Tektronix AFG 3022: How to use both channel with VISA

Hi all!
I am trying to control the AFG with LabView using the NI VISA driver. There are several given VIs I can use, but I don´t know how to use both channels at the same time correctly. I attached a VI I made.
Problems are:
-Sometimes it works, sometimes random errors occur.
-The waveform generation doesn´t start at the same time.
-To stop the waveform generation I used the "initialize VI" because I found no better one. Else the generation goes on and on, even though the task was terminated in LabView.
-How can I trigger the AFG with my NI 6259 in LabView?
I hope someone has some good ideas helping me out...
Best regards
Yopp
Attachments:
AWG_out_pulse_2ch.vi ‏36 KB

Hi Benjamin,
thanks for the replay. You helped me out very good! I had the Visa driver. I downloaded the driver in your link and it´s way better (more functionality) than the one I used. I now have a configuration, which is working. But there are two things I still doen´t know:
- How can I put out a trigger signal on the NI 6259. Am I doing this over the normal daqmx VIs? (I, by now, didn´t have the time to try it myself, maybe someone can give me a hint. Saves time...)
- I want to create two signals on the AFG that are the same, but one is inverted. At the AFG it is no problem (output menu-> invert on/off). This function doesn´t seem to be available in the driver. Is there a possibilty to modify the driver and create a VI with that functionality? Can anyone do this for me or explain to me what I need to do it myself and how to do it?
Best regards
Yopp

Similar Messages

How to use multiple channels with one remoteObject .

hi,
I have an application which is accessed through HPPS some
times , also it can be access on server with http service.
so I want to know how to configure config files or add
runtime channels which will support either channel depending on
the server it is accessed over.
Is there any one who can help me to solve this...i need it
soon.
thank you...

Hi,
Please visit the URL below for details on adding channel sets
at runtime. Add multiple channels to the channel set so that the
fall back mechanism works.
http://livedocs.adobe.com/blazeds/1/blazeds_devguide/runtimeconfig_5.html#194376
Hope this helps.

How to use session variable in JSP function & How to use both JSP Servlet

Hi,
I am new to JSP and servlets
Still I am devloping a website in JSP. I am not mixing JSP with servlets, but I do create Java files for bean, logic and database works.
I try to keep the hard coding part out of JSP.
I dont how to use both JSP and Servlets in combination.
Hence If needed I write some functions in JSP.
but it gives me error
+<%! public void abc()+
+{+
int intUserId = Integer.valueOf((Integer) session.getAttribute("MySession_UserID"));
+}+
+%>+
Saying cannot find symbol session
1) So can u please tell how can I access session variables within JSP function
2) And also give me some links/tutorials about useing both JSP and Servlets in combination.
Thanks
Venkat

The application architecture when you use Servlets and JSP in a standard MVC pattern is explained here (under the heading "Integrating Servlets and JSP Pages") and here ...

How to use both functions

hi all i want display starting letter pf each word in capital .
for this am using <?xdoxslt:init_cap(field name')?>
but it is converting only when complete field is in lower case if not it is displaying the field with out any conversion.
So i want convert the lower function on the field but how to use both lower and initcap functions at a time in xml word (for rtf)Kindly help me ion this
thanks for all in advance.
Edited by: maddy on 20 Apr, 2012 3:47 AM

I tested the init_cap function and it converts data correctly even if the text was all uppercase or lower case.
Can you provide a data sample where this function didn't work for you?
Use this to combine the functions: <?xdoxslt:init_cap((xdoxslt:convert_case(Description,'lower')))?>
Thanks,
Bipuser

Can I playback in both channels with my audio interface?

From what I've found so far I'm afraid the answer is already "no" but I have to ask for myself.
When I record into QuickTime movie (not Pro) using my Alesis IO|14 Firewire interface, it only plays back on the left channel.
Is there ANY way to get it to play back on both channels? (Or is this a sneaky way of urging us to upgrade to QT Pro?)
I'm assuming the audio quality of my M-Audio Nova condenser mic is better than my iMac's built-in mic, which is why I'd really like to do this. I don't even need true stereo, just both channels playing back.
(QT 10.1, on Lion)
Thanks.

The mic and interface record just fine into GarageBand, either as stereo or mono, and plays back out of both channels with the same setup, so I think the problem is with QT.
I don't find any kind of switch like that in the Hardware Direct Monitoring software for the Alesis, but I'll investigate further.
As I mentioned, I've searched this and other forums and it seems like this is just how QT is set up. But I was hoping for some sort of solution.
As previously indicated, I am not familiar with your IO device, so let me ask a few questions here.
1) Is the Nova mic you mentioned mono or stereo?
2) If mono, are you using two of them?
3) If mono and you are not using a pair of mics, does the input interface hardware have the ability to blend left and right (mic 1 and mic 2) input channels?
4) If mono, you are not using a pair of mics, and the device has no ability to blend left and right channels, are you you using an adapter cable to input a split signal to both input channels of the device?
If you are using a mono mic to input a signal to only one channel of the input device and are not/cannot blend this signal to both channels before output via the Firewire cable, then its sounds like your system is working normally and correctly. Basically, the Firewire audio is sent to the QT app as received from the Firewire device and recorded as is in stereo. I.e., if the left channel is active with the mic signal and the right channel is empty, then the audio is recorded only to the left channel and the right channel records the "nil" signal/nothing. On the other hand, GarageBand is an audio editor designed specifically to blend, pan, duck, filter, and/or otherwise taylor audio content as desired by the user. (I.e., which includes the ability to re-channel a single mono audio channel to both channels of a stereo track during the recording process which the QT app can't do.) In short, both apps are doing what they are designed to do as they were designed to do it. As such and as previously noted you have three basic options here.
1) You force the IO device to send stereo or two-channel mono audio to your Mac by using two separate mics, use a single stereo mic with dual channel audio output, using an adapter cable to split the single mono mic audio output line into two separate lines to be plugged into both channels of your IO device, or you can apply/blend the active channel to left and right Firewire output channels within the device if it has this capability.
2) You can use GarageBand to do create and export audio recordings instead of the QT app, or
3) You can purchase QT 7 Pro in order to fix your left channel problem post recording by simply applying the left channel audio to both left and right channels within the audio track so it will play as you want in any media player on your computer.
(Actually, there is a fourth option if you are using an external amplifier for playback, which is to simply use the output amplifier to accomplish re-channelization during playback rather than actually fixing the media file with QT 7 Pro.)

How to use Oracle partitioning with JPA @OneToOne reference?

Hi!
A little bit late in the project we have realized that we need to use Oracle partitioning both for performance and admin of the data. (Partitioning by range (month) and after a year we will move the oldest month of data to an archive db)
We have an object model with an main/root entity "Trans" with @OneToMany and @OneToOne relationships.
How do we use Oracle partitioning on the @OneToOne relationships?
(We'd rather not change the model as we already have millions of rows in the db.)
On the main entity "Trans" we use: partition by range (month) on a date column.
And on all @OneToMany we use: partition by reference (as they have a primary-foreign key relationship).
But for the @OneToOne key for the referenced object, the key is placed in the main/source object as the example below:
@Entity
public class Employee {
@Id
@Column(name="EMP_ID")
private long id;
@OneToOne(fetch=FetchType.LAZY)
@JoinColumn(name="ADDRESS_ID")
private Address address;
EMPLOYEE (table)
EMP_ID FIRSTNAME LASTNAME SALARY ADDRESS_ID
1 Bob Way 50000 6
2 Sarah Smith 60000 7
ADDRESS (table)
ADDRESS_ID STREET CITY PROVINCE COUNTRY P_CODE
6 17 Bank St Ottawa ON Canada K2H7Z5
7 22 Main St Toronto ON Canada L5H2D5
From the Oracle documentation: "Reference partitioning allows the partitioning of two tables related to one another by referential constraints. The partitioning key is resolved through an existing parent-child relationship, enforced by enabled and active primary key and foreign key constraints."
How can we use "partition by reference" on @OneToOne relationsships or are there other solutions?
Thanks for any advice.
/Mats

Crospost! How to use Oracle partitioning with JPA @OneToOne reference?

How to use my itunes with a new pc

how to use my itunes with a new pc?

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
tt2

How to use File Adapter with hierarchial Structure?

Hi,
How to use File Adapter with hierarchial Structure like..
Data:
--Header Details:
Line Item Details:
Data
Bcoz I am getting a Flatfile in a hierarchial way as shown below.
Header Details :1
Line Item a
Line Item b
Header Details :2
Line Item c
Line Item d
Kishore

Hey Kishore,
In order to create a structure you need to use the file with convertion mode on the sending communication channel of the file adapter.
check the link for the needed configuration paramters.
If the structure is more complexed you can use the Contetnt master(CM) from itemfield which allows to ceate XML file from complex flat files and more.
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm">File sender adapter</a>
If you have any question i'll be more than happy to assist.
Nimrod Gisis

How to use java integrate with ondemand

Hi All,
As i'm new to integration, can anyone help me to use java integrate with ondemand that inserts some records in ondemand and deletes some records from ondemand in secheduled interval basis.?
Thanks in advance..!
regards
sowm

Greetings,
hi forum...
how to use Java WebStart with EJB ? examples ?Well, for starters these are complementing, not 'cooperating', technologies. I presume, since EJB's do not - directly, at least - communicate with a web browser, that you intend for "Java WebStart" to somehow invoke an EJB?? Java WebStart is a technology for running client-side (Java) applications from the web browser - perceptively, the application resides on the server, but technically it, like an applet, is downloaded to the client and run there. Unlike an applet, however, it is not constrained by "sandbox" restrictions and does not have to be re-downloaded each time it is invoked - though the process allows for automagically updating the client-side with new versions of the application. ;) So, with this in mind, to "use Java WebStart with EJB" means little more than deploying an EJB client application with Java WebStart as the distribution channel.
thanks
minduRegards,
Tony "Vee Schade" Cook

How to use Java WebStart with EJB ?

hi forum...
how to use Java WebStart with EJB ? examples ?
thanks
mindu

Greetings,
hi forum...
how to use Java WebStart with EJB ? examples ?Well, for starters these are complementing, not 'cooperating', technologies. I presume, since EJB's do not - directly, at least - communicate with a web browser, that you intend for "Java WebStart" to somehow invoke an EJB?? Java WebStart is a technology for running client-side (Java) applications from the web browser - perceptively, the application resides on the server, but technically it, like an applet, is downloaded to the client and run there. Unlike an applet, however, it is not constrained by "sandbox" restrictions and does not have to be re-downloaded each time it is invoked - though the process allows for automagically updating the client-side with new versions of the application. ;) So, with this in mind, to "use Java WebStart with EJB" means little more than deploying an EJB client application with Java WebStart as the distribution channel.
thanks
minduRegards,
Tony "Vee Schade" Cook

How to use the namespace with a parser?

I want to use the namespace in my project. For this reason, I use a sample
from
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/sax/7b_pe.html
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/dom/5_ns.html
to test my understanding.
The slideshow2.dtd refer to the definition in 'xhtml.dtd'. Because in these
two files, they all use the 'title' as the element names. To solve these
conflicts, The namespace is used to qualified the one in slideshow2.dtd.
But the parser still complain that the 'title' in slideshow2.dtd is declared
more than once.
I use apache's Xerces.
I want to know if Xereces realy support namespace spec. now, or how to use
the namespace with a parser. Can anyone kindly tell me where to find some
material that demo the use of namespace in Java program.
Thanks for any help!!!
#############FILE: slideshow2.dtd ###############
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT slideshow (slide+)>
<!ELEMENT slide (title?, item*)>
<!ENTITY % xhtml SYSTEM "xhtml.dtd">
%xhtml;
<!ELEMENT title (#PCDATA)*>
<!ATTLIST title
xmlns CDATA #FIXED "http://www.example.com/slideshow"
>
<!ELEMENT item (#PCDATA)>
##############FILE: xhtml.dtd #########################
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT html (head)>
<!ATTLIST html
xmlns CDATA #FIXED "http://www.example.com/xhtml"
>
<!ELEMENT head (title,style*)>
<!ELEMENT title (#PCDATA)>
<!ELEMENT style (#PCDATA)>
#############FILE: slideshow.xml ####################
<?xml version='1.0' encoding='utf-8'?>
<!DOCTYPE slideshow SYSTEM "slideshow2.dtd">
<slideshow>
<slide>
<title xmlns="http://www.example.com/slideshow">Wake up to
products!</title>
</slide>
</slideshow>

I want to use the namespace in my project. For this reason, I use a sample
from
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/sax/7b_pe.html
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/dom/5_ns.html
to test my understanding.
The slideshow2.dtd refer to the definition in 'xhtml.dtd'. Because in these
two files, they all use the 'title' as the element names. To solve these
conflicts, The namespace is used to qualified the one in slideshow2.dtd.
But the parser still complain that the 'title' in slideshow2.dtd is declared
more than once.
I use apache's Xerces.
I want to know if Xereces realy support namespace spec. now, or how to use
the namespace with a parser. Can anyone kindly tell me where to find some
material that demo the use of namespace in Java program.
Thanks for any help!!!
#############FILE: slideshow2.dtd ###############
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT slideshow (slide+)>
<!ELEMENT slide (title?, item*)>
<!ENTITY % xhtml SYSTEM "xhtml.dtd">
%xhtml;
<!ELEMENT title (#PCDATA)*>
<!ATTLIST title
xmlns CDATA #FIXED "http://www.example.com/slideshow"
>
<!ELEMENT item (#PCDATA)>
##############FILE: xhtml.dtd #########################
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT html (head)>
<!ATTLIST html
xmlns CDATA #FIXED "http://www.example.com/xhtml"
>
<!ELEMENT head (title,style*)>
<!ELEMENT title (#PCDATA)>
<!ELEMENT style (#PCDATA)>
#############FILE: slideshow.xml ####################
<?xml version='1.0' encoding='utf-8'?>
<!DOCTYPE slideshow SYSTEM "slideshow2.dtd">
<slideshow>
<slide>
<title xmlns="http://www.example.com/slideshow">Wake up to
products!</title>
</slide>
</slideshow>

How to use union statement with declare & set function?

Hi Experts,
i have small query about how to use union statement with declare & set function?
Example as below :
DECLARE @name AS date
Declare @name2 AS date
/* SELECT FROM [2013].[dbo].[OINV] T0 */
/* WHERE */
SET @name = /* T0.DocDate */ '[%1]'
SET @name2 = /* T0.DocDate */ '[%2]'
select '2013',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2013.dbo.orct t1
inner join 2013.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2013.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2013.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2013].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between [%1] and [%2]
Union
/* SELECT FROM [2014].[dbo].[OINV] T0 */
/* WHERE */
SET @name = /* T0.DocDate */ '[%1]'
SET @name2 = /* T0.DocDate */ '[%2]'
select '2014',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2014.dbo.orct t1
inner join 2014.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2014.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2014.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2014].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between [%1] and [%2]

You have to create stored procedure in SQL only .
Like u must have create for Crystal .
You can execute procedure in query manager but you have to enter parameter manually..
example
Exec @Test '20140101' '20140501'
Every time user has to enter it manually in yyyymmdd format in case of date parameters.
Example
Create Proc [@Test]
as begin
DECLARE @name AS date
Declare @name2 AS date
/* SELECT FROM [2013].[dbo].[OINV] T0 */
/* WHERE */
select '2013',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2013.dbo.orct t1
inner join 2013.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2013.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2013.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2013].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between @Name and @Name2
Union
/* SELECT FROM [2014].[dbo].[OINV] T0 */
/* WHERE */
select '2014',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2014.dbo.orct t1
inner join 2014.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2014.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2014.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2014].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between
between @Name and @Name2
end

How to use Stylesheet (XSL) with JSPX ?

Hi!
How to use XSL stylesheets with JSPX pages?
I want use an xsl transformations with jspx pages, I tried using the following syntax, but it didn't work....
<?xml version='1.0' stylesheet type="text/xsl" href="mathml.xsl" encoding='UTF-8'?>
<tr:html xmlns="http://www.w3.org/1999/xhtml">
what is the best way to use xslt with jspx pages?
Thanking you in advance,
Samba

Thanks Ric,
But My problem is not solved..
I'm getting the transformation working in plain HTML
The file given below :
<?xml-stylesheet type="text/xsl" href="mathml.xsl"?>

<html xmlns="http://www.w3.org/1999/xhtml"
>
<head>
<title>Content MathML Examples</title>
</head>
<body>
<div style="border-style:solid; border-width:1px; margin: 1em 1em 1em 1em; padding: 1em 1em 1em 1em;color:gold;background:grey;">
<pre><![CDATA[<math xmlns="http://www.w3.org/1998/Math/MathML">
<apply>
<eq/>
<apply>
<abs/>
<ci> x </ci>
</apply>
<piecewise>
<piece>
      <apply><minus/><ci> x </ci></apply>
      <apply><lt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <cn> 0 </cn>
      <apply><eq/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <ci> x </ci>
      <apply><gt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
</piecewise>
</apply>
</math>]]>
</pre>
<math xmlns="http://www.w3.org/1998/Math/MathML">
<apply>
<eq/>
<apply>
<abs/>
<ci> x </ci>
</apply>
<piecewise>
<piece>
      <apply><minus/><ci> x </ci></apply>
      <apply><lt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <cn> 0 </cn>
      <apply><eq/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <ci> x </ci>
      <apply><gt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
</piecewise>
</apply>
</math>
</div>
</body>
</html>But the same thing is not working when put in jspx page..
And I tried to use JSTL as you have suggested :
But the content is not getting transformed.
Here is the jspx page :
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
          xmlns:h="http://java.sun.com/jsf/html"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
          xmlns:c="http://java.sun.com/jsp/jstl/core"
          xmlns:x="http://java.sun.com/jsp/jstl/xml"
          xmlns:m="http://www.w3.org/1998/Math/MathML"
          xmlns:xh="http://www.w3.org/1999/xhtml">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
    <af:document binding="#{backing_xsltTest.document1}" id="document1">
<div style="border-style:solid; border-width:1px; margin: 1em 1em 1em 1em; padding: 1em 1em 1em 1em;color:gold;background:grey;">
<f:verbatim>
<pre><![CDATA[<math xmlns="http://www.w3.org/1998/Math/MathML">
<apply>
<eq/>
<apply>
<abs/>
<ci> x </ci>
</apply>
<piecewise>
<piece>
      <apply><minus/><ci> x </ci></apply>
      <apply><lt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <cn> 0 </cn>
      <apply><eq/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <ci> x </ci>
      <apply><gt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
</piecewise>
</apply>
</math>]]>
</pre>
</f:verbatim>
<c:import var ="mathml" url="/mathml.xsl"/>
<x:transform xslt="${mathml}">
<math xmlns="http://www.w3.org/1998/Math/MathML">
<apply>
<eq/>
<apply>
<abs/>
<ci> x </ci>
</apply>
<piecewise>
<piece>
      <apply><minus/><ci> x </ci></apply>
      <apply><lt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <cn> 0 </cn>
      <apply><eq/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <ci> x </ci>
      <apply><gt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
</piecewise>
</apply>
</math>
</x:transform>
</div>
      <af:form binding="#{backing_xsltTest.form1}" id="form1">
      </af:form>
    </af:document>
</f:view>

</jsp:root>Can you please suggest where I'm doing wrong?
Thanking you in advance,
Samba

Does anyone know step by step how to use a PC with an AppleTV?

Does anyone know how to use a PC with an AppleTV and can this be done and if so, how?

Welcome to the Apple Community.
How far have you got into the set up process please.

How to use facebook + skype with new Ipad? it needs flash player it seems...

how to use facebook + skype with new Ipad? it needs flash player it seems...

get the facebook and skype apps from the app store and there is no need flash.

Tektronix AFG 3022: How to use both channel with VISA

Similar Messages

Maybe you are looking for