
Our requirement is we want output of background job in PDF format and this PDF generated should be saved in some xyz path at OS level.
Why doing this?: Business don't want hard copy o/p of some batch jobs but only want to save this output in pdf format to some OS location for future use.
We could achieve above objective by archiving method (but for some reason we cant adopt it).
So guys please propose solution in detail regarding above problem "how to get o/p in PDF format and automatically get saved to xyz location"
System : 4.0B
OS : Windows NT
Database : Oracle
Thanks in advance

Hi guys,
Thanks guys for your invaluable advise.I asked abaper to use the above report for pdf conversion. But I have another problem that o/p of batch job should come in japanese language but when i check spool or hard copy o/p its not coming in readable form (seems something like machine language) . I dont what is the reason there must be some basis setting to get the batch job o/p in japanese language.
Please help me.
thank you

Just bought Adobe Photoshop Ps , clicked on the icon in my Mac dock and am staring at a black page with a perimeter of symbols and a heading that reads "Adobe Photoshop CC 2014. I don't have a clue what I do next. I would like to transfer some photos fro

Just bought Adobe Photoshop Ps , clicked on the icon in my Mac dock and am staring at a black page with a perimeter of symbols and a heading that reads "Adobe Photoshop CC 2014. I don't have a clue what I do next. I would like to transfer some photos from my iPhoto library. Where do I start?

Photoshop does not transfer files nor import files. It can open files from any place that finder can access for files.
This is the normal process:
You need to log into https://www.adobe.com/creativecloud/catalog/desktop.html Download Center
Select the app you would like to start with
The Creative Cloud manager will install first.
When done installing, the Creative cloud (adobe manager) should open in the middle of your screen.
If no apps automatically start installing then click on Apps
Scroll down to the app you want to install and click the install button
Once the manager says it is done, you can start your app like you normally do with any other app.

Tecra S2: check docking and automate Fn+F5

Similar Messages

Maybe you are looking for