Tehnical data tab in work centre.

HI
While creating work centre in technical data tab by mistake i input some value but now i am not able to delete those value as system is showing it as mandetory field.
Please help....
Thanks in advance.
Regards,
Anand

Hi Anand
First of all tell that if they r mandatory field; then unless u enter any value in them how could u save??
But in case u have entered some incorrect value and since it is mandatory; u are not able to delete it...Hope this is the case
Hence in order to make these fields as "non mandatory"; go to T Code OPFA and in that under technical group; change it from mandatory to input
Check this and revert
Rgds

Similar Messages

Want to remove Technical data Tab from Work Center

Hi All,
I want to remove Technical data Tab from Work Center. I have Removed ''Technical data'' Tab from Plant Maintenance and Customer Service-->Master Data in Plant Maintenance and Customer Service -->Maintenance Plans, Work Centers, Task Lists and PRTs >Work Centers>Configure Screen Sequence for Work Center.
Still I am able to see Technical Data Tab in IR01, Work center.
Is there any other config to remove the same?

This is resolved.
I have changed the config in following node as 0005 for PM
SPRO / IMG -> Plant Maintenance and Customer Service -> Master Data in Plant Maintenance and Customer Service -> Maintenance Plans, Work Centers, Task Lists and PRTs -> Work Centers->General Data->Define Work Center Types and Link to Task List Application

Work Centre Settings

Hi,
A person is authorized to add people in the work sentre through T-code IR02 but every time he is adding a person in the work centre it indirectly affects the HR Master Data.I have a business requirement which has to make sure that the changes to the data in the work centre should be independent of the HR Master Data and the data should remain the same before and after the changes.Is there anything i am missing on my part.
Regards
Madiha

Hi Madiha,
These changes reflecting were due to Dynamic Actions.check is there any DA is defined for this Work Centre field in the Table T588Z using TCode SM30. IF exist based on u r requirement De-Active those Statments and check.
Regards,
Narendra.

PP Work centres actual capacity Utilization

Dear All,
I want to have some information about the cube from which i can extract the data of PP work centre's capacity utilization. thanks

Hi Amir,
Did you try 0PP_C13?
Hope this helps,
Rgds,
Guru

WORK CENTRE IN EQUIPMENT MASTER DATA

Hello All,
In IE01 tcode > creation of equipment , pls tell me what is the relevance of work centre in location tab ??
Thanks,
Sunny

Hi
Work Center
Definition:Operations are carried out at a work center. In the R/3 System work centers are business objects that can represent the following real work centers, for example:
Machines, machine groups
Production lines
Assembly work centers
Employees, groups of employees
Use
Together with bills of material and routings, work centers belong to the most important master data in the R/3 production planning and control system. Work centers are used in task list operations and work orders. Task lists are for example routings, maintenance task lists, inspection plans and standard networks. Work orders are created for production, quality assurance, plant maintenance and for the Project System as networks.
Data in work centers is used for
Scheduling
Operating times and formulas are entered in the work center, so that the duration of an operation can be calculated.
Costing
Formulas are entered in the work center, so that the costs of an operation can be calculated. A work center is also assigned to a cost center.
Capacity planning
The available capacity and formulas for calculating capacity requirements are entered in the work center.
Simplifying operation maintenance
Various default values for operations can be entered in the work center.
Look at CR01 ,CR02,CR03 Transaction
table : CRHD Table
Reward points for useful Answers
Regards
Anji

"Data" tab no longer working

Version 1.5.0.53 Build MAIN-53.58, running on Mac OS X 10.5.2
All of a sudden, the "Data" tab for editing table data is no longer working. Clicking on it does nothing at all - no change in the icons, no apparent network activity - its as if you were just clicking on nothing.
It was working just fine, even after upgrading to the latest release. I did a clean install and still have the same issue. It's also occurring for multiple database connections.
Any thoughts or things to check?
- Scott -

Hey Barry! Hope all is well with you! Thanks for offering to help.
Here's the error that I get from the console:
Exception in thread "AWT-EventQueue-0" java.lang.NoSuchMethodError: oracle.sql.CharacterSet.encodedByteLength(Ljava/lang/String;)I
     at oracle.javatools.db.ora.OracleDatabaseDescriptor.validateName(OracleDatabaseDescriptor.java:240)
     at oracle.javatools.db.DatabaseDescriptor.isValidName(DatabaseDescriptor.java:76)
     at oracle.javatools.db.DatabaseDescriptor.quoteIdentifier(DatabaseDescriptor.java:246)
     at oracle.javatools.db.AbstractDBObjectProvider.quoteIdentifier(AbstractDBObjectProvider.java:1224)
     at oracle.dbtools.db.DBUtil.addQuotes(DBUtil.java:1300)
     at oracle.dbtools.raptor.oviewer.table.DataEditor.open(DataEditor.java:346)
     at oracle.ideimpl.editor.EditorState.openEditor(EditorState.java:244)
     at oracle.ideimpl.editor.EditorState.createEditor(EditorState.java:152)
     at oracle.ideimpl.editor.EditorState.getOrCreateEditor(EditorState.java:94)
     at oracle.ideimpl.editor.SplitPaneState.canSetEditorStatePos(SplitPaneState.java:231)
     at oracle.ideimpl.editor.SplitPane.setCurrentEditorStatePos(SplitPane.java:1220)
     at oracle.ideimpl.editor.SplitPane$1.valueChanged(SplitPane.java:132)
     at oracle.ide.controls.customtab.CustomTab.fireSelectionChange(CustomTab.java:292)
     at oracle.ide.controls.customtab.CustomTab._setSelectedPage(CustomTab.java:604)
     at oracle.ide.controls.customtab.CustomTab.setSelectedPage(CustomTab.java:566)
     at oracle.ide.controls.customtab.CustomTab.selectPageAt(CustomTab.java:619)
     at oracle.ide.controls.customtab.CustomTab.mousePressed(CustomTab.java:969)
     at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:221)
     at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:221)
     at java.awt.Component.processMouseEvent(Component.java:5599)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
     at java.awt.Component.processEvent(Component.java:5367)
     at java.awt.Container.processEvent(Container.java:2010)
     at java.awt.Component.dispatchEventImpl(Component.java:4068)
     at java.awt.Container.dispatchEventImpl(Container.java:2068)
     at java.awt.Component.dispatchEvent(Component.java:3903)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4256)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3933)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3866)
     at java.awt.Container.dispatchEventImpl(Container.java:2054)
     at java.awt.Window.dispatchEventImpl(Window.java:1791)
     at java.awt.Component.dispatchEvent(Component.java:3903)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:190)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:176)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)Please let me know if you need any additional information.
Thanks,
- Scott -

Use of field 'StartPoint' in work order operation's 'Dates' tab

Hi,
Can someone please explain me on the uase of field 'StartPoint' on work order operation's Dates tab.
Regards.

Start point will be used in case of scheduling for the operation.
By mentioning the condition & date, while doing automatic scheduling, system will change the start date of the operation & correspondingly finish date.
Note: This will work only when Automatic scheduling is ticked for the control key.
Regards,

How to Create New Activity Type for Assiged to work centre Costing in Acti

Dear Sir,
We have four activity type to assigned in workcentre Costing Activity. Details are as under
AIRJET     2010     AIRJET
DONIER     2010     DORNIER
SULTEX     2010     SULTEX
SULZER     2010     SULZER
in addition one more loom is comming in our unit and require new activity type.
How can i create new.
Please guide.
Thanks in advance
Regards
Ajit

Dear ,
To create new Activity Type , you need to follow the below steps :
KA01 - Create Primary Cost Element for the new activities type.
KL01 - Create Activity Type tied to the primary cost element.
KP26 - Change Activity Type/Activity Price Planning - maintain the Variable price
Assign the activity type to cost center using T code KP26.
In the input screen of T code KP26 ,enter version as 0, from period 1 and to period as 12 and the Fiscal Year as 20xx.
Click on Overview tab on top and key in costing details in this screen.
After performing this ,while creating the work center ,this combination of activity type & cost center should be assigned.
At work centre level , you should have
1.Create Standrad Value Key -OP19 and Formula Key in OP49.
2.Create Formula Parameters in OP7B or u can use existing one to assing in the Standard Value Key
3.In CR02-Assing the Standard value key in Basic Data and select the Formula Key in Costing tab with cost centre assingement .Save
Try and check
Regards
JH

Difference in Main work centre and Operation workcentre

Hello PM Gurus,
In CS order, we have two work centres. One at header level called as Main work centre and another at operation level.
Why do we have two work centres. The one at operation level itself should have been enough.
There is a main work centre at functional location too ( Organisation tab). So what is the connection if we use this functional location as the reference while creating a CS order.
Please reply soon.
Cheers
Sunny

Hi Sunny,
The work center at haeder i.e., Main Work Center is the reponsible work center(say a department). It means it takes the reponsibility of the whole job mentioned in that work order(or job given by production dept.). Now, assume , it further distributes the whole work to its own sub-dept or different work centers as per nature of job. Say, electrical related work to elec work centers etc., by ,means of assigning to different operations.
The Main work center's cost center will be copied as responsible cost center in Additional data TAB of the order.Now thus you see commercially the responsibility of doing the job lies with the responsible cost center (or say Main work center).
Hope it is clear.
Regards,
Rajesh

Work centres operator linkage

Hi,
My client wants in CO11n screen, where we select employee ID by pressing F4, client should get get only those operators ID to be listed who are assigned to this work centre.
Is it possible? But to get this I should assign in my work centre the names of three operators who will work on 3 different shifts or else who all are possibly be working in this work centre( my work centres are not asigned to any shift, they are available 24 hrs in a day) but where and how to assign?
Regards.

Yasir ,
We have the same kind of requirement in our case.We developed ZCO11N where operator id /supervisor id ,list of work centre (Asset number ) are added with SAP Tables.U need to discuss with SAP ABAP Developer
More oever , in ECC 6.0 version , for CO11N u have option at Personal Data Tab at the bottom of the screen where u can include the Person Name/Work Centre /Posting Dates/Plant available .
I hope this itselg will solve your problem.Let me know if you want ZCO11n functionality .
regards
Jia
Edited by: Jiaul Haque on Dec 24, 2008 8:41 AM

Can't see data in data tab when there is a "." in table name

Hi,
I have a problem with SQL Developer 2.1 (this works with 1.5).
When there is a dot (".") in table name, we can't see data in data tab (we have no synonyms so it's not same bug).
If I try to export data on same table, in "WHERE" tab, I can see sample !
Any idea ?
Thanks

logged
Bug 9393866 - datatb shows no columns for table name containg [dot]
-Raghu

Power Query/Data Management Gateway data refresh not working

Pretty new to o365/Power BI, but here's what I've got going on (hopefully someone can help me out):
I created a data management gateway and data source. The data source says it's online in the PowerBI admin center, and it seems to be working correctly. I can open Excel 2013 on my desktop (logging in as my trial o365 account which has Power
BI associated with it) and connect to the data source via Power Query using the oData option. I make sure to import the data into the model, and then open up the PowerPivot window and create a simple pivot table using the data in the model.
that all works just great. The problem comes when I upload the workbook and try to update it. I've tried a few different ways.
1. When I try to manually refresh the workbook by opening it in my o365 site and going to data-->refresh I get the following error:
      An error occurred while working on the Data Model in the workbook. Please try again.
      We were unable to refresh one or more data connections in this workbook.
      The following connections failed to refresh:
      Connection: Power Query - dbo_DimProductCategory
      Error: Out of line object 'DataSource', referring to ID(s) 'a75593f3-c34d-4f83-9458-49aa2cece164', has been specified but has not been used.
      The following system error occurred: Class not registered
      The provider 'Microsoft.Mashup.OleDb.1' is not registered.
      Power Query - dbo_DimProductCategory
2. When I go into Power BI and go to "Schedule Data Refresh" for the workbook, I get the following error:
      Sorry, the data connections in this report arenâ€™t supported for Scheduled Refresh.
      Technical Details â–¼
      Correlation ID: B3CE4B10-2137-E593-6FCF-189B73465190
      Date and Time: 03/31/2014 06:20:39 PM (UTC)
Any help would be greatly appreciated. If you need additional information, I'd be happy to provide it.

Hey Guy,
Thanks for the reply.
The "data source type" of the data source in Power BI is "SQL Server" (there was only that and Oracle available to select from)
The "data source type" that Power Query is using in Excel is "From oData Feed"....which is using the Power BI data source....which is using the data management gateway.
A few follow up questions if you have a second
1. Do you know when PowerQuery data refresh will be supported? (just a general idea....weeks, months, next year?)
2. Is there any other way to connect to (and be able to refresh) PowerBI data sources referencing "on prem" data via the data management gateway? I tried using the oData feed URL in non-PowerQuery areas of excel (excel data tab, PowerPivot directly)
but it didn't work. If there's some other way to connect to and refresh on prem data, i'm all ears :D
Really appreciate your help, thanks for taking the time.

00933 error when clicking on the data tab for the selected table

Hi,
I'm getting the following error when selecting a table from the tree view then clicking on the data tab:
An error was encountered performing the requested operation:
ORA-00933: SQL command not properly ended
00933.00000 - "SQL command not properly ended"
*Cause:
*Action:
Vendor code 933
The exact same tables created from sqlplus for a different user in the same database work fine. Note, I'm not typing any SQL in myself. It would appear this happens on all tables created as this user. I cannot see any difference between permissions for this user and others which work but the failing user does have a "-" in the username and password which I'm suspicious of.
This is SQL Developer v 1.2.0 (build 29.98) (the most recent I believe, Oracle Database 10g Express Edition Release 10.2.0.1.0 and Linux ubuntu.
Thanks
Martin

"-" is not allowed in identifiers and is almost certainly the cause of your problem. This can be got round by quoting i.e. using "STUPID-NAME" instead of STUPID-NAME.
I'm slightly surprised that SQLDeveloper doesn't quote the statement. Perhaps it quotes table names but not user names.

I can no longer open a new tab by clicking on it or by using file and new tab menu, so what do I change or reset for new tabs to work?

The tabs were working fine, but now tabs will not open when I click on the 'open a new tab + ' button, or if I go to 'file, new tab'. A new tab only opens when I click a link, but I cannot open a tab at will to start a new page. I used your troubleshooting data, but it did not help. I checked tabs settings in Options and all is checked, and I even reinstalled firefox. What do I do to reset or change settings so the tabs will open?

There is a reported incompatibility between the Ask Toolbar and Firefox 3.6.13 that causes new tabs to not open. This problem needs to be fixed by Ask; they need to update their toolbar add-on for Firefox. Until the incompatibility is fixed by Ask, you can disable the Ask Toolbar or un-install it from your system.
*http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
'''Other issues needing your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins. 
 
*Adobe Shockwave for Director Netscape plug-in, version 11.5.9.615
**'''''Security release version 11.5.9.620 released 2011-02-08'''''
*Shockwave Flash 10.1 r85
**Several updates behins
**'''''Security release version 10.2.152.26 released 2011-02-08'''''
*Next Generation Java Plug-in 1.6.0_23 for Mozilla browsers
**'''''Security release version 1.6.0_24 released 2011-02-10'''''
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org
#*Java Test: http://www.java.com/en/download/help/testvm.xml

How to pass variable to data tab which replace text in Word attachment

Dear ABAP folks,
I use METHOD cl_gui_frontend_services=>gui_upload to upload my word doc in BINARY and sucessful sent this word doc as attachment with Thomas Jung's FUNCTION 'Z_E_KEG_SEND_SIMPLE_EMAIL'.
However, inside the word file, i need insert varible personnel number p0000-pernr.
*How to pass the value p0000-pernr to data tab (lt_data) which replace symbol text &s_pernr& in doc before created as attachment ? *
I try 'SCMS_BINARY_TO_TEXT' and 'SCMS_BINARY_TO_STRING'    but fail.
Need expert 's help.
Thanks & Rgds,
Felice
Below are my code:
** Upload file to read data as binary
    CALL METHOD cl_gui_frontend_services=>gui_upload
IF lt_data[] IS NOT INITIAL.
    CALL FUNCTION 'SO_SPLIT_FILE_AND_PATH'
     EXPORTING
        full_name     = lv_filename
      IMPORTING
        stripped_name = lv_str_filename
      EXCEPTIONS
        x_error       = 1
        OTHERS        = 2.
    SPLIT lv_str_filename AT '.' INTO lv_junk lv_filetype.
    ls_attach-type = lv_filetype.
    ls_attach-subject = lv_str_filename.
    ls_attach-CONTENT_HEX[] = lt_data[].
    APPEND ls_attach TO lt_attach.
    CLEAR ls_attach.
ENDIF.
CALL FUNCTION 'Z_E_KEG_SEND_SIMPLE_EMAIL'
EXPORTING
REQUESTED_STATUS = 'E'
DOCUMENTS = lt_attach
RECIPIENTS = lt_rec
MESSAGE = t_objtxt
SUBJECT = 'Confirmation Review'.
COMMIT WORK.
clear lt_rec.
clear ls_rec-i_copy.

Dear Luigi,
Do you have sample code which replace the value in Word file ?
I try sample code below, but the mergefield 'Title' in Word file not replace instead it override the whole file.
Even i try with different download path, it also not update field 'Title'.
The mergefield i insert by microsoft word > mailings > insert merge field >Title.
report ztestmail_c.
data: global_filename LIKE RLGRAP-FILENAME.
data: begin of imerge occurs 0,
Title(85) type c, field02(85) type c,
field03(85) type c, field04(85) type c,
end of imerge.
data: begin of itabf occurs 31,
ff(10),
end of itabf.
itabf-ff = 'Title'. "append itabf.
imerge-Title = 'test0'.
append imerge. clear imerge.
global_filename = 'c:\temp\confirm-form0508.doc'.
CALL FUNCTION 'WORD_OLE_FORMLETTER'
EXPORTING
WORD_DOCUMENT = global_filename
*   hidden        =
*   word_password =             "               Password for the mail merge file (.DOC)
*   password_option = 1         " i             Controls password use
*   file_name = 'confirm-form0508'               " rlgrap-filename Name of download file (w/o ext.)
*   new_document =              "               Create new Word document
DOWNLOAD_PATH = 'C:\temp\confirm-form0615.doc'
TABLES
DATA_TAB = imerge
FIELDNAMES = itabf
EXCEPTIONS
INVALID_FIELDNAMES = 1
USER_CANCELLED = 2
DOWNLOAD_PROBLEM = 3
COMMUNICATION_ERROR = 4
OTHERS = 5.

Tehnical data tab in work centre.

Similar Messages

Maybe you are looking for