Tecra S3 - Windows 2000 hangs during reboot

Hello all
I a have a Tecra S3 dual booting Windows XP and 2000, with the proper RAID driver installed for each one.
In Windows 2000, it hangs during any reboot. It is necessary to power the computer off and on in order to complete the reboot.
This problem does not happen in Windows XP and DOS. Is there anybody else using Windows 2000 with this model ?
Thanks,
Rubens

Hi
Well, its not easy to say why this issue occurs. I assume that you have installed the W2k from the original Windows CD. In this case its very important that you install the Toshiba driver, tools and utilities in the right order.
On the Toshiba download page I have found a installation instruction for W2k. This list gives you a information about a right driver installation. Please check this document.
Bye

Similar Messages

My Ipad2 hang during reboot.what should i do?

My ipad2 hang during reboot. The screen show the apple logo long time already!what should i do? I try already press the home button & sleep button together , still not work! What should i do?anybody can help me?

http://support.apple.com/kb/HT1808

Windows 7 hangs during install on HP Pavilion a Media Center 1320n

Windows XP Media is currently on machine. I tried to install Windows 7 Ultimate Edition. When the computer rebooted the installation would hang during the complete installation. I tried several times and the same thing happened. I reformated the hard drive and tried to install the same OS using a USB flash drive and got the same results. I reformatted again and tried to install Windows Vista Ultimate Edition and got the same results. The only OS I can install on this machine is Windows XP. Can anyone tell me what needs to be done to install Windows 7.
I upgraded the Bios with version 3.24 before I began the installation.

Another update in case anyone might be having the same problem.. Found out what the problem is.. But still have not resolved it.. I did another fresh install of Win7. Joined the domain and rebooted. When it came back up I checked the network and sharing center. It is showing "Identifying". Start> Run> firewall.cpl . It is showing Public network as my current connection. I unplugged my network cable and plugged it back in. It now shows domain network. Log offs work fine. After reboot it goes back to doing the same thing. I tried with both DHCP and a static IP. Both ways, same problem. So it works fine if the location is set to domain network but not to public (which i guess it automatically puts it in to if it cant identify the network). Sometimes it will go to work network. Logoffs take roughly 30 seconds compared to 8 min. on a public network or 2 seconds on a domain network.
We do have a group policy that disables security center. It will disable the firewall and other features when it is set to domain network. But not for the work or public locations.
The other policy we have in place is for Kerberos. Kerberos is disabled by default in windows 7 but is needed for our SAP to work. When we run a packet sniffer on the machine it is showing a lot of back and forth traffic with our DC and the protocol just shows Kerberos. So my next test is to remove the GPO for Kerberos and see if that makes a difference.
The funny thing is; I have a Precision 380 sitting right aside of it. Running Windows 7, joined to the same domain, connected to the same switch, in the same OU and it doesnt have a problem..

Sqlldr80 on windows -2000 hangs

whenever we try to executte sqlldr80 on Windows 2000,it hangs ,any soulution?
Thanks!
Sunil
null

Sunil,
Please go to http://metalink.oracle.com to file a bug report.
Regards,
Geoff

SL hangs during reboot, need to power-cycle

Hi,
I've upgraded my 10.5 machine to 10.6. Now my machine does not reboot anymore. It hangs on a blue screen with the spinning wheel. I have to turn my Mac off to get it back on.
Upgrading to 10.6.1 did not resolve this issue.
Before the upgrade to 10.6 the machine rebooted just fine.
Any ideas what might be wrong?
Thanks

If you have anything connected to your USB ports (or firewire ports) you might want to try and disconnect them and try booting again. My problem was a slow shut down with the little cartwheeling going like crazy for a while. You could guarantee that if you had the slow shut down then there was a problem booting the computer. Once I disconnected the two external drives everything works OK.

Help needed: Lion Server hangs during reboot (Symbol not found: _kCUIMaskOnlyKey)

Hi,
I not sure if this is the right forum but hopefully someone might be able to help.
Yesterday I was configuring my local mail system. (Local IMAP server and I checked the access from WLAN and Internet. Everything seems to
work fine until I noticed, that mails from my inbox would disappear automatically after a couple of seconds. I switched all mail clients (iPhone, ...) of,
sent a test mail - but the problem stays. I had no idea what was going on. So I decided to reboot the system. The system came up again and I logged in.
It looked like a fresh desktop was created and Safari wanted to make changes to the system. I decided to roll back the system and reinstalled it from
a backup before I made all the changes. After restoring the system hangs with the gray screen. I tried a reboot in save mode - same result. Then
I rebooted in single user mode. The file system looked OK, but I found many crashes in the system logs. Continuing to multi user mode did not succeed.
I received all the crash logs on the console.
Next I removed the disk and connected it to my laptop. I have extracted the last couple of line from the system log file:
Feb 26 00:58:44 localhost ReportCrash[55]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/xpchelper_2012-02-26-005835-1_l ocalhost.crash
Feb 26 00:58:44 localhost com.apple.xpchelper.00000000-0000-0000-0000-000000000000[721]: dyld: Symbol not found: _kCUIMaskOnlyKey
Feb 26 00:58:44 localhost com.apple.xpchelper.00000000-0000-0000-0000-000000000000[721]:   Referenced from: /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
Feb 26 00:58:44 localhost com.apple.xpchelper.00000000-0000-0000-0000-000000000000[721]:   Expected in: /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
Feb 26 00:58:44 localhost com.apple.xpchelper.00000000-0000-0000-0000-000000000000[721]: in /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
Feb 26 00:58:44 localhost com.apple.launchd[1] (com.apple.applepushserviced[697]): Job appears to have crashed: Trace/BPT trap: 5
Feb 26 00:58:44 localhost com.apple.launchd[1] (com.apple.applepushserviced): Throttling respawn: Will start in 9 seconds
Feb 26 00:58:44 localhost ReportCrash[55]: Saved crash report for applepushserviced[697] version ??? (???) to /Library/Logs/DiagnosticReports/applepushserviced_2012-02-26-005844_localhost.c rash
Feb 26 00:58:44 localhost ReportCrash[55]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/applepushserviced_2012-02-26-00 3929_localhost.crash
Feb 26 00:58:45 localhost com.apple.launchd[1] (com.apple.PasswordService[699]): Job appears to have crashed: Trace/BPT trap: 5
Feb 26 00:58:45 localhost com.apple.launchd[1] (com.apple.PasswordService): Throttling respawn: Will start in 9 seconds
Feb 26 00:58:45 localhost ReportCrash[55]: Saved crash report for PasswordService[699] version ??? (???) to /Library/Logs/DiagnosticReports/PasswordService_2012-02-26-005845_localhost.cra sh
Feb 26 00:58:45 localhost com.apple.launchd[1] (com.apple.softwareupdatecheck.initial[700]): Job appears to have crashed: Trace/BPT trap: 5
Feb 26 00:58:45 localhost com.apple.launchd[1] (com.apple.softwareupdatecheck.initial): Throttling respawn: Will start in 9 seconds
Feb 26 00:58:45 localhost ReportCrash[55]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/PasswordService_2012-02-26-0035 06_localhost.crash
Feb 26 00:58:45 localhost ReportCrash[55]: Saved crash report for SoftwareUpdateCheck[700] version ??? (???) to /Library/Logs/DiagnosticReports/SoftwareUpdateCheck_2012-02-26-005845_localhost .crash
Feb 26 00:58:45 localhost ReportCrash[55]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/SoftwareUpdateCheck_2012-02-26- 003020_localhost.crash
Feb 26 00:58:45 localhost com.apple.launchd[1] (com.apple.xpchelper.59000000-0000-0000-0000-000000000000[714]): Job appears to have crashed: Trace/BPT trap: 5
Feb 26 00:58:45 localhost com.apple.xpchelper.59000000-0000-0000-0000-000000000000[722]: dyld: Symbol not found: _kCUIMaskOnlyKey
Feb 26 00:58:45 localhost com.apple.xpchelper.59000000-0000-0000-0000-000000000000[722]:   Referenced from: /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
Feb 26 00:58:45 localhost com.apple.xpchelper.59000000-0000-0000-0000-000000000000[722]:   Expected in: /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
Feb 26 00:58:45 localhost com.apple.xpchelper.59000000-0000-0000-0000-000000000000[722]: in /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
Feb 26 00:58:45 localhost ReportCrash[55]: Saved crash report for xpchelper[714] version ??? (???) to /Library/Logs/DiagnosticReports/xpchelper_2012-02-26-005845_localhost.crash
Feb 26 00:58:45 localhost ReportCrash[55]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/xpchelper_2012-02-26-005835-2_l ocalhost.crash
Feb 26 00:58:45 localhost com.apple.launchd[1] (com.apple.xpchelper.00000000-0000-0000-0000-000000000000[721]): Job appears to have crashed: Trace/BPT trap: 5
Feb 26 00:58:45 localhost com.apple.xpchelper.00000000-0000-0000-0000-000000000000[723]: dyld: Symbol not found: _kCUIMaskOnlyKey
Feb 26 00:58:45 localhost com.apple.xpchelper.00000000-0000-0000-0000-000000000000[723]:   Referenced from: /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
Feb 26 00:58:45 localhost com.apple.xpchelper.00000000-0000-0000-0000-000000000000[723]:   Expected in: /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
Feb 26 00:58:45 localhost com.apple.xpchelper.00000000-0000-0000-0000-000000000000[723]: in /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
Feb 26 00:58:45 localhost ReportCrash[55]: Saved crash report for xpchelper[721] version ??? (???) to /Library/Logs/DiagnosticReports/xpchelper_2012-02-26-005845-1_localhost.crash
Feb 26 00:58:45 localhost ReportCrash[55]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/xpchelper_2012-02-26-005835_loc alhost.crash
Feb 26 00:58:46 localhost com.apple.launchd[1] (com.apple.xpchelper.59000000-0000-0000-0000-000000000000[722]): Job appears to have crashed: Trace/BPT trap: 5
Feb 26 00:58:46 localhost com.apple.xpchelper.59000000-0000-0000-0000-000000000000[724]: dyld: Symbol not found: _kCUIMaskOnlyKey
Feb 26 00:58:46 localhost com.apple.xpchelper.59000000-0000-0000-0000-000000000000[724]:   Referenced from: /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
Feb 26 00:58:46 localhost com.apple.xpchelper.59000000-0000-0000-0000-000000000000[724]:   Expected in: /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
Feb 26 00:58:46 localhost com.apple.xpchelper.59000000-0000-0000-0000-000000000000[724]: in /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
Feb 26 00:58:46 localhost ReportCrash[55]: Saved crash report for xpchelper[722] version ??? (???) to /Library/Logs/DiagnosticReports/xpchelper_2012-02-26-005846_localhost.crash
Feb 26 00:58:46 localhost ReportCrash[55]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/xpchelper_2012-02-26-005836-1_l ocalhost.crash

Had the exact same problem yesterday on my mid-2010 Mac Pro with OS X 10.7.3 Server. Formatted my SSD boot drive and restored via time machine and I had the exact same error.
Here is how to solve it. Download from the apple site the OSX10.7.3ServerComboUpdate.dmg. I downloaded using my laptop. Extract the dmg and get the pkg file inside. Put it on a usb drive. Boot your broken OS X system in recovery mode(option key as you boot up, choose Recovery HD). Open the Terminal(don't use the single user mode,the following command did not work from there). If your OS X installation is Macintosh HD type the following(assuimg your USB disk is called USB,otherwise change it):
# cd /Volumes/Macintosh\ HD\
# mkdir update
# cd update
# cp /Volumes/USBDrive/*.pkg .
# installer --verbose -pkg MacOSX10.7.3ServerComboUpdate.pkg -target "/Volumes/Macintosh\ HD"/
When it finishes reboot and your OS X will boot normally.
Hope that helped.

11.5.9 with win 2000 hangs during statspack

Dear All,
I started statspack, upon starting of SQL> @spcreate.sql Oracle application hangs and users are unable to work, then i restarted the serviecs, now its working fine but it is happend 2 times on the same point.
spcreate.sql scripts completed successfully.
default tablespace: FERFSTAT
temp tablespace: TEMP
How i can diagnose, basically what was the problem.

Check the following spool files for any reported errors:
- spctab.lis
- spcpkg.lis
- spcusr.lis

Wiping with a disc toshiba tecra 8000 windows 2000 professional

I want to recycle an old laptop (see subject line) and would like to wipe it clean first. I have a "wipe" disc from the tech guys at work but the directions they gave me do not work with this old laptop. Can anyone tell me how to wipe clean the above-captioned laptop with a disc or any other way. thanks.

If your optical drive will boot from a CD, download Active@ KillDisk 9 (Windows) freeware from here.
-Jerry

Windows 2000 won't start after iTunes 7.3 upgrade

Yesterday I upgraded to iTunes 7.3 and after the required reboot, windows 2000 hangs on its startup screen. I can boot from the windows 2000 CD and login to the win2k installation on the hard disk using the admin password, but I don't know how to uninstall iTunes from the recovery console. Any ideas?
Dell Dimension 4100 Windows 2000

Was not able to uninstall easyCD creator, but did get windows to start again by following the directions below from the website listed below. Lots of work still ahead to get it back to normal, but at least I didn't lose all my data.
http://forums.techguy.org/windows-nt-2000-xp/127361-help-inaccessiblebootdevice-stop-0x0000007b-blue.html
Method 1: Use a Backup Registry System Hive to Edit the Registry
Use the Windows 2000 CD-ROM to start the computer.
If you need a third-party hard disk controller, press S to specify an additional device, and then insert the floppy disk that contains the correct driver for the hard disk controller.
Press R to repair a Windows 2000 installation.
Press C to use the recovery console.
Log on to the Windows installation that you want and type the Administrator password.
Change to the %windir%\System32\Config\ directory. To do this, type the following command at the C:\Winnt prompt (where C: is the drive and Winnt is the directory where Windows 2000 is installed), and then press ENTER:
chdir system32\config
Type ren system system.old, and then press ENTER.
Type copy C:\winnt\repair\system, and then press ENTER. The following information appears:
1 file(s) copied.
Type exit, and then press ENTER to quit the recovery console and restart Windows.

KT4V & Windows 2000 startup hang

Everything works fine, except during the Windows 2000 splash screen, the blue bar gets to half way, then the computer hangs there for about a minute or two, then boots.
Everything seems to work fine and its fast.
I can't figure out why its hanging like this.
I've tried about every BIOS setting there is. I've reloaded Windows 2 or 3 times. Changed the video card (no other cards in system). Turned off the built in LAN.
Changed memory.
Using:
Windows 2000 SP3
Maxtor 20G
AthlonXP 2200
2x256MB=512MB
Any ideas?
I was gonna try installing Win2K with SP1. Then update from there.

After 2 days of headache it came down to this motherboard not wanting/liking an Afreey 8x DVD/CDROM player.
It does not like this reader, period.
Case closed...

SAP WAS 6.40 installation hangs up on Windows 2000 Pro. sp4

Hi all,
    I am facing an issue while installing SAP WAS 6.40 Preview on Windows 2000 sp4 prof. During "MaxDB Database Internal Installation (post processing)" phase, the installation process hanged up.
Configuration :
   P4 2.4 GHz
   512 MB RAM
   j2sdk 1.4.2_05
Can anybody please help me out on this.

Hi Chiranjeevi
Here are the steps
Wizard page name   | Actions to be done in this page
1)Welcome          |   Select "SAP NetWeaver '04 Support Release 1/Java System/MaxDB/Central System/Custom Installation - Java System"
General Parameters | Keep the default values (J2E as the SAP System and Database ID, your hostname as the database host and C: as the installation drive)
CD Browser         | Enter <EXTRACT_DIR>\WebAS in the field "Package Location"
Java Development Kit | Enter the location of your local JDK installation (e.g. C:\j2sdk1.4.2_06).
SAP Java Cryptographic Toolkit | Select "Weak Cryptography Level" (as the strong cryptography is not included in this sneak preview).
Windows Domain Select | "Local installation"
OS User Passwords Use admin for both passwords
SCS Instance Keep the default values
Central Instance | Keep the default values
UME Configuration | Select "Use Java system database"
J2EE Engine Passwords | Use admin as the Administrator and SDM password and guest as the Guest password
Database Schema | Again use admin as the password
SLD Choose | "No SLD available"
CD Browser | Enter <EXTRACT_DIR>\MaxDB in the field "Package Location"
MaxDB > Installation Drives | Keep the default values (C: as the installation drive for MaxDB program and database files)
MaxDB > Database Parameters | Keep the default values
MaxDB > Log Volumes   | Select a drive of your choice (or keep the default one) and enter 1000 in the column "Size [MB]"
MaxDB > Data Volumes | Select a drive of your choice (or keep the default one) and enter 1000 in the column "Size [MB]"
Start Execution This page displays a summary of the previous settings. Press "Start" to start the installation.
Note Chiranjeevi It takes some time to install it
and user the jdk1.4.2+08 version
<EXTRACT_DIR> means the directory where u have unzipped the SAP WAS SP9
If you have any problem you can mail me at [email protected]
Sai

9.2.0.1.0 install hang at loading product on windows 2000 server SP4

When I am trying to install Oracle Enterprise server 9.2.0.1.0 on a Windows 2000 server SP4 freshly installed
The OUI hang when loading product @ 91% on the "File Location" screen !
This is not the symcjit.dll prob with P4 computer because I have upgrade the P4 motherboard drivers and I have tried the solution which is to rename this file and it is not working
Any URGENT idea ?
Thx

I have installed 9i successfully on machines with AMD64 cpus and 64bit Xeons without any problems.
Cheers,
R

Hanging problems with JRE 1.4.0 and Windows 2000

We have written a Java application which is an editor using Swing components. Most of us happily run it on Windows 2000 PCs with a decent PC spec of 512 Mb RAM and 1 Gb Processors and Java JDK 1.4.0 installed. However, other users with smaller spec PCs of 128 Mb RAM and 450 MHz processors and using only the Java Runtime Environment v1.4.0 keep making the application hang.
I've done plenty of debugging and investigation and am now convinced that this is not our application software that is causing the problems - the hangs are never consistent in their behaviour. I don't think that lack of memory is the problem either as it hangs with no other application running and it only uses a small amount itself.
So what could cause this problem ? Is there a significant difference between using the JDK and JRE ? Could it be PC spec ? Are there some config settings that I should check ?
Any help would be appreciated as the application has become unusable for our users when we seem to be having no problems at all !
Sarah.

I have been tring to track down a similar problem for quite some time, with no luck as of yet. On 4 out of 6 machines running Windows 2000 Pro, any application that I write using any graphical component AWT or Swing, will hang at run time using JDK 1.4. I have no solution for you but I am hoping this message might spark some more advice.
Bryan

DBA Studio 8.1.7 hangs at start on Windows 2000

When I run DBA Studio 8.1.7 on my Windows 2000 machine, it nearly always hangs at the "Enterpise Manager" splash. Usually, I can leave it hung there and start another instance successfully. But not always.
This did not happen under 8.1.6.
I'm running Oracle 8i Personal Edition.
Any suggestions?
Thanks.
Greg Ashmore
null

Solved by destroying all Oracle files and registry keys and reinstalling.

10g (10.2.01) setup/java.exe hangs on Windows 2000 SP4.

Hi all,
I'm currently having an issue with a 10g install on Windows 2000 (SP4) hosted on a Windows Virtual Machine.
I remote to this machine using PCAnywhere.
When I run setup.exe it just hangs on the java.exe process.
I have run the setup with a -debug option and am not seeing anything out of the ordinary.
I have also checked the the log and it does not seem to contain any errors.
I have run through the 10g pre installation requirements and don't believe that is a problem as the
machine and OS meets all the criteria.
I have researched a similar setup.exe/java.exe hanging issues and have tried some of those solutions to no avail.
For instance moving the 10g the install folder to C: drive and confirming there are no spaces in the install path.
Increasing the JRE memory allocation to 1024 in oraparam.ini
Log file contents:
Using paramFile: C:\10g_Client_10201\install\oraparam.ini
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
The commandline for unzip:
C:\10g_Client_10201\install\unzip ../stage/Components/oracle.swd.jre/1.4.2.8.0/1/DataFiles/"*.jar" -d "C:\Temp\OraInstall2008-10-21_04-54-08PM"
The commandline for unzip:
C:\10g_Client_10201\install\unzip ..\stage\Components\oracle.swd.oui\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\Temp\OraInstall2008-10-21_04-54-08PM"
The commandline for unzip:
C:\10g_Client_10201\install\unzip ..\stage\Components\oracle.swd.oui.core\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\Temp\OraInstall2008-10-21_04-54-08PM"
The number of files bootstrapped for the jre is 584.
The number of files bootstrapped for the oui is 100.
Total args: 23
Command line argument array elements ...
"C:\Temp\OraInstall2008-10-21_04-54-08PM\jre\1.4.2\bin\java.exe"
-Doracle.installer.library_loc="C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\lib\win32"
-Doracle.installer.oui_loc="C:\Temp\OraInstall2008-10-21_04-54-08PM\oui"
-Doracle.installer.bootstrap=TRUE
-Doracle.installer.startup_location="C:\10g_Client_10201\install"
-Doracle.installer.jre_loc="C:\Temp\OraInstall2008-10-21_04-54-08PM\jre\1.4.2"
-Doracle.installer.exec_location="C:\10g_Client_10201\install\oui.exe"
-Doracle.installer.nlsEnabled="TRUE"
-Doracle.installer.prereqConfigLoc=""
-mx1024m
-cp
"C:\Temp\OraInstall2008-10-21_04-54-08PM;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\OraInstaller.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\oneclick.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\xmlparserv2.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\srvm.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\share.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\OraInstallerNet.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\xml.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\orai18n-collation.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\orai18n-mapping.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\emCfg.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\ojmisc.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstImages.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_de.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_es.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_fr.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_it.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_ja.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_ko.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_pt_BR.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_zh_CN.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_zh_TW.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\oracle_ice.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\help4.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\help4-nls.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\ewt3.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\ewt3-swingaccess.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\ewt3-nls.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\swingaccess.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\classes12.jar;\;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\OraPrereq.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\jewt4.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\jewt4-nls.jar"
oracle.sysman.oii.oiic.OiicInstaller
-scratchPath
"C:\Temp\OraInstall2008-10-21_04-54-08PM"
-sourceLoc
"C:\10g_Client_10201\install\../stage/products.xml"
-sourceType
network
-timestamp
2008-10-21_04-54-08PM
-debug

As Daniel stated on his previous post, this is not supported from the official oracle point of view, so if you are implementing this for production environments, even if it worked, you would be on your own. However, this should work. Check if you have any other java environment on the scope of the PATH environment variable. A virtual machine is from the OS configuration point of view the same as a physical machine, if the PATHs are scrambled and if you are accessing different versions of JRE at install time, this won't work, and the first symptom is a frozen java session.
~ Madrid
http://hrivera99.blogspot.com

Tecra S3 - Windows 2000 hangs during reboot

Similar Messages

Maybe you are looking for